Mousepad not responding Pavilion dm4

Yesterday evening I woke my computer up only to find that my mousepad no longer worked. I figured it was some glitch like the many others I have found already on this laptop (Sound buttons not wanting to work correctly, mute led light not wanting to come on, etc.) And was hoping to restart and fix the problem. Today, after restarting, my mouse pad still does not work and I, apparently, am not the only one having this problem.
My Specs:
HP Pavilion dm4-2070us
Windows 7 Home Prem OA
I have tried updating the driver (It said that the version that was linked to was the exact same as on my harddrive) and I have also tried updating BIOS with the same result. The mousepad IS NOT turned off. If it is the light no longer works on it as well and it is stuck in off mode. The mousepad is not showing up in control panel no matter what I do.
I'm getting tired of all the problems I have had so far out of this laptop since I've only had it since the middle of August. My friend told me that HP was much better than Dell so I went with her instead what my gut told me. I had been bragging to everyone how wonderful this computer was but now I feel like I should go back and apologize to all my friends. Please say this is an easy fix and I'm overlooking something quite obvious. I'd hate to completely turn my back on HP for a stupid laptop.
This question was solved.
View Solution.

As of right now I have resolved the issue. If anyone has a problem similar to mine, before you send it in, maybe you can try what I did. Last night I let my computer die completely then took the battery out for a few seconds. After that I plugged it in and let it charge a bit (Maybe 30 minutes?) before trying to start it up and try the mousepad again. It's working just fine now, the scoll and zoom in/out even seem to work a bit better now.

Similar Messages

Pavilion dm4-1160 US Touch pad not responding fully.

Hi Guys.
My new HP Pavilion dm4-1160 US model touch pad not working fully . Its scrolling power got completely slow .It responds very late and its scroll up and scroll down not responding at all and even its image enlarge in and out feature not responding .
Reply me urgently with the every possible solutions .
Urgent Help required .

Hi,
First, download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50819.exe
Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
When this has completed, restart the notebook.
When windows has fully reloaded, open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Internal Microphone not working on Pavilion dm4 Laptop

I have an IDT High Definition Audion CODEC internal microphone on a Pavilion dm4 laptop.
I was advised by an helpful HP support person to uninstall and re-install drivers and this I have done a couple of times.
Occasionally the microphone works but more often it is still not working from Start up. It is not working today!
I am trying to use Skype.
I have checked that the driver is up to date. ( right click on IDT in Device Manager) and this was confirmed.
I would be very grateful for any other suggestions.
Christopher

Thanks for the suggestion.
I opened the Sound control panel as you suggested and the Internal Mic (IDT) is shown in the list of microphones and has a green tick ( and is already enabled in properties). It is selected as a default device. ( the icon shows a picture of the laptop indicating the microphone on the lid not the picture of the microphone as shown in your clip)
In the Sound control window there is a sound indicator panel to the right of the internal Mic Icon that has a green bar that moves up and down - indicating that the microphone is responding to sound.
However it is still not working in Skype and it is the Internal Mic that is selected as the device here.
Very frustrating as I really would like to Skype. I tried uninstalling and re-installing Skype Version 5.5.0.117 and this has not made any difference.
Any other thoughts?
Christopher

HDMI not being detected on Pavilion dm4

Hello, I have a pavilion dm4-1165dx and for some reason my laptop won't detect the hdmi cable when I have it plugged into a tv. I have done this before and the labtop has connected and I was able to connect my xbox with the same cable so I know it's not that. Also when I open Intel Graphics and Media Control Panel for some reason under the display tab and subsequently under the Monitor/TV settings tab it says Monitors/ TV settings not supported, but I've used this before to connect it to the tv. Thanks for your help

>I have done this before and the labtop has connected
Did it work with the same hdmi cable?
Sometimes it's a cable quality problem.
Have you updated the graphics driver?
*** Say 'Thanks' with Kudos ***

My mousepad is not responding

After leaving my Macbook Pro Retina 13" for a few seconds the mousepad is not responding (pointer on screen is not moving (freezing). The mousepad works again when touching after 15 - 20 seconds, howcome?

Thank you for the followup. Sounds like you did a great bit of troubleshooting! Reinstalling the OS was a perfect way to help determine if the issue was with the OS, now it looks like you may need to reset the SMC on the computer and/or possibly the PRAM. Combined with your other troubleshooting if this is a software issue these steps will resolve it.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
And to reset the PRAM:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information. If issues persist, your Mac's logic board battery (not a portable Mac's rechargeable battery) may need to be replaced. The logic board battery helps retain NVRAM/PRAM settings when your computer is shut down. You can take your Mac to a Mac Genius or Apple Authorized Service Provider to replace the battery on the logic board.
Take care,
Sterling

Re: Pavilion dm4 2070us; Wifi connectivity icon not showing correct status

Hello,
Did this ever get resolved? My laptop is having the same problem. I'm connected to the internet, and even when I go to another house, it still shows as though I'm not connected when I am.
Please let me know if there's a resolution.
Thanks.

