Mouse wheel scroll speed is too slow

I have the problem in this(https://support.mozilla.org/en-US/questions/948356) thread and this(https://support.mozilla.org/en-US/questions/948356#answer-422916) answer was closest, but the change reverts after restarting Firefox, even though the settings stay applied. I can switch it back to the old setting, then switch it back to the answer, and that fixes it, but it still reverts after restarting Firefox.
Still getting it in Firefox v24.0.

No reply given here provides a valid solution!
The key parameter here is '''mousewheel.min_line_scroll_amount'''
One should set it to some high value. I've set it to 100 (I use smooth scrolling OFF).
Source:
http://askubuntu.com/questions/27270/increasing-scroll-speed

Similar Messages

Wheel scrolling speed [SOLVED]

Is there any way to change mouse wheel scrolling speed in firefox? It scrolls every 3 lines by default, i would like to change to like 5-6 lines which would make wheel scrolling much faster. Is it possible?
I'm using XFCE 4.2.1
EDIT: Ok, I solved it. To anyone interested here is the tip:
Enter about:config in the firefox address bar.
In the filter, enter: mousewheel.withnokey
Change mousewheel.withnokey.sysnumlines to false
Change mousewheel.withnokey.numlines to a higher number, say 5
reload firefox
done.

TheOne wrote:
sherlock wrote:Found a solution for Microsoft Mouse.
After loading Windows one will need to unplug / plug again mouse receiver. And everything is fine and in normal speed.
That fixed it, that is all nice and good.
Anyone know how to fix this in a "better way", dont want to have to keep unpluggin the mouse everytime I boot.
It also works to me!
I am using 3.11.6-1-ARCH with awesome v3.5.2 on slim 1.3.6, and i have both windows7 and Linux on my laptop.
My mice is Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Also I find every time i restart my linux, the mice is too fast until i cover off my laptop then open it, or just plug the receiver again...

In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll. Is there a way to adjust this?

In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll. Is there a way to adjust this? This is the way I scrolled for MIDI editing on Logic 9

Hi cris2121, assuming you're using a mouse from apple, go to >System Preferences<
it's here where one can configure a mouse device.
Additionally you can also configure Scrubbing in Logic: "When in scrub mode, you can slowly move the playhead in the Tracks Window and the Audio (and optional MIDI) will be played back. The playback speed depends on how fast you move the Playhead in either direction."
Have a nice day!

[X300] Mouse Wheel Scroll Lines Setting does not stick

I often use an external mouse (no additional driver needed). After every reboot, the setting "Mouse Wheel Scroll Lines" in Control-Panel -> Mouse -> Wheel is reset to 1 (I am using Vista). This is really annoying because it slows down scrolling extremely.
Does anyone have the same problem?
I think its caused somehow by the ALPS touchpad driver (The X300 has a really bad one, the Synaptics pads built in previous Thinkpads were WAY BETTER).

wfaz wrote:
VPN User ...
Have you made any progress? I am having no luck getting the X300 touchpad to scroll with MANY applications: Photoshop, Illustrator, Access to mention some. I use Windows XP - another user has complained that with Vista he does not getting scrolling to work with iTunes, Live Search. Plus, wheel events are not handled by the Remote Desktop, so anytime you are tunneling, you don't get touchpad scrolling. I have been expecting a new UltraNav driver for months - but nothing yet. I think I have tried every combination of touchpad and trackpoint settings possible, but maybe you know something I don't.
WFaz
I am sorry but the problem you describe is a completely different one. Personally, I don' t care for these few applications, especially iTunes and further rubbish. Fact is, the quality Ultranav2 Driver is much much worse compared to the Ultranav1 which uses a Synaptic touchpad. Responsiveness, accuracy, supported applications, bugs are much worse with the Ultranav2 used in X300.
AFAIK adding applications to support the touchpad needs just adding them to some list in registry or what. But as I said, I never cared for that. The problem that the driver resets mouse settings when using it, I find much more disturbing.

Issue with Adobe Muse parallax jitters with mouse wheel scrolling vertically.

Hi all,
I'm learning Adobe Muse for the first time to put together a wedding website (http://mattandsangeeta.businesscatalyst.com/index.html), so bear with me as I'm a novice at the software - though I do have the most up version, Adobe Muse CC 2014.
So far, it's been an excellent platform, and for the most part the site functions incredibly well. However, one key flaw I've noticed in it is the parallax scrolling speed when using a mouse.
The parallax portion of the site jitters badly, and while we've found a few improvements for the issue (the best was making sure there was nothing that had scrolling set to "0"), I'm still at a loss for how to get smooth scrolling transition speeds. Every forum Adobe has seems to be showcasing the features, and not troubleshooting this particular issue. A lot of posts are similar, but none seem to be resolved. I've noticed that other parallax pages are smoother with the mouse wheel scrolling down, so I'm hoping it's just an issue with Muse that has a setting or snippet of code that can remedy the issue.
What makes me realize it's the mouse wheel scrolling, and not the site itself, is because whenever I access the site on my surface pro tablet, the parallax runs buttery smooth with touch control or even trackpad control. Same when you click the middle scroll button and pan down. Without any mouse wheel scrolling, it looks great! But with a mouse wheel, it hiccups constantly and ruins the effect.
So, is there any way to smooth out the steps that the mouse wheel scrolling seems to be causing?
Thanks in advance,
Matt

