Mouse skip imac 27 (ATI Radeon HD 5750) and second monitor

Hi
Yesterday i bought a new mousepad and a second monitor
I noticed that i had some trouble with my mouse skipping around the monitor, and my first thought was for my mousepad texture, but is not that
this morning i tried:
- with different surfaces, but with no luck - still skipping around
- try different mouse: a small laptop mouse - still skipping around
- try different mouse: old mighty mouse (USB) - still skipping around (it is also very slow even a top speed)
- then i try different USB ports - still skipping around
after that i thought at yesterday changes... since the mac is new, i did install some different software and A NEW MONITOR
so i tried to unplug the new monitor and the mouse works fine.... i actually got a little worried
i did plug the monitor again, turn it back on and everything worked... turn monitor off and mouse skips around
SO.. the problem is that with a second monitor pluged in but turned off, mouse get crazy
CAN'T MOVE THIS DISCUSSION OR DELETE? WRONG CATEGORY

https://discussions.apple.com/message/15340928#15340928

Similar Messages

Crash with ATI Radeon X1900 XT and second HD display (DVI) ?

hi ! i have a realy tough one for you guys : since 3-4 days i've been getting this realy strange (and scary!) kernal panic screen / crashes / freeze with my macpro dual 2.66 with ati radeon X1900 xt.
the crashes keep coming while doing extensive work (video converting, renders) or just letting the macpro running doing nothing much all night long...
now this is what i found for now : if i disconect my 2nd display (samsung syncmaster 2493hm HD in DVI 1080p) it seem to be stable. when i reconnect it sometime it can run again with this 2nd display for a while but when i leave a render all night long the next morning it will be frozen, nothing on screen (all black).
after rebooting it get this crash report from the system :
Maccinachheeke-pabcapk cat0etiabies 0x00000000000000000000006:
6 ereerr--i oporgingngnkbeaachineck Maehik ne-a0h0h ck stat00t000000000 r0es0
reteattartPvvl Ili maaliceicdn mchk aiog eproMh
rekroi-MCpor reorrosg-:
porttMCrSTregt(i_MC 0xSTATUS(er40_S x20210(0x0nv0TalU00xx002in000iS10000002405)100l00U I0nva0M 0xS
IS(0x0A30:_M0U2(00ATU5S(2xx00200TA00000x00400000IAinv2li00lC
20IAA00200_inv0xid
0IA3: 3_d0000AT0)000000d)0000n00a00d000nA0v0l0d
I3S22_v4USi3SIA0411): 0400 0x0U0000020000 00100 00vl00
0 I0A3011CivAA32_SM_441SxTUTb0004100)000vb01001iA 00led 0I cva00 i e r cI:S(0xe0 1 ):(0 : 041e5)b x000b 800de:fix 4arrld
Mo MAA e8atr code inf 00: 0 0x00 St
00s00ode
spSccifsic codr
texr ccorre02sor:
0 8O4x0
r erder in orrmt n ded0000: 0x1rp0000Satus bitts:
b 0ts:4ssor PMroexce Chtsscorrupt, tconad:
e0x3re1cor,rtr epo:bl ed err: E0)roncirters0: 0
8ernc0ro,rrR2: 0xected error
CR3: 0x00e7a000, CR4: 0x000006e0
EAX: 0x24f9bed8, EBX: 0x1a6f198a, ECX: 0x1a6f198a, EDX: 0x004bc870
ESP: 0x24f9bebc, EBP: 0x24f9bf08, ESI: 0x00001e27, EDI: 0x035e1718
EFL: 0x00000006, EIP: 0x0019e9c0
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x439d58 : 0x128d0d (0x3cc65c 0x439d7c 0x131f95 0x0)
0x439d98 : 0x1a42cb (0x3d27fc 0x0 0x35e1718 0x12)
0x439f58 : 0x19c103 (0x439f70 0x0 0x0 0x0)
0x24f9bf08 : 0x135888 (0x1a6f164f 0x35e3d40 0x3f91084 0x2)
0x24f9bf58 : 0x1359c9 (0x13d8a2 0x0 0x0 0x19e23a)
0x24f9bf78 : 0x13da53 (0x13d8a2 0x0 0x0 0x0)
0x24f9bfc8 : 0x19b21c (0x0 0x0 0x19e0b5 0x4ebf4c0) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 2 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.170.13.1)
Network Service: AirPort, AirPort, en2
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: ST3250820AS P, 232.89 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: USB RECEIVER, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown
FireWire Device: GSA-5163D Super Multi DVD Rewriter, HL-DT-ST, Up to 400 Mb/sec
FireWire Device: My Book Device, WD, Up to 800 Mb/sec
here's my complete config if it can help :
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B04
SMC Version: 1.7f8
ATI Radeon X1900 XT:
Chipset Model: ATY,RadeonX1900
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-140
EFI Driver Version: 01.00.140
Displays:
SyncMaster:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Television: Yes
S/M 955SL:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
anyone ever see this problem ? at 1st it seem to be related to my ATI card... but i'm no expert so if anyone can understand part of the crash log let me know ! thanx !!
also forget to say : did all the full apple hardware test + tech tool pro test (app that come with apple care) and nothing was wrong, all ok.
+
francis.t
montreal
Message was edited by: francis.t

