Mouse wheel only goes up? in Bridge (Photoshop CS4)

I'm experiencing a problem with Bridge (CS4) where the mouse wheel only scrolls upward. Trying to scroll down causes erratic behaviour. If you scroll in normal speed it always returns to the top. If you spin the mouse wheel down fast, Bridge will scroll down some then move back up a little. No problems in any other Adobe product such as Photoshop CS4.
Has anyone duplicated this behaviour?
Any solution?
NOTE: WACOM tablet mouse works correctly.
Regards,
Darv

Same here. When using a Microsoft Wireless Laser Mouse 6000, I can only scroll up (or left in filmstrip view). Using a Logitech mouse scrolling works OK. I have been using the Microsoft Mouse for several years on Windows Vista x86 and the scrolling has been working OK in all applications including Bridge CS4 (and Photoshop CS4, Lightroom 2.6 and so on). It is only when using Bridgde CS4 on Windows 7 x64 that I have problems with the scrolling (again scrolling works OK in Photoshop CS4 x86, Photoshop CS4 x64, Lightroom 2.6 x64 and so on).
Update: I just checked and the scrolling actually works in the side panels. It is only the film strip and in the light table that scrolling is defective.
Seems to be some kind of bug in Bridge CS4 when running on 64-bit Windows?

Similar Messages

Why does my mouse wheel only scroll up in the catalog. It works correctly in every other program.

When in a catalog folder and showing a single picture, the mouse wheel only scrolls up, not down. This behavior is not seen in any program other than elements. If more than one line of pictures is showing in the window, it works fine, both up and down scrolling.

Hi All,
Please refer to the following article and do the needful:
Photoshop Elements Help | Photoshop Elements hotfix 13.1.1
It should solve the scrolling issue.
Thanks,
Anwesha

Mouse wheel events are being caught by Photoshop document

I'm using CSXSWindowedApplication.
If you create any document in Photoshop, then zoom into it, so it takes more space than visible screen area and then open a CS Extension panel - the mouse wheel event is being caught by Photoshop and when you're rolling it, Photoshop moves document up and down, instead. mouseWheel events don't reach neither WindowedApplication nor any control inside of it.
This only happens in Photoshop.
Are there any workarounds?
Thank you!

Interesting. I've' not played with mouse wheel events. I'll have a look at it.
Thanks
Bob

Why Does Premiere Pro CS4 Import Only 10 Seconds Of Layered Photoshop CS4 .psd??

Why Does Premiere Pro CS4 Import Only 10 Seconds Of Layered Photoshop CS4 .psd??
I have a 24 second clip I layered in Ps and when I import the psd into Pr THE SEQUENCE IS ALWAYS ONLY 10 SECONDS!
How can I change this? Why does this happen? I really need to know as soon as possible. I have a video project due this Wednesday (granted it's for an AV class where I'm just learning Pr. But I can learn VERY FAST!)
Thanks for your help.
--OSXniCKels

Just in case I wasn't clear in my last line "just Click-drag on the Tail of your .PSD to set the desired Duration," once you have Imported your .PSD (as Footage), just drag it to the Timeline, Click-drag on the right-hand margin (the Tail) and stretch out its Duration, as is required.
Now, if you Imported as a Sequence, open that Sequence's Timeline, and do the same.
I normally will set my Edit>Preferences>Still Duration to about what I think will be applicable, do my Import, and then with the Info Panel handy, just alter the Duration to suit.
Good luck,
Hunt
PS - Welcome to the forum.

Mod Wheel Only Goes Down To 45

This is a very recent problem. My modulation wheel now only wants to go down to around 45. It will go all the way up to 127, and hit it around 3/4 of the way to the top. I have checked all the keyboard settings I know to check. It shows it only going form 45 to 127 in both Logic and on the keyboard display. It is a Kurzweil PC1X. I am sure that this is keyboard related, but I can't find a good Kurzweil place to ask questions, and thought you guys might be able to help me. Also, I thought there might be a way to define the mod wheel parameters in Logic. The mod wheel is very important to me, because I normaly use it to control velocity for Vienna Instruments.
Oh, and as a side question. How do I find out what the different midi controllers are called on my kepboard? If, for example, I were to use a seperete controller to control velocity, and wanted to redraw some things after performance in the Matrix editor, how would I find out which midi controller it is from the list of options? Thanks very much.
Colin Thomson

I can't help with the Kurzweil because I don't know it.
About controllers, usually in good keyboards, like yours, you can customize them choosing which MIDI message they send; they are described in the keyboard manual together with a MIDI implementation table.
If you want to see in Logic what happens when you use a controller open the Event List (under the Window menu).
cheers
rob

My mouse wheel only brings the page closer up in Flash Player, doesn't make it smaller when using Firefox Browser. I uninstalled and reinstalled Flash Player. What do I need to do ? It works fine with IE 8.

My internet is Internet Satelite 1.5 MB. speed. Everything else with the Flash Player seems to work fine except the wheel. But the mouse wheel works fine everywhere else.

So what Flash Player version do you have currently installed?
BadsantaKQ wrote:
some flash websites load and work properly, whereas other ones don't.
What exactly do you see on sites that don't work?

