Mouse settings for Revit on Windows 7 Side of iMac

I have a pretty specific question that's really stumping me. I work on a PC at my job and work in AutoCAD and Revit. At home I have an iMac. I recently partitioned it with Bootcamp and installed Windows 7 and Revit 2012. I also bought and installed a wired Microsoft wheel mouse as it's needed to zoom, pan and orbit the views in Revit. I can't get the settings right on the mouse in order for the wheel button to pan and orbit. It will zoom in and out, but not pan and orbit? Any help anyone has would be most appreciated!

Is your system protected by a firmware password? Or do you have FileVault enabled? Or did you install Boot Camp on a Fusion drive?
Have you tried booting from the Recovery HD:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.

Similar Messages

Command to set modify Advanced Security Settings (Audit Settings for folders) on windows 2008

Hello,
We have requirement to modify Advanced Security Settings (Audit Settings for folders) on windows 2008. I am looking for a command which does this job.
I know, using group policies I can do this; in fact I had done this using group policies. However, I need to do this on number of servers which are not in domain. There are around 15 folders on which I need to enable Auditing; manual editing folder advanced
permissions is a cumbersome job. Hence, I am looking for a command line options.
I need to know how command can be utilised to enable Audit option on a folder. Please share a command which can do this; once I get the command, I will create a batch file for other necessary folders. (BTW, this is not a scripting question, I just need to
know the command hence, please do not re-direct me to scripting forum)
Manually through GUI, I am setting following.. snaps are given below
Thanks !

You can try using Auditpol.exe: http://technet.microsoft.com/en-us/library/cc731451%28v=ws.10%29.aspx
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer
Thanks but I guess, auditpol ca be used only to manipulate system audit policies. how do I specify a folder and user in auditpol ? I could not find or understand how folder can be included with auditpol command line options.
Thanks !

Recently installed windows 8 via bootcamp and mouse is freezing up on windows side, recently installed windows 8 via bootcamp and mouse is freezing up on windows side

I recently installed windows 8 via bootcamp and mouse pad is freezing up on the windows side. Are there any fixes out there for it.

If it is really not possible, I get it. But there are plenty of people that are running Windows 8 on the same model, that is powerfull enough to run Win 8. I'm actually running it, but until shut down or restart . Can't I edit Info.plst file alternative for Windows 8 like I did to allow BootCamp to image burn my USB on my model? I mean my model is same as the next one. I can't see why the drivers for mid 2010, won''t work on mine...

Mouse Settings For Dual Displays

Hi Gang
Just started using Dual Displays for Final Cut. Was wondering if anyone had some tips for maximizing mouse settings? Its taking some time aquiring control of the mouse.
Should I go to Preferences for adjustments?
Screen Shots:
http://www.locationstudio.net/Left.jpg
http://www.locationstudio.net/Right.jpg
Thank you
Mike

Solved
Thank you

Loss of internet connection from windows side of imac duo core

I have cable modem as internet hookup. When I am in Mac I have no problems, but every time I either change to the Windows side, or the computer is turned off or goes off, when Windows comes up, I can't access the internet.
I have gone into control panel and it states that the cable modem is unplugged or not connected. I then have to literally unplug the cable from the computer, wait a few seconds and then plug it back in.
This has been going on several months and started after I had a cable issue at the house and the cable guys came out and fixed it. they changed some things on my computer.
I think something on the MAC side was actually changed and that is impacting the windows side.
Prior to that I could access the internet from either side w/no problem.
Now, even if I unplug the cable and then plug it in, the computer is not recognizing that the cable is plugged in. As you can see, I am still having NO problem w/the MAC side.
Any ideas what command or default setting might have been changed to impact the Windows side in this fashion. thanks

what is the firmware version on the router?? try reducing MTU to 1452...let me know if you have any issues will get back to you.
thanks

LAN side firewall settings for Direct Access (Windows Server 2012 R2) in DMZ?

I am currently planning to set up our first Direct Access server (Windows Server 2012 R2). I will be in our firewall DMZ and we will be using the IP-HTTPS listener.
For the Internet facing rule only TCP 443 inbound/outbound is sufficient but for the LAN facing rules (not talking about the Windows server firewall) what would be the recommended firewall rules for a Direct Access server? Is there a best practice guideline
to follow for this? Appreciate any advice or comments. Thank you.