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

10.6.4 / iMac ATI Radeon HD 5750 graphics bugs

Once again, ATI drivers suck, this time my new iMac has clearly visible artifacts that make pretty much any game unplayable. I'd attach a screenshot except you can't here.
Is this a known bug already, if so, when will there be a fix?

I think I've the same problem.
I try to play the sims 3 for eg. and i've an error of unsupported graphic card :S

Compatible video card upgrade for my ATI Radeon HD 5750 with 1GB of GDDR5 memory, iMac 27 " mid 2010 2.93 GHz

My graphic card (ATI Radeon HD 5750) is completely taking a dive. What I need to know is what I can upgrade this card with... Can anyone give me some advice here? If I am going to replace it, I may as well upgrade!
Thanks for your help!!

How is this problem resolved...I am having the EXACT same problem???

ATI Radeon HD 5750 1GB -- Good for GIS?

Looking for new Mac workstation to run QuantumGIS, considering 27-inch 3.2GHz with upgraded graphics and 8GB RAM.
Are owners of iMac with ATI Radeon HD 5750 1GB impressed with graphics performance?
Anyone else going GIS work on an iMac?

That Radeon card is MORE than powerful enough for GIS.

How to install drivers for ati radeon 3200?and how to config xorg.co ?

how to install drivers for ati radeon 3200?and how to config xorg.conf?

mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
Hello
I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
#pacman -Sy
#pacman -S -l | grep -i catalyst
#pacman -S catalyst catalyst-utils
After installation reboot your machine in runlevel 1. (single mode). Ensure "fglrx" module is loaded correctly using
#lsmod | grep -i fglrx
If the resultant output have "fglrx" part the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
#cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
Then issue
#aticonfig --initial --input=/etc/X11/xorg.conf
This will create a new xorg.conf file. Now we can test our confign.
#telinit 3
I am using runlevel 3 to avoid graphic messup!!
issue
#gdm
If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
To know your ati driver is working correctly issue as root
#fgl_glxgears
If gears are rolling happily it seems correct. You can also know more about installed ati driver
#fglrxinfo
Now the installed driver version is in the output
If there is any problem try following
##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
yes video playback is choppy until i ran :-
sudo aticonfig --overlay-type=Xv
Try adding the following to the 'Device' section in /etc/X11/xorg.conf
Option "TexturedVideo" "true"
### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
mythfrontend --geometry 800x600
Append the "Device" Section of /etc/X11/xorg.conf file as follows;
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "on"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
export LIBGL_ALWAYS_INDIRECT=true
####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
####### as in the following example
title Archlinux Ice Kernel
root (hd0,1)
kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
initrd /boot/kernel26-ice.img
NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!! ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
Wish U good luck
mvdvarrier

IMAC i7 radeon hd 5750 update ati driver boot camp

So basically I have a 2010 iMAC i7 with a radeon
HD 5750 graphics card. Now to my question: I've recently installed win 7 proffesional
Using bootcamp and would like to update the ati driver
to which ever is most recent off AMD website, as I assume doing so
may boost video performance in the games I'm currently playing, as opposed to the
Outdated drivers installed via boot camp.
I however am not sure if I need to uninstall the boot camP video drivers
first, or how to go about doing so as I don't see any on list
Of installed programs. I already know the iMac video card is REALLy Radeon Mobility 5850, not hd 5750
as stated by apple, just need to know if I should uninstall my current video driver in windows 7 before trying to install the most recent mobility 5850 drivers from AmD site, if it's even worth it.

How is this problem resolved...I am having the EXACT same problem???

