Mov files dropping video and audio frames CC 2014

I have been experiencing playback issues in Premiere and just got off the phone with Adobe support. It appears that there is known issue with .mov files dropping video and audio frames that will likely be fixed in the next release. My entire project is .mov files and we need to get some serious editing done to complete a rough cut of our film. As a bandaid, we have reverted the playback renderer to software only and I am experimenting with different preview file formats to see if I will have less dropped frames. I want to avoid converting my media from mov files at all costs as this would be very time consuming with over 100 hours of footage.
Please let me know if you have any other workarounds!
Sandy
Windows 7
Adobe CC 2014 (up to date)
Nvidia Quadro K2000 (driver up to date)
16 GB RAM

Welcome to the forum.
Unfortunately, MOV can hold all sorts of "stuff." See this article for some more detail: http://forums.adobe.com/thread/440037?tstart=0
Can you let us know what is inside that MOV "wrapper?"
Thanks, and good luck,
Hunt

Similar Messages

Can I present a keynote file with video and audio over the internet? If so how?

I have tried this with Adobe Connect but it' not ideal since the frame rates drop dramatically and there is no sound. I can upload powerpoint files directly to Adobe connect but there is no option to upload Keynote files. I know I can export Keynote fiels to power point but this work-around is ugly.
-Idotel

Keynote takes over complete control of the graphics system to play the presentation, therefore the display that is not showing the presentation will be black.
The only time the monitor not showing the presentation can show video, is when using Presenter Diisplay in Keynote.

Video and Audio Mismatch

Working a large project, and after rendering, the audio and video does not match? Help please

So you wouldn´t recommend working with mp3 Audio Format?
Nick doesn't, I don't, nor does any other FCP editor that knows the application or anyone else who has read the user's manual:
"Recommended Audio File Formats
For best performance, use one of the following uncompressed audio file formats when editing in Final Cut Pro:
• AIFF or AIFC containing uncompressed audio
• WAVE or Broadcast Wave Format (BWF) containing uncompressed audio
• Sound Designer II
• Single-track or multitrack QuickTime movies containing uncompressed audio
Natively, Final Cut Pro captures to QuickTime movie files with one or more audio tracks.
Audio Formats to Avoid
The following formats and audio data formats should be avoided when editing in Final Cut Pro because they require real-time processing for playback:
• Any file containing compressed formats such as MP3, AAC, and Apple Lossless Codec
• QuickTime movies containing compressed audio, such as MPEG-4 and H.264 files
• Multiplexed video and audio streams such as MPEG-2 program streams and DV Stream files (This is one of the formats iMovie can create during capture.)"
-DH

Video and Audio not synced on .mov file in final cut, but perfect in QT!

I recently just captured a miniDV tape onto final cut. I captured it in 23.98fps. After I captured it and opened it up in final cut's sequence, the video and audio was not synced at all. it's way off and even when i try to move the audio around on the timeline and get one voice synced up, about a minute into the video it's off again.
i tried opening the video in quick time under the captured scratch folder, and when it plays in quick time, it's perfect. there is no sync problem at all. only when i open it in final cut is there a problem.
does anyone know how to fix this or what is going wrong?!
HELP ME

well i mean we recorded it in 24PA, which is what we've been doing for this project of ours. And when we go to capture in final cut we choose the Advanced Pull Down setting. So in the end, our video is in 23.98 fps.
I just thought I'd mention that just to give more details. idk if it's helpful or not

How to transfer video and audio files from windows PC to new ipad?

How to transfer video and audio files from windows PC to new ipad?

iTunes: Syncing media content to iOS devices and iPod
Sync with iTunes.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on all of the albums, artists, playlists that you want to sync
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
Follow the same procedure for Movies.

Cutting and saving individual video and audio files from a clip

I have to cut 201 individual video and audio files for separate scenes from an 11-minute animated episode and save them as separate MP4 video and MP3 audio files. What is the most efficient way to do this?

Without knowing more about your project, it's hard to even guess at the most efficient workflow.
Like: Do these clips have audio or are you adding it? What format are these clips? What is the intended delivery for the 11 minute movie?
As a general matter, one creates an event, imports clips to it. Then organizes the clips according to the needs of job, using keyword collections and ratings. Then creates a project and starts a rough cut by marking ranges in the event browser and editing to the time line. Some people start with the music, making that the primary storyline mark where they want the edit to be and cut to that.
Upon finishing, one can choose one or more of the "destination" presets. It's possible to export Audio only or Video only or both. MP3 is one of the audio choices. Some of the presets are MP4. If you want possibly better quality and more control, export the files as master files and encode in Compressor.
Good luck.
Russ

I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync. They work fine when played in Quicktime.

