Mouse not working when importing timeline from premiere

This actually happens in a number of Adobe operations. Sometimes I can tab from one selection to the next and get by, but with this particular operation, I can only close the window with the mouse.
I actually get past the first import as timeline window where I can select the premiere project file. I then get to select the sequence and that is when I have no mouse control within the window and
thus can not select the sequence. Using the tab or enter keys also does not work. I can only close the window. Any suggestions?

Hello, I just had a problem similar to this: lines appearing everyehere, somestimes the brushdots didnt appear at all, the first line a drew = nothing, second line drew = first line. It was really wierd.
I tried almost everything, from re-installing PS, Going back to vanilla settings, reistalling mouse drivers. But nothing of that worked.
BUT I FINALLY I FOUND A SOLUTION! and it was so easy and obvius that i behind it.
All I had to do was to update my graphicscard driver! Yeah...
I hope it works for you to.
best of luck.
Update NVIDIA driver: http://www.nvidia.com/Download/Scansg.aspx?lang=en-us
Or
Update ATI driver: http://sites.amd.com/us/game/downloads/Pages/downloads.aspx
(If you have the latest driver allready, just re.istall them).
P.S. sorry if my english was a little bad.

Similar Messages

Transferred CS4 to new MacBook Pro, now some fonts will not work when PDFing documents from InDesign CS4. Help!

I recently purchased a new MacBook Pro. I transferred my CS4 from my older MacBook Pro to my new computer, and although it seemed to be working fine now some fonts will not work when PDFing documents from InDesign CS4. These fonts are installed on my new computer, can be found in InDesign CS4, and work fine within the program but will not appear in PDFs. The letters turn into rectangles. Does anyone know why, and how to fix that?
Help/input would be much appreciated. Thank you!
Kristen.

you should properly install adobe products, not move, migrate or otherwise transfer them.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Setting Workflow status not working in imported workflow from SPD to Visual Studio

Hi all,
I have created SPD workflow and imported in visual studio. When I deploy imported Workflow using visual studio feature I found that Setting Workflow Status action is not working. Do I need to change Set Workflow status activity in Visual studio to make it
work.
Rohit Pasrija

Hi,
According to your post, my understanding is that Setting Workflow status did not work in imported workflow from SharePoint Designer to Visual Studio.
I try to reproduce the issue and the result is the same as yours.
After I import the workflow, choose the .xoml file, the view is as below:
To troubleshooting the issue, I add a new item to the project and select “Sequential Workflow” in the template.
After I click the Tool, I find that there don’t have the “SetCustomWorkflowStatus1” activity.
To set the status of the state, we need to use the “Set State” Activity in the “SharePoint Workflow” toolbar.
That is the reason why the “SetCustomWorkflowStatus1” activity does no work.
More information:
Apply Custom Values to Visual Studio Workflow Statuses
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Mouse not working when reinstalling OS X with install disk

I am trying to reinstall OS X 10.3 on iMAC G5 after a hard drive crash with the help of the original install disks, but my wireless mouse does not work anymore. Any ideas how I can solve this or go through the installation process with the keyboard alone? I couldn't find a keyboard shortcut to tab from a list in a window to the select button...

How is your mouse not working? Is it dead?
Is the wireless mouse a Mighty Mouse or a 3rd party mouse?
Does you mouse need batteries?
*Just in case it's dirty:*
http://docs.info.apple.com/article.html?artnum=302417 How to clean your Mighty Mouse
Take a piece of bright white paper, turn the mouse upside down on it, press down on the ball, and run the mouse quickly in circles over the paper. This will remove all the gunk that's building up on the ball
TIP: To get to the gook inside the scroll nipple use a plastic toothpick.
"Other Options:" Wear latex disposable gloves. A box of same can be purchased from your local Dollar Store or Pharmacy.
Some cell phone leather cases actually fit right over the Mighty Mouse.
Clean/wipe the Mighty Mouse off with a damp cloth/rag prior to going to bed each evening.
Some users have found using the small alcohol pads quite successful. These can be obtained from any drug/pharmacy or Dollar Store.
Only do the following if your warranty has run out:
Cleaning inside and dismantling the Apple Mighty Mouse
If so, then I suggest (if your 1 year warranty is not up and/or you have Apple Care Protecton Plan) you call Apple Tech Support & ask for a replacement.
=========================
Mighty Mouse Take Apart Photos

Help! Javascript not working when object moved from one page to another!

