Mouse turns off after waking up
I just bought a new keayboard for a PowerMac G4 I was given. I am using a standard 2 button optical mouse plugged into one of the usb ports on the keyboard.
After the computer comes back from sleep, the mouse will not work unitl I unplug it and re-plug it back in. I can use the same usb port. Any ideas why this might be happening and what I can do about it?
Also, the mouse seems to perform fine if it plugged into the usb port on the back of the computer. I plugged it into the keyboard so I could use a USB hub as well.
The original Apple Pro mouse cable frays in the chord just as it exits the mouse, over time, and shorts out causing symtoms similar to yours. You can't see the fray by looking at it thru the exterior covering. This can happen to third party mice over time too.
Mine did it. I plugged it into a different port, so the chord exited the mouse in a different direction, and had very few issues after that. Once I got over my frugalness (cheapness!) I bought a new one. Eventually it got to where I couldn't even work for more then a few minutes without a freeze.
So, try a known good mouse to see if that's the problem.
Don Archibald, a Level 5 here, said the USB ports on the keyboard (for you desktop users) are underpowered and can cause this problem also if the mouse is plugged in there. This can even fry the keyboard sometimes (happened to him). Try plugging your mouse into a port on your monitor or tower (you said this worked for you!).
If you still have trouble post back!
Cheers!
DALE
Similar Messages
-
Yoga 13 display does not Turn off after idle
I have the computer set to the balanced power option, and the disaplay is set to turn off after 5 minutes on battery and 10 minutes when plugged in. Unfortunately the screen never turns off.
Anyone know how to fix this problem ?hi tmpst,
Welcome to the Lenovo Forums.
If a wireless device (mouse, keyboard, etc.) is plugged to the computer, the display, screen saver or sleep function might not work. If this is your case, try to:
1. Remove your wireless device (might include a usb dongle)
2. Apply the Moving mouse causes laptop to exit sleep mode fix
If you have Power DVD installed, apply http://support.microsoft.com/kb/913405
Let me know your findings.
Cheers.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Can not turn on the monitor on Satellite after dispaly turns off after 10min
hi..
I have a problem with my laptop..
when the display turns off after 10 minutes , it doesn't turn on again !!
i move the mouse, trying to type on the keyboard, but it doesn't work..
to turn the display on again i should close the lid to hibernate and open it again!!
i hope that you will help me @_@ !Hello
Check please http://support.microsoft.com/kb/917332/en-us
To correct the behavior please download and apply the patch (KB917332) which could be found in the detailed resolution below. I hope it will help. -
Yoga display turns off after 1 minute
I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?
This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.
-
My screen darkens after 1 minute and then turn off after 3 minutes (energy saver). Now, all of a sudden, after it shuts down it comes right on???
thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work
-
Screen turns off after a few minutes and needs to be closed then opened
hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
thanks
rossIs there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
Cheers,
Daniel -
for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?
If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
http://concierge.apple.com/reservation/us/en/ -
MacBook turns off after the startup bong when trying to restart
Greetings,
When I try to restart my MacBook it turns off after the startup bong.
ThanksHave you tried resetting the System Management Controller? That is a good first step for power related issues such as this.
Best of luck. -
apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes
I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.
-
My ipod shuffle turns off after exactly 30 seconds of play. Already had a similar problem?
Did you see my post above?
Have you tried a different set up earbuds to see if that helps?
What about resetting the Shuffle?
Resetting iPod shuffle
B-rock -
my iphone 4 turn off after appearing message 'temprature high, need to be cool down' after that does not getting turn on by anyhow.
Hello vijaypatel,
Thanks for the question. The following article outlines the temperature warning that you experienced:
iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
http://support.apple.com/kb/HT2101
If the iPhone is no longer powering on, we will need to isolate this issue to determine if it is hardware related.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
- Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
- Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
Learn about LCIs and corrosion.
- Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
- After at least 15 minutes, if:
- The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
- The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
- Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
- If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
- If the display turns on, go to step 4.
- If the display remains black, go to next step.
- Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
- If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks,
Matt M. -
Iphone turns off after a few mn of utilization with the battery full
My iphone 3GS turns off after the battery is fully regenerated. I can only use it a few minutes before it turns off. I have to plug it again to turn it on, and the indicator of charge is around 98 %. The problem does not come from the battery. Has anybody found the same dis-functioning? A solution? Thanks!
More than likely the iPhone has a hardware problem.
If there is an Apple store nearby, make an appointment to have this confirmed. -
10.6: Internet Sharing turns off after restart
I use Internet Sharing on my iMac to share the Ethernet connection from my computer wirelessly to my iPod touch. In Leopard, Internet Sharing would turn off after a restart. Snow Leopard fixed the problem for a while, but now it's acting up again. Any help?
Using MacOS X 10.6.2 I have the same problem.
My network configuration is just the other way around (wireless Internet and Ethernet LAN).
Looking this up in Google first, I came across this older support link of Mac OS X 10.2:
http://support.apple.com/kb/TA21168?viewlocale=en_US
The solution provided there is not really helping though.
However, it appears that this is a recurring issue Apple is struggling already longer with. Hope they straighten that out at one point. -
Iphone suddenly turned off after it was working fine. How can I turn it on again?
Hi Bobgriff43,
If your iPhone will not turn on, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden -
My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?
Try a system reset. It's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
Maybe you are looking for
-
Session Timeout Question in EME
If I login to eManager Web and instead of logging out I just close the browser will I be logged out? Will the license be released? What is the session timeout for this and is it possible to set this value?
-
Setting a default Save as location in pdf printing
When printing a pdf in Adobe Acrobat, is it possible to set the Save as location to defeault to the same location as that of the source document, rather than having to manually navigate to its folder each time?
-
How do I re-check one phone on my account?
-
How can i control(customize) the Tab order? By default Tab order is from left to right on the Form, I need to change this order. Do i have to use focusLost/Gained ? Thx Ali
-
Error installing Photoshop on PC running Windows XP
I have downloaded Photoshop OK onto my iMac. Now trying to download onto my PC but am getting the following Errors (see below). Have tried uninstalling & installing several times. Have also tried the Adobe Creative Suite Cleaner Tool to no effect. A