.mov file does not display on the web-site

iWeb is easy to use but my simply link to a .mov file does not work. I am working on the Domain file on my Desktop so I can move it between computers, and it renames the media file in the inspector from name.mov to name-1.mov. In the end the site does not display the animation.

Are you linking to this file so that it can be downloaded from your website?

Similar Messages

Siebel Charts gets generated but does not display in the Web client

Siebel Chart is getting generated in NetChart4.6\Server\root\projects\Siebel.chart folder. However does not display on the Web client
There is either no error displayed on the front end...
Also note that Charts is installed on Windows environment and Siebel Server is installed on Linux Server

Dear User,
Thanks for using Oracle communities.
Does this happens in dedicated client as well?
We would need to have traffic captured when you are actually executing actions. The tools like fiddler etc will help here to track the traffic.
I would suggest you open SR with MOS since it will need some analysis on network trace like fiddler. You can refer this thread in SR as well, so that once issue gets resolved thread will get updated with solution which will benefit others.
Best Regards,
Chetan

Manage On Demand Does Not Work on the Web Site

Trying to Manage on Demand on the web site. Page does not load correctly. IE Crashes. Firefox just does not work. Something wrong with the web site.

I've had same problem for 3 months.They've been to the house twice about this issue and still no fix.They won't pay attention until enough of us cancel and that is exactly what I plan to do

The control of adf media does not display even the Control attribute is set

Hi
I am trying to play a clip in a jspx page. I use an ADF media to embed the file and play the file by quicktime. I set the control display attribute to "all" or "typical" but the control does not display when the browser(FF) display the clip.
Can anyone help me?
Thanks

try adding mime-mapping in web.xml. Just a suggestion and I haven't tried this control.

Related Content does not display on the name change page

Hi all,
Currently, i am doing some research for the related content. I find that delivery configuration has been on the Name Change component (self service). Then I do the security configuration but the related content option does not display on the name change component. No idea which step next i should take.
Please advise.
Any reference or docs is also welcomed.
Dennis

Hi,
What do you mean by my two nodes are all local.
Are you trying to use Related Content within one environment?
Make sure you have an authentication domain set on your webprofile and that your hosts file reflects this.
Make sure there is no proxy or firewall in the way.
Make sure Integration Broker is setup correctly.
Try pinging your server including the authentication domain.
Try looking for log files in the application server and errorLog.html in the Webserv folder.

When I burn a disc from a playlist in iTunes, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

When I burn a disc from a playlist in iTunes on my MacBook, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

No, this standard has been implemented for several decades.
How iTunes remembers audio CDs - http://support.apple.com/kb/TA27785
It is just conceivable you burned a CD that exactly matched one already in the Gracenote database. Gracenote uses track count and duration to decide what CD it is you have in a computer. If you have one that matches that it will label it. You could conceivably even have one that matches it that is not the correct one.
This script will only work on Macs:
http://dougscripts.com/itunes/scripts/ss.php?sp=cdtexttocdinfo - script to use CD-text file on CD to label CD in iTunes

Adobe Illustrator does not download. The web page says "Illustrator is downloading now..." but it doesn't finish downloading.

Adobe Illustrator does not download. The web page says "Illustrator is downloading now..." but it doesn't finish downloading.

Hi simplejva,
In your downloads you will find CreativeCloudSet-Up file . Install it on your computer.
You will be prompted to sign in into Creative Cloud.
Just refer this article for installing Illustrator from Creative Cloud :
https://helpx.adobe.com/creative-cloud/help/install-apps.html
Hope it will help .
Regards
Megha

Error in script task "The name 'file' does not exist in the current context"

I am new to the c# scripting and SSIS come from PHP and Foxpro.
I am using SSIS with a script task and I am getting am errror "The name 'file' does not exist in the current context" in the following code in the picture below: (See
Why does the object named "file" go away after the first refrence to it?? How do I make it avaliable for the whole script??
     public void Main()
        String cFileInfo = null;
        DateTime dFTPFileDateTime;
   bool fireAgain = true;
            List<IRemoteFileInfo> fileList = (List<IRemoteFileInfo>)Dts.Variables["SFTPResult"].Value;
            foreach (IRemoteFileInfo file in fileList)
                cFileInfo = file.Name + "|" +file.ModifiedTime +"|"+ file.Size;
            Dts.Events.FireInformation(1, "Name ", cFileInfo, "", 0, ref fireAgain);
            dFTPFileDateTime =
file.ModifiedTime;
<< This is where the error is occuring.
            Dts.TaskResult = (int)ScriptResults.Success;