Hi Barkley
Please see this Technet Link which will backup your requirements - https://technet.microsoft.com/en-gb/library/jj574101.aspx
Section Reads -
When using additional firewalls, apply the following internal network firewall exceptions for Remote Access traffic:
ISATAP—Protocol 41 inbound and outbound
TCP/UDP for all IPv4/IPv6 traffic
Also another link from http://www.ironnetworks.com/blog/directaccess-network-deployment-scenarios#.VO3tfvmsVrU
"I have had a number of conversations with security administrators and network architects who have expressed a desire to place the DirectAccess server between two firewalls (firewall sandwich) in order to explicitly control access from the DirectAccess
server to the internal corporate network. While at first this may sound like a sensible solution, it is often quite problematic and, in my opinion, does little to improve the overall security of the solution. Restricting network access from the DirectAccess
server to the internal LAN requires so many ports to be opened on the inside firewall that the benefit of having the firewall is greatly diminished. Placing the DirectAccess server’s internal network interface on the LAN unrestricted is the best configuration
in terms of supportability and provides the best user experience."
Kindest Regards
John Davies
Thank for your reply and information John. I find it somewhat disappointing that Microsoft does not provide much more in the way of documentation and information regarding this topic. I required more information to show to our security team so they will allow
us to have the internal facing NIC not have more restrictive rules in place as it is a security concern.

What are the proper settings for export to Windows DVD Creator?

I'm trying to write some DV-Widescreen material to a DVD using Windows DVD maker (hey, it's free.)    So far I've tried "H.264", "MPEG2" and "DVD-Wide" settings, and various permutations.
I either get a single file (.mp4) which Windows DVD Maker won't recognize at all, or I get three separate files: .m2v, .wav, and .xmp.   The only one Windows DVD Maker recognizes is the m2v file, which is video-only (no audio).
Seems like this should be really simple given the awesome power of Media Encoder, but I can't find the right combination of settings.    Can anyone help?

Use "MPEG-2 DVD" and in the settings panel, under the MULTIPLEXER tab, change Multiplexing from "NONE" to "DVD" - this will output a single file that DVD Maker will accept.
Under AUDIO tab, I set audio to Dolby and DVD Maker accepted the result. I don't have any speakers attached to the test computer at the moment, nor did I burn a test DVD, but the fact that DVD Maker readily accepts the file suggests that all will be fine. You might also try MPEG audio, see what works for you, but Multiplexing is the key.
While DVD Maker does accept the AVI file you gave it, keep in mind that you are then rendering TWICE, once to AVI, and then DVD Maker needs to further transcode the AVI to MPEG-2 for the DVD. Makes more sense to render direct to MPEG-2 DVD format and be done with it.
Thanks
Jeff Pulera
Safe Harbor Computers

Best Export Settings for a (gulp) Windows Environment

I hate even asking this. I mean, I bought my own MBP and projector so that I maintain total control of all my presentations.
Well, a situation has arisen where I'd like to hand my Keynote presentation to a Windows setup on a USB thumb drive - for them to play for me.
The presentation consists mainly of full-screen photographs ... and a little accompanying text. No video ... no audio.
What do you recommend for export parameters? It sees that when I choose QuickTime that the whole presentation looks fuzzy - definitely not as sharp as the original.
Many thanks.

export as ppt or clickable pdf
both can be shown from a pc with no loss of quality, only loss of (some) animations

What is different in deployment settings for 1033 in windows vs Linux

Hi,
I could not find correct source which could explain the variation in deployment settings while deploying my appliaction in windows and Linux.
here is the scenario (10133)
windows:
When I deploy my ear with class loading path ( 3rd step in deployment @Configure Application Libraries)as default one i.e i dont specifiy any , the deployment is sucessful
where as in Linux:
I have to specify the class loading path to ear exploded directory in order get the application working. If i dont specify the path, the application wont start up , complains that some of the classes are not in class path.
Please, can you expalin the cause or point me to location which explains this ?
Thanks

Please post some more information -- I can't offer much based on this. How is your application packaged -- you should not need to do what you are doing on Linux to pick up classes contained within the application itself, provided they are packaged and exposed using the standard J2EE/J2SE mechanisms.
-steve-

How do I change the default settings for opening new window?

Everytime I click on a link, new window would only open in new tab not new window. How would I change this default to open new windows instead of new tab?
Thanks.

