Mouseover event - need sound to stop

Hey forum - if you reply please go easy on me as I'm in Flash
deep enough just to panic.
I've created an animation with image fade in and sound that
plays when you hit CTRL-Enter. I exported as SWF and reimpoted into
new FLASH document and applied this movie to the mousoever button
event.
The works except the sound doesn't. So I reimported the sound
and added it separately to the mousover button block (you know when
you put the button in edit mode).
However when I export the movie and mouseover everything
works, but when I move the mouse off the sound continues to play
(not loop - it just finishes it's 9 second duration). When I move
my mouse off, the visual part stops, but the sound does not. I want
the sound to stop too.
So...
1) Why doesn't the sound work in my reimported SWF? Is that
the problem?
2) Or...is there a way to just make it stop in the new
document when the mouse leaves?
THANKS so much. If someone needs me to upload the FLA I'd be
happy to.

check that your sound is an streaming sound. that's your best
hope with that setup. otherwise, you can add a stopAllSounds()
function to your rollout handler.

Similar Messages

  • Sound has stopped working on hp dv6 windows 7

    i was using my hp dv6 laptop which runs on windows 7, when the sound just stopped suddenly. i unplugged my speaker and when i did it the sound coming through the speaker was like a clicking, as if the sound is lagging or something. ive tried everything i can think of including searching for driver updates of which there arent any because im up to date. so i tried rolling back and that didnt work so updated again and still doesnt work..please help me. ive only had the laptop for a couple of weeks and it hasnt been abused or anything. i just dont understand it at all and dont want to pay a fortune for some1 to fix it, please help!

    Is the external speakers are working fine, and internal speakers has cracking sound - i suspect it to be speaker hardware related issue. you may need to report this ti HO technical support and have the unit serviced if needed.
    If none or the speakers work or just external does not work, you can troubleshoot issues related to internal/external audio switching from the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01884922
    hope it helps.
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • Sound will stop working out of no where?

    So my phone will be fine all day, and then all of a sudden the sound will stop working? i cant hear the little clicking when i type, text tones wont come in, the lock button doesnt make that shutting noise. Sometimes it happens after i plug it into my computer. I have tried blowing into the headphone jack, but that didnt work? I updated it, i restared it... i dont get it?? please help me!!!

    Basics from the manual are restart, reset, restore from backup, restore as new device.  If you've been through ALL of these steps and the problem persists, then you'll need to bring your phone to Apple for evaluation.

  • DV9999us Sound Hardware stopped working for no reason

    This is my first time ever posting to a thread, so if I do a poor job explaining myself, I apologize.
    I have an hp dv 9999US laptop which months ago I upgraded to Win7-64 Pro.
    I had no problems until a few weeks ago, where all of a sudden one day my sound card stopped responding. The soft touch keys above the keyboard became unresponsive and there was a red "x" next to the speaker icon in the taskbar. If I click on it, I get a "not responding/wait/close" dialogue box. And under Device manager I have no listing for a "Sound, video, and game controllers." Sometimes Device manager shows a device listed as "Co-Processor" with a yellow exclamation after it, but when I try to install a driver for it windows is unable to find one.
    Also, when I try and install the driver for my sound card ( when it's not detected in DM) i get a code 10 error that the hardware is not responsive, or something to that effect.
    However, sometimes everything works fine. The soft touch keys are responsive, my conexant sound card displays in Device manager, and the volume settings in the taskbar are functional.
    I have NO idea what is causing this, but I've tried just about every driver I can find that's compatible with my integrated sound card.
    I've done some forum reading, and one thing people suggest is to make sure that the Microsoft UAA bus driver, but I'm a little hesitant to start installing random drivers without knowing what they'll do.
    Any advice would be greatly appreciated, and any additional information you need will be almost instantly provided.
    Thank you in advance
    Mike

    Try a smple reset:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release(ignore the slide to power off).

  • After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

    After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

    alisportshots wrote:
    I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup.  I re-tried to do an icloud backup and it again told me that  "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup:  never".  Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
    For your iCloud backup, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.
    If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer.  You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup.  Then try again.

  • HT1533 my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in

    my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?

    OS X Mountain Lion: If you can’t hear sound from your speakers
    Read the "If you’re trying to listen through external speakers" section.

  • Satellite C650 sound has stopped working

    I've had my laptop for about 6months and have had no problems with the sound until now.
    I have recently done a windows update and a few hours after my sound has stopped working completely.
    I have updated the driver (Conexant Cx20671 smart audio hd) after that failed i un-installed and reinstalled the driver off the toshiba downloads, after restarting again no sound.
    When i have media player on, the sound mixer recognizes there is something playing but there is no sound coming out the speakers
    _*please can someone help!!!*_

    Ok, this means that the sound driver is OK.
    Please go to the control panel -> sound -> Playback tab
    Here you have to check if the speakers are set as default device.
    Furthermore mark the speakers and click on settings button.
    There you can also check the volume level.

