Mouse skipping wildly after waking from sleep

Not sure if I've fixed this already yet or not but, sometimes after waking from sleep my wireless mighty mouse has a bad delay (skips around a bit too). I'm using Steer Mouse (which seemed to preform normally) but have uninstalled it just to see if it was the problem. So far, so good: no mouse problem after sleep, though I've only tried it a few times.
Anyone having this problem who doesn't have Steer Mouse installed?

same prob but with the trackpad. I don't think it is a prob with your particular mouse. There is a few other topics covering this.
Common theme... only a reboot will fix.

Similar Messages

  • Unable to get keyboard or mouse focus back after waking from sleep

    Here's a problem with very specific symptoms, which I've seen on a number of Macs that I support:
    - After waking from sleep, the Macs are unable to fully achieve focus on any window. All windows, in all apps, appear to be in the background -- their frames have the lighter gray look of backgrounded windows.
    - I can grab any window and move it around, and even interact with elements of the window by clicking on them. I cannot, however, ever really bring the window to the front.
    - I can't type anywhere.
    - Regardless of what window I click on, the OS menu bar remains "stuck" on whatever app was in the foreground when the Mac went to sleep. Sadly, though, none of the menus can be selected or pulled down.
    The only way out of this state is to force a restart.
    I am wondering if anyone else has seen this behavior, or, better yet, has actually solved it.
    Thanks in advance!

    Check the Display & Enhance Contrast settings - System Preferences/Universal Access
    Or repair permissions and restart your computer.
    Or *Disconnect all peripherals from your computer.* Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select *Disk Utility.*
    Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
    Click _*Repair Disk.*_
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.

  • External keyboard and mouse not recognized after waking from sleep

    This started happening all of a sudden. It was working fine before that. When I disconnect the power cable, keyboard, and then connect them back, its not recognized. To make it recognize the keyboard and mouse, I have to logout and login or restart the laptop. I looked at this related post, but the PRAM reset fix did not work for me : http://forums.macrumors.com/showthread.php?t=870482
    Any idea how to fix it?
    OS version: 10.9.2
    MacBook Pro 13-inch Mid 2012
    Processor 2.9 GHz Intrel Core i7
    Memory 16GB 1600 MHz DDR3

    I have a similar problem on our G3 iBook with Panther. Most of the keys don't work, and of the four or five that do, they print only gibberish.
    For a while I had control of the "C" key, and I was able to start from the Installation CD-ROM. I ran Disk Utility. It found and repaired a whole bunch of permissions and reported no problem with the hard disk. But I still cannot use the keys, and since then I've lost the use of the "C" also.
    Because I cannot use the keyboard, I cannot type in my administrator's password, and for that reason I cannot use System Preferences to start from the Installation CD-ROM. I did not see the Hardware Test on the CD-ROM, but it sounds interesting.
    Any ideas on how to get back to the CD-ROM when my keyboard doesn't work?

  • After waking from sleep, my iMac (Lion) is unresponsive.  The mouse moves, but when I click things it won't open them.

    After waking from sleep, my iMac (Lion) is unresponsive.  The mouse moves, but when I click things it won't open them.
    This has happened EVERY time the iMac goes to sleep for the last few days.. the only way I have found to resolve the issue is to manually restart the computer each time via the button on the back of the iMac.
    Any and all help is appreciated!
    Thanks

    FWIW, I never sleep my machines or their HDs, just their displays and never have an issue waking up the displays, usually run 24/7. Give that a shot.

