MOV file won't open in FCP

I was sent an MPEG file to edit and used Quicktime to export it as a movie (Integer, Little Endian, H.264) and yet FCP gives me the "File error: 1 file(s) recognized, 0 access denied, 1 unknown." error when I attempt to import it. Any one have any suggestions?

Shane already mentioned MPEG Streamclip. So go here for a tutorial and download link:
http://discussions.apple.com/thread.jspa?threadID=2070861&tstart=0
The original tutorial deals with files from DVDs (muxed MPEG2) which can be be found here:
http://discussions.apple.com/thread.jspa?threadID=2059475&tstart=0
All you have to do is tweak my instructions to suit your local TV standard or a higher res codec.

Similar Messages

Mov files won't open on mavericks

hello
i have a problem to open a mov video file that created in iMovie through mountain lion.
since i upgrade to mavericks that mov file won't open.
i try all the ways by using most of the convertor application that i can use.
even try with quick time 7 adding codecs packages and perian but nothing show on ....
i can't get even infos from that file. It only shows that is 8,9 GB of space and nothing more.
please if you have an advise on this , i would be grateful
thank you
Dimitris .Greece

I couldn't even find any QuickTime files on your page.

FCP 5.1 file won't open in FCP 7

Hi.
I am at my wits end...I have a FCP 5.1 file that I have been working on for years.
I had to upgrade to FCP 7 for reasons I won't go into and now my FCP 5.1 file won't open.
It is a file with footage from P2 cards. It has magic bullet/looks builder used throughout. I am not sure if that is the issue at one point ONE of the messages I got when it crashed (I got a few different ones at different times) was something about looksbuilder not working right.
In a nutshell, it slowly starts to open and then quits. (It gets to about 33 percent open over the course of 45 minutes and then crashes.)
The file is about half a gig and there is plenty of room on the MAC itself so it shouldn't be that the Mac is overtaxed.
I don't know what to do.
I tried opening various back-up copies, etc. because I thought maybe something was just corrupted. NONE of them open.
I tried deleting render files to limit how much it was trying to process when it opened the thing.
I even tried turning off the external drives that hold the media hoping that if it couldn't find the media it would just open the shell of a file for me and maybe I could reconnect it all later. Obviously, grasping at straws...
I am out of options. Do I just need to wipe my computer and reinstall 5.1 from scratch? That would stink because there is another project being worked on on the computer that is a FCP 7 file.
I tried putting a copy of FCP 5.1 back on the computer (so I have 7 and 5.1 on there now) to get it to open, but FCP 5.1 won't work either now (I get General Error 41 - whatever that means) Maybe you can't have two versions of FCP on the computer? Maybe it thinks it got opened in 7 so now it won't work in 5? even though it never fully opened? Guessing...
I'd appreciate any and all help. All I want to do is open the 5.1 file and save it in FCP 7 and work from there.
Thanks!
Shari

Hey Michael:
Thanks for the response. I did something similar in that I opened the file on another computer that had FCP 7 and it was fine. So I saved that. Then I went to my Mac and tried to open that file and it crashed...but it said something about Looksbuilder...so I contacted them and they had me uninstall, reinstall and then fix the preference files for Looksbuilder and it now opens.
YAY!
Thanks again,
Shari

.mov file will not open in FCP X?! codec unavailable? help!

I am trying to edit a short .mov file in FCP X. It was sent to me via YouSendIt. Once it has completed downloading, a message reads:
" The document “S-T3RRA Video Heads by FLOOD(1)-2.mov” could not be opened. A required codec isn't available. To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More. "
When I click tell me more, Apple provides me with some additional media support for QuickTime, however I should not need this for a .mov file correct? The file will not open in FCP X or QT. Any ideas? Suggestions? Was this file incorrectly exported by the creator?
Help!!
Thank you!
Diego Lopez-Videla
Houston, TX

Yes, it will be encoded using a codec that's not on your system.
That is a common misunderstanding with .mov - it's not a format, it's a container.
It basically contains video & audio streams that may be mp4, mjpeg or just about anything.
In this case, the "anything" is what we need to find out, so we can work out what you need to read it.
You could try opening it using VideoSpec - it will tell you everything.

.mov file won't open

I have a video that is a 2.12gb .mov file
my editor sent it on a dvd with some .mp4 files
the .mp4 files open perfectly
the big 2.12 gb .move file wont open on anything incluiding adobe media encoder
this is the second round of him sending me 2 different .mov file that wont open.(both are a little over 2gb
All the error messages say it cannot open because it is undf
I asked if he can open it and play it and he sends me a video of him opening it and playing it just fine
I have tried it on two different PC's...same message. I have tried QT and it says it doesnt recognise the file
VLC says undf ( but when i clear the error message...it has a 17:18:12 timeline and it starts playing to a black screen....i have let it play for a while and it looks like it would go for the full 17 hours if i let it...but the video is only 10 minutes...with loits of effects )
Now as a bit of information...he has a really fancy computer that has a PC and a Mac on it
so he does FCP and Adobe
I am wondering if this is a codec problem?
If so is there a way for me get this codec or do i have to have him convert it and send me another DVD?
Thanks!

