Mouse pointer drops clips while dragging from canvas to timeline

Hi, I hope some of you guys had the same and know how to solve it.
I'm have a problem with my mouse pointer dropping the clips in the timeline before I release the right button on my mouse.
I select a clip that I want to drag from canvas to timeline, I right click and drag it to timeline and FC only give me like 2 seconds to line up the clip on the timeline and then FC drops the clip into the timeline by itself. I don't even release the right button on my mouse. It seems like this is some kind of setting in FC.
The same thing happens when I try to drag the clips around the timeline, the pointer grabs the clip, but I can move the mouse all over the timeline and nothing happens.
And the last but also very frustrating part is when I try to scroll with the play head in the canvas, the mouse pointer grabs the playhead and holds it only for 2 seconds, then it drops it and I have to go and look for the playhead again and drag again.
An help and advice is appreciated.
Thanks

Sure, I think you're are right.
I will lean them with time, it was just frustrating when all of a sudden nothing works. My compressor went nuts at the same time.
When I try to submit the compressor would say that "can't submit batch unable to connect to background process"
So, I didn't finish anything I was doing today. I went to exported using QT but the clip came out to me somewhat very shaky, in the moments when camera is zooming in it shows on the screen as it I'm zooming for 2 second and then stopping and then zooming again, it's not a smooth footage. Kind of making me think that my grafics card isn't good enough. I got to research this issue now. Oh.

Similar Messages

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Points to consider while migrating from MOSS to SP2013

we r migrating from SP 2007 to SP 2013. my job is to find is there any customization in the site which is to be migrated.
we have some sites and hundreds of subsites. i m currently checking the pages. it doesnt have that much customization. most of the pages have images in content editor webparts and image webparts . some images are uploaded from picture library some are in
the _layout folders.'
my question is if we migrate them what things need to be considered,what modifications need to be done in SP2013 while migrating. will the images be a problem which i dont think is a big concern . and as i said there is not much customization just some random
images in webparts

How are you planning to do the migration ? Are you going to make use of any third party tools ?
Have a look at the following links for pointers.
https://social.msdn.microsoft.com/Forums/office/en-US/069d2d56-8346-4d42-ab30-86c45acf3941/migration-moss-2007-to-sp2013-with-third-party-tools?forum=sharepointadmin
http://www.avepoint.com/community/team-blog/exploring-your-microsoft-sharepoint-environment-before-migration-with-the-discovery-tool/
http://nikpatel.net/2011/01/07/moss-2007-to-sharepoint-2010-upgrade-assessment-questionnaires/
http://sharepointpromag.com/blog/migrating-sharepoint-2007-sharepoint-2013-part-1
https://technet.microsoft.com/en-us/library/ee947141.aspx
Geetanjali Arora | My blogs |

Airport express dropping internet while streaming from computer

In the last week or so, everytime I try to stream video from my PC to my apple TV (2nd gen), my airport express (only router in my house) drops the internet connection. I thought at first it was my ISP, it then noticed it happened only when I was streaming movies from my PC ( have tried it with two different computers and same result). As soon as I stop streaming my internet kicks back in. I've restarted and reset both my Apple TV and airport express back to factory settings and still get the same result. In addition, the same problem occurs when i try to stream videos from my PC to my iPads or iPhone via the shared library. Curious if anyone has encountered this problem before and if it is a firmware problem and not a hardware problem.
SIdenote: Airplay in general has been unstable as well so I'm assuming the two problems are linked.

And your reminder of the channels got it fixed. Being out in the country my internet is provided wirelessly (WISP) and I remembered after your comment that the tech who installed our receiver dish said that the internet is being broadcast on the 2.5 ghz band on channel 7 and if any issues arise change the channel to a lower number. Never had an issue till now and updated the channel to 1 and back in business. A big thanks.

The mouse pointer seems to change randomly from the usual pointer to the I-beam pointer, finger pointer, column resize pointer, arrow up pointer, etc. without any reference to function.

I actually don't care other than the fact that it isn't the way it should operate and everything else seems to behave. However, the I-beam pointer is hard to see and can disappear. It seems to happen mostly in Safari and then carry over to other applications. Anyone else see this happen?

