Mouse Over Image

Example Here
On this website there is a list of different items. Picture
of it and then the name. When you put your mouse over it, an image
shows up where the mouse is, that follows the mouse. Is this
possible to do in Dreamweaver?

Ok, the code attached is the entire source on a page I found.
It was the perfect page for showing me what I want.
Here is a link to
the page.
I copied the entire source and pasted it in a separate .html
on Dreamweaver to look at and mess around with. When I view it in a
browser it looks the same (minus the images) but when I mouse over,
it does show the text it should, but it is surrounded by code, as
if Dreamweaver is not supporting it or something. I think what it
is using is DHTML, is that the reason why it is not working
properly? This was the best I could find on source for what I am
looking for, but I will continue to search.

Similar Messages

I need to attach a pop up or mouse over image to test. How do I go about it?

I need to attach a pop up or mouse over image to text. How do I go about it?

Use Tooltips or CSS Disjointed Rollovers.
http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-1.shtml
http://alt-web.com/DEMOS/CSS-Disjointed-Image-Rollover.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Mouse over images

How can I create a mouse over image that appears below a navigation/menu button?

Hello,
You can have an image filled in the rollover state of the menu item, and that would appear when hovered over the menu item from the front end of the site. Check this related post: http://forums.adobe.com/message/5680522#5680522
Cheers
Parikshit

Mouse-over image resizing in CS4

on my website (www.kogamusic.us) i have an image that changes to another image when mousing over it. the two images are different sizes, so as it is now the second image distorts because it is constrained to the aspect ratio of the first image. My question is, how do i make it so that both images auto-resize depending on the size of the window while keeping the second image constrained and distorting to the size of the first image. I am able to auto resize the first image with with=#% and hight=#%, but i can't figure out where to put html in the correct place to auto-resize (while constrained and distorted) the second image.
this is the code i am looking at:
<a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image2','','DSC03696.jpg',1)"> <br />
<img src="fish pencil.jpeg" name="Image2" width="538" height="830" border="0" id="Image2" /></a><a href="mailto:[email protected]">[email protected]</a></p>
<p> </p>
THANKS!

Hard to say. Just maybe a hickup in the system. The popping up is slightly delayed on about every system but I have never had them not pop up at all.
Anyways, here is a link that pretty much fixes weird stuff happening in Photoshop that is called resetting the Prefs.
http://forums.adobe.com/thread/375776?tstart=0

How to get text when mousing over image?

Hey there, I am extremely new to Flash, but know other Adobe programs so tend to learn quickly.
I desperately need to find out how to get text to pop up when i mouse over PART of the image and i havent been able to find any help online in the last two days (pulling my hair out in stress).
Now i uploaded a rough mock up i did on Photoshop, so you can see when i mouseover the top layer of the cake i need a line to stretch out and the text to pop up at the end of it. Similarly if i moused over the cherry another piece of text needs to come up in the same manor.
Also since i need it to be a website link so what format do i open it with when i go to FILE- NEW?
Honestly thank you so much in advance to anyone that helps

First you have to choose if you want to handle devices. If not and you want to stay in Flash I'll stick on topic.
In the HTML version you could either use a good old fashioned image map (they're still fine in the HTML5 era) or you could use a layering technique (here's a random layering example).
In Flash you can do it a few different ways. If you intend on keeping the image intact as a single object then you'll be essentially doing the same as an image map. You can draw invisible hitareas on the various parts of the object and have those areas trigger a specific function that will display your text. If you break up the image into the separate parts then you can directly assign those parts to fire off a function themselves.
First I'd like to know your desired direction.

Mouse over images not resizing correctly in Safari

I have a series of thumbnail images of different sizes that, by using MouseOver, cause a larger image to appear. Safari only seems to resize "larger" and doesn't resize "smaller" resulting in distorted images. This site works fine in every other browser I can lay my hands on. I have managed to get a similar site to work fine but I don't really see the difference between the two. Any ideas on what I need to do? Site that doesn't work www.IllustriousPlay.com/test/Portfolio.html Site that does work www.IllustriousPlay.com/Page1.html Run your mouse over the various images. (Be warned I'm tinkering with the site, so it may have other things wrong with it.)

