.mov created with 7.1 on a mac gives a -2048 error in Quicktime 7.1on a PC

Anyone know why a .mov file created on a mac gives a -2048 error in Quicktime on a PC? Both computers have the latest version of Quicktime and OS.
Help?

When I "get info" on a Mac the format is DV/DVCPRO - NTSC, 720x480, Millions, DV, Stereo, 48Khz, 30fps. It's a 455MB file captured to a .mov using Sorenson Squeeze. I then copy it to a FAT32 hard drive and transfer it to a PC (WinXP). I've got Quicktime 7.1 installed on both machines. I thought it might be the FAT32 hard drive but it isn't because I burnt a data dvd from the Mac and then dragged the files onto the PC from the DVD. Same issue. -2048. I don't think I am creating problems in the transfer...
I've read some of the post and I tried renaming the file .wmv and the video plays fine in windows media, but the audio is crackling.
I can't import into any PC video program, Sorenson, Vegas they all give me unsupported file type errors.
Thanks for your help.

Similar Messages

Fillable Form Fields Created With Acrobat XI Pro on Mac Won't Save on PCs?

Hi all,
Apologies if this has been covered already, but I've done a search of the forums that have turned up nothing.
Briefly, I have created a fillable form with Acrobat XI Pro on a Mac. The original file was created with InDesign CS6.
Once the fields were created in Acrobat, the file was saved as a Reader Extended PDF.
The problem is that Mac users are able to fill in the fields and save the PDF, while Windows users are not.
Any ideas?
Thanks!

Anoop9178 wrote:
Hi Alex,
Please refer to following forum post.
http://forums.adobe.com/message/5765569#5765569
Regards,
Anoop
You recommended answer seem to imply that the users are using Preview. When according the OP in that thread makes no mention on Mac except he created the form on Mac everyone else is using a PC. If anyone is using preview that answer would apply. If anyone filled out the form using Preview then follow the advice in the Link
I would say your using possibly the wrong Font or the wrong version of the font. If anyone has Acrobat on a PC open the form on a PC if the form fields appear as though nothing is there, then see if you can change the font used. Just try anything other than what is listed. See if the text appears. If it does then you have a defective font or the Mac and PC don't use the same version.
On Mac, if you have more than one version of a Font Style, say Aerial Italic for example, issues like this invisible text will happen. Macs don't tolerate more than one version of the same Font. You can't have two versions of say Aerial Italic or Helvetica Bold or Courier Bold Italic. PCs you can have 50 copies of the same font and it don't matter. The applications just pick one if it happens to be different then That it.
In Reader or Acrobat you might set to use local Fonts that might clear up the issue On Mac go to Preferences and Page Display:
Check use local Fonts.

Why can't I import a .mov created with QT screen recording into FCX?

I created a .mov file with QuickTime's Screen Recording mode. The movie thus created opens in the QuickTime Player and plays fine, but when I try to import it into FCX's editor with File>Import, I get an error message: "File Error: 1 file(s) recognized, 0 access denied, 1 unknown".
Why can't I import this .mov to edit it in FCX?
Thanks,
George

Bengt, I believe the OP's "FCX" does mean FCE.
Like Al said, they need to be transcoded (say, to AIC) in something like MPEG Streamclip, QT Pro or Compressor.
Actually, FCP X will happily open them.
Russ

Cannot trim or edit a movie created with a Sony Cybershot DSC-T200 camera?

Hi there people. I've created some mpeg movies using my Sony Cybershot DSC-T200 then copied them onto my Imac. I want to trim the start and end of the movie which i know is possible within Quicktime as i've done it with other video formats from other sources and you just drag the selection markers on the playback bar to the desired points then re-save. However when i open the mpegs in Quicktime created with the Sony camera, the in and out selection markers are not there? Can somebody help me with this situation as it's driving me nuts. I have the full Quicktime Pro version too so know that's not an issue.
I've exported the mpeg as an Mp4 as a test and it then lets me edit but i'm losing video quality. I've also got a program called MPEG streamclip which lets me clip the mpeg but still getting the quality loss.
Any help would be greatly appreciated!