Hi @SophiaKight ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dm4-2070us Notebook and having issues with the Wireless for Windows 7. Here is a link for troubleshooting the Wireless connection.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system it has built in Wireless troubleshooting assistance. If you have told your Notebook to connect automatically to your home network unless you tell it to connect to a different Network it will show connected.
You will have to disconnect and reconnect to a different Network.
Let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Hp pavilion dv6 backspace and enter keys are not responding

In my hp pavilion dv6 2158ee system backspace and enter keys are not responding.

Hello pvz,
Please take a look at this document and let me know if the troubleshooting steps help resolve your issue of certain keys not functioning correctly.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP Pavilion dm4-1160us not interfacing with HP Officejet Pro 8500 A e All-in-One Printer A910a

HP Pavilion dm4-1160 us Entertainment Notebook stoped pring with HP Officejet Pro 8500 A e All-in-One Printer A910a
Operating System is Microsoft Windows 7 Home Premium (64bit) Service Pack 1
How do I get the printer working again?

Hello white2012.
It would help knowing how the printer is connected to the computer (USB, Ethernet cable, Wifi).
Is there any error message shown in the computer or in the printer?
Cheers!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

HP Pavilion dm4-3055dx

Ok so yesterday i turned on my laptop, a HP Pavilion dm4-3055dx Entertainment Notebook PC, and I got a disturbing message that a hard drive failure was imminent. I tried to run a check on my hard drive by pressing F2 during start up but every time I've tried my computer freezes for a few seconds then tells me that the check failed. I've read a little about this issue and from what I've found it sounds like I'm going to have to completly replace my hard drive. I honestly don't understand what could have happened because the computer has been stationary for days and the message came out of nowhere.
I guess my main questions are: 1) Is it possible that some connection has simply come loose or is there anything I should try before resorting to replacing the hard drive? and 2) This is my only computer so I won't be able to refer to this board during and after the install. I know most of the software and drivers are available on the HP Support Website but what about my operating system? Is there any way i can download my version of windows (without having to purchase it considering I've already purchased it when I first bought my computer) and maybe transfer it to my smart phone and then back to my computer or put it on a disc or something? And i guess 3) What exactly should I expect after installing a new hard drive? I've done a complete (like to factory condition) reset recently so I'm not really concerned with any personal data but if I can reinstall windows will I be able to use my wifi and access the internet immediately after or will I have to put all my drivers and my browser on a disc to use afterwards? Like what all do I need to save and have available after replacing the hard drive?
I appologize for the length/number of questions I just asked but I'm really clueless about this entire thing and just want to make sure I'm prepared. Thanks for reading and I look foreward to any/all help.
This question was solved.
View Solution.

Did you perhaps make the recovery disks the system prompts you to make when you first turn it on? Assuming not, in your situation it might be best to call HP to order a recovery disk set. Your laptop came with Windows 7 Home Premium 64 bit and we can link you to a place to download a disk image but you would need another computer (working) to burn a DVD or make a bootable thumb drive.
http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325/page-2#post-124821
These are .iso files which need to be burned to a disk using specific software or you can use this Microsoft USB/DVD tool:
http://lifehacker.com/5423747/windows-7-usb-download-tool-lets-you-install-windows-from-a-thumb-driv...
You can also save off your drivers to install so you do have immediate internet access.
Post back if you need more help. If this is "the Answer" please click "Accept as Solution" to help others find it.

Computer freezes up and every operation says "not responding?"

My HP Pavilion windows Vista Home Premium keeps freezing up on me and the windows are frequently "not responding."
It is becoming annoying every time I turn on the computer and it is also running slow. What could be the problem?

Are you still able to move the mouse around? Try opening the task manager and look at your ram and cpu levels when this happens.

HP Pavilion dm4. Windows failed to start. A recent hardware or software change might be the cause

Hi,
I have an HP Pavilion dm4-3114TX running Windows 7.
The laptop went to sleep during a windows update then froze, so I pulled the battery out to restart it. Each time it restarted it kept taking me to a grey screen. I've tried F8, F2, F10, F11, going to advanced settings and no matter what I click on it takes me back to the grey screen with no options (the cusor does move though). It did let me run memory tests though and they seemed to be fine.
I then pulled the internal hard drive out (probably shouldn't of done that) and put it back in. It does the same thing, only this time it's a black screen (cursor moves but is over sized).
I've got file's on there that I do want back, but at the point where I don't care and will wipe it all to factory settings, but unable to even get to those options. I have brought recovery disc's but they don't seem to help either.
Any help would be much appreciated,
Thanks.