Kowhai,
Welcome to Apple Discussions.
I see the distortions.
I am not involved in Web Site design, but will W3C Markup Validation Service help answer your question?
I see Failed validation, 16 errors when I enter your URL.
BTW, I like your colorful illustrations.
;~)

Gallery Mouse Over Images

Hi everyone, I was wondering how this Gallery was done,
When mousing over the thumbnails, the larger image appears
beneath.
http://www.perrelink.com.au/portfolio/portfolio1.htm
Would anyone have a tutorial, or advice on how thats done,
Many thanks,
Terrie

Hiya Nadia, , Yes, I was able to work out how to use the
show/hide to make
a gallery...
Im from Melbourne....... :)
Thanks again for your help,
Terrie
": Nadia : ** Adobe Community Expert **"
<[email protected]> wrote in message
news:ev7jno$3h3$[email protected]..
> Terrie,
>
> Yep, Sinclair and Joe are correct, I used the
Dreamweaver Show/Hide Layer
> behaviour to achieve the effect.
>
> PS: Where are you from in Au?
>
> --
> Nadia
> Adobe® Community Expert : Dreamweaver
> ----------------------------------------
> CSS Templates |Tutorials |SEO Articles
>
http://www.DreamweaverResources.com
> ~ Customisation Service Available ~
>
http://www.csstemplates.com.au
> ----------------------------------------
> ~ Forum Posting Guidelines ~
>
http://www.adobe.com/support/forums/guidelines.html
> CSS Tutorials for Dreamweaver:
>
http://www.adobe.com/devnet/dreamweaver/css.html
>
>
>
>
> "twebber" <[email protected]> wrote in
message
> news:ev67gk$eb8$[email protected]..
>> Hi everyone, I was wondering how this Gallery was
done,
>>
>> When mousing over the thumbnails, the larger image
appears beneath.
>>
>>
http://www.perrelink.com.au/portfolio/portfolio1.htm
>>
>> Would anyone have a tutorial, or advice on how thats
done,
>>
>> Many thanks,
>>
>> Terrie
>>
>
>

How to turn off image info when hovering mouse over image?

I think I must have selected something by accident because now everytime I hover my mouse over an image, I get all this info about that image. I know it can be info will be good to know but I don't want to see it all the time. I can't find anything in the settings that seems like it would be able turn it off.
suggestions?

ress the T key on your keyboard

Metadata ? Login before download? Mouse over image? Three questions...

Three questions:
1) Can I add metadata to pages made with iWeb? Does it have to be done in an external application (and if so why)?
2) I would like to propose a PDF document (a catalogue of services) that can be downloaded from my site but only to visitors who have logged in or at least left their identities (I want to know who has downloaded the catalogue and to be able to contact them afterwards).
3) I want to have a roll-over image which will show a photograph before and after retouching, switching between the two as the mouse cursor goes over the picture. Can I do this in iWeb?
Any ideas?
Many thanks!

2 - as already suggested you can use a form site to create a form to give you the information you need. DYou can add the form to a web page with an HTML Snippet and iFrame code like in this demo page. The code used is also shown. on't know if you can set it up to download the pdf file but you might be able to add a link to the zipped pdf file which would immediately download the file.
3 - to do the rollover that you want would require javascript and a snippet. Do a search in this forum for "rollover" and you'll a number of topics where it's discussed. Cyclosaurus is the resident expert on javascript.
OT

How to stop IE from displaying alt text as tool tip when mouse over image.