  • Odd Keyboard/mouse failure after waking from sleep

    Here's an odd problem that's been bugging me for awhile now.
    Occasionally my iMac will not allow me to log in after waking from sleep. I always log out of the machine when I'm not using it, and after a bit it goes to sleep (usually I'll just click the "sleep" button on the login display).
    It wakes up with a wiggle of the mouse (Wacom Graphire), a tap of the keyboard (recent wired but numeric-keypadless Apple) or if I hit the button on my Griffin Power Mate.
    But then I cannot do anything. If I click any of the edit boxes in the login window, or any of the buttons, the mouse jumps to the "sleep" button but does not click it. I can't enter a username or password because those edit boxes never get focus.
    The machine is otherwise alive, as I can ssh to it from another computer or my iPhone and then from the command-line do a
    $ sudo /sbin/shutdown -r now
    for an orderly reboot.
    Very bizarre and rather annoying ... this has persisted since I installed Snow Leopard. Clues, anyone?

    Some, but not all of the time that the tower goes to sleep, when it wakes up the mouse works, but the keyboard does not. A restart solves the problem, but that's not practical.
    My aluminum keyboard did exactly the same thing when used with the USB extension cable, but not when plugged directly to the computer. Usually, unplugging the keyboard for a few seconds would fix it. The Apple store replaced the keyboard, and I have had no problems with the new keyboard.

  • Loss of mouse control after waking from sleep

    I am running a Mac mini G4 (see specs below) with a remote Microsoft mouse-keyboard connection that uses a USB connection. I didn't turn on the computer for a month, I installed necessary updates to some programs, and control of the mouse pointer disappears after I waken it from sleep mode. I installed new batteries in the mouse, but it makes no difference. The keyboard works fine. Both the keyboard and the mouse were purchased with the computer, and I've never had a problem with either of them until now. What's wrong, and what can be done? Thanks very much. Peace.

    It's not an entirely unusual problem to have the mouse drop out when waking from sleep, and it's caused by the fact the system wakes before the connection to the mouse is re-established. To the system, that means the mouse appears to be missing, thus the driver doesn't load up for it. Cordless mice are amongst the most problematic in this respect because as the system wakes, not only does it have to recognize the cordless transceiver in time, but then also make contact with the mouse and correctly identify it. That isn't normally a problem, but it means almost anything that delays the chain of contact will result in the mouse failing to work. Note that if using a USB hub, this can exacerbate the problem significantly, so at least for testing, the mouse and keyboard should be connected directly to the system.
    There are a couple of simple tests to perform: firstly, does the mouse work perfectly when the system is booted rather than woken? Assuming it does, the next is whether the mouse works correctly if it is used to wake the system from sleep by clicking a button?
    If the mouse works correctly when the system is booted, then the problem is either that the mini's USB ports are not functioning entirely correctly, or that there is either a problem with the USB 'dongle' communicating with the mouse on wake up, or some interference in the area that is inhibiting error-free communication between the devices.
    In the latter instance, placing the mouse a few inches from the USB 'dongle' it communicates with and then waking the system is a good test, since the range is short and thus the risk of interference affecting communication is reduced. If it works like that, then you have something in the area that is causing communication problems.
    Assuming the mouse still doesn't work when left next to the dongle, then then next step is to try an PMU reset:
    -Unplug all cables from the computer, including the power cord.
    -Wait 10 seconds.
    -Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
    -Let go of the power button.
    -Press the power button once more to start up your Mac mini.

