Mouse won't work after upgrade

Hi all,
I upgraded my mac pro 1,1 to lion this afternoon, and my mouse stopped working. I spoke with a very nice woman from support who tried to help. I unplugged the system. I reset the pram. I changed the settings in system prefs. Nothing helped. All the buttons on the mouse act as if it is the primary. Even if I switch the buttons in prefs, they still act as primary. Any suggestions?
Thanks,
Steve

Joe,
Thanks for posting the thread about the mouse. I did search, and had no luck. The solution in the thread did the trick. Comment, and I'll give you points (if you care about such things.).
Thanks!

Similar Messages

  • ICloud email won't work after upgrade

    iCloud email won't work after upgrade to Mountain Lion.  Says pop 3 server is timing out. Solutions?

    I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
    My problem is TWO FOLD.
    The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
    Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
    There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

  • Mail won't work after upgrade to 3.0

    I cannot get my Mail program to work after upgrading to 3.0. It starts, searched for new mail, then quits. I cannot get or send new mail. The program does not operate. Suggestions, please?

    I get the exact same thing. The status just keeps showing "Connecting..." and it never seems to connect. Oddly enough, I just updated to the new OS on my iMac at home and immediately after, I couldn't connect to mail from the computer. I had to manually download a component of the update and once I did that, mail worked just fine. Probably just an odd coincidence having nothing to do with the mail issues on the iPhone but I thought I'd mention it.

  • Itunes won't work after upgrading to Mac os x 10.7

    How can i fix itunes, it won't open after upgrading to Mac OX lion??

    Downloaded and reinstalled. Still crashed instantly after trying to open or create a document. Below, from Crash Report:
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000044
    Crashed Thread: 7
    Thread 7 crashed with X86 Thread State (32-bit):
    eax: 0xb0427d48 ebx: 0xb0427c38 ecx: 0xb0427b38 edx: 0xb0427b3c
    edi: 0x00000009 esi: 0x00000000 ebp: 0xb0427b18 esp: 0xb0427ae0
    ss: 0x0000001f efl: 0x00010283 eip: 0x94bc9f4b cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
    cr2: 0x00000044
    Will attempt your suggestion.

  • HT204350 scanner won't work after upgrade

    scanner won't work after upgrade

    Hey srohall,
    Thanks for the question. I understand that you are experiencing issues with your scanner after updating to OS X Mavericks. To troubleshoot this issue, we’ll want to follow the same troubleshooting steps for printers:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Follow these steps until the issue is addressed:
    1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    5. Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    1. Reset the printing system, then add the printer again.
    2. If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    3. Contact the printer vendor or visit their website for further assistance.
    Thanks,
    Matt M.

  • My itunes store, app center, safari and mail won't work after upgrade

    I am very dissapointed in the new maverick upgrade. My app center, itune store, safari, and me mail won't work with the new upgrade. I called the help desk and they had me uninstall and re install the upgrade. he said i should have everything backed up cuz I will lose everything, but nothing was lost. It worked for a day, but now it doesn't work at all. it just gives me the hourglass circle symbol and finally times out. A couple of times  my computer gave me an error code that i wasn't connected to the internet, even though I could use chrome no problem. Another error code I got was that I wasn't signed in, but I am. Any suggestions?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Mouse won't work after computer wakes

    I have both the original iMac keyboard and mouse (wired) and also a (wired) Microsoft USB Keyboard and mouse set. It doesn't matter which set I'm using as this happens with both. Whenever the computer sleeps and is then required, the mouse won't function. It stays in the centre of the screen.
    With the MS Kb and mouse combo I use an additional 4-port USB hub. I have the latest MS software (6.0 for Mac) installed for this set. When needed after awakening, the mouse just sits. No activity whatsoever. The only way to activate it is to unplug the USB connection from its port on the hub. Now it will work fine.
    Using the Mac set, the Mac mouse is connected into the Mac keyboard USB port. There is no USB hub in this scenario. However, the same thing happens. I have to disconnect the mouse from the Mac keyboard and reconnect it.
    Any idea what is happening here? When I first started the Mac or MS sets there was no problem. Could it be that one of the Mac software updates is causing a glitch?
    The reason I use the MS keyboard and mouse (MS Natural Ergonomic Keyboard V1.0 and MS IntelliMouse Explorer 4.0) is because I prefer the keyboard layout. I have difficulty with the straight-across keyboards.
    Looking forward to your responses. Thanks in advance.
    Lynn
    Intel Core Duo   Mac OS X (10.4.7)   1 GB DDR2 SDRAM, Netgear Router

