Mouse over dock icon no longer indicates "application not responding"

A very convenient feature seems to be missing from Snow Leopard. In prior versions, if an application was not responding, holding the cursor over its dock icon would display "[Application] Not Responding" and also an option to Force Quit. This status message does not appear in Snow Leopard.
Are we to assume that if we click and hold on a dock icon and "Force Quit" is presented as an option, that the application has stopped responding?
Suggestions?

drdocument wrote:
Thanks!
So if I click and hold a dock icon and "Force Quit" is shown instead of "Quit" would that indicate that the particular application is in the midst of some process and simply unable to respond?
Should I simply allow more time for the app to finish whatever it's doing?
it could be either. sometimes an application is busy and is showing as not responding but will come out of it after a while. but sometimes it's truly hanging and then you have to force quit it to get rid of it. there is no way to tell just by looking at the dock. give it a bit of time and if it's still not responding then force quit. but if it's happening all the time then you may have problems with your system.
In particular, here, I've launched DiskWarrior 4.2 on a Mini (via Screen Sharing from my Mac Pro) in an attempt to rebuild directory on a My Book 1TB external drive connected by FireWire, which Disk Utility indicates needs repair but DU cannot repair. Ideas?
so what does disk warrior say when you try to rebuild the directory? and you should also verify the internal drive on the mini too.

Similar Messages

Dock icon no longer indicates messages received

I get a sound alert that a message has been received, but it is no longer indicate on the icon in the dock. What's up?

Hi, and a warm welcome to the forums!
Try trashing this file & reboot...
/Users/YourUserName/Library/Preferences/com.apple.dock.plist

Is there a way to remove the text that appears over dock icons when the cursor is over them?

Is there any way to remove the text that appears over dock icons when you hover over them? Or at least make it time out, or become more transparent?

You can do that with the Menu Editor extension - https://addons.mozilla.org/firefox/addon/menu-editor/
This extension has not been updated by its author in a couple of years, but another developer has updated it for Firefox 4, you can get the updated version from http://netticat.ath.cx/MyAddons/MyAddons.htm#3rdpartyaddons

I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding"

I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding" and I try opening it in my Finder and it'll say "The Application 'Safari' cannot be opened." and below that it'll say "-1712" Please help? I would really like to open it again.

The application Safari can't be opened -1712
What to do about "The application 'Safari' can't be opened" -1712 ?

Can't Open 3rd party Apps with my User (Icon Bouncing then Application Not Responding)

Hi
Problem:
I can't Open 3rd Part Apps with my user (FireFox, Chrome, Dropbox, GoogleDrive, Mega, Final Cut Pro X, etc) they just star bouncing and after a while they stop bouncing then i righ click on them and it says "Application Not Responding", but i can open native apps like Safari, iTunes, iMovie, Finder, Settings
Other Events:
-Just Before this happend i was editting a video on FCPX, y export it and tried to upload to Google Drive (in Chrome), when it was uploading I closed FCPX and the uploading stop it at 91%, y tried to reupload but then I realized that this video was in a temp folder and it wasnt there anymore, so I open FCPX to export it again and i couldnt, it was just bouncing and then "App not responding".
-After Installing Yosemite i feelt it slow even after it finished the encriptation File Vault, specially in chrome.
I have tried:
1-Repair Disk Permisions
2-Reset SMC
3-Reinstall FCPX
4-Decrypted the Disk and create another user and i was able to run Chrome, FireFox and FCPX, When I opened FCPX it started but when it was trying to open the project that i was working , it restarted the app and i couldnt open FCPX again, just bouncing and App Not Responding
Any suggestions to keep my User working?
Macbook Pro Mid 2012
-OSX Yosemite,
-16GB Ram1600MHz DDR3
-750GB 5400RPM
-2.9GHz dual-core Intel Core i7 processor (Turbo Boost up to 3.6GHz) with 4MB L3 cache

Yes, as long as you let TM do a full disc backup (that is, you do not exclude anything in the TM backup settings) you will have a backup that allows a full system restore - puts everything back just as it was.
You can also clone your system using the shareware app SuperDuper or the donation-ware app CarbonCopyCloner
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.bombich.com/
Both of these apps will make a true clone (literally, a bit-by-bit copy) of your hard drive onto an external drive. This clone will actually be bootable itself (you plug in the drive and hold the option key during startup then select the clone to boot from). You would boot from the clone, then reverse-clone it back onto your internal hard drive.
If you are really serious about being highly confident of not loosing files, you could use both - I keep a TM backup on one drive, and 2 clones on separate bus-powered hard drives.
P.S. even if you had not had any issues, you really, REALLY should be keeping regular, up to date backups anyway - things go flooey without warning sometimes and you risk loosing everything on your machine if you DON'T keep regular backup copies available.

