MOV files audio

Using PE11 and importing a video via SD card into the organizer, when played in the organizer panel, all audio/video sync up and look and sound great. However, when I attempt to add the same file to edit Premiere Elements, I have a 48 second video that is uploading and only 8 seconds of audio. I've tried slowing down the audio to match the video, but this seems to screw it up more. I cannot see any "conforming" happening during the import to PE from the organizer. I shot the video with a Nikon Coolpix L810.

When you add the video to the timeline, before you do ANY work, is there a red line over the video?
If yes, that means your project and video do not match... what is your project setting and does it match the video?
Some reading...
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
Saving & Sharing http://forums.adobe.com/thread/1051093
Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
And... exactly what is inside that MOV wrapper?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen
shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Similar Messages

Quicktime 7.5.5 SANYO Xacti MP4 movie file Audio Sync Bug..

Hello. I am awkward in English.
NEW Ver. Quicktime 7.5.5 SANYO Xacti MPEG-4 movie file..
Audio Codec AAC, Sound Sync Bug
audio and video files they are not in sync.
KMPlayer MPEG-4 movie file Problem without Play..
Quicktime MPEG-4 Sound Sync Bug, Wants a solution
Thank you for any help you can provide..

Codec : icod
I generally defer to folks like QuickTimeKirk on these sorts of matters, but I think that's the source of the problem. That's the Apple Intermediate Codec, an editing codec used on Macs:
http://discussions.apple.com/thread.jspa?messageID=7240374#7240374
... and it won't display on a PC:
http://discussions.apple.com/thread.jspa?messageID=7304343#7304343
Can the provider of the file re-export it using a different video codec for you?

Quicktime SANYO Xacti MP4 movie file Audio Sync Bug..

Hello. I am awkward in English.
Quicktime SANYO Xacti MP4 movie file..
Audio Codec AAC, Sound Sync Bug
audio and video files they are not in sync.
KMPlayer Problem without Play..
Thank you for any help you can provide..

Open the movie in the QuickTime Player and Select Export -> Sound to AIFF.
Drop the exported AIFF file into iTunes.
Make sure the iTunes CD Import Settings in Prefs is set to the MP3 encoder.
Right-Click on the AIFF file in the iTunes Library display and select Create MP3 Version.

Combine .mov files audio lost

When trying to combine .mov files from Nikon D7000 using QT Pro the audio is lost on the file that is pasted in. I have followed the instruct on page 31 of the manual that are very simple of selecting all in one file and edit-copy then open the next file and edit-paste to the beginning. When you play it back the audio from the pasted file is lost. Is the way the product actually works or is the some simple I have missed?

Does anyone know if this the expected behavior of Quicktime Pro when combining .mov files that the audio from the one being added to the other is lost?

Is there an easy way to move files (audio or pictures) from ios to Mac?

Eg, if I wanted to record an audio track with Garage Band on my ipad and then move it to my Mac.. Must be quick and easy. Obviously there are ways I could do it fast, like email..

Are they messages that were addressed to your MobileMe account?
You should be able to either create a new folder to be on the MobileMe server, and then select all the messages in any one On My Mac mailbox and move them. I would personally use the Move To command in the pull-down under Messages to do this, but they can be dragged en mass.
Ernie

How can I had an mp3 audio file to a .mov file?

I have a .mov file that I created with Quicktime screen capture but the audio was n ot captured. I did record the audio with an mp3 player and I would like to add that to the .mov file. How?
thanks
charlie

Thank you for that suggestion.
So I took the mp3 file which is about 60 minutes and added it to iTunes. I opened iMovie and dragged the mp3 to the upper left hand corner and dropped it into my project. Worked great for the first 13 minutes or so. After that, the movie still runs but there is no sound. I checked on iTunes and the entire 60 minutes is there but it didn't seem to transfer to iMovie. Thoughts?
thanks
charlie ruff

The latest .key I created is huge, .... Finder shows it as 5GB. Other .key of similar slide total are about 300-500MB. There is nothing different about this one. It is just .jpg files (photos) and text. No movies, no audio. Why so big??