    Here is a Knowledge Base article with things to consider;
    Intel-based Mac: USB Keyboard or mouse stops responding
    Also is the hub externally powered? Or does it draw power through the USB? Non-powered hubs have caused issues.

  • Mouse wheel stop working after upgrade

    Hi. After upgrading my Leopard to 10.5.8 the mouse wheel stop scrolling window content, like web pages. I'd open the mouse control panel and there is a zooming feauture. It's working like this: moving wheel back makes a fast zoom, and moving ahead makes a slow zoom. Both directions make more zoom (slow and fast) and there is no going back but deactivating before desktop reach my nose.
    So I beleive the system is getting wrong the resources of my mouse. Where can I setup this?
    Oh, it's a Microsoft Wireless mouse.

    Yes! I'd install the software pack of the mouse for Mac OS X that adds a control panel at Sistem Preferences and I take control - and the wheel came back!
    But it's not easy finding it in Microsoft.com (in my case: .br). You got to start by hardware products and follow support links, system, etc..
    Thank you for the tip!

  • Sd connector won't work after upgrading to ios8.1

    after upgrading to iOS 8.1 my official lightening SD connector won't work, when I plug it in it says " cannot use device sub storage: the connected device is not supported"'is anyone else having this problem if so how to fix it, my sd connector worked fine when I was on ios7.

    Same here, I have an iPhone 5s and it is really frustrating, all news app, twitter, whatsapp have stopped to Push any notification unless my device is awake !! only emails are fine - once I awake the iPhone, dozens of notifications pops up which make it really hard and annoying to read and follow !!!!
    Please advise!!
    Noting that i have tried to reset settings, backup and restore, install all updates....etc nothing worked !!

  • HP C7280 Solution Center won't work after upgrading to Windows 7

    I was running Vista and connected to the C7280 both wired and wireless. Last month or so has been wireless with no issues.
    I upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says "An unsupported operation was attempted" that pops up twice, then I get an error that says "An invalid argument was encountered".
    Then a pop up window gives some steps to try to fix the problem.
    I downloaded and installed driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which didn't work.
    I then removed the printer from hardware, and uninstalled the Solution Center software,
    Re-installed driver  PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 driver package and
    installed dot4patch_reboot.exe,
    shut the printer down, unplugged it for a few minutes, rebooted the computer, and
    the same errors occur.
    The driver is a year old, and I can't find a newer version.
    Released:
    2009-10-20
    Version:
    13.1.0
    The patch is a few months newer but it didnt help either.
    » HP Print Software Patch When Upgrading Vista to Windows 7
    2009-12-06 , Version:1.0, 1.22M
    This Windows 7 patch fixes some printer functionality after upgrading Vista to Windows 7. For networked printers, please go to www.hp.com for more support information.
    Any help is appreciated.
    This question was solved.
    View Solution.

    Finally got this problem fixed. No Thanks to HP Support
    I installed the software for an HP Photosmart Premium C410 series and it corrected whatever problems I had with the HP Solution Center scanning  problems in the C7280 printer software.
    Go Figure ......