Hello all:
I am new to Adobe Livecycle Designer (version 8.0). I have created a 3 page interactive pdf form with numerous objects (text fields, radio buttons, drop-down boxes, etc.), that our business wants to begin using soon.
I am having difficulty with some of my Javascript not working with a few of my objects on page 2 of the form. Specifically, there is a drop-down box for "Country" on page 2 of my form. When the user selects, for example, "United States" from the list, I have Javascript that is supposed to change the "Currency" drop-down box rawValue to "US Dollars" accordingly (upon the change event).
I think my Javascript syntax is proper, but I am not certain. Here is my simple Javascript associated with the "Country" drop-down box (Note: rawValue 80 = "United States" and rawValue 105 = "US Dollars"):
form1.Page1.cmbContactInfoCountry::change: - (JavaScript, client) -
if (this.rawValue == 80) {
     cmbCurrency.rawValue = 105;
This seems pretty straight forward and it WORKS when my "Country" drop-down box is moved to page 1 of the form, but it WILL NOT WORK when I move the "Country" drop-down box back to page 2 of the form (which is where it belongs).
Does anyone have any suggestions or solutions? I have spent probably 6-8 hours racking my brain trying to figure out why it works when on one page, but it does not work when move to a different page. I am guessing that I may have corrupted something OR that I am not fully addressing the proper name of the object?
Please help!
Frustrated and helpless near Chicago!
Taylor T

Hi Jono:
Thank you for your quick reply.I was able to obtain the full name of the cmbCurrency object using the method you taught me. That is brilliant! Great short-cut tool.
Unfortunately, I am still having issues with getting Javasript for the cmbCountry object to work with the cmbCurrency object. I haved pasted my new Javascript below.
JavaScript for cmbCountry object:
//UNITED STATES
if (this.rawValue == 1) {
          xfa.resolveNode("form1.#subform[1].cmbCurrency").rawValue = 1;
else
//CANADA
if (this.rawValue == 2) {
          xfa.resolveNode("form1.#subform[1].cmbCurrency").rawValue = 2;
I have checked the "Specify Item Values" checkbox of the cmbCurrency drop-down object and Value 1 = "US Dollars" and Value 2 = "Canadian Dollars".
When I select "Canada" from the cmbCountry drop-down object, the rawValue of the cmbCurrency drop-down object is changed to "US Dollars" (when it is clearly defined as "Canadian Dollars"). When I select "United States" from the cmbCountry drop-down object, the rawValue of the cmbCurrency drop-down object stays blank for uknown reasons. Very strange.
Since I am not able to further explain in detail on what I am experiencing, I have posted a link to my file below (I just signed up for an account at ShareFile). I would forever be indebted to you if you can help me figure this out!
https://thomptk.sharefile.com/?cmd=d&id=07ede2fe11db4549

Sound not working when watching movies from MacBook Pro 15'' in full screen

after a recent iTunes upgrade the sound will not work when I watch a movie or anything else in iTunes on my Thunderbold Display. I have the 15'' retina MacBook Pro connected to the display and it used to work flawlesly. has anyone had the same problem?

When I upgraded the volume control in iTunes (at the top) defaulted to off (all the way left) so no sound. I just slid the slider all the way to the right. Also be sure display audio is set in the preferences, sound menu

Render quality drops when importing sequences from Premiere Pro CS4

Hello,
I have both AE and Premiere Pro CS4, and, because my Media Encoder doesn't work (a common problem, apparently), I import my sequences into AE to render. However, I've noticed a marked drop in quality in the sequence when imported into AE as opposed to when it's in Premiere Pro. It's comparable to a "Full" dropping to a "Half" when changing preview render quality in AE. What am I doing wrong? Is there some simple way to match the quality of the AE Comp (that has the PP sequence in it) to what the original Premiere Pro project has? Should I not be putting the PP project into a new comp in AE before I render it out? Is there another way that can retain the quality of the original Premiere Pro project?
This is urgent, as I need this rendered by Monday. Any help would be appreciated! Obviously, this is the first major project I've done this "workaround" with. I wish AME worked, but it doesn't for me.
Thanks!