I have random images being [B]echo[/B] by a PHP script on a page.
[CODE]<img src="<?php echo $randomImage; ?>" alt="This is alt text" />[/CODE]
The problem is every time you scroll over the image, IE spits out the alt text.
I understand the alt text are meant for accessibility.
So how can I stop this IE behavior with out compromising accessibilty?
Thanks everyone.
Patrick

E. Michael Brandt wrote:
Screen readers whould still read the alt attribute despite the presence of a title attribute. In fact most apparently do not read the Title on an image:
http://www.paciellogroup.com/resources/articles/WE05/forms.html
As always some Screen Reader users can reconfigure the software:
http://www.isolani.co.uk/blog/access/ConfiguringLinksInScreenReaders
So in general I think you are safe doing this, but perhaps others can weigh in here.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia
Thanks very much,
I saw several scripts where Javascript were used.
But your solution is very simple and it works perfectly in IE7, don't know if it works in IE 8.
Thanks again,
Patrick

Mouse Over Image Swap bugged transition problem

I have a question regarding the function of "Import" and "Update" in the properties of an image. I've re-updated the link above to reflect my specific question. In the movie, there are image swap transitions as you scroll over various sections of the home page. These actions are carried out in the target cont_images and cont_images/images for the pictures. I attempted to update one of the photos in the library with a new picture of equal quality and proportions but when I then watch the movie, the action is carried out but in a very un-smooth fashion. The transition can be contrasted here:
http://www.greenworknow.com/Test/2138/flash&html/index.html
vs
http://www.greenworknow.com/Test/2138/flash&html/buggedmain.swf
The bugged transition will be the Adventure tab in the center, right most box. You'll also notice that with the bug it quickly flashes the picture under the "Register" Tab (image_big_2) with the one that was changed being (image_big_3). The part that puzzles me is that it had worked once by simply updating/importing but for some reason no longer does, I believe it lies in the method I'm going about replacing the photo. Also the photo isn't being called externally from a folder as it is built into the library of the FLA. I hope this was all clear enough. If there are any odd parts, I'll be watching the thread to respond if you have a question.
Again, thank you for your continued efforts in helping me, the aid is very much appreciated.
(If you need to download the FLA, there's a link under that index page above to do so)

*bump*
Anyone have an idea? or maybe alternate methods I can try to implement the new images?

Hover mouse over a group photo & individual image pops up?

My project is to do a mouse hover over individual faces on a group photo and display an image of what that person looked like back in high school.
So far I am able to display the persons name as I hover over their face but don't know how to also display their individual image.
I set up an image map with circular hotspots for each face.
Please visit www.phsclassof1956.com/50th_group.html
Any help would be appreciated.

You could do this very easily with Tooltips on an Image Map. See example below and mouse over Image Map of South America.
http://alt-web.com/testing.html
Scripts and documentation here:
http://www.walterzorn.com/tooltip/tooltip_e.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Why does moving the mouse over an IMAQ image display slow the GUI down so much?

I have a large application with several vi's running simultaneously under labview 8.6.1. When I mouse over an image display control in one of the vi's, everything slows down a shocking amount in all the other vi's. The windows task manager does not show a large increase in CPU use. My pc is has a quad cpu with 4GB of RAM, and the CPU and memory loads do not appear to be terribly taxing to the system. However, many of my vi's apparently come almost to a standstill if I just move the mouse in a circle around my image control.
This looks like it is largely a GUI display issue. If I make a new vi and put a while loop in it that only displays the iteration loop number to an indicator, I can see the iterating occurring, then stopping totally when I mouse inside the image display control. When I stop moving the mouse inside the control, or when I move it outside the control, the interation loop number jumps up, as if it had been incrementing behind the scenes the whole time. So only display of the interating was halted.
This problem occurs even if the vi with the image control is not executing. If the vi with the image control is open but not running, and I mouse over the image on it, the other guis all come to a screeching halt.
Does mousing in the image display control really utterly crush all other guis in all other labview windows? Is this an issue inherent to the image display control? If so, is there anything I can do about this?
Also, this issue is not entirely limited to display. I started looking at it in greater detail because this issue also exposed what I think is a race condition in my code. I have a vi that acquires an image from a ccd and puts it into an IMAQ image.ctl. This image then gets passed up to a vi up the call chain, and is put on a queue and sent over to be de-queued by a vi that has the image display control. Here's the kicker: when I mouse over the image display control, the image successfully gets acquired inside the subvi, and if I probe the wire leading to the output IMAQ image display.ctl, I see the image. If I simultaneously probe the wire coming out of the subvi one level up the call chain, the image gets lost about half the time. This only happens if I am mousing in the image display control IN A TOTALLY DIFFERENT AND SEPARATE VI. If I bump up the priority of the ccd image acquisition vi to 'highest priority', the problem only happens about 1% of the time, and I really have to mouse around to make it happen. Still, it's disturbing that mousing in the GUI in one window results in a failure of a separate subvi to simply pass an image up the call chain. I understand that IMAQ images are referenced rather than passed by value, but I don't see why there should be a failure to pass the image up the call chain. I've looked for a race condition, but can't find one.
Eric

