Mouse pointer is not working correctly

I have a MacBook Pro and the pointer is not working correctly. It does not work smoothly and it is hard to get it to go where I need it to go.

Hello billm46,
Welcome to the Apple Support Communities!
It sounds like the trackpad on your MacBook Pro is displaying jumpy behavior. In this situation, I would recommend reading over and working through the suggested steps in the attached article.
Trackpad or Magic Trackpad is jumpy or erratic - Apple Support
Have a great day,
Joe

Similar Messages

Mouse scroll wheel not working correctly.

Just installed Firefox 4 and my mouse scroll wheel is not working correctly. When opening the program, I can scroll as normal for about 5/10 minutes. Then, suddenly, the mouse scroll wheel no longer works. I've since found that it is actually scrolling outside of Firefox. E.g. I had Outlook open and it was scrolling through my Outlook even though Firefox was the open window. I checked this multiple times and it always seems to be the case.
Checked about:config as advised, everything looks correct on the mousewheel settings (i.e everything is set to default). Mouse drivers are up to date. No problems with any other programs. This issue started occurring in Firefox 4 beta. I switched back to 3.6 so I could continue scrolling. Updating to Firefox 4 caused the issue to recur.

It seems a lot of people are having problems with the Mighty Mouse's scroll ball. I actually thought I was done for after just a few weeks of using my first (wired) one. But here I am years later with my wireless variant, beeing perfectly happy with it (in case you don't know, the wireless Mighty Mouse is a much better option due to it's laser based tracking system). In my experience, getting rid of fluff that interferes with the ball is quite easy on both types. Try blowing really hard directly at the trackball (optionally while you press it down with some pointed device) a few times. Rotate it and repeat as needed. Alternatively roll the mouse upside down on the microfiber cloth that probably came with your Mac.

Three Point Edit not working correctly :(

Hi there,
first of all I'd like to say thank you Adobe for listening to your users. And I hope this one gets noticed right away....:
It appears that 3 point editing ist not working correctly.
Right now I'm editing a video and I heavily rely on 3 point editing.
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Coming from tape workflows I really don't like clicking clip after clip...I need to edit
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
As soon as I want to use my source sequence with its individual tracks and hit (.) or (,) just nothing happens. Hmpf!
Come on guys, that is essential editing stuff, not fancy speech detection blabla...sorry but this is mega-annoying right now....
It says "Pro" right after "Premiere". So please make it pro! Professionals need ROCK SOLID essential functions.
Make us editors happy having switched from Avid/FCP etc.
Make essential stuff rock solid. That's what makes an app "pro".
Cheers and please mind my harsh words. Just a little upset right now. (I know that's not pro either )

bmfm_ wrote:
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
Hi bmfm,
I think I know what's going on. The behavior you describe happens when you try to edit back into your original sequence. Can try making a new sequence to cut your selects into? See the page in help for details: http://helpx.adobe.com/premiere-pro/using/edit-sequences-loaded-source-monitor.html
Thanks,
Kevin

Missing Mouse Pointer (F5 not working)

This thread has been moved to another message board. Click the link to jump to its new location.

Hello billm46,
Welcome to the Apple Support Communities!
It sounds like the trackpad on your MacBook Pro is displaying jumpy behavior. In this situation, I would recommend reading over and working through the suggested steps in the attached article.
Trackpad or Magic Trackpad is jumpy or erratic - Apple Support
Have a great day,
Joe

Some time tech pad not working correctly

I am buy a HP Pavilion laptop from awok.com. Some time mouse teach pad not working correctly some time open windows 8.1 time bar and some time i am using mouse teach pad then automaticly come right click popup menu coming some time i am try to scrol the page using mouse pad then automaticly Select all from the page so please help me

Hello @BABUMON ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad or ClickPad pointing sensitivities it should help resolve the issue.
I would be happy to assist if needed as there are many models of HP Notebooks, I would need the model number.
How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Share point in server admin not working correctly... I think

I suspect that the share point in server admin is not working correctly. In workgroup manager when I click on a user and then click on the "home" tab, under the full path field I see a file path of:
afp://server.mydomain.com/Users
However if I go to Server Admin -> AFP -> Share Points then click on the Users share and then click on the share point tab below, enable auto mount is disabled. How can this be possible? I thought for a directory to show up in home in workgroup manager it had to be set as an auto mount. Has something possibly corrupted? And what?

