MOV and MTS in one sequence

I filmed with two cameras in 1080p. One in MOV and the other in MTS.
How should set the sequence to edit in both formats on a single timeline?
regards

As long as they're both the same resolution and frame rate, it won't matter which preset you use, so long as it also matches resolution and frame rate.

Similar Messages

  • Premiere Pro CS4 Codecs: MOV and MTS

    I am looking for codecs for Mov and MTS file types for Premiere CS4.  Anything I can find on the Adobe site?
    Hendrik
    =========================
    Thread moved by moderator to Premiere Pro CS4 & Earlier

    Also, CS4 has a different forum http://forums.adobe.com/community/premiere/premierepro_previous?view=discussions

  • Mixing DVCPRO HD and Animation in one Sequence...Thoughts?

    I'm working on a project that was shot in DVCPRO HD 720p,
    and I need to include a lot of clips that have been processed
    to create alpha channels, so I'm using the Animation codec
    (square pixels) to bring them in from Shake.
    With all the layering I'm doing, now the only clip using DVCPRO HD
    is the background. Playback is quite choppy, but it's all working
    when it's rendered.
    Just wondering, would it make sense to set the sequence to
    Animation codec, with square pixels, and if so, should
    I set Render preferences to RGB instead of YUV?
    Or maybe I should convert the sequence to ProRes 422?
    Or should I just keep it set to DVCPRO HD?
    My final output could be either codec. I'll probably make
    some DVDs, HD H.264s, and a Flash movie by the time I'm done.
    If you can offer any advice or point me to a workflow
    description that addresses extensive layering in FCP,
    I've got some chocolate covered stars to give away.
    Thanks for your time!
    Les

    If I could afford FCP 7, I would definitely use ProRes 4444.
    Sigh.
    Meanwhile back in my world, I didn't quite understand
    what Luca wrote:
    gogiangigo wrote:
    you may want to offline your edit using Apple ProRes
    (use composite modes if required) and when you are done...
    online everything for the master.
    If I use ProRes 422 for my offline codec, how do I access
    the alpha channel? Seems impossible.
    I was using a bizarre workflow, which I may use again.
    Whenever I had a Shake render with alpha, I would render
    out 2 DVCPRO HD files: One with the RGB data, and one
    B&W with the alpha data. Then I would place them
    both on the FCP timeline, with the RGB track using
    the B&W track in Travel Matte Luma mode.
    That technique works OK, but you've got to remember
    not to premultiply, since with non-alpha clips,
    you don't have the option of setting the alpha to Black.
    Anyway, Luca, if you could explain your idea in a little
    more detail, that would be cool.
    Anyone else out there doing complex layering in FCP?
    FCP 6, that is.

  • HT1725 I got "error=-36" while downloading a movie, and now I can't get it to resume

    I got the error 36 while downloading a movie that I purchased. However, I had to pause it as I was downloading another movie and wanted that one to download a little quicker. Initially, I got error-50 and so I followed the instructions from that feed such as go to Itunes>preferences>restore cache and then restarted my computer (macbook pro) and restarted itunes. Now, I get error-36 and the movie still won't download. According to my account in the itunes store, it's already downloaded. I looked in Music>Itunes Library>Movies and it's not even there....so now what do I do???
    Thanks for any help

    I had the exact same problem...i just deleted the download and re-downloaded it...seemed to have solved the issue

  • How do I batch convert 700 sequences to .mov and .mv4 files?

    I have 700 separate sequences in FCP. Each one is 20-30 seconds long. I need to rename them and convert them to .mov files and then also .m4v files?
    Is there an easy way to batch this or do I have to do them one by one by one by one..........

    Try using the *Export Queue* (in FCP click Window > Export Queue).
    1. Once the window is open, in the Browser window, highlight the sequences you wish to export.
    2. Click and drag them into the *Export Queue* window. You should see a folder called +Batch 1+, with all your sequences.
    3. Click on the +Batch 1+ folder and press the Settings... button at the bottom of the window.
    4. Set your output destination.
    5. To export full res, the format should be *QuickTime Movie*, and the settings should be *Item Settings*.
    6. Include *Audio and Video*, or *Video Only*, depending on what you need.
    7. Check the *Make Self-Contained* check box.
    If your sequences are NTSC DV, to export .m4v you will want to use Compressor 2, so that you can fix the aspect ratio (NTSC is 720x480 while the iPod size is 640x480 or 320x240. This is the difference between square and rectangular pixels.).
    1. In the *Compressor Preset* window, find the +iPod Video+ folder, and the +iPod Video+ preset inside the folder.
    2. Click the preset and press the *Duplicate Selected Setting* button at the top of the window. A setting called +iPod Video-Copy+ should appear in your Custom folder.
    3. Click on your new setting.
    4. In the Inspector window, use the 6 buttons to change the settings to what you need.
    5. Make sure in the Encoder section, that you choose your size (640 VGA or 320 QVGA) and pick the proper aspect ratio (4:3).
    6. Save your settings.
    7. Drag the full res files you exported from FCP into the Batch window. *Select All* (Command + A).
    8. Right-click in the Setting column and choose your +iPod Video-Copy+. It will apply that setting to all your videos (it may take a while depending on how many you do at once.)
    9. Save your batch.
    10. Submit!
    For renaming, you might try an Automator script. Search the forums or Google, if you need help with that!
    Hope this helps!
    -Tim

  • I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one view a movie downloaded to the MacAir on a TV screen?

    I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?

    Welcome to Apple Support Communities
    That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
    This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video

  • Can  you move your notes from one iphone to another and how?