iMac. 2.4GHz. Core 2 Duo. 2GB SDRAM. OS - 10.9.5.   Keynote - 6.2.2 v.1878.
I just completed a keynote slide show. The Finder indicates it is 5.25GB. It is 200 slides, no movies, no audio of any kind, no special transitions. It is just photos and some added text explanations. The individual photos are each 5-6MB, with about 190 photos total. I have other previous .key's about the size in terms of the number of photos and they are showing in the Finder as taking up 300-500MB. There is nothing different with this one particular presentation. I usually organize and store my photos using .key after a trip. Photos are downloaded into iPhoto (7.1.5) and then I build a keynote presentation by copying the photos as .jpg's out of iPhoto and into Keynote, with text as notes on or under each photo. Something changed with the latest keynote in terms of file size. But I can't determined why it required 5.25GB of disc space while other .key's of the approximate same size and content are only taking 10% of that amount. Anyone have an idea what is going on with keynote is this particular instance??? I know I could compress it, but I want to understand why the last time I used keynote the file size was so huge.    Thanks for the help.

Some additional information. In looking at the package contents info, under the DATA Folder there are several entries for each slide/photo in the .key presentation. There is a long list of contents that shows each image as:
    pasted-image-1234.png
and a second list right below that identifies each image again in the .key as:
    pasted-image-small-1234.png
Both of these lists show image files of 15-25MB for each photo, even though the original .jpg photo was 4-6MB. They list/show all of the images in the .key, but DO NOT show the added text. So it appears the package contents indicates two separate .png files for each photo in the .key, but the file size for each is 3-5 times greater than the original .jpg that was copy/pasted from iPhoto. And for some reason there are two copies of each.
There is also a list for the two following image/data files:
    pasted-image-small-small-1234.png
    st12-1234.png
Both of these lists show a file size of 100-200KB for each image, and again show all of the images in the.key.
Only the st-xx-xxxx.png list of images also show the added text.
Again it appears when I created the Keynote presentation by copy/paste images from iPhoto, Keynote stored multiple copies of each image as .png file several times larger than the original .jpg.   The completed Keynote slide show is so large is almost impossible to work with. The system is so slow that routine commands are not completed, e.g., trying to "save as" into a .pdf never finishes and I have to "force quit".
Still trying to determine why this occurred with the 6.2.2 version. Any chance I can delete all but the st-xx-xxxx image list and get back to a normal file size??

IMovie audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !

iMovie 11 audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !
I have created a project where I have a montage of photos and video clips edited together with music under. Some audio portions of the video files are being muted in some areas and those portions are being heard in another part of the project. This is not for all video clips only certain ones.
The project plays fine in the timeline, but when I render the project thru iTunes or Media Browser, this is when the project goes corrupt.
I tried detaching the Audio from the video clips and this somewhat worked, but the original problem still exists with certain audio still being heard where it's not supposed to be.