I can't launch Safari. When I right click on the icon, the "Application not responding" is grey and no matter what method I use to Force quit, I get no response.

I can't launch Safari. When I right click on the icon, the "Application not responding" is grey and no matter what method I use to Force quit, I get no response.

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.Safari.plist. Move the .plist to your desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Microsoft Word Freezing Repeatedly, Application Not Responding

Just wondering if anyone else was having issues with Microsoft Word from MS Office 2008, where you open the application, you type a few sentences, and the application freezes with the spinning circle of death that won't go away until you click the dock where it says "application not responding" and do a force-quit? You can leave the circle spinning for 10-20-30 minutes, and it never goes away.
Now for the weird part--this error only happens for me when I'm using a specific document on my computer. I can open Word, start a new document, type several paragraphs of text, and it works fine. But I've been working on an existing paper for about two months that all of a sudden started causing these freezes/crashes when editing it. It's about 30 pages roughly, no images, no big inserts that would take up a lot of memory (116 kb in size). And up until today, there were no problems. So why all of a sudden can't I edit anything on this paper without freezing the program?! I downloaded the Microsoft Office 2008 Service Pack 1 that was just released after this problem started, and ran all the recent Java and program updates through Software Update with computer restarts. I even copied the text from the Word document I was working on, pasted it into a new document, tried saving it as both .doc and .docx, and again the program still freezes when working with that text in a new file. This one baffles me. It's like the text within a document is somehow freezing the application. One thing I did notice is that the freezes seem to happen when I'm scrolling using a mouse wheel. Not always, but quite a bit. I suppose this is some memory issue related to several pages of text that the program can't render or process when you add new lines of text or scroll, but again, I can't figure why this paper I've been working on for months all of a sudden decided to start freezing Word today. Can you really only have 30 double-spaced pages of text in Word before it crashes?
Looks like I've found my reason to switch to Open Office, since I'm 3-4 days out from a deadline. Any other solution strategies would be welcome. Thanks.

Same problem here - Microsoft Word 2008 (update 12.1.7) will open fine, and then start the spinning pizza of death. Only way out is to force-quit the app. I've tried:
1) deleting plist and font cache files
2) uninstalling MS Office 2008, reinstalling and then re-applying updates 12.1.0 and 12.1.7
3) confirming that Apple's Font Card.app can verify all fonts
No luck. Currently I can't open any MS word doc without the spinning pizza of death.
If you are lucky enough that these symptoms only happen with a specific Word .doc file, I would see if the PC-originator could re-save the file as .RTF and resend. If you can then open it OK, you could revert back to .doc (or .docx) format. RTF format is Microsoft's interchange format. If there are anomalies in the .doc file, saving as .RTF can sometimes clean them up. Once done, you can revert back to native MS Word format.
...b

ITunes 11.2.1 freezes when I connect my iPhone 5. 'Application not responding'

Hi,
Recently I upgraded Mavericks. Since then I cant sync my phone anymore. iTunes works fine untill I plugin my phone. Then the spinwheel comes up and stays there forever. In dock it says 'Application Not Responding'.
iPhone 5, iTunes 11.2.1, Macbook Pro 10.9.3 2.6 GHz 8Gb
Does somebody can help me out? That would be very very nice!

Hi BlackNikes
I had exact same problem, but have now resolved it. If your problem is the same as mine your SyncServices folders have been corrupted while itunes was updated.
See my post or spyder683 post at https://discussions.apple.com/thread/6223064?start=60&tstart=0
I am running Mavericks 10.9.3 and updated itunes to 11.2.0 and then experienced problems with itunes crashing, 11.2.2 didn't resolve the problem. I found iTunes worked fine if all my other devices (iphone, ipad, ipod) were turned off, as soon as I powered any one of them up and itunes detected them over wifi or USB itunes then froze with the dreaded colored ball spinning.
In Mavericks 10.9.3 the SyncServices folder is not visible going into the normal library/Application support folder, your instructions below took me to a different area in the system, or at least made these folders visible. Following your instructions I was able to locate and delete both SyncService & SyncServices folders and I launched iTunes again while my devices were powered up and the issue has gone. Bliss!!!
Many Thanks
spyder683 wrote:
Hi Culero,
The fix of deleting the SyncServices folder is for Mac systems. From your desktop / finder, click the "Go" menu at the top, then "Go to Folder ..." Paste this into the field: ~/Library/Application Support
The SyncServices folder should be in there. I had both a SyncService and a SyncServices folder. The second one should, when deleted, help with the problem you and I both had of iTunes freezing when an iOS device is plugged in.
Hope this helps