Hello,
I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program. It appears to work fine in Quicktime.
Thanks in advance.

mbgoodwi
Thanks for the reply. This is the plan.
Open Premiere Elements 12/12.1 to the Expert workspace.
In the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, select the project preset
NTSC
AVCHD
AVCHD LITE 720p30
OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
There should be no colored line over the content if the project preset matches the video properties. But, if you do see
that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
the Render button above the Timeline.
Do your video/audio now play back in the Edit area monitor in sync?
Please let us know the result, and then we will decide what next.
Thanks.
ATR

Video and Audio 2 frames out of sync: DVCPRO HD 720p60. Can you help me pl?

Hi,
I'm capturing DVCPRO HD video 720p60 [shooted with a Panasonic VARICAM (AJ-HDC27)].
I'm using a Panasonic AJ-HD1200A videorecorder (by the Firewire port):
on the Final Cut Pro (5.1) timeline, video and audio are out of sync (audio comes two frames before video). Why?
Can someone help me please?
Thanks a lot.
ste
Message was edited by: stebianchi
Message was edited by: stebianchi

This is normal when capturing DVCPRO HD via firewire. Happens to me all the time. I simply slip the audio back two frames when I drop them into the timeline. Only way to fix this is to get an HD capture card like the Kona LHe or Decklink Extreme and capture the footage via HD SDI as DVCPRO HD. Doing that will eliminate the sync issue.
It is all FIREWIRE's fault...
Shane

TS3623 I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at top when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix?

I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at highest when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix? I rented movie within week and it worked. All previews of movies and show also works.

I have a suspicion that the problem is not in the recording device itelf, but rather in the playback-software, which is struggling with an unfamiliar audio format/codec/whatever-it's-called... I opened the file in QuickTime Player 7 (7.6.6) and selected "Show Movie Properties" and it says:
"Video Track: H.264
Sound Track: Integer (Little Endian)"
All current Mac systems support Integer (both Big and Little Endian) audio natively. The fact you can hear anything at all proves that the audio is playing back. The most likely problem would be a malfunction associated with the mic pickup.

Video and audio files hosted on your site

It would be great to be able to host your own video and audio files and not have to rely on YouTube or Vimeo. Design a widget to for ease of use.

Yes, you can easily work with only audio or only video from a video clip in Premiere Elements.
How you do this depends on which version of the program you are using.

Linked video and audio do not move together on timeline

Hello, I have been working in a project for a couple of days and cannot find out why the video and audio do not move together when one of them is dragged laterally on the timeline. They are linked yet do not move together. I seem to remember one of the first clips I dragged down to the timeline did what it should but they do not behave as they should. If I click on both clips the only option is unlink. When I move one part in the timeline it shows me how much they are out of sync.Any ideas?
~Grant

I am not able to download mp4 files (video and audio) to iTunes since I updated to iTunes 11. Thanks for your help.

I am not able to download mp4 files (video and audio) to iTunes since I updated to iTunes 11. Thanks for your help.

Thank you for clarifying. Your question is in your browser, not in iTunes. Each download link is different, and it has nothing to do with the File menu. You can save media files by secondary-clicking on the link to the media file and selecting Save File to "[your downloads folder".

Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

You may need a 3rd party application to view the DVD in a wWindows format such as
http://flip4mac-3.en.softonic.com/mac
https://www.macupdate.com/app/iphone/5758/vlc-media-player

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

Scrol bar to slow down a video and audio file

Hello,
I need a scrol bar to slow down a video file (video and audio)
Thank you.

you want a video to play at something other than its native framerate?
if yes, you can't easily do that with an flvplayback component. you'll need to separate the audio and visual parts of your video and had them to a movieclip timeline. then you'll need to customize the playback speed of that movieclip.
you can use the following to play any movieclip (forward or backward) at any speed:
function playF(mc:MovieClip, m:int, n:int, fps:int):void {
    var playFFF2:Function = function(mc:MovieClip):void {
        trace(getTimer(),mc.currentFrame);
        if (mc.m<mc.n) {
            mc.nextFrame();
        } else {
            mc.prevFrame();
        if (mc.currentFrame == mc.n) {
            clearInterval(mc.int);
        //updateAfterEvent();
    mc.m = m;
    mc.n = n;
    mc.fps = fps;
    mc.gotoAndStop(mc.m);
    clearInterval(mc.int);
    mc.int = setInterval(playFFF2, 1000/mc.fps, mc);
// and to stop it:
function stopF(mc:MovieClip):void {
    clearInterval(mc.int);

Mov files dropping video and audio frames CC 2014

Similar Messages

Maybe you are looking for