Aperture 3, Snow Leopard, iMac ATI Radeon X1600 and graphics issues

I have been searching the web to see if 10.6.4 has finally solved the graphics issues with the white iMac 2.16 intel with the ATI Radeon X1600 graphics processors and seen some mixed reviews. What is the consensus here, has 10.6.4 finally solved the graphics issues when editing photos in Aperture 3 (not to mention problems with iPhoto and iChat also). I had to downgrade to Leopard before so I don't want to upgrade to SL again and go back down the downgrade path. Thanks in advance for the feedback

I can say that 10.6.4 has worked out the kinks for my white 24" iMac with 7300GT card. From what others have posted here, it appears the x1600 issues have been resolved as well. I was running 10.6.2 prior to this update and advising everyone else of same. Of course, 10.6.2 and SL was not perfect, with some issues cropping up here and there. IMHO the 10.6.4 release is equivalent to the 10.5.3 release by comparison. In fact, I upgraded my Mac mini after my good experiences with 10.6.4 on my iMac. Not sure if this helps or not.

Xorg: blank screen, mouse cursor only - ATI Radeon HD3450

Last friday, my old Nvidia card died (overheated, I think). I got a replacement today: an ATI HD3450 card by Asus (R600 series). This is an old PC with an AGP slot, so my options were unfortunately limited. I was looking for a Nvidia replacement originally, to avoid having to reconfigure stuff, but that turned out to be too hard. So I got an ATI card instead. I regret this decision now... it works fine in console mode, but I can't get it to work in X.
I've tried radeon and radeonhd drivers. I'm reluctant to try catalyst, seeing as they do not support the current kernel version (2.6.32) and I don't want to downgrade.
radeonhd (xf86-video-radeonhd) is just a disaster. When I try to start X, all I see is a screen which is mostly black, except for a garbled band of about 1/4th the screen height, mostly white with some random colours thrown in.
radeon (xf86-video-ati) doesn't work either. When X starts, all I see is the mouse cursor. And nothing else. Just a black screen with a mouse cursor. The funny thing is, it's all there, I just can't see it. When I tried "startxfce4", the cursor would change shapes when it was over window edges or text boxes. But they were invisible. Too bad.
When I run "startx" as root, I see a couple of twm windows (the default configuration, I normally don't use X as root), and I can interact with them, but it's as if the screen isn't refreshed properly. When I move a window, it isn't redrawn, but it was definitely moved, because when I enter text in it, the text appears at the new position. The 'vesa' driver works, but I can't use that for obvious reasons.
I have read the wiki article about ATI drivers and tried some of the things mentioned there (no xorg.conf, simple xorg.conf with some combinations of the sections mentioned, ...). I'm pretty sure the problem isn't KMS-related, because it's disabled by default with the 2.6.32 kernel.
What pisses me off the most is that I get no error messages whatsoever, so I haven't a clue what could be the problem. I'm working on getting some Xorg.0.log output in this thread ASAP.
Anybody have any idea what could cause this? I would really like to get this working soon. It would kinda suck if it turns out I've replaced an unusable graphics card with another unusable graphics card.
If the radeonhd problem is easier to solve, then solutions for that are welcome as well. I just need a working driver that can handle compiz, and doesn't require me to downgrade my kernel.
EDIT: Xorg.0.log contents, enjoy!
X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux arch 2.6.32-ARCH #1 SMP PREEMPT Tue Feb 9 14:46:08 UTC 2010 i686
Kernel command line: root=/dev/sda6 ro vga=838 radeon.modeset=0
Build Date: 17 February 2010 07:52:42PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 2 17:45:35 2010
(II) Loader magic: 0x81e4ca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 1002:95c6:1043:0028 ATI Technologies Inc RV620 LE AGP [Radeon HD 3450] rev 0, Mem @ 0xe0000000/268435456, 0xf9000000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) Primary Device is: PCI 01@00:00:0
(II) RADEON(0): TOTO SAYS 00000000f9000000
(II) RADEON(0): MMIO registers at 0x00000000f9000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3450" (ChipID = 0x95c6)
(--) RADEON(0): Linear framebuffer at 0x00000000e0000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1043 SubsystemID: 0x0028
IOBaseAddress: 0x9000
Filename: SV31552.bin
BIOS Bootup Message:
95C6.10.88.0.19.AS02
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x1fffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x1fffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 600000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will not try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=524288K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 600.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=120000; xclk=40000
Shared DDC line: 0 3
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: HDMI-0
Connector: HDMI-A
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e60
(II) RADEON(0): Port2:
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_KLDSCP_DAC2
DFP2: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e50
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:DDC control interface" registered at address 0x6E.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: AIC Model: 23 Serial#: 673
(II) RADEON(0): Year: 2007 Week: 26
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing not preferred mode in violation of standard!
(II) RADEON(0): redX: 0.648 redY: 0.335 greenX: 0.282 greenY: 0.604
(II) RADEON(0): blueX: 0.150 blueY: 0.072 whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x864@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
