Mouse stopped working from one day to another

hi,
I got following problem:
The mouse cursor isn't moving anymore, although I move the mouse.
Also, Some key-combinations doesn't work anymore (including [ctrl]-[alt]-[backspace] and the sysrq-calls).
Yesterday it worked perfectly, and I didn't change anything!
No changes in the 10-x11-input.fdi, no hal-, dbus- or xorg-server updates.
Sometimes I cannot even switch to the tty's, I have to press [ctrl]-[alt]- [F1] multiple times before it switches.
So, here's my xorg.conf:
http://dpaste.com/51833/
and my /etc/hal/fdi/policy/10-x11-input.fdi:
http://dpaste.com/51835/
BTW: The mouse is not broken, it works on knoppix and gentoo....
So I think this is an hal/xorg error....

Do you have your mouse and keyboard plugged into a USB hub in your screen? If you do this, when you turn off the screen (or it goes into powersave), your mouse and keyboard will be disconnected, and reconnected when it turns back on. This should work fine anyway with hotplugging, but you can never be too sure...

Similar Messages

From one day do another server admin don't connect to the server

I have an Intel XServe with OSX Server 10.4.10.
From one day do another server admin don't connect to the server locally and remotely. The workgroup admin shows not the sharing button. The other services works correct. (FileService, NetBoot, ping etc ...). In the CrashReporter I've only find a crash from dashboardadvisoryd. I don't want restart the server.
I there an other solution?
Thanks Sven

I found the solution in a message three above:
http://discussions.apple.com/thread.jspa?threadID=1184552&tstart=0
With
sudo kill -HUP `ps aux|grep 'servermgrd'|grep -v 'grep'|awk '{print $2;}'`
from the terminal ... and after any minute's later the problem was solved
Sven

How can I transfer work from one computer to another?

How can I transfer work from one computer to another?

Welcome to the forum.
I can think of three basic ways to accomplish what you wish to do:
Use the Project Archiver to archive your Project (and check the box to gather the media files), to an external HDD. Probably the easiest way to do it.
Copy the Project and ALL media files to an external HDD, but be prepared to relink the media files to the Project, as the drive letter (part of the Absolute Path) will have changed.
Edit loosely, and Share to an AV file, which will be Imported into a New Project on that second computer. Or, edit VERY tightly, and do the same. I like the first, as removing, replacing Transitions, etc., can be much more difficult, unless that "tight edit" is 100% done.
Good luck,
Hunt
Message was edited by: Bill Hunt to correct formatting

From one day to another, my MB starts EXTREMELY SLOW

everything seems to work fine, but from one day to the next one my macbook takes a long time to start, is there anything i can do to fix that? i have 2 gigs of ram so i dont think this should happen at least it didnt like 3 days ago, ive used the onyx program to restart everything i could (meaning cache memory vram and that stuff) any other suggestions?
thank you in advance

Hello,
Using Onyx ™ makes your next startup extremely slow because it erases all of the cached files. Your startup speed will not return to normal until 2~3 startups after using Onyx™. Do you have these issues when you don't use Onyx ™?

Going from one day to another

I need help in going from one day to the other without using the wheel. Anyone out there that can help?

I don't believe it's possible without using the wheel. Any keypress you make assumes you want to create a new entry on the day/time slot you currently have selected.
posted by DigitalFrog
WARNING: May contain traces of nuts.

In ear headphones stopped working from one ear?

I've recently purchased a pair of in-ear headphones for my iPhone. About 2 weeks later (now) one side (the right side) has stopped working. Amazingly, that's also where the remote is but it does work, the actual earbud doesn't though. I'm pretty sure it's not a problem with the jack, since this happens with my TV when I plug them in, too. I'm also wondering if I can get it replaced by Apple and what I would need to take to them to get it replaced if so. Thanks, help is appreciated. (:

Just make a Genius Bar appointment at your nearest Apple Store and take the headset in.

Does anyone know why my track pad ,from one day to another stopped tracking when I move it towards something it takes long to move to where I want it to be

I need help please

"Sensitivity": there is no such setting.
The trackpad settings in the MacbookPro are in SystemPreferences/Trackpad.
But this problem is possibly not a setting gone wrong, but you can see that easy enough in the settings applet.
How old is your Macbook? Can you give here what it says in Systeminformation under Power:
click the little apple on the top left while you hold the Alt(option) key, the first entry is SystemInformation, choose it, then click Power in the left column and post here everything on the right that regards to the battery.