The program you gave me was great, so simple, yet so effective....yet I still have a problem. The problem is that my interface has a giant TAB inside with lots controls. So I need it to be an arrow when it is in the tab but not on the other controls. I tried manipulating you program and used an if condition inside the event case that if the control reference of the event case is the same as the control reference of the tab then remain an arrow. That works for other controls outside the tab and and the tab itself but it doesn't work with controls inside the tab...... I have attached your vi, just changed a little to see what i am saying. I am pretty sure there must be a way around it so i am trying it out now, but if you know something already that might help, that'll be great
Reza Sed
Attachments:
Default Cursor_modified.vi ‏38 KB

HT1338 My mouse pointer just started going crazy from the track pad

It's making all kinds of movements and actions on its own. Bluetooth is disabled so it not another device. any ideas?

Turned out to be the battery. I never would have guessed that one!
When I first started hearing reports of "exploding" batteries, I didn't believe it either. But I've since learned that, though not common, it's also not amazingly rare.

.mov files won't drag from library to timeline

Hi, I am new to Final Cut Pro X, so this might be a simple fix, but I when try dragging the file from the library to the timeline, it doesn't drop. Any help would be appreciated.

Not sure what you mean by dragging it "from the library." You mean from some directory within Finder?
That's not how FCPX works.
First, create an EVENT in FCPX. Then you can drag a clip from any EVENT into the timeline (project).

Bug: scrolling with mouse scroll wheel while dragging tracks no longer works

After upgrading to Spotify for Mac 1.0.2.6, I can no longer use my mouse's scroll wheel while dragging tracks to a different position in a playlist. This is an important feature when working with long playlists. Steps to reproduce:Create a playlist that extends past the bottom of the windowClick and begin dragging the first song on the playlist downwardUse your mouse's scroll wheel to scroll the playlist down. It will not scroll.

Hey ,
Thanks for letting us know.
We don't have any update on this yet and we'll pass the information on to the right team.
We'll keep you posted.
Thanks!

Focus on mouse pointer on click- WPF

hi,
I want to focus the position of the mouse pointer when the user clicks.
Exactly like the focus we get on clicking the ctrl key to locate mouse pointer after enabling it here.
Can anyone help me with this.
Thanks,
Shaleen
TheHexLord

Hi TheShaleen,
>>I want to focus the position of the mouse pointer when the user clicks
It's hard to accomplish your requirement, I've tried to find API to enable this setting, but as far as I know, there is no official API to enable this programmatically.
If you just want to make this work on some control, like Canvas, you could get the coordinate of Mouse Pointer and draw shap on this Canvas, please refer to this article:
http://msdn.microsoft.com/en-us/library/ms747393(v=vs.110).aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Mouse pointer effects, raining stars

Hey!
Sorry for my English, its not the best...
Am making a webpage for my school-theater and the story is Peter Pan! The hole site is in Flash, and I've never done this before so its alot of pressure. One detail I really want to make perfect is changing the mouse pointer into the character Tinkerbell from the movie. The little yellow girl, with stars (or glowing dust) falling off. I want the same effect on my pointer, so it rains tiny stars down. And when you move it around you can see the trail of the mouse because of the stars. Its supposed to look like she is flying around!
I know its kinds stupid and I dont got much experience in either webpages or Flash, but thought it might be cool. Is it really hard to program? Using CS4 with AC3. Thanks for the help in advance!

no, it's not hard.
you create a movieclip of tinkerbell and a movieclip of a few pixie-dust stars that fade in, fall, fade out and are removed. make the pixie-dust stars a movieclip that plays from start to finish quickly.
then use Mouse.hide() and create a loop so the tinkerbell movieclip's x,y is the same as your mouseX,mouseY. also create a mousemove listener and listener function that adds your star movieclip to the stage at mouseX,mouseY each time the mousemove listener function is called.

Lost Canvas and Timeline windows and can't get them back

I'm new to Apple after many years with Windows. So I'm feeling my way around a bit.
Anyway, I just started using my new FCE, imported my first 60 minutes of home videos, and was getting ready to edit them when I lost 2 of the 4 editing windows - Canvas and Timeline. So I went to the Window command drop down and noticed both Canvas and Timeline were "greyed out". Browser and Viewer were not greyed out and both are working properly.
Any help would be greatly appreciated.
This is most frustrating. (I thought only Windows applications had frustrations!)
IMac6 Mac OS X (10.4.9) 24 inch

Hello...
As Da Nam suggested... double-click on the sequence icon in the browser to open it... this will open the timeline and canvas windows.
If it's another problem.. try pressing control+U to restore to default window lay-out.
J

Dropping audio when dragging clip from Source Panel to Timeline

I have having issues with audio being dropped when dragged from the Source Panel to the Timeline. Audio is present in the Source Panel and plays great along with video, but when I drag the selected clip to the Timeline it drops the audio.