  • After upgrading to Tiger, freeze after waking from sleep on PM G4

    My experience with Tiger in the past week as not been great. The reason I upgraded was to get iSync 2.1, so that my Moto E815 phone could be sync'd with my OSX AddresBook and iCal. This wasn't possible with the latest version of Panther.
    So, I upgraded to Tiger 10.4.3, and now my G4 freezes immediately after waking from sleep. After pressing the 'return' key to wake the computer, the G4 sends a signal to wake the monitor, but on top of the screen saver is a black text box which states there was a problem I must press (and hold) the power button to restart the Mac. It's written in four languages.
    When I installed Tiger, I used the 'archive' option.
    My computer is a bit of a FrankenMac: Originally a G4/350 with AGP, upgraded with a Sonnet 1GHz G4 processor card, 1.12GB RAM, a 160GB HDD, an nVidia GeForce3 64MB AGP video card, Samsung DVD/CR-RW drive (Patchburn3) and a Belkin PCI card with 2 additional Firewire ports and 3 additional USB 2.0 ports. When I performed the upgrade, I had the keyboard and mouse plugged into the case USB 1.1 ports, a Logitech Notebook Pro USB camera plugged into the other case USB 1.1 port, and a D-Link BT120 USB->BT adapter plugged into one of the three USB 2.0 ports on the Belkin PCI card.
    When I check the Console logs after the rebooting, I see a kernal panic in the panic.log. Apple has received this a number of times from me in the past week as I keep sending them 'talkback' logs after the fact.
    I also see an error in the system.log which may reveal what is going on:
    Nov 20 18:54:40 localhost kernel[0]: standard
    timeslicing quantum is 10000 us
    Nov 20 18:54:40 localhost mDNSResponder-107.3 (Aug 22
    2005 11: 46:54)[44]: starting
    Nov 20 18:54:40 localhost kernel[0]:
    vmpagebootstrap: 284852 free pages
    Nov 20 18:54:40 localhost kernel[0]:
    migtable_maxdispl = 70
    Nov 20 18:54:40 localhost kernel[0]: 71 prelinked
    modules
    Nov 20 18:54:40 localhost kernel[0]: Copyright (c)
    1982, 1986, 1989, 1991, 1993
    Nov 20 18:54:40 localhost kernel[0]: The Regents of
    the University of California. All rights reserved.
    Nov 20 18:54:40 localhost kernel[0]: using 2949 buffer
    headers and 2949 cluster IO buffer headers
    Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270 Bus
    9 already taken
    Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270
    AppleUSBOHCI[0x2057000]::start OHCI controller will be
    unloaded across sleep
    Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
    TI ID 8019 built-in now active, GUID 000a27ff
    feb38fe6; max speed s400.
    Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
    VendorID 1033 ID cd PCI now active, GUID 0000303c
    0008c32e; max speed s400.
    Nov 20 18:54:40 localhost kernel[0]: Security auditing
    service present
    Nov 20 18:54:40 localhost kernel[0]: BSM auditing
    present
    Nov 20 18:54:40 localhost kernel[0]: disabled
    Nov 20 18:54:40 localhost kernel[0]: rooting via
    boot-uuid from /chosen:
    474ACE52-2523-3EE7-9C54-DDC3734C7922
    Nov 20 18:54:40 localhost kernel[0]: Waiting on <dict
    ID="0"><key>IOProviderClass</key><string
    ID="1">IOResources</string><key>IOResourceMatch</key><string
    ID="2">boot-uuid-media</string></dict>
    Nov 20 18:54:40 localhost kernel[0]: Got boot device =
    IOService:/Core99PE/pci@f2000000/AppleMacRiscPCI/pci-bridge@D/IOPCI2PCIBridge/ma c-io@7/AppleKeyLargo/ata-4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDevice/IOBlockStorageDriver/HDS722516VLAT80
    Media/IOApplePartitionScheme/AppleHFS_Untitled2@10
    Nov 20 18:54:40 localhost kernel[0]: BSD root:
    disk0s10, major 14, minor 10