IMovie won't open - "Application Not Responding"

I can't get iMovie to successfully launch. When I try, the iMovie program window never shows. Right clicking on the active iMovie icon in the dock shows "Application Not Responding."
I've tried restarting, booting into safe mode, and reinstalling iMovie. No luck.

From what I have been reading from other posts on this forum, the
issue may be caused by the clear history settings. It was suppose
to have been fixed in v30.
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
Type '''about:preferences''' in the address bar and press '''Enter.'''
Select '''Privacy'''.
The button next to '''History,''' select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.

'Application not responding' message

I am new to iChat (and to Macs generally). The other day I tried out iChat (having set up a .Mac account) and everything seemed fine. But ever since then when I launch iChat the Buddies window comes up and the little spinning colour cicle goes round for ever and from the Dock the menu item at the top says 'Application not responding'. I have seen that others have had this problem but I don't seem to be able to access the answers they got. Any help would be much appreciated.

Hi The Old Wreck,
Did you run through these screens ?
http://www.siriusaddict.com/ichat.html
These should have enabled you to type in your Screen Name when you selected the correct account type.
If you are not sure then delete all the .plists for iChat.
This will mean going to /Users/(your Account)/Library/Preferences
(Open your hard drive then Users then your Account (little house iCon) then the Library in there then Preferences)
Find these items
com.apple.iChat.AIM.plist
com.apple.iChat.Jabber.plist
com.apple.iChat.plist
com.apple.iChat.SubNet.plist
com.apple.iChatAgent.plist
Put them in the trash (Delete them)
Try iChat again.
It will make you go through the Start Up screens again.
Also check the Address Book.
Find the Me Card (Head and shoulders icon)
Make sure this shows your details including your @mac name.
2:03 PM Friday; December 29, 2006

Application not Responding - CS5, OS10.6.8

If I have a CS5 application running w/ a document open, and switch to another running application, when I try to go back to the CS5 app (click on the document window or select the icon in the dock), I often get the spinning beach ball and the "Application not Responding" message (if I control/click on the dock icon). I need to Force Quit the app & restart. Happens frequently in InDesign, Illustrator & Photoshop. I'm on a MacPro w/ 6GB ram. Anyone else experiencing this / have a solution? - thanks

John, I deleted Extensis Suitcase Fusion and re-installed InDesign. It worked for a short time and now its crashing again. The crash report is still showing the problem to be Suitcase. What else can I do to get rid of all traces of Suitcase.
Bruno is correct, un-installing InDesign doesn't remove the Suitcase Auto-Activation Plugin from InDesign.
0xa9b9000 - 0xab39ff3 +com.extensis.AutoActivationPlugin.ID7 (3.0.4.11 - 3.0.4.11) <C60215EF-E853-7053-497C-7AC0D279746A> /Applications/Adobe InDesign CS5/*/ExtensisFontManagementIDCS5
I'm not sure why it is indicated with a * instead of a precise folder name, but that's saying there is a ExtensisFontManagementIDCS5 plugin (probably in the Plugins folder!) inside /Applications/Adobe InDesign CS5 that is causing the fault. So if that's still there, remove it. (Perhaps Manage Plugins from Suitcase will do it for you. I'm not really familiar with Suitcase. But you can just remove the file by hand).
By the way:
Version: 7.0.0.355 (7000)
You really should update InDesign to the current patch release, 7.0.4. There are quite a lot of bugs in 7.0.0 that have been fixed. (Perhaps you had updated previously but those were lost with the re-install...)

Downloaded yosemite and mail application not responding? will not open can any one help?

downloaded yosemite and mail application not responding? will not open can any one help?

Restart the machine in Safe Mode and attempt to open each app. Also please explain exactly how you are attempting to open the apps. For example, "When I click the Safari icon on the Dock it bounces but does not open." To start in Safe Mode hold down the Shift key when you hear the startup tone unitl a progress bar appears.

