Mouse to switch primary and seconds buttons not working on Forms 6i
Hi All,
I am facing problem while i am using Form6i Application on web.
We have a couple users that they are left hand. When they set their mouse to switch primary and seconds buttons under windows setup.
The menus do not worked on Form6i Application, unless the user uses the keyboard.
On Form10g it's working fine but on Form6i it's not working.
Thanks in Advance.
Uzair
Hi Craig and thanks for replying,
The way I created the roll was under my username, not the administrator user. The first time I was not able to create a roll from my user, but I did this to be able to do it: GRANT CREATE ROLL TO <MY USERNAME>
The way I enabled the the Roles on y menu was as follows:
1) I open menu using Forms 6i.
2) Right click on my menu name and choose Property Palette.
3) Under Menu Security, I choose Use Security and select "Yes".
4) Under Module Roles, I typed a name for that role.
5) I go to SQL and create the new Role under my username giving the role the same name I gave it on Forms. This is how I created: Create role <Role Name>
6) Then I just assign that role to my user, like this: Grant <Rolename> to <username>
Hope this helps!!
Thanks again in advance!!
Similar Messages
-
my ipod 4G power button and volume button not working after updated to ios6.
i also experience wifi issue. my ipod can't detect any wifi signal.
so deppresing!
what should i do?
i can't put my ipod to sleep, can't adjust volume, can't shut off.
should i update to ios 6.1?
HELPTry:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
When iOS 6.1 comes out I would update. -
Cancel and Exit button not working
Dear Experts,
<u>Cancel and Exit button not working</u>
I am calling a screen from inside a report program
using SET SCREEN 9000.
2 of the date fields(start date end date)
on this screen are Mandatory.
I am not able to Come out of this screen 9000 using
CANCEL or EXIT button
without giving a date entry in both of
Mandatory fields (start date end date).
Can someone help me with a solution?
Appreciate your valuable help;
Points assured
Thanks,
Aby JacobHi..
To avoid this problem you have to use AT EXIT-COMMAND Module.
1. In the GUI Status for both EXIT and CANCEL buttons assign the Function type E (Exit Command)
2. In the PAI of the Screen Call this module.
MODULE EXIT_SCREEN AT EXIT COMMAND.
3. Now check the OK_CODE or Sy-ucomm in this module to Leave the Screen
MODULE EXIT_SCREEN INPUT.
CASE OK_CODE.
WHEN 'EXIT' .
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
ENDCASE.
ENDMODULE.
This will surely work.
<b>reward if Helpful.</b> -
Power button and home button not working and dont have warranty
power button and home button not working and dont have warranty
I had the same problem went to a store and paid $80 to have them replace the cable and it works fine now.
-
My loudspeaker and lock button not working and my warranty has expired!!! I do not know what to do!!!! HELP PLEASE!!
Those are hardware issues. You can try all of the software troubleshooting if you want. Restart, reset, restore from backup, restore as new. If that does not work, then your only option is to pay someone for something. The decision is up to you, but I've provided the options.
-
IPhone home and lock buttons not working at all?
I got my iPhone 4 in October 2010. Since then I have accidentally dropped it on the floor and the back cracked, and in April 2011 I accidentally dropped it in a tub of paint. A bit silly, I know, but I managed to get all of the paint off quite easily and it was fine. However, at the end of last year, the home button started to malfunction and get stuck and just generally not work. In the past few weeks I've noticed I get trouble with it at least once a day and have to sit and press it until it works. Then, today, just out of nowhere, the lock/power button at the top of my phone just stopped working, it's stuck. I don't really have a way to wake my phone now unless I press the home button until it works, and I can't lock it anymore. I don't know whether it would be anything to do with the paint, considering it happened a year ago. Is there anything I can do to get it working again or do I need to take it to Apple?
Thank you very much.Ok this Might work
1- Try rubbing your home button with alchohol ( or perfume ) in a circular motion for about 20 seconds
2 - do the same to ur power button ( from left to right and repeat ) for about the same duration
3- press and hold both your power and home button at the same time ..
... If this doesnt work try it one more time
If it doesnt respond after the second time i'm afraid u'll have to take it to an apple care center :(
Wish u luck -
IPod touch 5th gen. Home button stuck and power button not working! Please help!