    Nov 20 18:54:40 localhost kernel[0]: jnl:
    replay_journal: from: 2668032 to: 12288 (joffset
    0xe04000)
    Nov 20 18:54:40 localhost kernel[0]: Jettisoning
    kernel linker.
    Nov 20 18:54:40 localhost kernel[0]: Resetting
    IOCatalogue.
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 2
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 4
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 4
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 4
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 4
    Nov 20 18:54:40 localhost kernel[0]: NVDANV20HAL
    loaded and registered.
    Nov 20 18:54:40 localhost kernel[0]: CHUDProf.kext
    version: 4001000
    Nov 20 18:54:40 localhost kernel[0]: raw version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
    2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
    Nov 20 18:54:40 localhost kernel[0]: CHUDUtils.kext
    version: 4001000
    Nov 20 18:54:40 localhost kernel[0]: raw version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
    2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
    Nov 20 18:54:40 localhost kernel[0]: IPv6 packet
    filtering initialized, default to accept, logging
    disabled
    Nov 20 18:54:41 localhost kernel[0]: UniNEnet:
    Ethernet address 00:0a:27:b3:8f:e6
    Nov 20 18:54:41 localhost launchd: Server 292f in
    bootstrap 1103 uid 0: "/usr/sbin/lookupd"[42]: exited
    abnormally: Hangup
    Nov 20 18:54:41 localhost lookupd[56]: lookupd
    (version 365) starting - Sun Nov 20 18:54:41 2005
    Nov 20 18:54:41 localhost diskarbitrationd[36]:
    disk0s10 hfs
    474ACE52-2523-3EE7-9C54-DDC3734C7922 Onyx
    Nov 20 18:54:41 localhost kernel[0]: jnl:
    replay_journal: from: 1374208 to: 1564160 (joffset
    0x624000)
    Nov 20 18:54:41 localhost diskarbitrationd[36]:
    disk1s10 hfs
    947C0EA5-F775-330F-82D9-D2F8B65F7357 Backup
    /Volumes/Backup
    Nov 20 18:54:43 localhost kernel[0]: NVDA,NVMac: vram
    [98000000:08000000]
    Nov 20 18:54:43 localhost
    /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow:
    Login Window Application Started
    Nov 20 18:54:43 localhost loginwindow[72]: Login
    Window Started Security Agent
    Nov 20 18:54:44 localhost mDNSResponder: Adding browse
    domain local.
    Nov 20 18:54:45 localhost kernel[0]:
    UniNEnet::monitorLinkStatus - Link is up at 100 Mbps -
    Full Duplex
    Nov 20 18:54:45 Jason-Radtkes-Computer configd[34]:
    setting hostname to "Jason-Radtkes-Computer.local"
    Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
    executing
    /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-netw ork
    Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
    posting notification
    com.apple.system.config.network_change
    Nov 20 18:54:47 Jason-Radtkes-Computer lookupd[82]:
    lookupd (version 365) starting - Sun Nov 20 18:54:47
    2005
    Nov 20 18:54:49 Jason-Radtkes-Computer configd[34]:
    target=enable-network: disabled
    I suspect the problem where the USB devices are started, because I had that Bluetooth adapter plugged in at the time of the upgrade. I'm speaking of the lines in the log which start with 'USBF'. The keyboard and mouse are useless when the black screen shows up after waking from sleep.
    I've tried some of the suggestions I've found for the iBook 'wake from sleep' postings on macfixit.com and here - resetting NVRAM and removing a few of the .plist files. This didn't seem to help.
    I would greatly appreciate help in resolving this issue. I've been a Mac owner since the original Macintosh (it's still in my house) and am frustrated that this is the first problem I've encountered.
    Thanks in advance for your help.

