Mouse stops working after being left alone

Question

My issue is: If I don't use my mouse for an extended period of time (especially if afk, happenes when at the computer too though) it stops working and I need to replug it for it to work, the time seems to range from 2 seconds to half an hour or more without any real logic to it.
Expected behavior: the mouse should remain functional even after not being used for a variable amount of time.
Originally I suspected it was because it uses 5V 100mA but after examining my previous mouse and the USB spec I can conclude that is not the case as this behavior was not expressed with my previous mouse, further this behavior remains even after I move it from the usb hub to one of the ports on the computer.
A quick $lsusb later and I have the device id
Bus 002 Device 085: ID 056a:00dd Wacom Co., Ltd Bamboo Pen (CTL-470)
Bus 002 Device 048: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller
Bus 002 Device 047: ID 0421:026a Nokia Mobile Phones N97 (mass storage)
Bus 002 Device 026: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 002 Device 095: ID 1b1a:7004
Bus 002 Device 092: ID 413c:2003 Dell Computer Corp. Keyboard
Bus 002 Device 072: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 002 Device 071: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 04f2:b1d6 Chicony Electronics Co., Ltd CNF9055 Toshiba Webcam
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
1b1a:7004 seems to be an unknown device (seeing that it works fine on windows and mac based computers I can conclude that the hardware isn't faulty)
Perhaps linux doesn't realize it requires 100mA? Or maybe it isn't getting 12MB/s speed but instead only 1.5?
Very well, #udevadm can tell me this.
looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1.2':
KERNELS=="2-1.1.1.2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{devpath}=="1.1.1.2"
ATTRS{idVendor}=="1b1a"
ATTRS{speed}=="12"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="8"
ATTRS{busnum}=="2"
ATTRS{devnum}=="95"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="100mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="0"
ATTRS{bcdDevice}=="0110"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{version}==" 1.10"
ATTRS{urbnum}=="11120"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}==" USB Mouse "
ATTRS{removable}=="fixed"
ATTRS{idProduct}=="7004"
ATTRS{bDeviceClass}=="00"
ATTRS{product}==" USB Mouse "
Well... apparently my theories are all incorrect, the LEDs stop pulsing when the mouse 'dies' and just remain on so at least I can conclude it doesn't power down.
Any assistance would be greatly appreciated.

Answer 1

$ sudo echo -1 >/sys/module/usbcore/parameters/autosuspend
bash: /sys/module/usbcore/parameters/autosuspend: Permission denied
ditto for $sudo for i in /sys/bus/usb/devices/*/power/autosuspend; do echo -1 > $i; done
#for i in /sys/bus/usb/devices/*/power/autosuspend; do echo -1 > $i; done
does execute without error but it changes nothing.
the buttons do not wake the mouse which is why this is such a problem (well, the dpi button and LMB, RMB and MMB don't, there are two other buttons but I can't recall if I tested them)
Physically unplugging and re-inserting the mouse and keyboard fixes the problem regardless of any changes. The thing is that I would like it to be working from boot, and not having to replug them.
Obviously not working on my end though seeing I have to replug it every time it dies.
thanks for linking the post though (I had already read it but going through it a second time at least proves it wasn't just a one off that I didn't do it right or something but that it actually doesn't work. Odd that root doesn't have permission to do some things though, seeing that root should have ultimate power).