MOV files not recognized for import

I must have had an old or defective QuickTime player on my editing system when I loaded Adobe CS4. I do not have a QuickTime option for import. I updated the QuickTime Player and it is now working properly. How do I get Adobe Premiere Pro CS4 to now recognize my MotionLoops MOV files? Hopefully without reloading CS4!

Bill, that's strange indeed. Can you successfully play the MotionLoops files directly in the QuickTime player?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Similar Messages

Camera RAW, file not recognized after import and migration, Aperture 2.1

Hi,
I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
Thanks,
Greg

Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
please help! I've got 987 raw wedding photos to process!!
I dont know what to do!

.MOV file not recognized

Apologies if this issue has been addressed before...
Today I discovered that Finder is not recognizing several of my .MOV files. These are usually displayed as a small icon (image) from the video. Nor can these videos be played in QuickTime. I sincerely hope this can be resolved as the masters were deleted from my iPhone 5 upon upload from Image Capture.
My specs:
MacBook Pro OSX 10.9.5
2.5 GHZ Intel Core i5
8 GB RAM
QuickTime 10.3
Many thanks for your input/suggestions.
Best,
Brandt

Hi,
there are two possibilities: The first one is, that the files are broken and thus can't be viewed. The second possibility is that the .mov files are using a codec your Quicktime Player can't display. You have to check this first. Open one of your .mov files with a tool like Media Inspector (http://mediainspector.massanti.com). This will show a lot of details of the movie clip including the used codec.
However, if you have shot the footage with your iPhone 5 the codec should be H.264 (or AVC, which is just another name for the same). Quicktime should be able to view it.
Please post more details.
Yours,
Guenther

.MOV Files Not Recognized

Hi All.
I've read as many threads on this subject as I can stand. I have .mov files that I'm assuming are capture scratch from a former employee that were created in 2004. The only problem is that Quicktime, Final Cut Pro, Compressor, and Visual Hub don't accept these files. So, I can't open them, use them in Final Cut, or convert them. I've tried downloading Perian and allowing older codecs in QT. Neither of these helped. Does anyone know why this would happen and how I can fix it so that I can send these files to someone to make into PAL versions for foreign distribution? I don't know what codec they are, b/c I can't open them to get that information. As I said, they're in the "capture scratch" folder for the project, so I'm assuming they were digitized using a sony mini dv deck or a panasonic dvx 100a camera into Final Cut Pro HD 4.5 on a PowerMac G5, because that's the equipment they had at the time, and in fact we still have. The only thing different is I upgraded to Leopard, but my boss wouldn't splurge for Final Cut 6 or Final Cut Studio 2. I'm wondering if that has anything to do with it.
Thanks so much!

Bill, that's strange indeed. Can you successfully play the MotionLoops files directly in the QuickTime player?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Xml files not available for import

Is there a way to open xml files from fcp 7 in fcp x without purchasing the 3rd party ap 7 to x? I read that some of the past updates were supposed to resolve this issue but it has yet to work for me. I am runnin fcp x 10.0.7 on OS X 10.7.5. The files that I saved to my desktop are not selectable in the import xml option in fcp x. Please help!!

Is there a way to open xml files from fcp 7 in fcp x without purchasing the 3rd party ap 7 to x?
No. FCPX uses a quite different XML structure. You need 7toX.

Exporting .Mov files at 24fps for Final Cut Pro 5

I work at an animation production house and we're trying to export .mov files from QT 7.1.2 at 24fps so they won't have to be rendered in a FCP project which is a 720p project with a frame size of 1280x720, we're experimenting with two codecs. We're using Motion Jpeg A and Photo Jpeg, selecting 24fps but for some reason they import into FCP 5 at 10fps. It's as though QT isn't outputting accurate 24fps .mov files. When I export .mov files from FCP they import back into FCP without having to be rendered. What's the difference between the ones exported from QT vs. the .mov files exported from FCP. We're using the exact same settings and files....? The reason we need to use QT to do this is because it needs to be a somewhat automated process (lots of stills to work with) and our PA's are working on Windows with QT only.

You should post your inquiry at Final Cut Pro section for better support. Anyway, Final Cut Pro does not always recognize the frame rate correctly, depending on which application (and possibly which codec) you used to compress video. For example, Snapz Pro X and Adobe After Effects don't get along with Final Cut Pro in this respect. Furthermore, compressing video in H.264 will be a bad idea. So simply adjust the size of Canvas so that it won't cover the whole screen. In this way, you can even replay video on Canvas and even send it for final production.

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed.

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed. Anyone know the fix?

To me it seems related to your Adobe Camera Raw (ACR) converter. Clue inhere is you only miss the Raw files and have no problems in seeing other formats like jpeg and tiff.
The screenshot you delivered is from the wrong library, however, this same library (the one on system level) also is the location where you should be able to view the correct version of your ACR plugin. The path: library (same as per your screenshot)/Application support/ Adobe/ Plug ins/ CS6/ File Formats. inhere should be only one version of Camera Raw (called: "Camera Raw.plugin") and this should show version 8.3 (141).
I'm not sure about your bridge version number, Bridge 5 comes with PSCS6 but my most recent version of Bridge is 5.0.2.4.
Anyway, if you have only one ACR (8.3) installed in the above mentioned path then you might want to try to delete the Bridge plist file and Bridge cache file manually.
For this you have to Quit Bridge and find the user library (by default hidden, use menu Go in Finder and press option key to reveal).
Inhere find the plist file (user(your user name) / library / Preferences and inhere find and manually delete the file called: "com.adobe.bridge5.plist"
The in same user library find Bridge Cache. User/Library/Caches/Adobe/Bridge CS6. Inhere are 2 files, the adobe Bridge plug in cache and the folder called Cache. delete (or move outside libray) both items.
The restart Bridge (If needed also again hold option key to reset preferences) and this will create fresh files for the previous deleted items, leaving you with an almost out of the box factory set version of Bridge.

