Mouse Over Toolbar In Forms 4.5 and Registry stuff too

Is it possible to create an MS Office 97 /ie3/ie4 type of mouse
over toolbar in forms 4.5.....
I'm trying (with litlle success) to use images as buttons ...
unfortunately i have a lot of problems
1. each button has 4 states: flat, up, down, disabled... which
leads to 4 bitmaps...... 16 buttons * 4 bitmaps = 64 bitmaps to
be loading depending on what buttons are doing....
2. 1 could be solve by an array of images ( i think.... )
which would be loaded at runtime and swapped into the buttons as
i'd go.....
3. programming all those triggers... to deal with the mouse
states is very labourious and tricky (so what) but also i would
think quite ineffient.......
so if anyone could help me i'd really appreciate it
Also... does forms 5 maybe suppourt mouse over toolbars????
and lastly..... does oracle provide any mechanism for reading
from the windows registry..... to allow username and company
name to be extracted at runtime for use in a splash screen a la
MS word/excel/vis c++ etc
all help would be greatly appreciated....
Thanks
John Lanigan
Core.
null

1. Check the tnsnames entry in forms 4.5 and 10g home
2 open a command/dos prompt
set the ORACLE_HOME (eg set %ORACLE_HOME%=C:\dev10g
set the TNS_ADMIN
3 Run tnsping <Enter your hostname>
4 Also check if you have recently installed any virus scanner /any other appln
5 Also run sqlplus from the command/dos prompt
Rajesh Alex

Similar Messages

Specific region mouse over effect(Button 1 fades out and Button 2 fades in).

Dear All -
I am new to Flash CS5 and building Flash navigation bar with buttons on it.
Below is my problem description that I want to solve with your help.
I have a rectangular bar and placed one small button(Button 1) on this bar. Also, I have similar button(Button 2) with some graphics on it which is of similar size as to previous Button 1.
Button 1 - Without graphic.
Button 2 - With graphic on it.
What I want is that, whenever mouse is taken over Button 1 placed on the rectangular bar, it should fade out and simultaneously Button 2 should fade in. I want only button region to be sensitive to this mouse over effect and not the complete rectangular bar.
Kindly let me know how can I define the specific region(button region only) to be sensitive to mouse over effect in flash, and how to place Button 1 and Button 2 in layers so that both are at the same positition(so that there is no displacement of button detected).
Thank You,
Saurabh Khanna.

Hello -
Thank you for the reply. Button 1 does not have glowing effect, whereas Button 2 has a glowing effect. So what I wanted is that when initially Button 1 is loaded during page load, when I mouse over Button 1, Button 1 would fade out and Button 2 sitting behind Button 1 would automatically look like fade in(due to gradual fad out of Button 1 on top of Button 2).
I could do this now, and would like to Thank you for your reply.
I did this by creating movie clip on "Over" event of Button 1 and changing its Alpha property. But now what I want is how to gradually fade out, means when I remove my mouse from over button, then Button 2 should fade out gradually which will automatically make Button 1 fade in gradually.
I could not find the "Out" event just like we have "Over" event for Button, so I assume this can only be done using ActionScript somehow.
Let me know if I am going correct with my assumption, and possibly if you could help me achieve the remaining half(fading out gradually when mouse is removed from the button).
Thank You once again for your reply.
Thank You,
Saurabh Khanna.

How do you create the 'cream pop-up info text boxes' that appear when you hover mouse over?

Hi people,
I really need to know how you create the 'cream pop-up info text boxes' that appear when you hover your mouse over an object on a webpage (and often in any program e.g. Photoshop) for more than a second. I need to know because the logo on my website is the navigation tool used to return to the homepage. It is always found in the top left so the user can always click it to return.
The only problem is im the only one who knows that when you click my logo, you return to the homepage. I need one of these 'cream info boxes' (forgive my lack of knowledge) to appear so the user will figure it out.
Thanks for taking the time to read my question...

Using your code it should look like this where title attribute is in red:
<div id="apDiv2"><a href="index.html"><img src="divs_dw/jtgd_logo_trans.png" alt="jtgd_logo" title="your description goes here" width="176" height="163" /></a></div>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Mouse-over Text Viewing doesn't work

When I go to my hosting company's webmail site in Internet Explorer, I can run my mouse over an e-mail subject listing and the first few lines of that e-mail will show up without clicking on the link. When I do it using Safari, nothing pops up so I have to click on each message to see any of the text in the e-mail. (Same thing with Firefox, by the way.) Is there anything I can do, or is it the website's fault (and if it's their fault does anyone know what's wrong)? I have tried both enabling and disabling pop-ups in my preferences, to no avail. I'm pretty sure it's not a pop-up thing, because it's not a new window that opens, rather it's like a flash thing appears.
One thing I noticed, when I mouse-over an e-mail subject in IE, everything works fine. But when I mouse-over in Safari, nothing opens AND the status bar shows the following text:
Run script "openmsg('21','Inbox',%20'message')"
I tried searching the forums and knowledge base but couldn't find anything. Thanks in advance!
Mac OS X (10.4.8) Macbook Pro