Thanks for the link, however that specific thread was one of the ones I referenced in my original post.
In the beginning of the thread, it's clear that coding can fix the issue, though it's not recommended. More telling is that the response you referenced indicates that the issue is claimed to have been either fixed or mitigated In updated releases of Muse.
As you pointed out earlier, however, Firefox displays the parallax a little better than Chrome, and much better than Internet Explorer. I'm assuming that Adobe Muse Creative Cloud 2014 release attempted to this issue.
So my question kind of remains: am I missing a setting that would make the scrolling more smooth, or is it simply just a limitation of the browser / software / parallax combination?
Thanks again for the responses.

Mouse wheel scroll event ON CHANGE?

Colleagues,
Very simple question:
How to get mouse wheel scrolling event on change? Without polling?
Is Acquire Input Data.vi the only way to get it?
Thank you in advance,
Andrey.

Hi Andrey,
i think it's not build in. I wrote some years ago the attched vi's, because i also miss this feature. These vi's use the "acquire input data.vi", but it only polls if a control has registered for it.
Hope it helps.
Mike
Attachments:
ScrollEvent_LV71.zip ‏461 KB

After updating to 4.3 I can't connect to wi-fi because the "internet speeds are too slow". How much speed does this require?

After updating to 4.3 I can't connect to wi-fi because the "Internet speeds are too slow". So what speed does it need?

I called tech support and I got the same **** canned response, backup and reset to factory settings. Yeah right! Everything was fine until Verizon shoved the software update down my throat. I finally unchecked the box in Wi-Fi settings for auto network switch. However, I still get the "Your Internet connection is unstable" warning no matter what Wi-Fi connection I hit.
In a related story, I received a new or refurbished phone as my original SIII had AC/charging connection issues. I called probably three times to attempt to back up my data, went into two stores in attempts to have them transfer the information over, and all were too incompetent and inept to assist me. Only when talking to someone about this Wi-Fi issue, did someone actually know how to back up everything. Of course by this time, I had to send the new phone back because Verizon charged me $400 before I got everything squared away. What a colossal waste of my time!

I am U.S. iPhone 4S user traveling in China. Data speed is too slow to be usable. Verizon says that it because iPhone 4S connects to strongest signal even if slowest. Any work arounds for this design flaw?

I am U.S. iPhone 4S owner traveling in China. Data speed is too slow to be usable. Verizon says that is because iPhone 4S connects to strongest signal, even if slowest (virtually non-existent) data network. Does anyone know how to work around this design flaw?

I spent 2 months in china with my old iphone 3gs. Both China Unicomm and China Mobile were accessible through my US phone. (for you other users, yes my phone bill was sky high, but it's a small price to pay when you get instant access to your wife while you are gone... and to be able to use the google translate app). I had a GSM phone (obviously) and had the ability to choose what carrier I wanted my phone to connect to (the same thing was available when I was in italy as well).
it was under
general-> network> then there was a new field (that does not normally show up when in the US) that listed the available networks to connect to. my phone always attempted china unicomm first, and switched to china mobile only when unicomm was unavailible.
but if wjosten is correct (and i imagine he is), cdma phones may not be able to choose what network to connect to.

Fix mouse wheel scrolling in Grid view in Windows

Fix mouse wheel scrolling in Grip view in Windows so it functions more smoothely

This is a bug.
I don't think it is rendering problem, because LR renders in background. (Though, it would be nice to have quicker rendering)
I think it is a locks in DB bottleneck when LR gets draft images from database. This code should be revised:
- DB requests shouldn't be performed on paint thread
- current locks should be worked out.

Mouse scrolling speed is too fast

It appears that iPhoto doesn't honor the mouse scrolling speed in system prefs. Scrolling with the mouse is useless for me because the slightest up or down movement scrolls several pictures at a time. I have a Logitech MX Revolution... I don't know if the mighty mouse behaves any differently. Is anyone else annoyed by this?

Nevermind... I discovered the Logitech prefs allow me to fine tune the scroll wheel.

Adobe Reader slow when mouse wheel scrolling in Full Screen mode.

When I scroll a pdf in normal mode, its fine, but when I try to view in Full Screen mode, the scrolling is much more slower and it takes more rolls of the mouse wheel to get to the next page. Does anyone know how to improve the scrolling function of the Adobe Reader when viewing a document in full screen mode?

Good that you solved your problem. There will probably be other users that need to solve the same problem and your solution might help many others. The support here comes from users helping other users.