By default, the Ram preiew resolution is adaptative and not full quality, as it's just to "preview". You can switch this behavior to full quality, and by default, when you render, it will always be "Full quality" before being compressed by your output module.
You can check the Ram preview doc and the rendering doc from the AE help.
Hope that helps,
Seb

The SQL statement is not valid - when importing data from SQL Server using a query

Hi there,
I am trying to import data from SQL to Power Pivot using a SQL query like below:
SELECT Score.FieldCount, Score.Record.GetAt(0), Score.Record.GetAt(1), Score.Record.GetAt(2), Score.Record.GetAt(3), Score.Record.GetAt(4)
FROM
SELECT * FROM dbo.CLR1(
dbo.CLR2('c:\FILES\Test.xml'),
'SELECT * FROM [dbo].[CXCustomer_Small]') Input
) Score
And when I tried to validate it, it returns
The SQL statement is not valid. A column name cannot be blank.
I ran the above SQL statement in Management Studio and it works without problem. Any idea?
Thanks!
Chu
-- Predict everything. http://www.predixionsoftware.com

Never mind, I figured out - I need to give each column a name.
-- Predict everything. http://www.predixionsoftware.com

IPhoto not responding when importing photos from Canon Powershot SD450

Recently I have been unable to import photos from my camera. I can see the thumbprints but when I try to import iPhoto hangs and has to be force quit? I am able to take the SD Card and insert it into an SD card reader, so there is no problem with the SD card.
The following message appears in the Console log:
10/28/08 1:56:53 PM iPhoto[61816] Error loading /Library/Contextual Menu Items/DocumentsToGoXCM.plugin/Contents/MacOS/DocumentsToGoXCM: dlopen(/Library/Contextual Menu Items/DocumentsToGoXCM.plugin/Contents/MacOS/DocumentsToGoXCM, 262): no suitable image found. Did find:
/Library/Contextual Menu Items/DocumentsToGoXCM.plugin/Contents/MacOS/DocumentsToGoXCM: unknown file type, first eight bytes: 0x4A 0x6F 0x79 0x21 0x70 0x65 0x66 0x66
Anyone know if this DocumentsToGoXCM.plugin is related to the DocumentsToGo program for Palm PDAs (which I have)? And why would it be involved with iPhoto?

Patricia
Anyone know if this DocumentsToGoXCM.plugin is related to the DocumentsToGo program for Palm PDAs (which I have)?
Sure seems like it.
And why would it be involved with iPhoto?
May not be.
I am able to take the SD Card and insert it into an SD card reader, so there is no problem with the SD card.
Can you import from it there?
Regards
TD

Flex application not working when deployed run from Server

Hi,
I have Flex application which takes a parameter from user, makes a web-service call and returns the message.
This application is running perfectly when I launch from IDE.
But when I copy the files from bin-release to server and launch it, it gives me no result.
In the crossdomain file on the server which hosts web-service, I have added the my host IP in the
allow-access-from domain tag.
In the initialization method of the application I load crossdomain using following code:
    Security.allowDomain("remoteservername");
    Security.loadPolicyFile("http://remoteservername/crossdomain.xml");
    var request:URLRequest = new URLRequest("http://remoteservername/crossdomain.xml");
    var loader:URLLoader = new URLLoader();
    loader.load(request);
Is there a way I can debug application when running from server?
Please give me some pointer to solve this problem.
Thank you.
Chintan

Alex thanks for reply
The URL for the app is http://<some_IP>/flex_app
<some_IP> is added in crossdomain.
Also we have outbound IP's and of these are also added in the crossdomain file.
This is the current content of crossdomain file:
<cross-domain-policy>
<site-control permitted-cross-domain-policies="master-only"/>
<allow-access-from domain="<some_IP>"/>
<allow-access-from domain="<outbound_IP1>"/>
<allow-access-from domain="<outbound_IP2>"/>
<allow-access-from domain="<outbound_IP3>"/>
<allow-http-request-headers-from domain="<outbound_IP1>" headers="SOAPAction"/>
<allow-http-request-headers-from domain="<outbound_IP2>" headers="SOAPAction"/>
<allow-http-request-headers-from domain="<outbound_IP3>" headers="SOAPAction"/>
</cross-domain-policy>
App runs perfectly fine when launched from Flex Builder.