HI,
From the Safari Menu Bar click Safari/Preferences (or Command + comma on your keyboard).
Click Tabs. You can set your preferences there.
Carolyn
Message was edited by: Carolyn Samit

Basic settings for the main window

How do I set a frame fullscreen or minimize it? How can I replace the coffee cup logo in the upper left corner to something other? I have tried to search the API but have not found anything.

I might help yout with the maximized state and the frame icon:
ImageIcon i = new ImageIcon("c:/test.gif");
JFrame f = new JFrame();
f.setIconImage(i.getImage());
f.setExtendedState(JFrame.MAXIMIZED_BOTH);To set the frame to "real" fullscreen (removing the title bar), set:
JFrame.setDefaultLookAndFeelDecorated(false);I think, that some of these solutions require jdk 1.4.x

How Do I Change Trackpad Settings on the "Windows" Side of the MBA?

Happy to report that I succesfully installed Windows XP on my MBA SSD. However, I can't seem to find the options in Windows XP to change the trackpad settings (e.g., click with touch, speed, etc.). I see mouse, keyboard, etc. settings but no touch/track pad. Any direction would be much appreciated.
Thanks in advance!

My understanding is there is no hardware driver written for windows side for the hardware in the MBA. I wish there was, I love my MBA - but I use it primarily as a windows XP machine.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Serial Number (system):          7302300GANE
Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State:          Enabled

EDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!

Magic Mouse Guide for Windows 7 and Vista,,,

Hello All,
I recieved my Magic Mouse and it works great under OSX but I couldn't get it working under Windows at all. Searching here and around the web, I've compiled a guide on how I got it working. Hopefully, Apple will release proper drivers in the future but for now, here is what I did:
Turn mouse off...if you have already tried installing, remove the device and then turn the mouse off. To remove it, open Start, type "Devices" and press enter. Select "remove device"...Now let's get started:
1) Update the Bluetooth Driver.
Open Device Manager.
Start > (Right Click Computer) > Properties. Click Device Manager in upper left of this window. Double click (Bluetooth Radios), Right click on "Generic Bluetooth" and select "Properties". Open the Driver tab and then select "Update Driver". Click "Browse my computer for driver software". On the next screen, towards the bottom, click on "Let me pick from a list of device drivers...". Uncheck "Show compatible hardware". Select "Apple" and then "Apple built in bluetooth". Done
2)In the notification area of the task bar, right click on Bluetooth icon and select "Add a device". Turn on your mouse. It will show up on screen. Right click on the mouse icon. Select Properties. Select the "Services" tab and check the "Drivers for keyboard, mice, etc". The mouse may disappear from the screen since it's been added. Windows is still looking for other devices so click "Cancel".
3) Disable power management for Bluetooth Radio. Open device manager, open Bluetooth Radios and right click on "Apple Bluetooth". Select the "Power Management". Uncheck "Allow the computer to turn off this device to save power".
4) Reboot computer. Mouse should be working in Windows 7/Vista now.
* If you reboot and your mouse is still not working, click on the mouse two or three times. On my system, the mouse will not begin working until I do this, every time I boot my system. *
Hope this helps,
Al

if you go to
http://support.apple.com/kb/DL952
then download this package
and extract the AppleWirelessMouse.exe or AppleWirelessMouse64.exe
you then can run this on your windows PC and execute this
this enables scrolling functionality of the Magic Mouse
do not execute the downloaded file directly because it will tell you it doesn't run on this computer ( which is logical because of pc hardware =/= Mac hardware )
i hope it works for everybody
for me it does..
it recognizes my Magicg Mouse and i now also have scrolling enabled

TS3048 Is there a way to "calibrate" the magic mouse? I have rearranged settings for mouse, air-cleaned, tried different surfaces, however, it seems to be misinterpreting finger movements and randomly trying to open launchpad when enabled.

Is there a way to "calibrate" the magic mouse? Batteries are good. I have rearranged settings for mouse, air-cleaned, tried different surfaces, however, it seems to be misinterpreting finger movements and randomly trying to open launchpad when enabled-flashing between the app I am in and launchpad. When right-click is enabled I have to go to the extreme upper left of mousepad to click or it is interpreted as right-click. Won't consistently "scroll". Suggestions?

Here's some things you could try....
Reset your computer's PRAM
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Mac OS X: Starting up in Safe Mode
http://support.apple.com/kb/HT1455

Mouse settings for Revit on Windows 7 Side of iMac

Similar Messages

Maybe you are looking for