Mouse wheel scroll question

Hello to all, i want to make the following question:
I have a canvas which has a vertical scroll bar, inside this
canvas there is a textarea control which has a vertical scroll bar
too. That i want to make is:
when the user put the mouse cursor on to the textarea and use
the mouse wheel i want to make scrolling the canvas and not the
textarea.
any help will be appreciated.
thanks in advance

Thanks for the replies. The solution to my question is this:
package
import flash.events.MouseEvent;
import mx.controls.TextArea;
public class newTextArea extends TextArea
public function newTextArea()
super();
override protected function createChildren():void
super.createChildren();
textField.mouseWheelEnabled = false;
private var scrollAnterior:Number=-1;
private var direccionScroll:Number=0;
override protected function
mouseWheelHandler(event:MouseEvent):void
var dirScroll:int = event.delta <= 0 ? 1 : -1;
if (verticalScrollPosition==scrollAnterior &&
direccionScroll==dirScroll)
return;
scrollAnterior=verticalScrollPosition;
direccionScroll=dirScroll;
super.mouseWheelHandler(event);
it works fine, but now i want to make the same with the
canvas, but seems is not possible override mouseWheelHandler event
in it. Any help or suggestion ?
Thanks in advance

Since I updated to 6, my mouse wheel scrolling has become erratic, and, depending of the text size on the web page, either moves only a few lines each turn or moves several pages instead of one page as it did before on every tab. how do I fix this?

Is this a glitch or is it something to do with compatibilty?

yes, it is still happening, though I've gotten better at ignoring it.
my touchpad, i think, is an elan ps/2 port smartpad and my mouse is a microsoft basic optical mouse v2, both componants are working correctly and have the latest driver update installed.
The difference between img 1 and 2 is one scroll wheel turn down. In image 3 I have decreased the view using control - (minus) and in image 4 I have scrolled down one turn of the wheel. you can see that instead of a full page turn, like between img1 and 2, it only moves about 2/3's of the screen down. As every tab seems to have a different text size, the amount of scroll turn changes between tabs, sometimes varying as much as several pages each scroll turn.
One thing I have noticed, is that the vertical scrolling speed on my mouse settings changes the amount the pages moves when turning the wheel. This only seems to change when in firefox. changing this while using word has no effect on the page movement in word. Increasing the vertical scrolling speed will make the scroll turn move further.
I have adjusted the scroll settings in options, and no adjustment of settings, (autoscrolling on/off, smooth scrolling on/off in and combinations of off/on) has made this error stop occurring. I have checked for malware etc, no issues. This happened from the instant I upgraded to FF6, so I think there is a corrolation there.

How do make the mouse wheel scroll in my Flex app/component instead of the browser?

Let's say I have a DataGrid or Tree or List component which
has hundreds of rows. When I place my mouse over the component and
scroll the mouse wheel, I notice that [most of the time] it scrolls
the component a little, then starts scrolling the browser window. I
want it to only scroll the component until it reaches the end of
the rows. Any thoughts?

I have confronted the same issue.
Was anybody able to solve it?
I think mx.contorols.TextArea seems to do well.

NOTHING will allow me to mouse wheel scroll through fonts in CS6

OMG, I am about to have a coronary trying to find fonts! I have looked on this forum for an answer that works and cannot find anything thus far. First, WHY is it necessary for CS6 font list in the Character Pallet to take up 1/2 of my screen?! Second, do i REALLY have to click the little arrows at the top and bottom of the font list to scroll through fonts, ONE.BY.ONE? Typing the first letter does not work either, it takes me to say the "D" fonts but when i click the drop down arrow to see my list of "D's", it shows a list from the top, not the D section. I REALLY hope I am missing something here, because seriously, this is totally unusable.
ETA: Going to the TYPE>FONT menu at the top does not scroll either and Photoshop CS6 works beautifully...
ETA (again): i CAN scroll through the menu on the top (under the FILE-EDIT-etc menus), but there is no font preview (and it is selected as med in preferences)

Thank you for the reply. System is a fairly new Windows 7, 64 bit, plenty of RAM, hard drive space, i5 dual core processor. To have this issue in Illustrator only and not in Photoshop seems less likely a software conflict (just guessing)? I attached screen shots.
Character Pallet drop down (mouse wheel, keyboard arrows, typing a letter key...all do nothing) Only way to navigate is by hitting the little arrows on the top/bottom of the drop down. And no scroll bar?
Top Menu Drop Down - scrolls, hit a letter key and works, arrow keys work. Could use this permanently, but there is no font preview..
All of what you said works on your system, is how I would expect it to be programmed. Partially making sure this is not the way it was designed, and hoping to find a fix for why its not working correctly.
Main programs installed:
Firefox
MS Office 2007
quickbooks
CS3 Design suite (I JUST upgraded to CS6 and have kept it there for a backup...probably can uninstall now if that could be an issue)
Thank you for any advice and if you would like to upload the video, that would be great.

Mouse wheel scroll speed is too slow

Similar Messages

Maybe you are looking for