  • G4 AGP Graphics - 2nd display won't work after upgrading from os 10.2

    I have a desktop G4 AGP Graphics with two displays. When I was running os 9-10.2, the second display worked fine, but after upgrading the os (now running 10.4), the second display still works, but has turned gray and pixelated.
    When I take a screen shot, the picture shows that both displays appear clear (and in color).
    Am I missing something? Thanks in advance for any suggestions

    so do you have 2 different video cards driving two different monitors? or is it One video card with 2 displays?
    the info you listed isnt very detailed but it does tell me you got an ATI video card with 16MB VRAM.
    I assume that thats the Stock AGP 2x graphics card that came the The PowerMac G4 AGP graphics model.
    why is your display set to 8bit depth? a stock 2x AGP card with 16MB VRAM should be able to support 16bit or 24bit depth even at 1024 x 768 res.
    the info says also Core image not support as well as Quartz Extreme no supported. Which is significant because it could be why the 2nd Monitor doesnt display properly with Tiger.
    under 10.2 there were less stringent requirements for driving video.
    OSX 10.4 Tiger is much more advanced OS and has higher graphics cards requirements now.
    I could be wrong, but I think you may need a newer video card that supports Quartz Extreme and Core image.
    hopefully someone else will run by this topic and offer some insight aside from my own.

  • Epson stylus cx 3800 won't work after upgrade to osx 10.9

    I installed OS X 10.9 on my MacBook Pro and now my printer Epson Stylus CX 3800 won't work. I uninstalled the printer and tried to reinstall with original epson software but computer won't download it. Perfectly good printer worked yesterday but not today. Any suggestions would be appreciated.

    Hi ,
    I had the same problem , But i fixed the issue by updating patch . Hope this link can help you for all version
    as this has patches and explained
    http://news.idg.no/cw/art.cfm?id=297D2650-EC09-00A1-048BD74750266743

  • Keyboard and Mouse don't work after upgrade

    Hi, about one week ago, i've made a system wide upgrade and after reboot my keyboard and mouse stopped working. My hard disk is encrypted and without keyboard i remain at the prompt which asks my password to unlock the encrypted partitions. So i don't even arrive to login manager. I tried all the solutions i could find but none of them worked for me.  I saw similar posts on the forum and i'm sorry if i'm posting it in wrong place.
    Here is my  Xorg.0.log file, it seems like because of hotplugging, xorg disables mouse and keyboard but i couldn't disable hotplugging with the given methods like adding flag to the /etc/X11/xorg.conf file:
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    EndSection
    I 've installed/deleted xf86-input-keyboard/mouse and reinstalled xf86-input-evdev etc and it didn't work.
    I tried to downgrade to different versions of kernel, i didn't work.
    There are "00-keyboard.conf"   "10-evdev.conf"      "10-quirks.conf"     "50-synaptics.conf"    files under  /etc/X11/xorg.conf.d
    So i don't know what to do else, i hope someone can help me.