(II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 119.0 MHz Image Size: 470 x 300 mm
(II) RADEON(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) RADEON(0): Serial No: 00673
(II) RADEON(0): Ranges: V min: 55 V max: 75 Hz, H min: 24 H max: 83 kHz, PixClock max 150 MHz
(II) RADEON(0): Monitor name: H-W22 DVI
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0005232300a1020000
(II) RADEON(0): 1a110103802f1e78e837a0a655489a26
(II) RADEON(0): 125054bfef808140818081c09500950f
(II) RADEON(0): b300010101017c2e90a0601a1e403020
(II) RADEON(0): 3600d62c1100001a000000ff00303036
(II) RADEON(0): 37330a20202020202020000000fd0037
(II) RADEON(0): 4b18530f000a202020202020000000fc
(II) RADEON(0): 00482d573232204456490a2020200061
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: AIC Model: 23 Serial#: 673
(II) RADEON(0): Year: 2007 Week: 26
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing not preferred mode in violation of standard!
(II) RADEON(0): redX: 0.648 redY: 0.335 greenX: 0.282 greenY: 0.604
(II) RADEON(0): blueX: 0.150 blueY: 0.072 whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x864@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
(II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 119.0 MHz Image Size: 470 x 300 mm
(II) RADEON(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) RADEON(0): Serial No: 00673
(II) RADEON(0): Ranges: V min: 55 V max: 75 Hz, H min: 24 H max: 83 kHz, PixClock max 150 MHz
(II) RADEON(0): Monitor name: H-W22 DVI
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0005232300a1020000
(II) RADEON(0): 1a110103802f1e78e837a0a655489a26
(II) RADEON(0): 125054bfef808140818081c09500950f
(II) RADEON(0): b300010101017c2e90a0601a1e403020
(II) RADEON(0): 3600d62c1100001a000000ff00303036
(II) RADEON(0): 37330a20202020202020000000fd0037
(II) RADEON(0): 4b18530f000a202020202020000000fc
(II) RADEON(0): 00482d573232204456490a2020200061
(II) RADEON(0): Panel infos found from DDC detailed: 1680x1050
(II) RADEON(0): EDID vendor "AIC", prod id 35
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Output DVI-0 connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output DVI-0 using initial mode 1680x1050
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit e0000000 0 0
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(==) RADEON(0): Using 24 bit depth buffer
mc fb loc is 00ff00e0
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x20000000
(II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262144 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00b7c000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00b80000
(II) RADEON(0): Will use 11760 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 11760 kb for back buffer at offset 0x00b84000
(II) RADEON(0): Will use 11760 kb for depth buffer at offset 0x01700000
(II) RADEON(0): Will use 112640 kb for textures at offset 0x0227c000
(II) RADEON(0): Will use 114192 kb for X Server offscreen at offset 0x0907c000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [agp] Mode 0x1f00421b [AGP 0x10de/0x00e1; Card 0x1002/0x95c6 0x1043/0x0028]
(II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xf0000000
(II) RADEON(0): [agp] Ring mapped at 0xb712c000
(II) RADEON(0): [agp] ring read ptr handle = 0xf0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb72fb000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xf0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xa6ebd000
(II) RADEON(0): [agp] GART texture map handle = 0xf0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xa523d000
(II) RADEON(0): [drm] register handle = 0x2f200000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x00ff00e0 is: 0x00ff00e0
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x0000de00
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x0000de00
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Offscreen pixmap area of 116932608 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Mode 1680x1050 - 1840 1080 9
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x0000de00
freq: 119000000
best_freq: 119000000
best_feedback_div: 119
best_ref_div: 3
best_post_div: 9
(II) RADEON(0): crtc(0) Clock: mode 119000, PLL 119000
(II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x77(119), pdiv 9
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Mode 1680x1050 - 1840 1080 9
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x0000de00
freq: 119000000
best_freq: 119000000
best_feedback_div: 119
best_ref_div: 3
best_post_div: 9
(II) RADEON(0): crtc(0) Clock: mode 119000, PLL 119000
(II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x77(119), pdiv 9
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r600_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 444 x 277
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device PS2++ Logitech MX Mouse
(**) PS2++ Logitech MX Mouse: always reports core events
(**) PS2++ Logitech MX Mouse: Device: "/dev/input/event4"
(II) PS2++ Logitech MX Mouse: Found 12 mouse buttons
(II) PS2++ Logitech MX Mouse: Found scroll wheel(s)
(II) PS2++ Logitech MX Mouse: Found relative axes
(II) PS2++ Logitech MX Mouse: Found x and y relative axes
(II) PS2++ Logitech MX Mouse: Configuring as mouse
(**) PS2++ Logitech MX Mouse: YAxisMapping: buttons 4 and 5
(**) PS2++ Logitech MX Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS2++ Logitech MX Mouse" (type: MOUSE)
(**) PS2++ Logitech MX Mouse: (accel) keeping acceleration scheme 1
(**) PS2++ Logitech MX Mouse: (accel) acceleration profile 0
(II) PS2++ Logitech MX Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x00000000
(II) RADEON(0): avivo_restore !
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Another update: the card seems to work just fine under windows, so it is definitely a configuration or driver issue.
Last edited by Sander (2010-03-02 17:12:40)