    Thanks. In fact I had bought a new keyboard and mouse (Macally) and sure enough, if I unplug it before it reboots, the CD drive door stays closed and I can boot from a CD! I did not try any of the other stuff. Is there any way to get it to stop this? Why does a USB peripheral cause the CD to eject anyway? Would love to know!
    Ron

  • "Photoshop transparent background" after waking from sleep

    Anyone experienced this problem? Photoshop users will be familiar with the terms I'm using to describe this issue...
    After waking from sleep, my iMac will display the screen saver -- in this case, "Beach" -- in a frozen state (not moving at all). The photo has a lower opacity, with a checkered background similar to what you'd see in Photoshop when the background is Transparent rather than opague. Clicking on the mouse or keyboard has no effect, but when I turn the power off and then on again, all is back to normal, with the Leopard desktop and Dock back in their normal places.
    Is this the system freeze that folks have been talking about?

    Ok I am not that fmrealer with Photoshop. But this is what I would do.
    1. Resart my computer.
    2. Call apple or Photoshop.
    3. Re install Photoshop.
    4. It is not the end of the world and it sounds kind of cool.

  • Freeze after waking from sleep mode on MBP retina

    After waking from sleep mode my MBP retina freezes for 3-5 seconds. Mouse and touchpad don't work. I wonder if it's mountain lion problem or hardware problem. Anyone faced this?

    Just got a brand new model and OS X 10.8.2 (12C3012) and face the same issue, almost everytime it sleeps for too long. This is not a 3rd type SDD, this is a standard Apple SSD. I turned off the BT, I removed the almost every option from the battery saver mode. The current test is to disable the power nap - I will let you all know the result in a few hours.

  • My zero Key isn't working after waking from sleep mode. This is a real problem for me because my password contains a zero

    My zero Key isn't working after waking from sleep mode. This is a real problem for me because my password contains a zero.  I don't recall spilling anything or jamming it just that it worked before I closed the computer and wasn't after I woke it up.
    I would like to fix the key but if that's not possible right away , Is there a way to reset my password without being able to type with a key thats in it?

    Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
    When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
    A. run Disk Warrior
    B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks

  • Anyone's MacPro have problems after waking from sleep mode?

    After waking from sleep, my MacPro 2x2.4 Quadcore Intel Xeon freezes in several applications that had been running before sleeping. Mail and Firefox both get into endless loops trying to download data and will not force quit. Pulldown restart and shut down do not function when this is occurring. Must shuyt down manually from box and start again. Everything works fine again until it goes to sleep again.

    Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
    When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
    A. run Disk Warrior
    B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks

  • My macbook pro (lion 10.7.2) takes several minutes to connect to the internet after waking from sleep.  Is there any way to make this instant?

    Hi
    My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep.  Does anyone else have this problem and is there a fix?
    Alan

    coxorangepippin wrote:
    The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
    What that means is that is can't be used with Lion 10.7.  PowerPC was the chip Apple used up until 2006 when they switched to Intel.  At that point, they created the Rosetta emulator to allow for PPC support for 5 years.  They finally dropped the support with the release of Lion.  It will only work with OS X 10.6 or earlier.  The other option is to purchase a new GPS, which can be had for $100 for a decent one.

  • External Hard Drive Fail After Waking from Sleep

    Hi,
    I've been having this issue for over a year (since upgrading to Lion, and now still persists after upgrading to Mountain Lion), and I haven't been able to find the exact answer I need after searching through the posts here, and on the internet.
    I have a 2011 MBP, and after upgrading to Lion last year, I've noticed that my WD external hard drive for the Mac has issues to be recognized after the laptop wakes from sleep. The drive icons are still there on the desktop, and all the files are listed. However, I cannot open any of the files, and Time Machine backup automatically fails.I am able to eject the drives by dragging the icons into the trash can. However, nothing happens if I simply unplug the fire wire 800 cable and re-plug it into the computer after ejecting the drives. I need to reset the external drive by unplugging both the fire wire cable and the power supply, and replug everything.
    Aside from being a hampering process after waking from sleep, this is also very stressful on the drive itself, so I would like to fix this. Does anyone know the issue behind this or have a solution? Thanks in advance!

    Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK.  I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
    I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions..