Logitech G400 mouse wheel only works in one direction

Hi All,
I just purchased a MacBook Pro Retina 15" version and I plugged my almost new Logitech G400 into it and I notice that the scroll wheel on the mouse only seems to work in one direction. I've installed the logitech gaming drivers, but there aren't arent scrolling options in there, so I suspect that it's Mac OS that's to blame here.
By default it was only allowing me to scroll to the top of the page by scrolling the wheel down. I've since reversed this, so that when I scroll down, I move down the page - the problem being if I scroll to far I then have to use the trackpad. As stated, I have tested the mouse as working in a Windows 7 machine, so I suspect this is a problem caused by the OS.
Has anyone experienced this issue and if so, how did you fix it?
Thanks,
Craig

Doing what they did in the video is fine - up to a point. After a while however the clogging gets so bad the method shown won't work anymore. Dampening the cloth helps somewhat, but not for long.
Mine finally got in this condition so I took it to my local Apple Store. The Genius there cleaned it with a surgical swab (the type the nurse wipes your arm with when about to stick a hypodermic needle in it). Did a good job too. The Genius had a supply of about 200 with him and let me have a few.
I have found that this is the only lasting way to clean the roller. But it doesn't stay clean forever of course and also I eventually ran out of the gratis swabs.
Since I ran out of these swabs my mouse has gummed up all over again. In fact it has been like this for so long now that I have abandoned it in favour of the Magic Mouse. I only use it now when booted into Safe Mode or from a Boot CD as the Magic Mouse doesn't work in these situations.
Yes, I know the Magic Mouse is a tad more expensive than a box of surgical swabs, but have you tried going into your local Chemists and asking for these surgical swabs lately?. The idiots won't sell you any because they assume that you are a junky and only want them for injecting yourself! I kid you not.

MOD wheel only goes up to MIDI value 86

Hi all,
My MOD Wheel, controlling modulation data in Logic pro X, only gives MIDI values from 0-86.
Even when the wheel is at the top, the data never goes above 86.
Would anyone know how to get it to output values from 0-127?
Thanks
Josh

You can also download this MIDI Monitor to check and make sure your keyboard output is working correctly.
http://www.snoize.com/MIDIMonitor/

D7000 raw files not seen in my iMac OS 10.7.5; Bridge and Photoshop CS4 Extended

Please help!!! I just bought a Nikon D7000 and my iMac OS 10.7.5 does not recognize it, I cannot see the D7000 on the Desktop, Bridge, Photoshop CS4 Extended, etc Please assist.

ACR 6.x only works with Photoshop CS5, not CS4. The latest Camera Raw you can install into Photoshop CS4 is 5.7.
You have two choices, one free, one not:
1. Use the latest version of the free downloadable Adobe DNG converter to convert all your raw D7000 images to .DNG files each time you shoot, then open the .DNG files into Photoshop CS4, which it knows how to read with Camera Raw 5.x.
2. Upgrade to Photoshop CS6, which will give you maximum convenience and integration to be able to just open the D7000 raw .NEF files directly through Camera Raw.
-Noel

Photoshop CS4 shuts down only when creating new project.

I've had CS4 web premium since nov. 08 and everything worked fine until the most recent update from adobe.
I ONLY have this problem with Photoshop cs4: when creating a new project after selecting the aspects (name, width, hight, etc.) when you press ok it shuts down and no error is given as to why it shut down, it just does.
opening documents that had been created prior to the last update isn't a problem, I'm able to do everything Photoshop cs4 has to offer.
I can also open a file started in another program and edit them in PS CS4 (ie: fireworks , or AI).
but for some reason if I want to start a project in photoshop it just shuts down, never used to happen. any clues? any one else have a similar problem and know how to fix this?
running on windows XP

I think you mean a new docuement - Photoshop doesn't have "projects".
Photoshop shouldn't "shut down" - there should be some message about a crash.
And the most likely causes at that point are OpenGL (try turning it off in prefs) and your default printer driver (try changing default printers).

Photoshop CS4 no longer runs on iMac

I had a fan issue on my iMac and after speaking with two different agents the last one had me move some files to the trash. Now Photoshop CS4 will no longer run. Operating system: OS10.7.5. Can't reinstall from the disks. Anyone know how to fix this?

This doesn't sound like bad preferences - more like missing files (possibly in Application Support).
Your best bet is going to be reinstalling Photoshop CS4, then reapplying the updates.
Note - it would have been very easy to check Activity Monitor and see if a process was cauing the CPU activity/heat. If there was no busy process causing extra CPU or GPU activity, then the most likely explanation would be dust buildup around the heatsinks and fans inside the machine. But randomly removing application files and support files to diagnose a fan running too often - that is not professional, by any means.

Will Photoshop CS4 work with Snow Leopard?

I just updated my MacBook to snow leopard. I also just found out that I am going to be required Photoshop CS4 on my laptop this semester for a couple of my classes. I was looking at the system requirements for CS4 and it says Mac OS X v10.4.11–10.5.4, snow leopard is 10.6.
Will CS4 be able to run on my computer?

See Adobe's official information on 10.6 here.
Matt

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R.

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

TDFields you will want to ensure the 7z and exe file are in the same folder/directory. You can find more details at Find a download link on Adobe.com.

Mouse wheel scrolls only downwards (win7, configur...

The mouse scroll wheel scrolls only downwards on OVI views, even when trying to scroll upwards. This happens in windows 7 when the mouse wheel is configured to scroll one page at a time. There seems to be a Qt bug about this (https://bugreports.qt.nokia.com/browse/QTBUG-12284), so please bump it.

Thanks for reporting this. I'll forward this information.

Mouse wheel only goes up? in Bridge (Photoshop CS4)

Similar Messages

Maybe you are looking for