I have finally been able to replicate the behavior that you are seeing on another computer once the image was large enough. Here are a few notes about this behavior:
First. The UI only slows down when the images are large, 16 bit images. The reason why this is unique to 16 bit images is that they can only be displayed on the front panel as 8 bit images. The workaround that Weiyuan suggested to change the 16 bit display mapping hints towards the root of the problem...that any time a mouse runs over the indicator, Windows asks the entire image to re-draw (having a separate indicator overlapping the image will create the same behavior). With a 16 bit image, not only does the image have to re-draw on the screen but the 16 bit pixels need to be mapped to 8 bits. When setting the 16 bit display mapping to Full Dynamic, this requires mor computation/pixel than 90% dynamic or one of the other mapping schemes.
This is expected behavior if your program is running and you're trying to display a large 16 bit image. To fix this behavior there are a couple options:
Change the 16 bit display mapping to something other than full dynamic. You can choose which 8 bits to display or if you want to map the bits.
Resize the image just for viewing purposes on your front panel (since you aren't going to view every single pixel of you image on the screen). You can use the IMAQ Resample.vi to do this. This will allow you to take your 1500x1500 pixel image and only display a 500x500 pixel version.
If you are interested in viewing small details of the large image, consider just displaying a smaller region of interest at a time.
Let me know if any of these solutions work for you. Good luck on your application.
Zach C.
Field Engineer
Greater Los Angeles

Images in Table move on Mouse Over

I made a simple table-based photo gallery.
On mouse-over, a coloured bar appears at the bottom of the selected image. At the same time the image moves upwards slightly, presumably the same distance as the width of the coloured bar.
Depending on the position of the image within the table, either one or more rows within the table move at the same time.
I received some feedback from a viewer that they do not like this movement of the table
Can you suggest any way to make the table more stable, i.e. remain still during mouse-over.
See: http://www.eyta.org.uk/photos.html

First, I don't like table-layouts. They're last century's layout approach. Nobody uses table-layouts anymore. We use CSS floats now.
Photo Layout example:
Alt-Web Templates :: CSS Semi-Liquid, Photo Proof Sheet
Secondly, if you're adding a border on hover, you need to add similar same sized border for the non-hover state. Otherwise the jumping is inevitable owing to how the CSS box-model works.
Example CSS:
a {text-decoration:none; border-bottom: 1px solid #FFF}
a:hover {border-bottom: 1px solid #000}
Nancy O.

Image question for mouse over.

I hope this is a simple question. Can I place a 150px wide image on my page and when you mouse over have the same photo pop up that is 300 px wide? I know I can swap the images if they are both 150 px. But I want to see the larger photo with the mouseover can someone explain or show me where to learn how to do this if I can even do it? Maybe it is not mouseover image swap and it is called something else? Thanks in advance.

tl1_mc.visible=tl2_mc.visible=tl3_mc.visible=false;
for(var i:int=1;i<4;i++){
   this["tl"+i+"_mc"].addEventListener(MouseEvent.MOUSE_OVER,overtl);
   this["tl"+i+"_mc"].addEventListener(MouseEvent.MOUSE_OUT,offtl);
function overtl(e:MouseEvent=null):void{
   var n:int=int(e.currentTarget.name.substr(2,1));
   this["tl"+n+"_mc"].visible=true;
function offtl(e:MouseEvent=null):void{
   var n:int=int(e.currentTarget.name.substr(2,1));
   this["tl"+n+"_mc"].visible=false;

Mouse Over Image

Similar Messages

Maybe you are looking for