I have a fix - or rather, a workaround.
WARNING: It is lengthy, but still far better than starting a new project from scratch.
I had this same issue and none of my transitions/clips were at custom speeds, nor did I have anything else weird going on. Unfortunately there is nothing you can do within iMovie to fix this, at least there wasn't for me. iMovie is BY FAR the buggiest software I have ever used and if you haven't already spent hours slaving away on a project, you are so much better off using just about anything else to edit your video.
...But let's assume you have already spent many hours working on your project and you don't want to start all over. Well then, you have at least one option.
It's a pain in the neck, but it's infinitely better than restarting your project from scratch.
This will require:
A software called Soundflower (which is free) and some kind of audio editing software (I use Logic, but really any should work).
1.) You're going to need to export your video with the messed up audio. Typically if you're audio is messing up, you're video is at least usually working just fine (at least it always does for me).
2.) You're going to need to open that video in your audio software and import only the audio. If your software doesn't give you this option, then you're going to need to record the audio from your video using the audio software and Soundflower. You can find tutorials on how to do this, but it's honestly pretty straightforward once you start playing around with you Mac's audio I/O settings. Remember to have your computer's volume all the way up when doing this.
3.) Watch/listen to your video and make notes of where the audio errors occur. I HIGHLY RECOMMEND writing down times too, as they will be extremely helpful later.
4.) Now were going to rip some working audio from the iMovie project itself. Go back into your iMovie project and only play back audio while in the edit window for this step. Do NOT play your project back in full screen.
This part is key: if you try to play back your project from the beginning the audio will usually still mess up. So, what you're gonna have to do is go back on your edit window timeline right before these errors occur and play that specific clip back while recording this working audio with Soundflower and your audio software. Essentially we're only recording the parts of the audio where these errors occur, so try to do this in order if you can. Try to leave several seconds of audio in before the error - that way we can use it as reference when we construct our new audio track.
5.) Now in your audio software you should have your original error-filled audio track and the new clips that we just captured. This part can be painstaking if you're not familiar with audio editing softwares, but as you'll learn, it's really not that hard.
You're going to look at your original audio track and compare it to your new working audio clips. You should be able to notice where those new clips are supposed to go by looking at the identical (or close to identical) waveform shapes in your original audio track. The two should correspond with one another. If you don't understand what I mean right now, you will when you start playing around with the audio. This is why marking times is very important.
Take your new clips and split them up if you haven't already, that way you can drag them around and edit them separately from one another. Essentially your going to line these new clips up with original and then replace the original parts with new ones.
We need to get this as precise as possible, so start off by getting them as close as you can with your naked eye, and then use a zoom tool to zoom in as much as possible so that you can get them lined up PERFECTLY, or at least extremely close. In some softwares you can just drag these new clips on top of the old track, but most of the time you will need to actually cut out the old piece and replace it with the new one. In doing this, zoom in and make sure that you are NOT cutting out a bigger space than your new clip will fill - otherwise you will have small gaps in your audio.
VERY IMPORTANT: Also make sure that this new audio track starts at the EXACT SAME time as your original - otherwise your new audio will be out of sync.
I know this part can really suck if you're not used to audio editing, but at this point, there is little other choice.
6.) Once you are done with this, export your newly pieced together audio track.
7.) Now open iMovie and create a NEW project. Re-import the video that you exported earlier that has the messed up audio. This might take a while, so just be patient.
8.) Then right click the clip and select "Detach Audio". This will do just that - allowing you to edit the audio separately from the video. Now delete this audio.
9.) Now, import the new, perfect audio track that we just made and make sure that it starts at the start of the project. Make sure it's in sync and that everything works.
Now just export your new video with the working audio and you should be done. Since we have given iMovie the audio with no editing actually being done in iMovie, it does not have to generate its own audio now and you should have absolutely no errors now - unless there is some that you forgot to take out earlier.
YOU'RE FINALLY DONE!!!
I know this entire process *****, but if you're that far into your project, there is little else that you can do. Now you've learned your lesson:
DON'T USE IMOVIE EVER AGAIN.
I hope this helped!

Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

It all depends on the codec the file uses, Karli.
What model of camcorder is this video coming from?
Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
BY THE WAY, KARLI--
PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion.

No audio video streams upon import of .mov files?

Hi... recently upgraded OS onto Intel 240 GB SSD. Running Widows 7 64 bit, clean re-install, 24 GB RAM, NIVIDIA Quadro FX 4800. I have been trying to optimize the system for maximum GPU accelerated effects while also taking advantage of the high speed read and write of my disk. OS runs on SSD, Adobe media cache on separate 2 TB eSATA connection, Media stored on external drive USB 3.0. Without getting into the fine details this is a snapshot of my workflow.
The few problems I am encountering are some .mov files cannot be imported to PP. Error reads no audio or video stream in the files. I suspected metadata issues so tried to import with media browser and still no luck. These files worked perfectly before I began surgery 2 days ago on my computer. I have installed the latest version of quicktime and yet to no avail. Any recommendations here regarding my issue with imports or suggestions to benefit from my hardware would be appreciated.

MOV is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

.Mov files in CC : The File Has no Audio or Video Streams

I recently updated premier to CC , since i have issues iimporting any .mov files at all.
The specific ones Im trying for my current project are exports from AE , rendered lossless animation .mov , worked fine in CS6 , will play in quicktime and other generic's but always getting the The FIle Has no Audio or Video Streams message when trying to import into a project.
Quicktime is updated so I can't understand why the won't play, is this a CC bug ?
i go back to cs6 on my other comp they open fine...
Ive seen a few topics on this none with a resolution and most of those where from cam's, this is an export from AE, anyone able to help this is stopping me from working atm ......
troy

I can verify that Apple screen recordings without audio do not import into any Adobe premeier.
Details on screen recording from Gspot v2.70a:
H.264
qt : Apple QuickTime (.MOV/QT)
File Type: QuickTime (.MOV)
Mime Type: video/quicktime
Len: 1:03.083
Frms: 1,521
Qf: 0.153
Frames/s: 20.000
wx: 1280 x 800
sar: 1.600 (8:5)
However Apple (MAC OSX) screen recordings WITH audio will import.
I would think this should be fixable with hotfixes...
If you (adobe staff) have access to macbook pros 2012 or 2013 models, open quick time pro, do a screen recording, make sure no audio is recording, just your screen movements.. then export to 1080p video (mov is only option).. then on a windows PC try to import that file into adobe premiere. The file will play perfectly fine natively in windows with any player so long as a H264 decoder is available on that system... the problem here is Adobe Premiere. Not the users system.
Edit:
To help those with this issue.. just make sure when you render your mov that you have ANY kind of audio in it.. and just remove the audio track once imported into premiere. I know it's frustrating and you would think something as simple as not having an audio track wouldn't break premiere but alas... we have to work around the shortcomings until they decide to fix it.. just like the VFR issue in premiere.