  • Need sound drivers for a Pavillion dv8309us running Windows 7 Enterprise 64-Bit OS

    Need sound drivers for a Pavillion dv8309us running Windows 7 Enterprise 64-Bit OS. I'm getting "no audio output device is installed" error after trying various different drivers. Sometimes the driver will install and I'll reboot, but to no avail I end up with the same error and a red X over the speaker in the system tray. I've tried Realtek drivers and Conexant drivers from HP. When I run Windows upgrade advisor it recognizes the problem, but Microsoft doesn't offer a compatible driver. At this point I'm very desperate considering everything else works fine and I don't want to go back too XP Media Center. If there is anything you can do to help, it would be greatly appreciated. Thank you

    I guess this one isn't even 64 bit but it is the one on HP's site:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46818-1&cc=us&dlc=en&lc=en&...
    I never tried to force a driver but I think it can be done.  I seeing that in some threads.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • Sound randomly stops and starts

    Hello,
    Over 2 days, as I watch Netflix, or listen to music on other apps, my sound randomly stops and starts.  I have no control of it.  I do not have to touch my ipod when this happens, it does this on its own.  On for 20 min, off for 5 min, on for 5, off for 2, on for 1 min, off for 15 min.  It ossolates randomly through time.
    I hard reboot, but this works or does not work (for a while).  Any ideas?

    Hello,
    Over 2 days, as I watch Netflix, or listen to music on other apps, my sound randomly stops and starts.  I have no control of it.  I do not have to touch my ipod when this happens, it does this on its own.  On for 20 min, off for 5 min, on for 5, off for 2, on for 1 min, off for 15 min.  It ossolates randomly through time.
    I hard reboot, but this works or does not work (for a while).  Any ideas?

  • Getting one sound to stop and another to start on button press?

    I've searched on this topic with several keywords to no
    avail.
    I have a sound playing (1.wav). I would like that sound to
    stop playing and another (2.wav) to start when a button is pressed.
    How do I do this?
    So far I can either I can have both sounds playing, or
    neither (stopallsounds) when it's clicked; but I would like to stop
    1.wav and start 2.wav and can't figure it out. Help!

    How are you using sounds in your movie? Exported to frame 1
    from the library (linkage)?
    see this:
    http://www.kennybellew.com/tutorial/
    --> **Adobe Certified Expert**
    --> www.mudbubble.com
    --> www.keyframer.com
    dcrawford wrote:
    > I've searched on this topic with several keywords to no
    avail.
    >
    > I have a sound playing (1.wav). I would like that sound
    to stop playing and
    > another (2.wav) to start when a button is pressed. How
    do I do this?
    >
    > So far I can either I can have both sounds playing, or
    neither (stopallsounds)
    > when it's clicked; but I would like to stop 1.wav and
    start 2.wav and can't
    > figure it out. Help!
    >

  • How to resume sound after stopping !!

    hi,
    hoping to fine an answer of how to resume the sound after
    stoping
    for example, when i'm using stopAllsounds(); AS
    now sounds stopped
    and i wanna play it again and resume
    !!!

    that's not the best way to use sound in flash.
    it's more flexible and there are less complications if you
    remove that sound from the timeline, right click on it in the
    library, click linkage and assign it a linkage id. then create a
    sound instance:
    var s:Sound = new Sound(this);
    s.attachSound("yourlinkageid");
    // you can then use:
    s.start(); // to start your sound
    s.stop(); // to stop your sound
    // and, in fact, you can use all the sound methods and
    properties. check the flash help files.

  • My iPad sound just stopped working

    My iPad sound just stopped working. How can I fix that?

    Have you tried restarting your iPad?  Press and Hold the Power Button and Home Button for 10-15 seconds until you see the Apple Logo on the screen, and then when you see that, you can release both buttons and wait for the iPad to finish booting up.  Once it comes back up try your sound again

  • Audigy SE sound randomly stop

    So I got this card and installed it and the drivers and everything worked swimmingly. Then, all of a sudden, my sound just stops working. Seriously - just stopped. I immediately checked to see if i muted anything or any of that jazz, and nothing was muted. I ran the diagnostics test and and said everything was fine! I un-installed and re-installed the drivers - didn't help. I "repaired" the drivers - nada. Then during one of my reboots I got the blue screen of death! Cool. I restarted again and windows successfully loaded so i decided to disable the Sound Blaster card and go back to my onboard sound - just to make sure THAT, atleast, works. It worked fine, and so i decided to enable sound blaster - disable onboard - and reinstall the drivers. And that didn't work.
    I've contacted tech support but apparently that takes a hot 24 hours and I'd like to return this card TODAY if it's defecti've...

    $ Did you get a solution on this issue, I'm having the same, even formated/reimaged from XP to SEVEN, and it worked at the beggining of the installation, it has stopped working just now. The weird thing is that it sounds perfectly in my linux install :angry: ... I only use windows for sound/related task, I'm a musician.

  • Ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

    ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    If within warranty (yours is since the warranty is one year) and not abused, Apple will exchange it at no cost.

  • Sound randomly stops working in Windows 8

    I have a new HP PC and the sound randomly stops working.  When the sound stops, it stops in all applications:  iTunes, Web Browser, etc.
    PC DETAILS:
    HP Omni 27 all-in-one desktop
    Windows 8 Pro
    In Device Manager, under Sound, this is what I have:
    - AVerMedia H334 MiniCard Hybrid ATSC/QAM
    - Bluetooth Audio Device
    - IDT High Definition Audio CODEC
    I just set up this new pc this week and I have run all the windows  and drivers updates so everything is up to date.
    When I boot up the pc, the sound works fine for a while and then randomly stops working.  For example, if I play music in iTunes 11, the latest version, it may play for 1 minute or it may play for 10 minutes and then it just randomly stops playing sound and the sound will not come back until I reboot and the same thing happens all over again.
    I have searched this online and I found quite a few people posting similar sound issues with Windows 8, but I have not found a fix for this problem yet.  Any help would be greatly appreciated.

    Warlock57 wrote:
    online troubleshooter shows it as enabled & not installed.
    I do not understand that; if it's not installed, it cannot possibly be enabled.
    Make sure ActiveX Filtering is disabled.

Maybe you are looking for