    Can you move your notes from one iphone to another and how?

    You can do this a couple ways.  If you are using MobileMe, notes is one of the options for synchronization and that would be automatic.  Another way is to backup your iphone to iTunes, this backs up essentially all the information on your phone (except for music) and if you restore the other iphone to the image of the original your notes will be transfered.

  • My wife and I have shared one iTunes account for 6  years.  We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc.  Is there a way to move music/apps from one ID to a new ID?

    My wife and I have shared one iTunes account for 6  years.  We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc.  Is there a way to move music/apps from one ID to a new ID?

    JoeyV325 wrote:
    Is there a way to move music/apps from one ID to a new ID?
    No.
    One of you create a new AppleID and one use the existing AppleID.
    But you can still use the items in each iTunes library.
    Create separate computer logins for each of you.
    This will give you each your own data. Contacts, calendars, photos, etc. (and your own iTunes library).

  • Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

    Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

    It should be in the Users/ Shared folder.
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Note the option to check and repair Library Permissions
    Regards
    TD

  • How do I move an object from one photo to another and then change the scene, i.e.  winter to sum?

    How do I move an object from one photo to another and then change the scene, i.e.  winter to summer?

    OK.
    Open the picture with the new scene. This will be your canvas.
    Open the picture with object A, select it with one of the selection tools, go to Edit>copy
    Go back to the new scene/canvas, Go to Edit>paste
    Repeat for object B
    Use the move tool to position A & B, each on its own layer. Use the corner handles of the bounding box to resize, if necessary
    You should have 3 layers: Background layer, and the 2 layers with A & B
    Note: It's best if the resolution of the 3 picture files is the same value.

  • Hi I have 2 apple id's one which has pulled through everything except my calendars and one which has pulled through just my calendars. How do I move my calendars from one apple id to another?

    Hi I have 2 apple id's one which has pulled through everything into icloud except my calendars and one which has pulled through just my calendars. How do I move my calendars from one apple id to another so that I can see everything in icloud with one apple id?

    Having read some other posts I think I have answered my question. If I was somehow able to terminate my old (unwanted) account and Apple ID I would no longer be able to access the material I bought with that ID-  so I'm stuck. I have to learn how to manage that situation.
    This is unfortunate for Apple consumers. Life is complicated for families these days and this "rule" although it is in place to prevent cheating and fraud makes things unnnecessarily difficult for me and my family as in my niaevity (sic) with the online world I bumbled into this situation. Not everyone is out to rip off Apple - one of the worlds richest corporations- or the entertainers who market their work through iTunes.I would just like to be able to enjoy the entertainment I pay for where and when I like to on whichever computer is available to me. And I'm not terribly computer literate.   
    It would have been nice to have had the opportunity to speak just once to a real person in the employ of Apple to explain my situation to them.

  • Multiple PC's and Itune libs, how do I move a playlist from one lib to Iphone if phone not sync'd with that lib / pc?

    Multiple PC's and Itune libs, how do I move a playlist from one lib to Iphone if phone not sync'd with that lib / pc?

    La121485 wrote:
    how do I move a playlist from one lib to Iphone if phone not sync'd with that lib / pc?
    You create the playlist on the other computer which may require moving or copying of the media from the first computer to the second computer.

  • In pages, when a create a document, potions of it, say several pages will be clumped together and it effects me editing their order.  It is like they are forever joined- How do I edit my document and print just one page or move just one page?

    In pages, when a create a document, potions of it, say several pages will be clumped together and it effects me editing their order.  It is like they are forever joined- How do I edit my document and print just one page or move just one page?

    May you open your eyes before creating a new thread ?
    Your question was already asked and answered today.
    https://discussions.apple.com/thread/3177074?tstart=0
    Yvan KOENIG (VALLAURIS, France) jeudi 14 juillet 2011 14:40:40
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please :
    Search for questions similar to your own
    before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • I need to move 1000 photos from one library to another. How do I do that and keep the ratings and dates they were created?

    I need to move 1000 photos from one library to another. How do I do that and keep the ratings and dates they were created? I tried exporting them, but it loses all info. Also, how do I move the quicktime movies from one iphoto library to another? They were exported as jpgs

    Add both libraries to iPhoto Library Manager.  Then select the events or albums that you want to copy from library A  and drag them to library B in iPLM.
    This video shows the process:
    OT

  • I have an iPhone 5, IPad and. Mini Ipad. On big my phone and IPad I can " move and scale my pics to save as wallpaper but on my mini IPad I cannot do it. I have tried everything. All the updates have been done. No one seems to be able to help me. I have g

    Please help ! Why can I not " move and scale my pictures as wallpaper on my iPad mini ? I can do it on my ipad and iPhone. No one seems to be able to help. I am not alone in this but nothing is being done to solve this problem. I have googled and there is a lot of discussion on this, many updates have happened , but still I am unable to do it. Very frustrating !

    Do you have the parallax effect (the 3D effect) 'on' (Settings > General > Accessibillity > Reduce Motion 'off') ? If you do then you will either need to create higher resolution versions of your images, or turn that effect 'off'.
    From http://support.apple.com/kb/HT5595 :
    When the parallax effect is on, you may notice the following:
    Wallpaper, icons, and alerts shift slightly as you move your phone.
    When you set a wallpaper in Settings > Wallpapers & Brightness, the photo or image will be slightly zoomed and can't be scaled to fit the screen.
    If you zoom in, you will need to rescale your wallpaper to fit to the screen. You can't rescale certain photo formats, including landscape or square images.

Maybe you are looking for