Mouse pointer does not stick on fader when moving it

Using Logic Pro 9. If I grab any fader, the mouse pointer turns into a small dot. If I then drag the fader up or down, the dot does not stick on the fader. Instead, I find I have to drag the dot well above or below the fader to make big adjustments. Is there any setting to control this? Or is this just how it is in Logic. In all other audio applications I've seen, the mouse pointer sticks on the fader when moving it up or down.

No - haven't found a fix for this yet. I can only guess that maybe it wasn't as noticeable when display screens weren't so big. I'm running on a 27" iMac so the effect is quite pronounced. I supposed it could be argued that it gives you a finer grain of control to make small changes - but it really takes away from the 'feel' like you are moving a real fader.

Similar Messages

  • Mouse pointer does not move between monitors

    my mouse pointer does not move between displays all of a sudden !

    ok, I am using magic mouse, mac mini with two displays,
    was working fine, but now when I started the computer recently it does not want to move the mouse to the other screen.
    the other screen is open but it is not possible to move anything over to it !!
    tried to restart reset the display settings etc. but no luck !!

  • The mouse pointer does not appear when starting my TM2-2190sa

    On startup the usual screen display appears giving Mail, Web and Music options but there are no icons at the foot of the screen and no mouse pointer to move to click on anything. It is configured to boot Windows 7 after waiting 15s but this is no longer happening.
    Any ideas ?

    Hi there
    When you look at Edit > Preferences > Recording > Full Motion Recording do you have the mouse enabled there?
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • Mouse pointer does not go away during videos.

    I have the macbook pro 13 inch with retina display and I have never been able to get the mouse pointer to go away. It stays on the screen for youtube videos, itunes visualizer, and other online videos. Is there a setting I need to enable? I know my friend's mouse pointer disappears on the itunes visualizer and youtube videos. Anyone have any ideas?

    Have you tried moving the mouse cursor to the right bottom corner of the screen?  Any of the 4 corners? 

  • Mouse pointer does not function in System Preferences

    I have recently switched my mouse from right to left use (due to injury in the right arm). After changing the mouse does everything as expected but only in the System Preference application I cannot use the pointer of the mouse to select (the menu system does work). How can I get the functioning mouse back?

    Reset the SMC.
    Barry

  • ICal does not update the organizer when moving items between calendars

    I have two calendars: Exchange 2007 and CalDAV.
    If I organize a meeting in my Exchange calendar, and later on notice that it is in the wrong calendar, move it to my CalDAV calendar, iCal forgets to update the organizer correctly.
    The organizer after moving is "invalid:nomail". The consequence of this is that I can no longer edit that item as I'm "not the organizer". Moving the item back to my Exchange calendar is impossible for the very same reason.
    All I can do after moving is delete and start over. Anyone experiencing the same problem?

    Also, you can't move the event to a different calendar if you're not the organizer.

  • My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer.  This happened after I agreed to a failed software update.

    My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either.  This happened after I agreed to a software update which failed.  How can I get it going again?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • When I rearrange the order of my photos in an album, the order does not stick for exporting for a book.

    I manally rearrange my photos in an album, the order does not stick when I export to a folder in order to make a book.  Also, if I have given a title to a photo, it does not seem to export with the other pictures in an album.

    It's a little vague on what you're workflow is.  So I'll make a guess about the book: if you're dragging those photos into an iPhoto book they will be sorted by date.  So you would have to use the Photos ➙ Batch Change ➙ Date (with 1 minute between photos) menu option on those photos in the album before dragging them onto the book icon.
    Photos exported to a folder on the hard drive will be sorted by the Finder either alphanumerically or chronologically.  To get them in the manual order that's in the album you'll need to rename them via the Photos ➙ Batch Change ➙ Title to Text with a sequential number added to each photo.  Then export to the Desktop with the option to use the Title as the new File name.
    OT

  • Can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?

    can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?

    Hello mate!
    Are you sure u have the option on the up-right side of the arrange window checked to x-fade?

  • Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

    My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
    I have had this working previously but at the minute it seems to not be playing ball....any thoughts
    Thanks
    Dan

    BUMP
    Any ideas?

  • Pointer does not move to the default button in the dialog box

    example: when cleaning out trash the pointer does not go to the default button in the dialog box, you have to manually go there.
    This happens all the time.

    Hi Abhishek,
    In SAP this job shows completed till the 3rd step. and no error in the job log. but it does not execute the 4th and the 5th steps. And in Redwood, it shows completed for 1st and 2nd steps, 3rd step is in Error but has no error log. The 4th and 5th steps are in chained status. I have not amended the job chain after import. I have just scheduled it as it was running in the SAP system.
    Let me know if you need some further information on this.
    Regards
    madhu

  • My mouse can not click to anything left, right or the middle mouse button does not work

    I am using a 24 inch imac and the problem is suddenly my mouse can not click to anything left, right or the middle mouse button does not work i can see cursor moving and i can use the features of the keyboard but my mouse dies. I tried to plug in another mouse magic trackpad and my tablet but each has the same problem. I can not click to anything but cursor is moving and computer is not frozen. I have to shut it off from the power button when this happens. Do you have any idea what can cause this and how can i fix this?

    Reset the SMC 2-3 times. Click Intel iMac SMC and PRAM resets for instructions.

  • There are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responing, close fire fox, or shut down computer. There are other times that it starts up normaly wit no probs

    # Question
    there are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responding, close fire fox, or shut down computer. There are other times that it starts up normally wit no probs
    ..

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • Centre Cursor/Trackball does not open any folder when pressed

    I have a Blackberry Curve. I think it's a 8520 but can't find out the actual model number as the centre cursor/trackball will not let me enter any folder when pressed.  It will navigate but does not work or "enter" when pressed to open a file e.g. Cannot open text messages, Cannot mange connections, Cannot access Setup etc. etc. etc  Tried re-booting several times.  Phone goes through the usual set-up and verification as OK.  Screen sticks on "confirm current date & time" as the centre cursor will not allow me to OK or edit.

    The device has a physical keyboard? If so, you can navigate to the menu item with the trackpad and then hit the "enter" key on the bottom right of the keyboard. It looks like an arrow going down and to the left.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Boris Title - Changes does not stick

    I'm making some changes on my Boris 3D text but the changes does not stick.
    I do a bevel on the text and press Apply, but when I see the result nothing happened. I go back in and it looks like I changed nothing. I click the check box but it does not help...

    Changes do not stick.
    Yrs. for proper English,
    Uncle Grump
    Thanks for correcting my English Uncle Grump
    I think the reason for my problem was that the text was not selected when I did the changes.

Maybe you are looking for

  • Free-of-charge subsequent delivery

    Hi experts, "If the customer is to receive replacement goods, do not create a credit memo. You can enter a reason for rejection for the appropriate items in the return. You then create a free of charge subsequent delivery with reference to the return

  • JBoss EAR wont deploy on some machines

    Hi, I am having problems deploying an EAR firl on my production machine. The EAR works fine on my development machine but will not deply the EJB on the live machine. I have checked the configs and installed versions of JBoss, JDK and servers but can

  • How can I assign a function to the on/off button on my imac?

    The on/off button on my imac used to turn the computer off. After a re-install, now the button just turns the computer to sleep mode. I don't remember how I had reassigned the function to the on/off-button on my imac. Any solutions? Thank you very mu

  • Roommate with a mac and don't wanna share

    my roommate in the dorms that annoys me just got a mac and I have an AX and i want to know how i can make sure they can't access it because i have a few devices on the AX and they just annoy me!!!!

  • Explain plan for Query performance

    Hi Gurus, I need to improve the performance of a procedure. The procedure has the below QUery. I dont have Idea on how to imrpove the perf by seeing the explain plan. Can anyone please help me to explain where I need to change the code. The below are