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

.mov file in Quicktime: Audio OK, Video not OK

Reposting this as a new topic, since it was buried in the other thread.
I have a small HD video camera that records .mov files to an SD flash card.
I get audio, but no video. The Quicktime movie inspector says the format is "mbarella AVC encoder 3avcCM@" - then an apparently random selection of symbols that I don't see on my keyboard..
I have bought and activated the Quicktime pro key.
The movie properties window tells me the Video Track in in H.264 format - but I use H.264 a lot, and never have a problem with it.
It's not just one file that is problematic - every video file fails to show on my laptop, though the video files play back without a problem on the camera.
I can't open the file in Quicktime, Real Player, VLC, itunes, iphoto, MPEG Stream clip, or Final cut. I used to be able to open files from this camera on my laptop, but suspect I have upgraded and lost functionality. Saved files that used to play in Quicktime and in iphoto now do not play video - audio is fine, but not video.
I have downloaded the Perian add-on, but that has made no difference.
Any thoughts? I can send a short test file from the camera if necessary.
Hope you have a good weekend!
Best wishes
R

Hi Jon - test file sent by email to your address in profile, from my rob....{at}gmail address.
File received and examined. Appears to be a codec problem. Suspect the camera may be using a custom/hybrid encoder. QT is very touchy about such things. Was able to open and play it in both older version of VLC and new version which installed today. Tried transcoding the result to standard MP4 file but the results were not satisfactory.
Test.mp4
If you download/play this test, you will note that the pan portion is very poorly rendered. Stepping the clip frame-by-frame seems to display some frames out of their natural order. In addition, the clip looses two seconds of playback time as if some frames were either lost during the transcode or the original file had a varying frame rate which was reset to a fixed rate and time reference in the transcoded file. This seems to be confirmed by analysis of the HandBrake conversion below...
FILE0055.m4v
Used a custom TV preset I happen to be testing in latest Snow Leopard version of HandBrake to create the file which does play back the same as you original file in the VLC player. This preset, among other things, duplicates the original frame rate variations. In this case, analysis indicates the frame rate excursion to be 29.970 -6.008/+30.280 fps which plays the clip in 12.07 seconds and is only 0.03 seconds longer than your original file. The downside to this is the fact that the preset as used here doubles the video rate and quadruples the audio data rate.
You might perform a search to see if a QT component is required for proper viewing of camera content. (I.e., a component that was originally installed on the system that used to play the files--e.g., check software disc that may have come with the camera.) Otherwise, my only suggestion would be to download the latest version of HandBrake and see if you can transcode the files for playback using the standard or currently configured component set installed on your system.
Good Luck,

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s Solutions?

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s. Any ideas?

Question: Is all the source footage shot in 16 bit audio or is some also shot in 12 bit?
http://docs.info.apple.com/article.html?artnum=42973
http://www.kenstone.net/fcphomepage/idvd_6stone.html
http://docs.info.apple.com/article.html?artnum=93006
http://docs.info.apple.com/article.html?artnum=303550
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/397.html
http://docs.info.apple.com/article.html?artnum=61636
http://docs.info.apple.com/article.html?artnum=302925

*.mov files play on ipad without audio

I have recently transferred some *.mov files from my PC to iPad. These files play perfectly well on PC in both Quicktime Player and Windows Media Player. However, when I try to play them on iPad, I get video only (no sound). I have latest versions of all softwares so cannot figure out why iPad is not playing audio of only these files. I had some old *.mov files on my iPad which play perfectly well (both video and audio) so how can I fix this problem.

I had some WMV files which I had converted to *.MOV using AVS Video Converter. I have compared the properties of old *.MOV files which play on iPad perfectly well (using QuickTime Player) with the properties of the newly-transferred files and they are exactly the same in every aspect. Is it possible that because of low memory (about 4GB) left on iPad after the new files' transfer, the audio is not playing on iPad?

MOV files audio

Similar Messages

Maybe you are looking for