Can't transfer video from source monitor to timeline
This is an answer to a previous topic about video but the same answer also applies to audio

Gray thumbnails and can't drag and drop clips

I've been using iMovie 11 for a while now, and have accumulated more footage than my Mac HD can hold, so I migrated all my iMovie Events to an external HD. Everything still worked fine for several days after I moved the videos, but then a few days later, when I launched iMovie, all the clip thumbnails (Events and Projects) appear gray, a thumbnail only appearing wherever I leave the mouse, and I cannot drag and drop clips, neither from Events to Project, nor within a Project.
I've searched the web for answers and found things like deleting the cache and thumbnails so that iMovie regenerates them, or deleting the playlist file in the library, but none of these solutions worked.
I am in the middle of a big project so I would appreciate a solution that doesn't involve erasing all my stuff and starting again....

The external drive I'm using is a 2TB RAID connected by firewire and it is almost constantly in use, I am always able to access all sorts of files on it, including the videos, so I doubt that would be the problem. Nevertheless, I did as you suggest, but as expected, it made no difference.
In the meantime, I have also created a new iMovie Event and have started re-importing all the videos as a backup solution, but that will take a few days. The new event that I have created so far works normally though, the thumbnails appear and I can drag and drop clips. While I am at it, I will import these videos in to several Events rather than have all that footage in one Event, so if something goes wrong it won't be as problematic and it might even allow the identification of a clip which might be the cause of all this.
So right now I simultaneously have one Event (the new one I just created) which works perfectly, and the older Event which still doesn't work properly. So as a last resort I can probably also create a new Project and try and duplicate as much as possible from the one I am currently working on and hopefully that should work. However, if there is a quicker, less tedious solution, I'll gladly take it.

Mouse problem with FCP: drops clips or do not respond to clicks.

hi to all.
since i bought my macpro i've been noticing a very annoying problem when using FCP. there's a moment when the mouse stops to work properly and begins to drop clips when i try to move it or do not respond to clicks. two examples: 1- i want to move a clip from the end of the timeline to its beggining. in the middle of the way, it just drops the clip, as if i stoped pressing the mouse button. 2- i choose the pen tool so i can play with opacity and create fades. in the middle of the process of adjusting, it stops to work. i have to keep pressing several times to complete the action.
the problem is basically with the CLICK function. the cursor responds to the mouse properly, but when you click something to move it, it doesn't recognizes when you stop it and drops things. it happens only with fcp.
i'm using fcp 6.0.1, though the problem happened when i was using fcp 5.

I have a similar problem with my mouse in FCP. Perhaps not the same thing, but I think I figured out it's due to the design of the mouse. It's an Apple A1152, a white one-button mouse with a little scroll wheel. The thing is the whole top presses down for the click, and if I don't grab the two little tabs on the side that give you the leverage to keep on pressing the top, across larger distances I lose the pressure necessary and I drop whatever it is I was dragging. It's a pain because my hand is not the right size or shape to naturally get a hole of those little tabs. I don't know if your problem is related in any way but I thought I'd mention it just in case...,

Lags while dragging clips in timeline?

I just started using premeire cs6 recently. Making the switch from Final Cut.
I noticed that when I grab a clip in the timeline and drag it to a new location, it has a lag. The clip is choppy and always dragging about a half a second behind my mouse pointer which moves in real time. In final cut, I never experienced any lag whatsoever which dragging clips around the timeline. Is this normal in Premiere? If not, any ideas on how to fix this?
I'm running an 8-core Mac Pro that doesn't typically run into performance issues... especially over something seemingly simple such as this.
Please help. Thanks.

I'm having the same problem but on windows. When I drag clips from the media browser that are located on my raid or p2 cards it takes a longer then what it seems it should be for them to appear on the timeline. The mouse curser doesn't change for me so it just looks like you didn't grab the clips but a few seconds after they lag then poof show up.

Mouse pointer drops clips while dragging from canvas to timeline

Similar Messages

Maybe you are looking for