Hi @DannyLongLegs ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that while doing a Windows update the computer went to sleep and then froze. You removed the battery to restart it but you only get a grey screen.
You were able to access the diagnostics and test the memory and it was fine. You removed the hard drive and reinstalled it.
Now when you boot up you have a black or blank screen but it is oversized.
There are some recent Windows updates that have been causing some issues.
First I would try to boot into safe mode to remove the most recent updates. Please look for these and remove them if found.
KB2982791, KB2970228, KB2975719 and KB2975331.
Another program that may be causing this issue is "Search Protect" if that is located please remove it also.
Entering Safe Mode (Windows 7)
See which Windows updates are installed ( from window.microsoft.com)
Here is a link to Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot
If the issue is not yet resolved I would do a recovery back to factory. Performing an HP System Recovery (Windows 7)
During the recovery process you will see an option to backup your personal files to prevent loss. As you stated you have files you would like to retrieve, I would do the backup.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
Please let me know if this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

HP Pavilion dm4-1300er and Windows 8.1

HP Pavilion dm4-1300er support Windows 8.1? I instal this OS and my wi-fi doesn't work after that. I tried to install the drivers from the site but they are for Windows 7. When I run the installation wizard begins installing it and then skip, and the process is not completed. The connection icon without the red cross but with an exclamation point and nabpisyu "Limited"

Hi,
Please use following instructions to get missing hardware id's then post back:
http://www.wikihow.com/Find-Hardware-ID
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

USB Thumbdrive causes "Mass Storage Device Not Responding"...

Everytime I connect a thumbdrive to my MBP, I cannot eject it. I always get the "disk in use" message.
When I go into Activity Monitor, I see "Mass Storage Device Not Responding" and it's eating up a lot of system resources.
After a short period of time, the fan will come on full blast, and stay on until I force the program to quit.
The only way I can eject the thumbdrive is to force quit through Activity Monitor.
I've tried multiple thumbdrives on every USB port and I get the same result.
I've searched through the Support site, but haven't found a solution.

Hi @Eman_Gamal
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your USB ports are no longer functioning correctly. When you checked Device Manager under device status you see this message" cannot verify the digital signature for the drivers required for this device".
As they were previously working have you tried rolling back the drive in Device Manager?
Have you ran the HP Support Assistant to acquire any HP updates?
Have you tried using MS Fix it ?
Here is a link to the recommended drivers for your notebook. HP Pavilion dv6-6c45se Entertainment Notebook PC Drivers Please ensure you have all the latest updates installed.
If the above has not helped as it was previously working you could try a restore back to a known good date.
Using Microsoft System Restore (Windows 7)
Lastly you could do a recover back to factory.
Performing an HP system recovery (Windows 7)
There is an opportunity during the recovery to backup your personal files to prevent data loss. Now is the time to do one if not previously done.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
At any time you may contact HP support for assistance. They can remotely access your system tto help you overcome difficulties.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Flashing black screen hp pavilion dm4

For a few weeks/months (since mid august) now my laptop (hp pavilion dm4-2070us) has been flashing a black screen every so often, sometimes repeatedly within a few minute time span or there could be hours at a time that it does not flash. Also, only parts of the screen flashes black not the whole thing. I have taken it to the store I bought it from and another store and they said it could need a new screen, but I am not sure if this is a hardware problem. The laptop has no water damage and no other external damage. I do not know if this is a sign of a crashing computer.
Thank you for your help!

A flashing screen is usually a hardware problem, along the lines of a damaged ribbon cable. However, there are a few things you can try to resolve the issue. Try the steps in this document and let me know if any of those help.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Problem in Creating New partition in Pavilion dm4 1217TX

I have a hp Pavilion dm4 1217TX model laptop. I want to partition the hard disk (640GB) to separate the OS to the data. I think this is a very basic safety feature that will save my data in case of Windows failure (which is a very common problem). I have already split the C Drive and the new condition of my hard drive is
System           199 MB       Primary
C                        70 GB       Primary
Unallocated   494 GB       Logical
Recovery           32 GB       Primary
HP Tools        103 MB      Primary
Now I can't create partition in the Unallocated space because of 4 Primary Partition it already has. Now what can I do ? I can't understand that why it comes with four Primary Partition and without any Extended partition.

Hi, there, I have the same problem with you, because of the OEM of the laptop, they have partitioned our hard drive in advanced, however this partition is not logical. As we know, when we install Windows7, the system partition and system reserved partition are set as primary partition without doubt, but how could they make the HP tools and other partition as primary partitino too. I'm very unhappy with this. I don't know WHAT are they thinking about. Every one who has a bit comptuer knowloage knows the rules of createing new partitions in Windows. In my situation, I could only copy the data on recovery to C drive, then delete it. and recreate logical partition, then copy it back. Hope this could also help you.

Mousepad not responding Pavilion dm4

Similar Messages

Maybe you are looking for