Itunes application not responding when I plug in my iphone

I am on itunes 8.2 and when I plug in my iphone itunes just goes into application not responding.
I wait for a while and then unplug the phone and it goes back to working again.
On the phone there is no "Sync" message. In fact with the phone plugged in I can access the phones apps just as if it was not plugged in.
But initially when I plug it in, it does the double vibrate and shows the charging graphic so I know the cable is ok.
The phone is already on 3.1 apparently because some new features are there... like selecting multiple photos to email.
But I don't recall ever running any updates in itunes to make it use the new software as I read you were supposed to do.
I don't want to upgrade to itunes 9 because I read so many people having problems with it... but I wonder if the phone is no longer compatible with itunes 8.2
Any help is appreciated.
Thanks.
-Jeff

Do you know if the problems people have reported with itunes 9 was before the 9.1 release?
I've heard tons of people saying they were reverting back to itunes 8.2 because 9 was so bad.
Am a bit nervous about that update because of that.
But an applecare guy told me that the 9.1 was supposed to address those issues. I have just not heard anything about that actually fixing things though. Still seems like a lot of people are dreading the new itunes 9.
If you are an itunes 9 user, did you have any problems with it wiping out your library or any terribly long syncing times?
Thanks.

Drag and Drop - Application not responding

Hello,
I have a problem regarding Drag and Drop in Mavericks (but probably all versions):
This is especially concerning Drag and Drop from Mail or Microsoft Outlook to another application (in this case a Java Application).
I know that it's only possible to drag mails to the desktop, where they are saved as an eml file.
My idea was to use the Drag and Drop mechanism as a trigger for calling an Apple Script (out of my Java Application) which saves the selected mail(s) as eml, for my application later picking them up in an defined folder. Basically this works just fine BUT Mail as well as Outlook does not respond to the tell statement of my Apple Script until the dragged mail snaps back to the source application after about 20 seconds. While the Apple Script waits for the mail application to respond, both applications (mail application as well as my own application) show "Application not responding" in dock.
Does anybody have an idea how I can get the mail applications get to respond earlier? Probably a second instance, killing of the drag/drop event or anything else?
Regards
Benjamin

Hi
I am also facing the same problem. Did u find any solution for this problem. If yes, can u post the solution.
Thanx.

Help please-"Application Not Responding" for Safari and Mail

I read in one discussion that if Safari is slow, you can go to Font Book and select the fonts with a bullet to get rid of duplicate fonts. I did that, and then decided to disable some japanese fonts I don't use.
Now Safari and Mail don't work. Mail won't open at all, and Safari launches but doesn't load and I get the spinning wheel.
I used Disk Utility to fix permissions, and that didn't solve the problem, and now my Disk Utility also says "Application Not Responding".
I also went back to Font Book and enabled all the fonts I disabled. Still nothing.
( I can use Netscape-so it's only Mac applications I guess)
Any help is very much appreciated.
Thanks!
powerpc g4 Mac OS X (10.3.2)

I read in one discussion that if Safari is slow, you
can go to Font Book and select the fonts with a
bullet to get rid of duplicate fonts. I did that, and
then decided to disable some japanese fonts I don't
use.
Now Safari and Mail don't work. Mail won't open at
all, and Safari launches but doesn't load and I get
the spinning wheel.
I used Disk Utility to fix permissions, and that
didn't solve the problem, and now my Disk Utility
also says "Application Not Responding".
I also went back to Font Book and enabled all the
fonts I disabled. Still nothing.
( I can use Netscape-so it's only Mac applications I
guess)
Any help is very much appreciated.
Thanks!
powerpc g4 Mac
OS X (10.3.2)
Wow- i fixed it! I remembered that when I was in Font Book originally, there were some fonts disabled, and I enabled them.
I couldn't remember EXACTLY which ones, but I disabled some I thought were the ones, and VOILA!
Mail works, Safari works...what a relief!
And it only took me HOURS...oh well.
If this might help anyone, here are the fonts I disabled again-
BeteNoirA Regular
BoyzRGross
Chrome Yellow
Coventry Garden
FancyPants
HardlyWorthit
PleasinglyPlump
RaggMoppRegular
Anyone know if I should throw these fonts away? maybe a stupid question, but I'm not very good at this stuff and hesitate to change anything.
powerpc g4 Mac OS X (10.3.2)

Mouse over dock icon no longer indicates "application not responding"

Similar Messages

Maybe you are looking for