Here's a bit more information about our setup and our experiences with Apple's CUPS implementation:
On the server, all printer queues are set up with only lpr and ipp sharing enabled with the PPD setting for each printer set to Generic Postscript. We found that setting the PPD to the printer specific one on the server caused problems when clients tried to use printer specific options, like paper tray selection, etc.. The selection would be undone, apparently because the driver on the server would override the previous settings. Using Generic Postscript allows the client PPD settings to go through unmodified. Our printers are general a mix of HP LaserJets and some Sharp Copiers.
All clients use lpd to the server queues with the printers' actual PPDs configured. Using ipp is superior in that printer feedback (jams, out of toner, etc) makes it back to the clients, but ipp only works when the client, the server, and the printer are on the same network. If the ipp client is not on the same network, the client spooler immediately goes into a paused state and the print job is stuck on the client.
Using lpd to the server queues works reliably, but there is no feedback to the client. Jobs disappear from the client queue and go to the server, appearing to the user as a successful print. If the printer is down, there's nothing they can see or do about it.

My mouse is not working correctly after upgrade to ITunes 11

I upgraded to iTunes 11 for WinXP and now my mouse is not working correctly. No double clicks, no right button function and sometimes refuses to do simple left click options. What can I do?
I've tried new mouse drivers and checking the settings in Control Panel but no joy so far.
Driving me mad and taking me three times longer to do anything as I look for keyboard solutions.

I'm facing the same problem too on Windows 8. No mouse clicks (just 'ding' sound whenever trying to click anything).
I could work around it on Windows 8, but ultimately have to restart my PC to get back mouse functionality.
I wasn't quite sure which app is to blame, but ultimately concluded it's iTunes 11. As this behaviour always concided with having iTunes running in the background for 15-20 minutes (usually listening to podcasts) and never seems to happen when iTunes 11 isn't running.
Don't know what to make of this, I'm currently playing my podcasts through Windows Media Player instead. I'll hopefully try running iTunes 11 in Windows 7 Compatibiliy mode to see if that helps.

HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. Any clues?

I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. I only have a previous version re-install disc as I bought the latest OSX off the app store. Any help gratefully received?

Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Magic Mouse not working correctly??

I just installed the new Mountain Lion OS and now my Magic Mouse does not work correctly. First after I log in, I have to turn the mouse off and on then then it will move. When I goto the options menu for the mouse none of the addtional features are there for the mouse including the scrolling. Any suggestions?

Hi Hunters Dad. I also had this problem and it turned out to be the bluetooth connection. After I upgraded, the bluetooth connection dropped off system preferences.
To locate your bluetooth connections click on the Apple logo in top left hand corner of screen, select System Preferences and look under Internet & Wireless. You should see Bluetooth there. If you don't, then power cycle your computer (see below). Afterwards go back to the System Preferences and Bluetooth should be there.
To Power Cycle my computer Apple support had me shut down my computer, take out the power cable and all other connections for one minute then plug back in and restart as follows:
press your computer ON button and then hold down the p r command option keys at the same time until the 2nd chime. I also have been having long boot ups since upgrading and the chimes didn't come on. Applecare instructed me to stop holding the keys and the computer eventually booted up. Lo and behold the bluetooth connections were visible and my magic mouse and trackpad now work fine.
Hope this works for you.

