.mov file loads into lightroom ok but crashes when playing

Lightroom 4.1
QT player 7.7.2 is installed
Window 7
H.264 HD video from Canon S100 camera
.mov files plays fine in WMP
First frame of video displays in LR library module. In LR library view, click play. Video advanced about 1 frame then hangs. I get the "Adobe Photoshop Lightroom 64-bit has stopped working" pop-up window. Programs has to be closed. This happens every time.
None of the following processes are running before starting LR:
dynamiclinkmanager.ex
dynamiclinkmediaserver.exe
amecommand.exe
Adobe QT32 Server.exe.
video also plays ok in QT player and WMP

Problem solved. It was an authorization problem. The answer resides here: http://docs.info.apple.com/article.html?artnum=306424

Similar Messages

Spreadsheet initially loads fine 'from iTunes' but crashes when reopening

I have a spreadsheet on my Mac using Numbers 2.0.5 and I am transferring it to my iPad using iTunes.
When I load it into Numbers 1.3.1 on my iPad, it loads perfectly. The spreadsheet has 62 sheets and all the data is loaded correctly, and I can make changes to it without any problems. Since it loads correctly initially, I don't suppose that it is the complexity of the spreadsheet that is causing the problem.
When I load the spreadsheet in the normal fashion I get "Opening spreadsheet..." then ten seconds later a black screen, and then the iPad goes back to the home page.
Completely rebooting the iPad does not fix the problem.
I had this same problem with the previous version of Numbers on iPad, and I had hoped that an update would fix the problem, but this mornings update to Numbers 1.3.1 has not fixed this problem.
Help please.
Paul

Same thing happens here.
However theglenlivet12 is correct. The files should be in your itunes folder. They may not show on your playlist listing or in your library however.
Go to the directory where your music is stored. Mine was listed under itunes media, under an 'unknown artist' folder. There were 3 copies of some of my voice memos since I tried to get past the 'processing' part 3 times.
I wish there was a 'cure' for the stuck processing part though.
Message was edited by: ChrisJ1982
Message was edited by: ChrisJ1982

I have accidentally deleted a large number of develped images in Lightroom before I did a backup. I reimported the original raw files back into Lightroom hoping the develop settings would be re-established but no luck. Notice system mau have done an auto-

Question?
I have accidentally deleted a large number of develped images in Lightroom before I did a backup. I reimported the original raw files back into Lightroom hoping the develop settings would be re-established but no luck. Notice system mau have done an auto-backup as have an lrcat-journal file. Can I use this to restore my develop settings. I also have jpgs generated from all the deleted images.

Hello,
if you have a backup of your catalog you can do the following:
1. Backup your catalog first
2. Restore your backup catalog to some location
3. Open your current catalog and select "files->import from another catalog".
4. Select your backup catalog and your lost images. LR ask you if you want to overwrite the current settings or save them as a virtual copy.
As an alternativ you can open your backup catalog, select the "lost" images and save the development settings as xmp sidecar fiels (using ctrl-s). Then open your current catalog, seletct the images and use "Metadata->Read Metadata from files".

Sony 50mm f1.4 ZA SSM Lens Profile in 8.4 RC any way I can download file and load into Lightroom ?

Sony 50mm f1.4 ZA SSM Lens Profile in 8.4 RC any way I can download file and load into Lightroom ?

Short answer. No.

Why won't Canon Raw images in IPad air photoroll NOT load into LightRoom Mobile ?

Why won't Canon Raw images in IPad air photoroll NOT load into LightRoom Mobile ?
I can import Canon Raw images from my s120 into the iPad Air's photo roll but then the import from photoroll into LightRoom Mobile collections fails.
Any ideas on how to get this working ?
Thanks,

Raw import is not yet supported by Lr Mobile. You can vote for this feature request Lightroom mobile: Ability to import raw files

How to list the JAR files loaded into the Oracle Database ?

How to list the JAR files loaded into the Oracle Database ?

From 11.1 onwards, the below two views are available to identify the jar files loaded into the Database.
JAVAJAR$
JAVAJAROBJECTS$
By querying the JAVAJAR$ view you can know information about the JAR files loaded into the Database and using JAVAJAROBJECTS$ view you can find all the java objects associated with the given JAR file.
These views are populated everytime you use LOADJAVA with "-jarsasdbobjects" option to load your custom java classes.
But unfortunately this feature is available only from 11.1 onwards and there is no clear workaround for above in 10.2 or earlier.

*.wrl file loaded into applet!!!

I am useing vrml97 to load *.wrl file, And it works fine in application mode.
But when I run it as applet mode,it report an error:applet notinited.
I use the *.obj file loaded into applet, and it works fine.
What's the problem between *.obj and *.wrl?
How can I loaded *.wrl into my applet?

Just a little more information. When I enter owa_util.mime_header('image/jpeg') I can't display the file. It just shows up with a red x for the file.
When I enter owa_util.mime_header('image/jpg') it displays the file, but in the format
¿¿¿¿JFIF¿¿-Intel(R) JPEG Library, version [2.0.16.48]¿¿C
This is the way I would expect it to look if I opened it with Notepad, or an application that doesn't recognize jpg files. Can anyone tell me what I am doing wrong?? Thanks.

I need format for data in excel file load into info cube to planning area.

Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babu

Hi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit

Refer to an object in Edge from an onclick="" in a .html file loaded into an iFrame in the animation

HI, I am trying to figure out the Edge hierachies by stumbling my way through coding reference attempts. I've hit a wall...
How can I refer to an object and a global function in my Edge animation from an onclick="" located in an .html file loaded into an iFrame created within the master/parent Edge animation. Here's what I have...
My main index.html is an Edge animation. One object <div> is a box created within Edge. I have added an iFrame with the Edge code:
sym.$("MenuPanelScreen").html('<iframe src="list_images_cemetery.html" width="267" height="670" sandbox="allow-same-origin allow-scripts allow-top-navigation"></iframe>');
That .html file which loads into the iframe within the animation contains thumbnails in <a> tags and contain onclick="" statements that should call a function within the Edge file.
Eventually, I want the statements to read something like... onclick="changePic('Dragon.jpg', 'The Dragon', 'Saint and Worm')"
However, I had no idea how to reference the changePic() function in the Edge animation. So, just to figure out how to reference the parent animation from an html in an iFrame, I change the onclick="" statements to...
<a onclick="alert('Try to hide Nameplate'); sym.$('NamePlate_sym').hide();" > <img src="gallery/TheyGaveUpTheirDead.jpg" width="80" alt="Angel and Worm" /></a>
I first wanted to see if I could hide an Edge Symbol or div/element from the child html. I tried the following...
onclick="alert('Try to hide Nameplate'); sym.$('NamePlate_sym', window.parent.document).hide();"
I tried a few other variations that I won't bore you with. Can someone help me with the proper reference to effect an Edge element?
Furthermore, I eventually wnat the onclick="" statement to reference a global function on attached to the Edge stage in the compositionReady event of the stage. The function is...
window.changePic=function(myFileCurr, myLabelCurr, myDescriptionCurr) {
alert("in changePick");
document.getElementById("myImage").src="gallery/"+myFileCurr;
document.getElementById("myImageLabel").innerHTML=myLabelCurr;
document.getElementById("myImageDescr").innerHTML=myDescriptionCurr;
I hope someone can point me in the right direction. Please forgive my ignorance. i am just getting back into coding and learning the intricacies of Jscript and jQuery. Thanks!

Hi again Elaine,
I actually had some success after many attempts with using your code. I can control the .stop() and .play() of the "NamePlate_sym" symbol. Yet, I am still having trouble doing anything else with it. I cannot .hide() it, nor use .html("Change text") on another element on the stage called"Rectangle". If I can accomplish that and all a global function on the stage, I'm in good shape.
I placed the following script in the header of the .html file that gets loaded into the iFrame within the Edge composition:
<script type="text/javascript">
   window.parent.AdobeEdge.bootstrapCallback(function(compId) {
   comp = window.parent.AdobeEdge.getComposition(compId).getStage();
   alert("CompID is "+compId);
   var symbol = document.createElement('div');
   symbol.innerHTML = 'Rotate';
   symbol.style.cssText = 'background-color:#fea; width: 50px; text-align: center;';
   symbol.style.cursor = 'pointer';
   symbol.onclick = function() {
    if (comp.getSymbol("NamePlate_sym").isPlaying()) {
     comp.getSymbol("NamePlate_sym").stop();
    else {
     comp.getSymbol("NamePlate_sym").play();
   window.parent.document.body.appendChild(symbol);
        </script>
Once I put window.parent. in the first two lines of code and the last, my test worked. As I mentioned earlier though, I still can't get the syntax correct to .hide() an element (i.e. comp.getSymbol("NamePlate_sym").hide(); does not work), or more importantly, change the innerHTML value of an element on the stage. The code either does nothing or freezes.
Thanks... Tommy

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds. Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
-DH

Why won't .MOV files export from Lightroom?

Why won't .MOV files export from Lightroom?

The will.
Or at least they can, and do, sometimes, if you have good MOV karma..
Why not supply a little more info, like:
* Which OS
* Which version of Lightroom
* History of MOV files.
* Export format.
* Do other video types export OK
* How many different MOV files have you tried - all with the same history?
and of course:
* What, exactly, happens, when you try?
Rob.

Trying to import a .mov file in final cut ex but get the file error 1 file recognized 0 access denied 1 unknownpress, but get the press

Trying to import a .mov file in final cut ex but get the file error 1 file recognized 0 access denied 1 unknown

Most likely the file cannot work directly in FCE.
Please provide details on the file properties.
Al

I want to add a CD to my IPod Classic, the CD has been loaded into my library but my iPod is not showing on i-tunes and I can't get the CD onto my iPod.

I want to add a CD to my IPod Classic, the CD has been loaded into my library but my iPod is not showing on i-tunes and I can't get the CD onto my iPod.

Well if your iPod is not appearing under Devices in iTunes when you have it plugged into a high powered USB 2.0 port, then that would explain why this newly loaded CD has not synced to it yet.
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

HT204382 Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no d

Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference

Download and install the free VLC for Mac - that should work:
http://www.videolan.org/vlc/download-macosx.html

I rented a movie through iTunes and it downloaded but won't play.

I rented a movie through iTunes and it downloaded but won't play. It is present in the videos app but doesn't load the picture for the movie. When I go to play it, it just opens and then closes. There is an iCloud icon that suggests the movie has not Been downloaded and when I click it it says that the movie has already been rented but not downloaded and that I need to go to downloads to manage it. It is not present in my iTunes download page however. And when I go to rent it again all I get is a watch button that directs me back to the videos app with no way to watch it.

Hi Refvoxa,
Thanks for visiting Apple Support Communities.
If you are not able to play or download a movie rental on your iPad, first restart your device:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
After your iPad restarts, try resuming the download again:
If your download was interrupted using your iPhone, iPad, or iPod touch
From the Home screen, tap the iTunes app.
For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
Enter your account name and password if prompted.
Tap the blue download arrow to resume.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If the movie still does not appear in Downloads, and can't be played, I recommend reporting the issue with your purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Regards,
Jeremy

.mov file loads into lightroom ok but crashes when playing

Similar Messages

Maybe you are looking for