However when i open the mpegs in Quicktime created with the Sony camera, the in and out selection markers are not there? Can somebody help me with this situation as it's driving me nuts. I have the full Quicktime Pro version too so know that's not an issue.
Multiplexed compression formats have never been "fully" supported by QT. And, as a result of a number of recent updates, many of the "contextual" features are now correctly turned off when they should be turned off while others "partially" work even when they shouldn't. When dealing with multiplexed files, you should use an MPEG-based, third-party application like MPEG Streamclip to ensure all features are properly functioning.
I've also got a program called MPEG streamclip which lets me clip the mpeg but still getting the quality loss.
If you use the "Save As..." option to save your files after trimming, there should be absolutely no loss in quality since there is no re-compression of the data. (I.e., the trimmed data is simply copied to a new file container.) On the other hand, if you are exporting the data after trimming, then there is always an opportunity for a loss in visual quality -- especially if you use a lower data rate than your source in order to create smaller files. In this case your are actually "throwing away" data which is what causes your loss in quality.

DVD movies created with DIVX Author

Can I use or watch videos that I create with DIVX Author? Meaning like it if has menus and that make reference to other areas on that package? I would like to put my family video on my Blackberry. Is this possible. I, was surprised that it will play DIVX files.

Hello Malikius,
Here is a list of supported media types for the BlackBerry PlayBook:
http://bbry.lv/gxeyDC
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Facetime for Mac gives me an error that says "quit unexpectedly".

Why does it do this? I try to make a call from my Ipad2 to my Mac Min using Facetime, and the app on my Mini shuts down and gives me an error message every time. It seems like Facetime is running fine on my Ipad2, but it's the desktop version that is faulty. I've reloaded the app 3 times and they obviously haven't found the bug. Apple support is anything but...anyone know how to fix? The rest of the error message reads like this:
Process:         FaceTime [54134]
Path:            /Applications/FaceTime.app/Contents/MacOS/FaceTime
Identifier:      com.apple.FaceTime
Version:         1.0.2 (166)
Build Info:      FT_Monaco-1660000~1
App Item ID:     414307850
App External ID: 3531181
Code Type:       X86-64 (Native)
Parent Process: launchd [85]
I bought the Ipad2 so I could facetime with my family while on the road, and ironically it's the desktop version that is failing me. Thanks in advance to anyone who can help me!

Never mind. Figured it out. My webcam wasn't fully functional. I had it attached to a peripheral USB hub and it wasn't drawing enough power to work correctly. Therefore, Factime freaked out and quit on me. Just make sure you have your webcam attached directly to USB port on your computer.

Creating another AS2 agreement for another customer gives me an error on my companies party.

I had created an AS2 agreement for company A to communicate with company B (my company).
It's all working fine now after some issues.
I am now creating another AS2 agreement for company C to also communicate with company B (my company).
Gives me a identity already in use (company B - My company), what gives?
Thanks
Bico Bielich

Have you gone through below post
Catering for non-standard UNB identification qualifiers in EDIFact envelopes with BizTalk
2010
Thanks
Abhishek

HT1296 When i try to sync my ipad with itunes on my computer it gives me an error message saying that the sync session failed to start." How can i fix this??

When i try to sync my ipad with the itunes on my computer it gives me an error message. " The sync session failed to start. How can i fix this?? I had to uninstall itunes on my computer because of runtime error R6034.

The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.

Trying to create an account on eprintcenter but it gives me an error regarding server problem

I am trying to create an account on eprintcenter since one month but it gives me an error regarding server problem
"Lo lamentamos. ¡Se acaba de producir un problema en nuestro servidor! Hemos registrado el problema y lo corregiremos en cuanto sea posible. Disculpe la molestia."
"Sorry. There is problem on our server. He have registered the problem and solve as soon as possible. Sorry for the inconvinience"
How can I use eprint service without a user?

What browser are you using to access the site? I would start by trying to access the site from another browser. If that is not an option, I would clear the viewing history, cookies and cache for that browser under the settings. Then I would reboot the computer too. I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Movie Created with Windows Movie Maker

I created a movie of our recent vacation with Windows Movie Maker and I am now trying to get it on my iPod. Can someone tell me the best way to accomplish this.
Thanks,

I downloaded Handbrake, but I am having difficulty making it work.
I also downloaded Videora, and I was actually able to get my movie into iTunes, but when I converted the movie in iTunes to transfer to my iPod, it lost sound.
Any suggestions?
Thanks,

How do I play my completed 3D movies created with CS5.5 and Cineform Neo3D?