How to use the 3 button mouse to swipe from one window to another window

when I use the trackpad in the macbook pro 2010 with 3 fingers, I can easily swipe left or right to another window that I setup one for my home and one for my office work, but I also use a external mouse, keyboard and big display to use the MBP with the lib close, this case how can do this with mouse itself under osx mavericks 10.9.1
thanks.

Hi,
Any data sharing accross views can be achiveved by defining CONTEXT data in COMPONENT CONTROLLER and mapping it to the CONTEXT of all the views. Follow the below steps.
1. Define a CONTEXT NODE in component controller
2. Define same CONTEXT NODE in all the views where this has to be accessed & changed.
3. Go to CONTEXT NODE of each view, right click on the node and choose DEFINE MAPPING.
This is how you map CONTEXT NODE and same can be accessed/changed from any VIEW or even from COMPONENT CONTROLLER. Any change happens at one VIEW will be automatically available in others.
Check the below link for more info regarding same.
[http://help.sap.com/saphelp_nw04s/helpdata/EN/48/444941db42f423e10000000a155106/content.htm]
Regards,
Manne.

How is it possible that my events in calender are not synced correctly on my devices from one day to another?

Yesterday evening I was changing events in my calender of my ipad3, since then the syncing between ipad, iphone and Macs went weird! The changed items of yesterday are only on my ipad but not on the other devices anymore! What did I wrong? I did not change the calenders, just one repeat-event! Please help :-)

Mike blessing wrote:
You mean if I change the password, he will never spy on me again?
There is no way i can answer that, there area a million ways one person can spy on another in this day and age.
However if you were to wipe the phone and set it up as new plus change all your associated Apple passwords to ones your ex can;t guess, then I can say he couldnt 't tracking you through the phone. Wiping and reinitializing it would be the same as getting a new one so I don;t think you need to go through that expense.
However assuming this post is real and you are experiencing the situation you describe you need to contact the authorities. There is no way anyone here can know the true seriousness of the situation and to be giving advice on this issue is wrong. We could be causing you to fell a false sense of safety. Because of that this will be my last post here.
So please do what I recommended to the phone and then seek out the proper help.
good luck
regards

Moving appointments from one day to another in a later month?

I have a bunch of events on my calendar for May that I want to drag-and-drop to days in June. The problem is that while I am in May, I can not also show any of June. The only solution I found is to cut-and-paste, or to double click the event and change the date there. Is there a way to enable me to see both May and June so I can drag-and-drop?
Thanks.

Hello,
Since June 1st is Sunday, if you have iCal set to display Monday as the first day of the week, you can do a two-step drag:
- in May view, drag the event to June 1st
- in June view, drag the event from June 1st to the proper date
It is a bit of a hack, but...

Why did my email password quit working from one day to the next when my computer was off??

Password was working fine on Thursday when computer was turned off. Turned computer on today and password won't work. Why is that?

Have you checked with your email provider?

Problem with drag and drop application windows from one workspace to another

I work with multiple desktops (Spaces) and before I freely dragged the mouse a window from one space to another, now the mouse rests on the edge of space and the application does not become the next space. What am I doing wrong or where this option is set?

After the publication of the problem has disappeared, the window is dragged. Miracle! )

Bluetooth Mouse stops working after software updates

Hello,
I've been using a Bluetooth mouse with my X220 Tablet for several months now. After fiddling with device manager to ensure that the Thinkpad Bluetooth device does not have the "Allow the computer to turn off this device to save power" setting set, things were working perfectly.
However, after running through some windows & Lenovo updates, the mouse now seems to work for a while, but after any idle time, the mouse stops working. Turning the mouse off & back on seems to cause it to reconnect, and it works until the next time it goes idle for 2 minutes.
I've gone through device manager, and made sure both the Bluetooth & USB Root devices are set not to power down (per http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Bluetooth-mouse-stops-working-from-time-to-tim... ), but still no luck.
The software updates applied from the Lenovo System Update tool were:
ThinkPad Power Management Driver: 1.67.04.05
ThinkPad Power Manager: 6.64.4
Lenovo Solution Center: 2.4.002
Intel G1/G2 Display Driver: 9.17.10.3347
Also, some windows updates which don't seem related (mostly security), but I can lookup the list of KB numbers if helpful.
Are there any known issues with the power manager updates that might affect this? If so, what's the best way to revert to the last working version?
Thanks!

Try doing a PRAM reset and see if that helps, also put in new batteries as that may make a difference.
OS X Yosemite: Reset your computer’s PRAM

Images I move from one folder into another are disappearing, at first it was occurring immediately if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location.

Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?

Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

Mouse stopped working from one day to another

Similar Messages

Maybe you are looking for