MOUSE Events on FX 2.0 not working correctly

Hi,
I am trying to capture mouse right click in my Java FX application to show the ContextMenu but couldn't do so.
There are methods available in the API i.e. isSecondaryButtonDown() and isPrimaryButtonDown on MouseEvents to capture mouse clicks but not working.
Both of the above mention methods return false irrespective of right or left click.
I will be glad to see resolution for it.
Thanks in Advance.
Ashish

I have no idea what the context of the code you are writing is, but capturing of MouseEvents works fine for me.
Perhaps you are trying to test mouseEvent.isSecondaryButtonDown() in a MOUSE_CLICKED event handler which will correctly return false after a right mouse click because the click event can't be generated until the button is released (i.e. no longer down).
import javafx.application.Application;
import javafx.event.*;
import javafx.scene.Scene;
import javafx.scene.control.*;
import javafx.scene.input.*;
import javafx.scene.layout.StackPane;
import javafx.scene.paint.Color;
import javafx.scene.shape.Rectangle;
import javafx.stage.Stage;
public class MouseEventTest extends Application {
public static void main(String[] args) throws Exception { launch(args); }
public void start(final Stage stage) throws Exception {
    // provide some instructions.
    final Label instructions = new Label("Right click anywhere to choose a fruit");
    instructions.setStyle("-fx-font-size: 20;");
    instructions.setMouseTransparent(true);
    // ready a context menu.
    final ContextMenu fruitChoices = new ContextMenu();
    fruitChoices.getItems().addAll(new MenuItem("Apples"), new MenuItem("Oranges"), new MenuItem("Pears"));
    for (final MenuItem menuItem : fruitChoices.getItems()) {
      menuItem.setOnAction(new EventHandler<ActionEvent>() {
        @Override public void handle(ActionEvent actionEvent) {
          instructions.setText("Enjoy your " + menuItem.getText());
          System.out.println("You like " + menuItem.getText());
    // display the context menu whenever a user clicks inside a node.
    final Rectangle node = new Rectangle(400, 300, Color.LIGHTBLUE);
    node.addEventHandler(MouseEvent.MOUSE_CLICKED, new EventHandler<MouseEvent>() {
      @Override public void handle(MouseEvent mouseEvent) {
        System.out.println(mouseEvent);
        System.out.println("Secondary button down: " + mouseEvent.isSecondaryButtonDown());
        if (MouseButton.SECONDARY.equals(mouseEvent.getButton())) {
          System.out.println("Choosing fruit");
          fruitChoices.show(instructions, mouseEvent.getScreenX(), mouseEvent.getScreenY());
    // show the scene.
    final StackPane layout = new StackPane();
    layout.getChildren().addAll(node, instructions);
    Scene scene = new Scene(layout);
    stage.setScene(scene);
    stage.show();
}

Re: Satellite L750 - advanced mouse settings are not working properly

Satellite L750 model (One month old). The problem is that every time I start the computer, only works the point device of the mouse synaptics , but retains the advanced settings as pressing with three fingers, turns or you can use the wheel to move up and down the page. The funny thing is that is activated by clicking the mouse icon in the Control Panel. Once I access the icon, the mouse works perfectly and appears in the toolbar.
In Device Management, tells me that works perfectly and that the driver is updated.
Does anyone think of any solution? thanks

Hi
To be honest, I dont really understand what you are talking about.
Do you have problems with the USB mouse or the touchpad?
What device does not work correctly: mouse or touchpad?
The L750 series supports an touchpad with additional feature called Gesture (Multi Touch).
Here you can find nice description on Synaptics page how it works.
http://www.synaptics.com/solutions/technology/touchpad
Furthermore the settings could be found in control panel -> mouse -> Advanced tab
FYI: You can disable and enable the touchpad function pressing the small button above the touchpad surface (On/OFF).

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Property inspector not working correctly

The property inspector in CS3 is not working correctly. When
I select text or any other object the property inspector does not
change for that object. But when I right mouse click on the
selected object it does. Do I need to change a setting?
Thanks!

Yes, me too. I can't find an answer to this anywhere.
If I right-click or double-click on an item the property
inspector shows it, but if I single click, nothing happens. It's
bad for productivity.

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

Mouse pointer is not working correctly

Similar Messages

Maybe you are looking for