Magic mouse not working when my computer wakes up from sleep mode sometimes

This does not happen all the time but it is starting to happen more and more. When my iMac is asleep and I wake it up the mouse is non responsive. I have looked at the green indicator light on the magic mouse and it does not respond as well. I have turned the mouse off then back on and that does nothing. I thank this may be a Bluetooth problem because I have tried this with 2 magic mice. The only way I can get it to work is to restart the computer.
Please advise??

I would add the mouse to bluetooth favorites in System Preferences > bluetooth > Highlight mouse on the left > click gear icon below this list > click "show more info" if not already checked > click the gear icon again and "add to favorites".
http://support.apple.com/kb/TA21371
If that doesn't do it then a SMC reset might be in order:
http://support.apple.com/kb/HT3964
Regards,
Captfred
Message was edited by: captfred

LoadmMoive in flash not working when import to Captivate

I have a empty movie clip loading different swf files by clicking different buttons.
It works prefect in flash, but when I import it into captive and publish, it shows nothing......
I am using as3 and captive5.
It would be wonderful if anyone can help me with this problem.
Thanks

Well, the original project is structured a bit differently from the norm. It imports the flv to a playback component, and uses an event listener to navigate to a new URL once the video is finished playing. But I don't know that there's a connection here which would cause the video not to even begin. I don't know if this will help, but FWIW, here's the code:
import fl.video.*;
flvPlayer.source="NEWINTRO.flv"
flvPlayer.addEventListener(VideoEvent.COMPLETE, myHomePage);
flvPlayer.autoPlay= true;
var urlRequest=new
URLRequest("http://www.thewebsite.com/home.htm");
function myHomePage(eventObject:VideoEvent) :void
{navigateToURL(urlRequest, '_self');}
Like I said, locally, it all works flawlessly. Thanks for your help. - Mark

Design view not working after importing project from Flex Builder

After importing a project from Flex Builder to Flash Builder I am no longer able to see anything in the design view. I am using the flex 4.5 sdk.
Any idea how I can get this design view working? I heard it could have something to do with the metadata directory but am slightly lost here?...
Adam

Could you please provide more information as to what exactly are you importing. Also does Design View not lauch at all or does it give errors. Would it be possible for you to share the logs.
Meanwhile you can try cleaning the workspace and importing again to see if that solves the issue.

Mouse not working when connected to Power adapter

Hey there
My mouse works fine when my laptop is running off battery, but when i plug in the power adapter it just doesnt move at all. Anyone know why?
Thanks
iBook G4 Mac OS X (10.3.9)

Recheck your iPod cable, and try to do a Reset and have a charge with an iPod ac charger (not your PC)

Fcp 7 XML not working when importing to Premier CS5.5

It suddenly stopped working, I could import xml's just fine. The only thing I did before it started happening was do maintenance with OnyX.
Its telling me that the PROJECT APPEARS TO BE DAMMAGE. It points to Users, library, caches, temp Items, then project file name.
Things I've tried...Export different xml's, versions 1 thru 5.
Repair disk permissions.
looked at the temp Items folder, and there's no xml file, Just a dinamiclinkmanager file.
Uninstalled cs5.5. Re-install cs5.5 do updates.
To no avail.
It was working perfectly before.
I also started getting an error 24 when trying to install, had to contact adobe they couldn't help me, finally got it back.
More concerned about the xml right now, just mentioned it in case.

The problem is with the recently exported (FCP) xml's, not with Premier. I just Imported an old xml into premier with no issues.

Mouse not working when importing timeline from premiere

Similar Messages

Maybe you are looking for