  • Network connection after waking from sleep

    Hi... More or less any time I allow my MacBook Pro to go to sleep, when I wake it up I am nearly always disconnected from my Airport connection (I connect to a NetGear wireless router via my internal Airport card). I go up to the menu bar and click on the now grey airport icon and I do still see my network in the list of available networks. I click on it, after several seconds a message comes up that says "there was an error joining the Airport network "network name""... But I then simply click on OK (rather than Try Again, I've learned that by trial and error) and the network reconnects just fine... Then when I let the machine sleep again at some later time, I do that all again... Any suggestions of what might be going on??? I do have "Use Interference Robustness" turned on (not that I know why exactly) but I've also had it off before and that seems not to matter... Any suggestions??? thanks... bob..
    FW800 G4 dual 1.25 Ghz and 17 inch MacBook Pro Mac OS X (10.4.8)

    I have "join preferred networks" selected, and mine os the only one on the list, and it still does not connect after waking from sleep. It is WEP security, not WPA2. I checked out the following article, but it was of no help:
    http://docs.info.apple.com/article.html?artnum=304482

  • Kernal panics after waking from sleep on MBP

    I have a client machine that continues to crash after waking from sleep.  Most of the logs indicate its a USB driver issue but not all of them which make me question whether it is truly a USB issue.
    Here is the first log:
    Interval Since Last Panic Report:  42291 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    4D739B74-806B-4EE5-B643-3ABC69B99DB3
    Mon Jan 21 14:40:59 2013
    panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816c6e1f, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff806a45a628, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
    RAX: 0xffffff806a5541f8, RBX: 0xffffff806a554000, RCX: 0x0000000000826f90, RDX: 0x0000000000000000
    RSP: 0xffffff807e493bc0, RBP: 0xffffff807e493ca0, RSI: 0x000000807e878986, RDI: 0xffffff807e493c39
    R8:  0x000000000000001f, R9:  0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0xffffff800a69e600
    R12: 0xffffff806a458000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff807e493bc0
    RFL: 0x0000000000010286, RIP: 0xffffff7f816c6e1f, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0xffffff806a45a628, Error code: 0x0000000000000000, Faulting CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff807e493870 : 0xffffff8000220792
    0xffffff807e4938f0 : 0xffffff80002c4794
    0xffffff807e493aa0 : 0xffffff80002da55d
    0xffffff807e493ac0 : 0xffffff7f816c6e1f
    0xffffff807e493ca0 : 0xffffff7f816e3c05
    0xffffff807e493ce0 : 0xffffff7f816c5257
    0xffffff807e493d10 : 0xffffff7f80c9a832
    0xffffff807e493d50 : 0xffffff7f8174d4f0
    0xffffff807e493da0 : 0xffffff7f8174f692
    0xffffff807e493de0 : 0xffffff7f8174f7c4
    0xffffff807e493e20 : 0xffffff7f80c9e4c5
    0xffffff807e493e60 : 0xffffff7f80c9e628
    0xffffff807e493e90 : 0xffffff7f80ca1fd7
    0xffffff807e493ef0 : 0xffffff800063d4d6
    0xffffff807e493f30 : 0xffffff800063c250
    0xffffff807e493f70 : 0xffffff800063c0f4
    0xffffff807e493fb0 : 0xffffff8000820057
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000->0xffffff7f80cc7fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
             com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f81742000->0xffffff7f8179ffff
                dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
             com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c2000->0xffffff7f81728fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc8000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
    System uptime in nanoseconds: 42049368948948
    last loaded kext at 16300805887472: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f80795000, size 16384)
    last unloaded kext at 16406017984235: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f80795000, size 12288)
    loaded kexts:
    com.lightspeedsystems.kext.LsSaKernel64          2.0.0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.X86PlatformShim          5.0.0d8
    com.apple.driver.AGPM          100.12.75
    com.apple.driver.AppleMikeyDriver          2.2.5a5
    com.apple.driver.AppleHDA          2.2.5a5
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.driver.AppleIntelHD4000Graphics          7.3.2
    com.apple.driver.AppleSMCPDRC          5.0.0d8
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.ApplePolicyControl          3.1.33
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleBacklight          170.2.2
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.AppleIntelFramebufferCapri          7.3.2
    com.apple.driver.AppleUSBTCButtons          227.6