I think you forgot { and } after the loop... Or is that deliberately?
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

When I click on a link the address does not display in the location bar in the new tab. Which makes the back/forward button and refresh buttons unable to be used

When opening a link any link from firefox address does not display in the location bar. Even when navigating forward from there the address does not show back/forward button and refresh all rendered unable to be used

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

ASDM - does not display all the rules

Hello,
we replaced our PIX525 firewall with an ASA 5540 firewall, and now we see some strange behavior in ASDM.
ASDM does not display all the rules, but i see all all the rules in cli.
What can be the problem?
inside-asa# show ver
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)

Sure, i think we can manage that but i can only reply after one or two weeks ( change management ).
But i thought that our ASDM version is OK with this ASA version, see the link,
http://www.cisco.com/en/US/docs/security/asa/asa82/release/notes/asarn82.html#wp309157
Thank you for you help.

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

Hi ..
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Back to Safari. Press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari, try a video.

Flash Player Does not work at few Web Sites

I was using Flash Player 10 somehow it suddenly forced me to install the latest Flash Player and I did it. Now it does not work at few web sites but works on other. The web sites where it does not work I am including the screenshots. when I want to watch video on these sites it says loading ad and it keeps on like never ending please advise below are the screenshots of the two web sites where it does not work
Satbahadur
My Device is HP Laptop and I have Windows xp

Hi Chris
I checked on my daughters MAC laptop too its not working on it too. I may
try getting adblocker then I will try again. Thanks for your quick
attention I appreciate your help
Satbahadur
Message was edited by: Satbahadur Chris Sorry to add some more info I tried one adblocker called simple blocker but now the video does not load I am confused don't know what is possible Please advise when ever you have time Thanks again

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

Photo album does not appear on the web but does in a published folder

**** everyone,
My problem is the following: I started to create little webpage with iweb. At the moment it just consist of a photo gallery, one blog entry and one video. To test it I published itto a folder on my hardisk and the website worked perfectly. So I uploaded it to my server (I have no .mac account). When opening the site over the internet the start page looks perfect, as well as the video page but on the album page the album doeas not appear!!!
The URL is: www.voyage64.com just click on "Photoalben" (it´s a german page) and there is just nothing, There should be an album which also appears in the page published to a folder on my harddrive.
Another thing that does not work is the blog. When you enter "blog" you will see the list with one entry listed, that works fine on the web but if you click on that entry it tells you that the file was not found on the server but it is there, this also works on the published folder on my hardrive. The confusing thing is: I´ve another website on my server with a blog with more entries that just works fine.
Maybe it´s something with the RSS because I tested other stuff and whenever the RSS logo is visible in the adressfield in the browser something does not work. I actually don´t need any of that RSS stuff but there is no way to disable that.
Maybe it´s a fault with my server but I´m not a specialist in stuff like that.
So thanks in advance for your replies,
kind regards,
David

I followed the topic concerning the Firefox photoalbum problem but I´m using Safari and the albums will not show up on the web !!!! I also exchanged the detailview and headercontrol *js which worked fine for opening the photoalbum on my harddisk with firefox. But when its uploaded to the server it won´t display and that in Safari!!!! On the published folder on my harddisk everything works fine
www.voyage64.com
just cklick on "photoalben" no album apears. Does anyone have the same problem with safari ???
regards,
David

Imported .mov file does not play in Flash export

I have imported a .mov file as a background for a flash banner I want to put on my website. The exported flash file plays all of the text animations, but the .mov background does not work -- it's just frozen on the first frame. I have read similar problems with QT exports, but I haven't found any similar flash problems. Thanks for any help.

I think it might be necessary to look at the Inspector in QuickTime. Open the .mov file in QuickTime and go to Window > Show Movie Inspector:
In the info window that comes up, under the Format: field you want to look at the second row where it tells you the audio track format:
In this example, this particular clip is in a really odd format. It is MPEG Layer 2 (no Layer 3 which is MP3 format) at 32Khz, Mono. Preferably for anything in iMovie or iDVD you would prefer the Inspector to look like this:
Linear PCM, 16bit (etc) 2 channels, 48kHz. This can be accomplished by downloading and installing MPEG Streamclip. Open the program and drag the .mov clip into the applicationw window (with five dots in it). Then under the File Menu choose Export to QuickTime:
Then go to the Compression pull-down menu and choose Apple Intermediat Codec (AIC):
Then under the Audio section, leave the audio pulldown to uncompressed but do set the sample rate to 48kHz instead of Auto:

.mov file does not display on the web-site

Similar Messages

Maybe you are looking for