"Enabling KMS will make Xorg fall back to software rasterizing, at the cost of 3D performance. " <- is this still true at the moment? In that case, enabling KMS really isn't the solution I'm looking for. Back to square one
This is not true. Software rasterization indicates that KMS was not set up correctly. You will get 3D acceleration with KMS correctly configured.
Thanks for taking the time to reply
I'll give enabling KMS a try. What thread is it that you're talking about? Also should I follow the "early start" or "late start" instructions?
EDIT: I'm guessing you mean this one? http://bbs.archlinux.org/viewtopic.php?pid=613720
That thread is the one I meant.
Your xf86-video-ati doesn't have support for KMS - you have to rebuild it against libdrm_radeon. This also means that you have to rebuild mesa against same new libdrm because mesa doesn't have KMS support without libdrm_radeon either.
Is this information applicable to my situation? No instructions on how to do this are provided, so I have no idea how to try it, or if it's worth trying at all.
Yes, this is a problem. You have to modify a PKGBUILD or two and build/install the packages in the correct order. I detail the right way to do everything below.
I used the following packages:
* kernel26-git: http://aur.archlinux.org/packages.php?ID=25304 (you must configure with CONFIG_DRM_RADEON=m. CONFIG_DRM_RADEON_KMS=y enables KMS by default. you should be presented with a configuration menu when the package builds. type '/' to search.)
* kernel26-firmware-git: http://aur.archlinux.org/packages.php?ID=25782
* radeon_ucode: http://aur.archlinux.org/packages.php?ID=33016
* libdrm-git: http://aur.archlinux.org/packages.php?ID=10254 (you must edit the PKGBUILD to enable radeon support, see below)
* glproto-git: http://aur.archlinux.org/packages.php?ID=18964
* dri2proto-git: http://aur.archlinux.org/packages.php?ID=19051
* libgl-git: http://aur.archlinux.org/packages.php?ID=19044 (this is out of date and requires a patch. see my comment on the AUR page)
* mesa-git: http://aur.archlinux.org/packages.php?ID=8266 (you can reuse src/mesa from libgl-git, it clones the same repository)
* xf86-video-ati-git: http://aur.archlinux.org/packages.php?ID=15374 (you can reuse src/mesa from libgl-git)
libdrm-git PKGBUILD:
sh autogen.sh --prefix=/usr \
--enable-nouveau-experimental-api \
--enable-udev || return 1
# --enable-radeon-experimental-api
libdrm-git PKGBUILD modified:
sh autogen.sh --prefix=/usr \
--enable-radeon-experimental-api \
--enable-udev || return 1
Install those packages in that order and add yourself to the video group. Make sure that your grub configuration has an option to select the new kernel. Also make sure all of your PKGBUILDs from AUR are up to date. A week or two ago they were all wrong (as a noted above, one of them is still wrong and requires a patch).
I hope that helps. Eventually Arch will support KMS for radeon by default, but the driver and the kernel need to go through another release or two.
Last edited by tss (2010-03-02 20:34:52)

How can I update ati radeon hd 5750 1024 mb on my mac os lion 10.7.5

How can I update my grafic card Ati Radeon 5750 1024 mb ? I recently updated my Aerofly 5 sim software , which now does not work because ,so I am told , the grafic card has to be updated ! Thanks for any help .