I have an iPod 5th Generation and the home button is jammed down! It felt sticky earlier but now it's stuck down. I used it when the home button wasn't working and had to use my notifications to change from app to app (as I didn't know about assistive touch). I turned it off, but now the power button is no longer responsive! The button isn't stuck, but it doesn't work anymore. It was working fine before, but now it won't respond. Please help!
Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
Hi there,
Thanks for reaching out to the community.
Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
Best of luck! -
Backup and restore buttons not working
Hi,
Any button in my backup and restore centre with a shield next to it (for UAC) is not working. Identical to this thread:
https://social.technet.microsoft.com/Forums/windows/en-US/6a138e65-2834-41ac-bd40-c2344e20b824/backup-and-restore-panel-buttons-not-working
A fair way down that page, Lokesh replies but I don't have any of the software that he mentions in his post. Is anyone able to help?Hi,
According to the Lokesh's reply, this problem is probably caused by 3rd plugin in Windows Explorer Shell. UAC dialog couldn't be prompt correctly.
To resolve this problem, you can try to use ShellExViewer instead to make troubleshoot, please follow the content of the link below for more details:
https://social.technet.microsoft.com/Forums/windows/en-US/5353106e-5b19-4a26-8446-72bedf40b169/rightclick-context-menu-in-desktop-appearing-slow-win-81?forum=w8itprogeneral
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
HT202159 mountain lion download interrupted and resume button not working
mountain lion download interrupted and resume button not working
From the App Store menu bar top of your screen, click Store > Check for Unfinished Downloads
Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.
You may need to temporarily disable anti virus software to download apps from the App Store including Mountain Lion.
Make sure your Mac qualifies to run Mountain Lion > Apple - Upgrade your Mac to OS X Mountain Lion. -
8530 Track Pad and E buttone not working, also lines in photos.
Device info
Your carrier: SPRINT
Model info and OS version: Curve 8530 5.0 Bundle 1675 (just upgraded)
Apps and free space
File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 106575952
Did a battery pull fix your issue?: No
Apps installed and their version if possible. (Go to Settings, then Options, then applications): None
BT device model/version (you will have to look at the BT device): None
Scroll pad works on and off, will not work on some menus. E key will work sometimes, usualt types an upper case E and not a lower case, will not type 2 E's in a row. Works ok when typing a 2. There were some other buttons giving issues a while ago and then it all went away and now this just started again out of nowhere. I tried backing up / wiping the phone, upgraded to the latest software and it is still giving me issues. The phone has never been exposed to any sort of moisture, I don't even use it in the rain.
Another issue, possibly related, possibly not is that I get 1 vertical line and 1 horizontal line in my photos I take. This started out happening sometimes and not other times but now it is constant.
Thanks for any help / suggestions you can give.Is the phone still under warranty? If so, I'd contact Sprint as this sounds like its probably a hardware issue (especially if updating the software didn't help). If the phone isn't under warranty any more, let us know and we'll see if there is anything we can come up with that could help.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution! -
Keyboard, touchpad and assist button not working
Hello, I have a touchscreen VAIO laptop on which the keyboard, touchpad and assist button are not working. The touckscreen keyboard works, and if a plug in a bluetooth USB mouse it works too. Te problem as I said before is with the touchpad and physical keyboard, which don't work even in the BIOS inicialization. I tried the assist button but it doesn't work neither. Instead of accessing VAIO Care, it turns the computer on. I also tried to restore the system and update drives, but with no success. The problem started with some bubbles on the screen that freezed the computer. I restarted it and only the keyboard was working (the light under it was on) but the display was off. Then I restarted it again, and again and now only the dispaly is on (I can access Windows 8 via touchscreen), and the rest of it is off (not working, leds off, etc).
Hi Damares,
Thank you for considering Sony Community!
I am sorry to hear your issues but it seems that you are experience a combination of hardware and software issues. First, the Assist button should work when you press it. Try to press Assist button again while the unit is off (just in case you were trying to use it while the unit is off).
Power cycle the unit - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds.
Test again the unit. If this won't push through then we highly suggest to visit Sony's Authorized Service Center in your area.