I know how to display a video being edited with CS/Neo3D but how do I play it after the completed movie is rendered in its final form.
I have not been able to verify that I can use Quicktime 7 and the FBX QuickTime Viewer Plug-in from Autodesk? I think you could output to a 3D TV connecting it to the Mac graphics card DVI output (with a HDMI 1.3 converter) using the 2nd Display option of Quicktime. Will this accept a full 1920x1080 to each eye and include audio? Can I put the 3D movie on a DVD to play directly on a 3D TV? Thanks.

Following is the thing i found after many searched for you..
Anything goes awry in this unholy menage-a-trois that causes a hard shutdown, harms the OS and it is being a great reason subsequent failure to boot up due to a lockup at the "Welcome" splash screen, You will have to press the "enter" key with machine gun rapidity when the "Welcome" first starts moving and keep it up despite the little tone telling you to desist. It seems to work. I have run out of more logical solutions....
This is the only thing i can suggest for animated techniques whether in form of animated movies or anything else.

Some pictures not available to edit in movie created with stills

some pictures seem to be "behind" other pictures. this has something to do with adding transitions as i found when i deleted a particular slide; others would appear. now i have a particular slide i want to remove but it is located behind another slide. is there a way to pull that one forward without deleting the transition?
in the timeline view i can move the indexer along the timeline until right in the middle of the slide, another slide will appear on the preview screen.
all slides work well when the entire show runs.

Everything goes according to plan, until I try to 'open' into iMovie.
You must IMPORT it into imovie.
Once in iMovie, you can do your edits. If it's one series of clips it will come in as one movie.

Streaming QT Movies Created with iMovie HD 6

My web hosting company, dreamhost.com, offers a Darwin streaming server for to post streaming QuickTime Movies. My problem is that their documentation uses links/examples for QuickTime Pro, not iMovie which is what I have.
http://wiki.dreamhost.com/index.php/Object_Embedding
http://wiki.dreamhost.com/index.php/QuickTime_Streaming
Also, the markup they propose uses a "poster" movie but I can't understand what that is or how to produce it:
<embed src="poster.mov" href="rtsp://yourstreaming_subdomain.com/your_streamingsubdomain.com/movie.mov" width="200" height="240" target="myself">
Can any one tell me:
1. How to produce the files I need for streaming using iMovie, and
2. What markup I used in my web page to stream the movie.
Thank you in advance for your help.
- nello
iMac G5 20" flat screen (w/o camera) Mac OS X (10.4.8) 1.5 GB RAM
iMac G5 20" flat screen (w/o camera) Mac OS X (10.4.6) 1.5 GB RAM

Here is a great code generator for the HTML:
http://cit.ucsf.edu/embedmedia/step1.php
iMac G5 20" flat screen (w/o camera) Mac OS X (10.4.8) 1.5 GB RAM

.mov problem with Premiere CC v8.1 Mac OS 10.85

HI,
I got a serious problem. I bought a Creative Cloud Subscription and I try to open a project and the files connect alright but I can only play audio, no video it shows red.
The clips are .mov and were converted from a MXF to mov using XfcpX 2
They play alright on anything but Premiere so I know the clips are alright.
Thanks for your help.

Hi Jorge,
See if updating to Premiere Pro CC 2014.2 (8.2) solves this issue.
Thanks,
Kevin

How can I replace an existing app on iTunes that was created with PhoneGap to a new version created with Adobe DPS? I get a 'supported devices' error message when I try to upload to iTunes! HELP!

I created an app using PhoneGap a couple of months ago, and have now just amended it using Adobe DPS. But when I come to upload it to iTunes, I get the error message "This bundle does not support on or more of the device supported by the previous app version" How can I correct this?

I suspect your PhoneGap app was flagged as running on both iPad and iPhone. You'll need the same from DPS. You can do this in AppBuilder at the start of the wizard where it asks what kind of devices you want to support. Note that this is only available to DPS Professional and Enterprise customers. If you are a Creative Cloud customer building a Single Edition application it will only support iPad.
Neil

.mov created with 7.1 on a mac gives a -2048 error in Quicktime 7.1on a PC

Similar Messages

Maybe you are looking for