>wondering if this is a codec problem
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

.MOV file won't open in quicktime

I have a Macbook Air OS 10 version 10.7.2 , Processor 1.68 ghz intel core i5, memory is 4gb 1333 mhz ddr3.
When i drag the .mov quicktime movie file into quicktime player i get this error message: "The document could not be opened. the movie's file format isn't recognized."
What do i need to download to make quicktime play this .mov file?
thanks!

Quicktime isnt a very good movie player. At all. If the file isnt corrupted, and is actually a valid file, then I would download and use VLC Player. It plays nearly every format of video file, and is completely FREE. It IS possible however, that the file you are trying to play is damaged in some way, and wont be played by VLC either. If VLC wont play it, the file is no good.

Mov files won't open on pc's in quicktime

help! i just did a little website for a friends rental home in acapulco (www.acapulco-villa-rental.com) and macs can open the 360 tours via quicktime (mov files) no problem...some pc's can and others are just getting a black box...i used the latest version of quicktime and offer the link for free download and they're still having problems even after they downloadthe new version...all they're getting is a black screen...any help or suggestions would be greatly appreciated.
p!

I couldn't even find any QuickTime files on your page.

I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files the error message is could not be opened. The movie's file format isn't recognized. " Any help or are they corrupted

I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?

Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files.

Mov file will not open on Premiere CS6 for Windows

I am a student working on a project that I started in university on an Apple Mac desktop. I decided to carry my project back home to continue with it on a laptop which is Windows...however the Mov. files will not open up on premeire pro and it is really frustrating as I have done a lot of work. How can I import these videos without losing any work or having to start again?

Quicktime X does NOT work http://forums.adobe.com/thread/888722
-Premiere Pro REQUIRES Quicktime 7 won't work with Quicktime X

.mov file won't import on PC. File imports on other PCs in office.

I am getting a "The file has no audio or video stream." The file opens and plays on all video players present on my PC and is able to be imported on another PC in the office. I have the most up to date version of Premiere Pro. Any reason why the .mov flle won't open?

Hi titodestro,
Thanks for posting on Adobe forums.
Please check if you have Apple QuickTime player installed on your system.
if not please install it from this link : https://www.apple.com/in/quicktime/download/
Please update if this works.
Regards,
Sandeep

After a itunes update my HDV mov files won't play on my mac.

I applied and update to my MacBook pro and BAM!! Now my HDV.mov files won't play with QuickTime or final cut pro. I'm in the middle of a project and I can't finish it because when the files play in fcp I get a error. Can anybody help me with this?

I have two anserws I think might work for you. The first one is: This solved the issue down loading and re-installing Quicktime 7.5.5
http://www.digitalrebellion.com/blog/posts/using_pacifist_to_downgrade_quicktime .html
I'd create a backup of the System / Components and Quicktime folders first though, just incase you need to revert back.
and the 2nd one is:
I HAVE A FIX...AND IT WORKS!!!!!!!!! Actually a friend found this fix somewhere else, but I just did it and it worked. The only rub is you need to have access to another system that has not been updated to iTunes 10.5 or QT 7.7.
On the system that has not been updated, go to:
MAC HD/System/Library/Components and copy that folder to an external drive...next go to
MAC HD/System/Library/QuickTime and copy that folder to an external drive.
On the system that is not working, go to the same places on the MAC HD and delete those two folders. Then copy the folders from your external drive to the same location. Restart you system...i did it twice...and everything should be back to normal. This has worked on both systems here that were previously jacked up. If you do not have access to a system that was not messed up, let me know and maybe we can swap files.
I havent tried any of these yet because I'm in the middle of a project and I dont wnat anything to go wrong right now. After I'm done I will be sure to get started on one of these.
If you try any one of these let me know how it works out.

After an itunes update my HDV mov files won't play on my mac.

I applied and update to my MacBook pro and BAM!! Now my HDV.mov files won't play with QuickTime or final cut pro. I'm in the middle of a project and I can't finish it because when the files play in fcp I get a error. Can anybody help me with this.

Take a look at this thread...
https://discussions.apple.com/thread/3385122

HELP! Files won't open and previously had Firefox icon instead of DW icons! Leap Year thing?

Hi! I went to update my website, which I do every night before the first day of every month and all the files had a FIrefox icon instead of the usual Dreamweaver one. I have shut down, reinstalled DW MX 2004 but the files still do not open. The icons have now changed to DW but they are not opening with right click, opening from Applications folder, double clicking the file, from get info and open with DW. I am stumped. HELP! Need to update for March 1st.
Is it something to do with Leap Year 29th Feb? Checked the clock in preferences but can't see how this affects it.
Firefox is always updated but the latest version does not seem to be as efficient as previous upgrades. We installed Chrome as well. Do they interfere with each other?