Hi!
Ok, now I'm a little bit confused
For testing, I deleted all Mouse InputDevices out of my xorg.conf. In ServerLayout I specified the following:
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Dell Notebook Keyboard" "CoreKeyboard"
EndSection
Now it works all perfectly.
On my laptop I have synaptics touchpad and a external usb wheel mouse. Is it deprecated to specifiy all devices (for example mouse devices) in xorg.conf? I'm consfused, because I thought the synaptics touchpad is a special device which needs complicated configuration ;-)
Best regards,
Flasher

Blocks of white appear when I mouse over

I have the latest version of Flash on a 32 and 64 bit version of IE 9 on Windows 7. Whenever I put the mouse over anything Flash, white blocks appear and make it unusable.

This sounds odd. Can you post a dxdiag report so we can take a look at your system specs? What websites does this occur with (specific URL's please)? What version of Flash Player do you have installed? Also, do you notice any difference when you disable hardware acceleration?
How do I disable or enable hardware acceleration?
Thanks,
Chris

Interactive PDF with mouse-overs was created in Illustrator, now pauses and flashes when opened in Acrobat

I have created an interactive PDF using Illustrator that has mouse-overs. When i export the file and then open it in Acrobat there is odd pausing on teh image bewteen mousing over it and the text callout that shold then display. Did I export or save incorrectly?

Thank you for both responses! I'm impressed with the fact that you're reading my post.
I'm new to tech matters with Adobe/PDF/Nitro tho I've been using them for several years.
The original file was created by an agency and given to independent contractor to use. I don't know which program they used to create the form. And I don't know what XFA or LiveCycle Designer means because I'm not technically sophisticated unfortunately.
I used Nitro 6 to populate the data and have a number of forms already filled out, which I periodically open and modify and resubmit. But Nitro 6 is acting sick, despite reinstalling several times. I'm attempting to see if it's worth transitioning to Adobe Acrobat, i.e., can I reopen the forms I've populated and continue to work with them. I like some of the Adobe features for other purposes (e.g., OCR).
Any help in determining how to open the form while keeping the data?

I'm using Firefox on a Windows 7 OS, and I want to know how to disable the small window that appears when I hover my mouse over a tab, bookmark, etc.

Okay, so when I'm using Firefox, say I have multiple window open, I hover my mouse over a window's panel at the bottom of the screen and a small box appears telling me about the webpage on that panel. The same thing occurs when I hover over a tab or a bookmark, it's very annoying and frequently blocks my cursor when I'm trying to work. How can I disable this feature?

I do not use Adobe Reader, but use Foxit Reader in its place, and had the same problem. In Foxit Reader, I right-clicked in the area at the top where you would expect the toolbar to be (it was a blank area immediately above the displayed PDF file), and chose which toolbars to display and that has "stuck" and I still see the Foxit toolbars when I load a PDF file after system shutdown overnight. The only problem is that the area where you would expect the toolbars is still there and blank, but the toolbars that I selected appear immediately below that blank area. See if that works in Adobe Reader for you.

Oracle form 6.0, how to do 3D chart, calender,mouser over changing....

oracle form 6.0, how to do 3D chart, calender,mouser over changing....in we form, like microsoft style.
Or it's better use 9i or 10g jdeveloper? or other tchnology?

The cpu resources are only limited once the cpu's are 100% utilized. It is highly unlikely that dom0 will try to use 100% of a cpu, let alone all cpus. Only when there are no idle physical cpus would you run into issues.
You may want to try reducing the number of vcpus in the windows guest. I have seen reports from users claiming that having more vcpus in a windows guest causes it to run slower.

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

Hi,
You didnt mention which version of IWS. follow these steps.
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
Regards
T.Raghulan
[email protected]

I need help identifying and removing annoying gadget that shows all open windows and applications when I mouse over a corner.

It seemed like a good idea at the time. Some time ago I installed a gadget (doesn't seem to be an item in my Applications folder) which, when I mouse-over the lower-left corner of my screen, brings up a screen showing reduced-size versions of all open application windows and Finder windows. I've tried to identify what it is, and where it is located, so I can remove it, but to no avail.
I'd really appreciate any help getting rid of this thing. Thanks!

Hi Paul,
Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Check the System Preferences>Keyboard>Keyboard Shortcuts.