For further assistance, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
Best regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"
-
BB Curve slow to react and some buttons not working
This are my Blackberry Curve 8520 specs:
Signal: -65dBm
Battery: 100%
File Free: 106342756 Bytes
V5.0.0.681 (bundle 1168, Platform 5.2.0.67)
Carrier: TIGO
Apps installed:
Dropbox
Bible
Evernote
Free Chat for Facebook
Google Maps
Google Sync
Handylogs Money
iLock 2.1
Laterdude
Memory Booster
Multialarm
Navita Translator
Role Call Reminders Lite
Now my problem:
My blackberry fall directly faced down, the blackberry turn off. Then I pressed the restart button and nothing. so I remove the battery and then put it back again. The BB started, but It got hang up at the screen you could see the little clock working but never start properly so I pull off the battery again and waited like 5 minutes then I put it back.
Now my BB starts but when I left it idle and some sms arrives or call or simply if I want to use it, I have to maintain pressed any button like 7 seconds if not my BB doesnt react. I can press repetedly buttons to make it work but nothing works and the only way to make it work is maintain any button pressed.
After that BB works normally!, but now the "del" button doesnt work, I tried to remove the battery several times but every time gets the same result.
I made a hard reset twice and restored my contacts only, then I tried to make the BB work normally and guess what........ nothing!!!!!!!
so I have those two Big problems
Please anyone with a great idea? or any recomendation to get this thing working again!!!I am not using "Clear Recent History". I have read about the session data, as you mentioned it when others had this issue. However, I'm not sure what I'm suppose to do with that. Does it mean the App Tab isn't working as promoted? I got the impression they should load with my Home Page every time I start Firefox and that's what I wanted. I don't want it to load every tab I had open during my last session FireFox. Just the App Tabs and Home Page. That's how it's described in the "What is App Tab" page.
If I select When starting FireFox... "Load Home Page & Last Session Tabs", it works, but it also loads all the other junk I have open. I don't want all of that to load every time I start, but I also don't want to have to repin all those tabs every time I start. That's annoying. I tried selecting "Use Current Pages" as my Home Page, when I had it set exactly as I wanted it, but it opened all my App Tabs as App Tabs and regular tabs, along with my Home Page. Not quite what I had in mind.
Am I just misunderstanding how it works? What's the point if you can't just keep the App Tabs and Home page on start up and not all the other junk you have open on close?
Thanks for answering so quickly! -
Primary Key radio button not working
Hello
I created a toplink probject on my MacOS X 10.4.6 machine using JDev 10.3.1.0.4 SU2.
It works well, but when I click the toplink map, then I click my definition under structure to the right.
I have a view with:
Associated table: <popup>
Primary keys:
<radio button list>
Sequencing:
The problem is located at the radio button list of the primary keys, if I click a radio button, the XML description file is updated, but I visualy see nothing, all radio buttons are always not selected.
As a workaround, I click the pk I want, and then I verify the XML file for correct selection.
Hope it will be fixed.
Regards
KuonFound a new workarround.
Changing look from MacOS X to Oracle.
But I hope it will get fixed, MacOS look is better with text anti-aliasing. -
Submit and Reset button not working
Hi, am new in the forum, php, dreamweaver and flash.
i have been working on a website for my client using flash, and i had to create a form
on my contact page that user can use to submit their queries.
i managed to download a step by step code using php. It guided me through everything
but my problem is once i uploaded the website on the server the button submit and reset it not doing it job.
here is the website. www.kulaevent.com
it takes couple second for the contact form to appear.
Please help, pleaseThank you
I have checked the link you gave and i managed to update my form and i uploaded
on the site and it worked.
Thanks again
Maybe you are looking for
-
TUB 166 and OSS Note 1422655 -- Michigan FUTA
We have applied TUB 166 and would like to get the Michigan taxes straightened out since the changes are retroactive to 1/1/2009. I found OSS note 1422655 and it says 'Before apply the instructions of this note, it is necessary to configure unemploym
-
I have a SQL Report that may or may not have data. If there is no data I would like to hide the portlett altogether. Currently, it returns something like "No Data Found". I can use a UNION to return a different message, but then that would always sho
-
I had to do a system restore, now when I click on Firefox a window comes up saying couldn't load xpcom. How do I fix this? I'm on my iPad can't open my computer, please help, thank you Cheryl
-
My iphone won't scroll and I have to double tap
-
Why i cant view package body ?
hi all, i cant view package body in my pl/sql. pls help. tks.