Hi Ken
I wish the 7.1 updater download had helped but it didn¹t. All the files
were backed up before the installation, which went fine.
Mac 10.5.8
We used Disc Warrior to defrag the hard drive, which did not make a
difference.
We recently started using Chrome, so now have 3 browsers in the dock,
Safari, Firefox and Chrome. Do they interfere in any way with each other?
The files, which I hadn¹t touched for a month as I update on a monthly
basis, initially had the Firefox icon.
Below is the message to send to Apple, which did not go through their report
system! A little disillusioned with the service!
Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 3.06
GHz, 4 GB
Graphics: kHW_NVidiaGeForceGT130Item, NVIDIA GeForce GT 130,
spdisplays_pcie_device, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E),
Broadcom BCM43xx 1.0 (5.10.91.22)
Bluetooth: Version 2.1.9f10, 2 service, 0 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD1001FALS-40K1B0, 931.51 GB
Serial ATA Device: PIONEER DVD-RW DVRTS08
USB Device: Built-in iSight, (null) mA
USB Device: Keyboard Hub, (null) mA
USB Device: iLok, (null) mA
USB Device: Apple Optical USB Mouse, (null) mA
USB Device: Apple Keyboard, (null) mA
USB Device: Deskjet 3840, (null) mA
USB Device: BRCM2046 Hub, (null) mA
USB Device: Bluetooth USB Host Controller, (null) mA
USB Device: IR Receiver, (null) mA
FireWire Device: d2 quadra (button), LaCie, 800mbit_speed
Does not mean a thing to me.
I am not late with updating the site, which is about New Zealand culture,
month by month (www.englishteacher.co.nz). Probably only the third time I
have been late since 2005. Not a huge amount of traffic, ~300 a month and
free access to content but I would like to solve this problem.
Could a reciprocal link have caused a problem?
At my wits end.
I really appreciate the help though.
Cheers Yvonne
From: Ken Binney <[email protected]>
Reply-To: <[email protected]>
Date: Wed, 29 Feb 2012 06:42:11 -0700
To: Yvonne and Bill Hynson <[email protected]>
Subject: HELP! Files won't open and previously had Firefox
icon instead of DW icons! Leap Year thing?
Re: HELP! Files won't open and previously had Firefox icon instead of DW
icons! Leap Year thing?
created by Ken Binney <http://forums.adobe.com/people/Ken+Binney> in
Dreamweaver - View the full discussion
<http://forums.adobe.com/message/4236682#4236682>
Not necessarily related, but did you also install the 7.1
updater? http://www.adobe.com/support/dreamweaver/downloads_updaters.html
Windows or MAC?
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/4236682#4236682 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/4236682#4236682. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Dreamweaver by email
<mailto:[email protected].ad
obe.com> or at Adobe Forums
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=2240> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/message/2936746#2936746.

My microsoft word and excel programs won't work and files won't open.

After an automatic HP update, my Microsoft Word and Excel programs won't work and my files won't open. What caused this and what can I do to fix the problem without losing my files? I have files that are part of my work and I HAVE to have them ASAP. Please help.
Thanks in advance.

Hi
Please find the steps to resolve your issue.
Open Installed Updates by clicking the Start button , clicking Control Panel, clicking Programs, and then, under Programs and Features, clicking View installed updates.
Click the update that you want to remove, and then click Uninstall. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Or Try this step
If this does not resolve your issue then you can try a System restore to the date where unit was working fine steps provided below for you.
Start in search box type System Restore then click on it then select the Date where unit was working fine.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

HT204382 mpeg video file won't open in quick time player on my macbook running snow leopard. Works fine in iMac running mountain lion. Any ideas

mpeg video file won't open in quick time player on my macbook running snow leopard.
works fine on iMac running mountain lion.
any ideas?

HI,
If iChat is Open and your think Accounts/Screen Names are logged in then go to the Window Menu
This should list the accounts that are logged in with various keystrokes ( Apple/CMD ( or ⌘) and a Number) shown next to them.
Using these should get the Buddy list "back".
It is possible to Hide the Buddy list and then Quit iChat.
iChat will then "remember" where the windows were eve if this was Hidden.
Can you confirm that after reinstalling or restoring from Time Machine with possibly an Earlier Version you have Downloaded the COMBO version of OS X 10.6.8 and "run the COMBO" (Installed it - again) to update iChat ?
It is possible the text chat Window is also Hidden on double clicking a Buddy.
The easiest way for this to happen is to use a second Display and drag some windows to the second Display.
iChat "remembers" where you last had Outgoing Chats so Audio and Video windows will be where you left them as will Text Chats.
Incoming Chat Invites are normally in set places unless there is a chat already open to that Buddy.
With Windowing issue like this is sometimes pays to delete com.apple.ichat.plist itself (on it's own) and restart iChat (this plist holds the window positions amongst other things)
8:49 PM Monday; February 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

MOV file won't open in FCP

Similar Messages

Maybe you are looking for