    ewaller wrote:
    When you boot to the Ubuntu system, before you chroot, look at the output of lsmod and note the modules in use.  In particular, I am interested in modules that contain 'lpc',  So try lsmod | grep lpc
    lpc_ich 21163 0
    Post the module names that that finds here.  Also, look in your initrd for modules for the LPC bus driver.  It does not exist in mine.
    ./usr/lib/modules
    ./usr/lib/modules/3.15.8-1-ARCH
    ./usr/lib/modules/3.15.8-1-ARCH/modules.alias.bin
    ./usr/lib/modules/3.15.8-1-ARCH/modules.builtin.bin
    ./usr/lib/modules/3.15.8-1-ARCH/modules.devname
    ./usr/lib/modules/3.15.8-1-ARCH/modules.dep.bin
    ./usr/lib/modules/3.15.8-1-ARCH/kernel
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/padlock-aes.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd256.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish_common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/tcrypt.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-mod.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/aes-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/af_alg.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/padlock-sha.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha512_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ccp.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/authenc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ctr.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-aesni-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sr_mod.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha256-ssse3.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/glue_helper.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/md4.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rng-core.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_raid6_recov.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_tx.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serio.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/seqiv.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-x86_64-3way.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ccp-crypto.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crypto_user.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/usb-common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-region-hash.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crypto_null.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ansi_cprng.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast5_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/hmac.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast_common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/deflate.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cdrom.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cmac.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rsa.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast5-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast6_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/usb-storage.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/i8042.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/xts.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-avx2.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/scsi_mod.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/seed.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ehci-hcd.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/algif_skcipher.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/public_key.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/xor.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/zlib.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc-t10dif.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/authencesn.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/mbcache.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/vmac.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha256_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sd_mod.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_pq.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/mpi.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/usbcore.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-crypt.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ehci-pci.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-log.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ecb.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/raid6_pq.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc16.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/algif_hash.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32c_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-sse2-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif_common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-snapshot.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ccm.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/salsa20_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd128.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha1_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/xhci-hcd.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-aesni-avx2.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4_compress.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/raid6test.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/oid_registry.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/salsa20-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha512-ssse3.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd160.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/gf128mul.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4hc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/gcm.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cts.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/xcbc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_xor.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-mirror.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/x509_key_parser.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/asn1_decoder.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif-pclmul.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/aesni-intel.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/usbhid.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lrw.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ext4.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-bufio.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/arc4.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/michael_mic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/libahci.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/uas.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/jbd2.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/tea.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32c-intel.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast6-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha1-ssse3.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/pcrypt.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/hid.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/fcrypt.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/des_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/libps2.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/pcbc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/tgr192.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cbc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ablk_helper.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/asymmetric_keys.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd320.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/anubis.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/khazad.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/libata.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ghash-clmulni-intel.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_memcpy.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish_common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ahci.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/wp512.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4hc_compress.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32-pclmul.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/atkbd.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ghash-generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/md5.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cryptd.ko
    ./usr/lib/modules/3.15.8-1-ARCH/modules.symbols.bin
    But, my keyboard and touchpad don't exist in the ISA bus address space.  Things that used to live on the 1980's vintage ISA bus (like serial UARTS and ancient keyboard controllers) are now serviced by the serial LPC bus.  I think you don't have that driver available in the initrd preboot environment
    Sorry, i'm not good at these things, so which driver i should install if it's the case? (By the way, i added  atkbd to the MODULES= and "earlymodules=atkbd modules-load=atkbd" to the kernel parameters, but i didn't make any change.)
    Pse wrote:
    Note that you shouldn't do this as a permanent solution, but just to get through the bootloader issue for now, manually edit /boot/grub/grub.cfg and change the relevant lines to point to the LTS kernel (in other words, grub-mkconfig should NOT fail, but that's not your biggest problem right now). This way the entry that pointed to the common kernel should now point to the LTS one.
    You can find the LTS kernel files in /boot; the names should give them away. Remember to change both the kernel and initrd lines in grub.cfg.
    In fact, i also have done as you told(by changing lines to the lts) and read about the error that grub-mkconfig gives me. It says it's ok, error is not important it should work properly. So i have some problem with my bootloader. I can't see the boot option anyway. Problem must be about UEFI because i remember that i had booting problems also when i first installed arch to my computer. I see all lts and lts.img files under /boot directory but somehow don't see as boot option.
    Anyway, thanks a lot for all your help, maybe i do something wrong, i can't solve the problen. I'm going to reinstall my system, because i don't have time anymore. I hope at least this post would be useful for somebody else.

  • Itunes won't work after upgrade

    ok, i'm an idiot and upgraded to itunes 6.0. before today everything was working great, then after the upgrade itunes won't open anymore. any help would be great!!!

    I am having the same problem - if anyone knows what the problem is I would appreciate it.

  • Printer won't work after upgrade

    Hi.  I have an HP Deskjet 460 portable printer.  I have upgraded to Lion and now the printer is not recognised.  When I inserted the original installation CD, it stated that Power PC applications are no longer supported.  Any way I can get this printer to work with my iMac and Lion?  Simple language explanation if there is one please.  Thank you.

    The simple answer is that the printer drivers (or the intaller for them) won't run on Lion.
    You might be able to find a generic printer driver that will still allow you to print, but your best bet is to query the HP forums, where I'm sure if a workaround for Deskjets has been found, you'll find it there.

Maybe you are looking for