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
    com.apple.driver.AppleIRController          312
    com.apple.driver.AppleUSBTCKeyboard          227.6
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.iokit.SCSITaskUserClient          3.2.1
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCISerialATAPI          2.0.3
    com.apple.iokit.IOAHCIBlockStorage          2.1.0
    com.apple.driver.AppleFWOHCI          4.9.0
    com.apple.driver.AirPort.Brcm4331          561.7.22
    com.apple.driver.AppleSDXC          1.2.2
    com.apple.driver.AppleUSBHub          5.1.0
    com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleAHCIPort          2.3.1
    com.apple.driver.AppleUSBEHCI          5.1.0
    com.apple.driver.AppleUSBXHCI          1.1.0
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.4
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.2.5a5
    com.apple.driver.X86PlatformPlugin          5.1.1d6
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.AppleHDAController          2.2.5a5
    com.apple.iokit.IOHDAFamily          2.2.5a5
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.driver.AppleGraphicsControl          3.1.33
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
    com.apple.iokit.IOBluetoothFamily          4.0.8f17
    com.apple.driver.AppleUSBMultitouch          230.5
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.0
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.driver.AppleThunderboltNHI          1.6.0
    com.apple.iokit.IOThunderboltFamily          2.0.3
    com.apple.iokit.IOFireWireFamily          4.4.8
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IOEthernetAVBController          1.0.1b1
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOUSBFamily          5.1.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.8
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    System Profile:
    Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
    Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 6
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 5
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 9
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 4
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52f, 0x14100000 / 4
    Second log---------------------------------------------------------------------------- -----------------------------------
    Interval Since Last Panic Report:  18613 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    4D739B74-806B-4EE5-B643-3ABC69B99DB3
    Wed Jan 30 13:21:54 2013
    panic(cpu 2 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816d61f1, type 13=general protection, registers:
    CR0: 0x000000008001003b, CR2: 0x000000012562c000, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
    RAX: 0x480001eabd058d48, RBX: 0xffffff806a6af000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
    RSP: 0xffffff807ef03b60, RBP: 0xffffff807ef03b70, RSI: 0x000000000000012c, RDI: 0xffffff806a6af000
    R8:  0x000000000000001f, R9:  0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0xffffff80002dad00
    R12: 0xffffff806a6af000, R13: 0x0000000000000000, R14: 0xffffff806a6af000, R15: 0xffffff807ef03bc0
    RFL: 0x0000000000010282, RIP: 0xffffff7f816d61f1, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0x000000012562c000, Error code: 0x0000000000000000, Faulting CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff807ef03810 : 0xffffff8000220792
    0xffffff807ef03890 : 0xffffff80002c4794
    0xffffff807ef03a40 : 0xffffff80002da55d
    0xffffff807ef03a60 : 0xffffff7f816d61f1
    0xffffff807ef03b70 : 0xffffff7f816d7413
    0xffffff807ef03bb0 : 0xffffff7f816c6e31
    0xffffff807ef03ca0 : 0xffffff7f816e3c05
    0xffffff807ef03ce0 : 0xffffff7f816c5257
    0xffffff807ef03d10 : 0xffffff7f80c9a832
    0xffffff807ef03d50 : 0xffffff7f8174d4f0
    0xffffff807ef03da0 : 0xffffff7f8174f692
    0xffffff807ef03de0 : 0xffffff7f8174f7c4
    0xffffff807ef03e20 : 0xffffff7f80c9e4c5
    0xffffff807ef03e60 : 0xffffff7f80c9e628
    0xffffff807ef03e90 : 0xffffff7f80ca1fd7
    0xffffff807ef03ef0 : 0xffffff800063d4d6
    0xffffff807ef03f30 : 0xffffff800063c250
    0xffffff807ef03f70 : 0xffffff800063c0f4
    0xffffff807ef03fb0 : 0xffffff8000820057
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000->0xffffff7f80cc7fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
             com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f81742000->0xffffff7f8179ffff
                dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
             com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c2000->0xffffff7f81728fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc8000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
    System uptime in nanoseconds: 18633492210750
    last loaded kext at 37211407179: com.lightspeedsystems.kext.LsSaKernel64          2.0.0 (addr 0xffffff7f810cc000, size 147456)