You cannot change the graphics card, and Mac OS X 10.7.5 has the latest drivers available for your system. The system requirements for Aerofly state that they only support the 5770 of the 57xx series, not the 5750, so there may be nothing you can do, though you can ask in their forums and see if anyone there can offer a workaround.
Regards.

IMac ATI Radeon HD Graphics Firmware Update 1.0.1

http://www.apple.com/support/downloads/imacatiradeonhdgraphicsfirmwareupdate101. html
I have a 24inch imac with ATI Radeon HD 2600, ROM Revision: 113-B2250F-219.
Upon trying to install the update, it says my computer doesn't need it, even though it looks like my rom is older than the version in the update (113-B2250L-259).

according to ASP on my 20inch iMac Alum;
ATI Radeon HD 2400 XT:
Chipset Model: ATI,RadeonHD2400
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x94c8
Revision ID: 0x0000
ROM Revision: 113-B2250A-207
EFI Driver Version: 01.00.207
And the installer does not continue at all but just say that I do not need the update...

ATI Radeon 7000 series and Photoshop CS5 and CS6

Interesting to note, Running windows 7 64bit I have bought a new graphics card, it is an ATI Radeon HD7900 bought to run Photoshop CS5 and 6 unfortunately the graphics card is not displayed in the photoshop prefrences, I checked the list of cards supported by Adobe and the Radeon 7000 series was listed.....I rang Adobe who states that the HD7000 is not supported, so until (if ever ) it is I cannot use the full functionality of Photoshop CS5 extended. I'm not sure if all the Radeon HD cards are supported or not, but maybe check before you invest in a new card.

The Radeon 7000 series cards should work fine with both CS5 and CS6, but as Steve noted there is a problem with the current drivers for the card. Until the 12.7 driver is released next month, I'd suggest using the following driver:
http://support.amd.com/us/kbarticles/Pages/AMDCatalyst126beta.aspx
Use the control panel on your system to completely uninstall your current driver before installing the 12.6 beta driver. Please let us know if the beta driver resolves the issues you're seeing.
Thanks,
Adam

ATI Radeon X1900 XT and Color

Hi Guys,
sorry to post this here but couldn't think where else to ask this. Looking at the recommended specs for the Final Cut Studio 2 and especially Color. The recommended card is the ATI Radeon X1900 XT, what is it about this card that Apple recomend it so highly?
The reason I ask is because I've seen a great card that had 320GB VRAM but hope it works with color and motion 3
What do you guys think?
James
Dual 2.3Ghz PowerMac G5, 1.5 Ghz Powerbook G4 Mac OS X (10.4.6)

umm, i was advised while on a color demo pod at NAB with the writer of the product manual that the 1900 card is the sweet spot there. that's all the guidance i need. use what you want at your own risk.

ATI Radeon 9000 Pro and 1440x900 resolution on G4?

I am looking to purchase a new widescreen monitor (Viewsonic VA1912WB) which supports a native resolution on 1440x900. I am trying to determine if the ATI Radeon 9000 Pro card will properly support this resolution. Anyone have a clue, or tried it yourselves? Thanks!

I had found that page and had drawn the same "hopeful" conclusion that you are suggesting. I also looked in my displays preference pane and noticed quite a few options that aren't on the ATI site as "supported displays," which leads me to believe it's possible.
I've checked out some other boards (pc based) and they are able to make it work but it involves modifying all sorts of driver files. Stupid PC's!
Anyone else out there have the ATI card and the ability to test that resolution?

ATI Radeon 9600 XT and Nec Multisync 2690 Wuxi

Hi there,
I've just got myself a lovely new monitor, the 26" NEC Multisync mentioned above. Previously I had a 20" Formac monitor, and video played just fine. Now though I find most video - even cruddy low quality stuff on the web - plays in an exceptionally jerky way. Do I need a new graphics card, and if so which one? I've currently got an ATI Radeon 9600XT to go with my G5 PowerMac. I'm running 10.4.
Thanks for your help,
Jonathan

one of the first things i would do is check for dust causing your card to overheat, Ive pulled a few and seen this poor fate for them .... there is also a software based tool ATIcellerator that can software over/under clock most ATI cards, i limped along for about a year on an underclocked card before breaking down and replacing it

Mouse skip imac 27 (ATI Radeon HD 5750) and second monitor

Similar Messages

Maybe you are looking for