On my own website vdha.us, I am now getting many words that are purple and when you mouse over them, a new spamming window opens trying to sell something. IE-9 does not do this. How do I turn this off in firefox?

Sirs,
The below URL came up immediately when I tried to access our Newfangled website this morning http://vdha.us :
http://surveyprizecenter.com/survey/claimgift-GT-kw-7b.php?t202kw=Vdha.us&trimmedKeyword=Vdha.us
I prefer to use Firefox and very seldom use IE-9. but now I might be forced to remove Firefox 4.0.1 and resort to using IE-9 because of this situation.
I don’t know how spammers can use our website to exploit their spamming, but I can only imagine the complaints I am going to get from our Board of Directors and members about this.
Can you make them stop, or at least explain how it is that anyone can do this without our permission.
We have never allowed advertisement on our website and don’t plan on starting now.
I am now also getting many words that are purple with two lines under them, and when you mouse over them, a new spamming window opens automatically trying to sell something. How do I turn this off?
I would appreciate any expediency in the return of an answer that you can provide.
Kindest Regards,
Dave Broeker
VDHA Life Member #1797
VDHA Webmaster & BX Manager
http://vdha.us

The "MySearchDial" app needs to be removed in 4 places.
1) Go to "add / remove programs" in your windows control panel select mysearchdial and remove it.
2) Open your Firefox browser then click the Firefox tab at the top left and select options. You will need to change the start page settings back to your preferred start page.
3) Again under the Firefox tab select "add-ons". In the add-ons manager you will need to remove mysearchdial from both "plugins" and "extensions"
4) In your search bar (top right of address bar" use the drop down menu and select "manage search engines". You can restore your preferred search engine and remove mysearchdial from the menu.
This should remove all the components of the nuisance hijacker and restore your browser back to your preferred settings. If you are comfortable with a more in depth removal I would also suggest going to your "programs" folder within the "C" drive of your machine and deleting the "MySearchDial" folder altogether. However, only do this AFTER you have uninstalled it from your system and if you are familiar with this type of removal.

Mouse Over Graphs and Legend

Could this feature be included in next release?
Allow to select separate mouse over values from the legend. If I have long definitions for the bars in a graph - I do not want to display these same bars in the legend (there isn't room) I would rather display numbers in the legend which refer to the bars and then have the longer text shown only when I mouse over the bars.
Right now the legend shows the same text as the Mouse Over Values. If I turn off the legend and only have the Mouse over Bars, then I can't use the Enable Hide/Show Chart Series at run-time feature - so I need to have both - the legend and the mouse over values.
Thank you

Hi Marya,
You can submit an Enhancement Request on the below URL:
https://ideas.sap.com/index.jspa
Thanks,
Amit

Sample script to pop-up txt box on mouse-over on skin toolbar button?

RH9,WebHelp Pro
I am completely new to scripting. I have customised a toolbar button in the skin and while it is easy enough to place a hyperlink to be activated on click, I would also like to display a text caption when the user rolls over the button before clicking.
Can anyone provide or point me to an example of the required syntax?
Thank you.

Hi,
You have to modify the title attribute of the link. The browser will show that text when you hover the link. I believe that WebHelp uses the text of the button as the title.
If that doesn't work for you, you can use the onMouseOver event to show and hide a tooltip. Check out Walter Zorn's tooltip script: http://edwardsmark.com/proofOfConcept/walterZorn/ It has some good examples of how to set up the script.
Greet,
Willam

Imported movie of hard disc not working. Blank square and when mousing over

I have imported about 150 gig of mp4 video into my iMovie event library and no problems until now. The mp4's are stored on my external hard drive (1000gig) and add up to around 105 gig in total. iMovie is also stored on this hard drive. When I import into my event library everything was fine but now I have hit a point where any more mp4's come up in the event library as a blank file, when I mouse over them a still shot comes up of another pre-imported video that has nothing to do with that video and the file plays sound but there is no footage. I still have 50 gig of footage to import before I can start editing my movie.
I still have 750 gig free space on my external drive and I am using a Macbook with 4 gig of memory and 48 gig of 119 still available on my Mac hard drive, is this the problem? Does anyone have any solutions ?

Thanks again Tom, I worked out your clue, being "whoa" as to meaning I shouldn't have moved iMovie onto my hard drive, I have moved it back to my Mac and everything seems to be working fine now, fingers crossed. I am really getting good at importing now, but don't think you'll be rid of me just yet as I have a lot of editing to start in the near future!

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages: "Extensions may not function properly because it does not meet the dependency conditio

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
Nina

Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

Mouse Over Toolbar In Forms 4.5 and Registry stuff too

Similar Messages

Maybe you are looking for