    last unloaded kext at 198602469343: com.apple.driver.AppleUSBTCKeyEventDriver          227.6 (addr 0xffffff7f814fc000, size 8192)
    loaded kexts:
    com.lightspeedsystems.kext.LsSaKernel64          2.0.0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AGPM          100.12.75
    com.apple.driver.X86PlatformShim          5.0.0d8
    com.apple.driver.AppleHDA          2.2.5a5
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AppleMikeyDriver          2.2.5a5
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleIntelHD4000Graphics          7.3.2
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.ApplePolicyControl          3.1.33
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleBacklight          170.2.2
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.AppleIntelFramebufferCapri          7.3.2
    com.apple.driver.AppleSMCPDRC          5.0.0d8
    com.apple.driver.AppleUSBTCButtons          227.6
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
    com.apple.driver.AppleUSBTCKeyboard          227.6
    com.apple.driver.AppleIRController          312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.iokit.SCSITaskUserClient          3.2.1
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCISerialATAPI          2.0.3
    com.apple.iokit.IOAHCIBlockStorage          2.1.0
    com.apple.driver.AppleFWOHCI          4.9.0
    com.apple.driver.AirPort.Brcm4331          561.7.22
    com.apple.driver.AppleSDXC          1.2.2
    com.apple.driver.AppleUSBHub          5.1.0
    com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleAHCIPort          2.3.1
    com.apple.driver.AppleUSBEHCI          5.1.0
    com.apple.driver.AppleUSBXHCI          1.1.0
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.4
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.2.5a5
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.driver.AppleHDAController          2.2.5a5
    com.apple.iokit.IOHDAFamily          2.2.5a5
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleGraphicsControl          3.1.33
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.X86PlatformPlugin          5.1.1d6
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
    com.apple.iokit.IOBluetoothFamily          4.0.8f17
    com.apple.driver.AppleUSBMultitouch          230.5
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.0
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.driver.AppleThunderboltNHI          1.6.0
    com.apple.iokit.IOThunderboltFamily          2.0.3
    com.apple.iokit.IOFireWireFamily          4.4.8
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IOEthernetAVBController          1.0.1b1
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOUSBFamily          5.1.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.8
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    System Profile:
    Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
    Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 7
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52f, 0x14200000 / 1
    Sorry for the huge post.  The lightspeed kext shouldn't be causing problem as we use this program for all mac machines, I also did extensive troubleshooting with it.  I did ask her to stop using the logitech USB device but she said it didn't make a difference, it was a plug and play device, would it still cause this issue without having it plugged in?
    Thanks in advance for the help.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for

  • How to make Row and Column headings bold in 2004s Web template

    Hi! I have created a web template which has 3 queries. I would like to achieve the following 1> Bold the column heading and row headings. 2> Delete the space between the three reports(right now there is some space) 3> Align the columns on top of each

  • "a new version number" for updates

    Hi, in iba2.0 there for updates there is a new field for: "new version number". default is 1.0. it the support it said the number must be higher than in the store. actually I don't see a version number at my book page in the store. however - since it

  • Having Thread trouble

    I am writing a servlet that searches a Directory and gets all of the volume objects it has. I want to take the volume objects and get all of the information about them. I have been able to do this but I want the servlet to be multi-threaded because I

  • JDEdwards and UCM Integration

    Can anyone give me the idea about the jdedwards and oracle UCM integration? Please share the Doc links if you have any?

  • Cursor Problems

    I recently purchased this G4 AGP graphics. The computer arrived with the OS only (no programs) I purchased a new Illustrator 10 program and installed. I then purchased a new Photoshop 7.0 and installed. When installing PS, I registered online and upd