Install error during make of Pro*/C++ - file not recognized:

Say, anyone seen this error during install? The file or directory "proc" is indeed missing... is this a known shortcoming of this release? Can these make errors be ignored?
Thanks in advance
Dennis
Starting install Link Phase of component Oracle Internet Directory Client Common Files
Starting install Link Phase of component Required Support Files
Starting install Link Phase of component Oracle Code Editor
Starting install Link Phase of component Oracle Database User Interface
Starting install Link Phase of component Oracle Ultra Search Server Rdbms
Starting install Link Phase of component Enterprise Manager Minimal Integration
Starting install Link Phase of component Object Type Translator
Starting install Link Phase of component Pro*C/C++
Calling Action unixActions10.1.0.3.0 make
     installMakePath = /usr/bin/make
     installMakeFileName = /app/oracle/OraHome_1/precomp/lib/ins_precomp.mk
     installTarget = relink
     installArguments = ORACLE_HOME=/app/oracle/OraHome_1,EXENAME=proc,
     undoMakeFileName = null
     undoTarget = null
     undoArguments = null
     logFile = /app/oracle/OraHome_1/install/make.log
     progMsg = Linking proc
The output of this make operation is also available at: '/app/oracle/OraHome_1/install/make.log'
Start output from spawned process:
Linking /app/oracle/OraHome_1/precomp/lib/proc
/app/oracle/OraHome_1/lib/s0main.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
/bin/chmod: failed to get attributes of `/app/oracle/OraHome_1/precomp/lib/proc': No such file or directory
make: *** [app/oracle/OraHome_1/precomp/lib/proc] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Exception handling set to prompt user with options to Retry Ignore
User Choice: User selected to stop installation of all components.
Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Unable to read the list of homes from the inventory.

If your library is in the standard layout of an iTunes folder containing an iTunes Media folder (and you've already copied over the media) then you can simply copy the iTunes library files and album artwork folder across to the new machine recreating the same layout. If the media folder has been split out from the main iTunes folder then see make a split library portable for a way to get the library into a portable form, after which you can copy over the library files.
tt2

Can't play mov files after update for MAC OS 10.6.8. Can't edit in Final cut anymore!

can't play mov files after update for MAC OS 10.6.8. Can't edit in Final cut anymore!. SHould i by a registration code for QT 7 Pro? I can't play mov files at all.. they were okay in my final cut time line. Now i can't see them!!! I can't import movies from my camera!!!
Help from Brazil!!!
Tks

David,
tks for your help !!!
Hi people, first, tks for Birdman308 for his link
https://www.hightail.com/dl?phi_action=app/orchestrateDownload&rurl=https%3A%2F% 2Fwww.hightail.com%2Ftransfer.php%3Faction%3Dbatch_download%26batch_id%3DOGhkZ28 xeWFiV3dYRHRVag
and makbookpro as well for his link
http://blog.lib.umn.edu/mcfa0086/discretecosine/164630.html
Now i can back to work!!!

Burning a QT .mov file to CD for Windows use.

I have tried burning a QT .mov file to CD for Windows use with Finder and with Toast T 6, Mac & PC option. I burned the QT .mov file and Windows QT Installer on to the CD with both above apps.. However, when I try to read the CD on a Windows PC, it doesn't see the QT .mov file. It did see the Windows QT Installer and you could use it to install QT for Windows on a Windows PC. What is up with the QT .mov file not showing up on the Windows PC?
Thanks!!!
G5 Dual 2.0Ghz Power Mac Mac OS X (10.4.6) 2.5MB RAM

OS 10.4.6 Disk Utility does give you the option for multisession burning. I used Toast T 6 and it's also suppose to support multisession burns. However, since you mentioned it, the file that you could see (QT Windows Installer) on the Windows PC was the second file I burned. The first file was the QT .mov which you couldn't see on the Windows PC. Maybe Toast T 6 has the same limitations as ver. 5? The only thing I can do is try to reburn the CD all in one session, i.e., with the QT Windows Installer and QT .mov file on the same session and see if that works. What do you think?

Mp3-file not recognized on my Samsung SGH-E720 mobile phone

hey,
i recently ripped my audiocd's in iTunes. some files can't be played back on my mobile phone: it says "file not recognized". others can be played. what am i doing wrong, or is it just the type of audiocd i ripped?
grtz
imac g5 17" Mac OS X (10.4.8) broken for the moment ...

hey,
i recently ripped my audiocd's in iTunes. some files can't be played back on my mobile phone: it says "file not recognized". others can be played. what am i doing wrong, or is it just the type of audiocd i ripped?
grtz
imac g5 17" Mac OS X (10.4.8) broken for the moment ...

UIXJSP App built off BC4J Project JBO Excep XML File not found for the Container

Running JDEV 9.0.3 build 960
Created a new project in folder "UIX JSP"
"UIX JSP" note the space!
Create a default UIX JSP Application based on existing BC4J Project
When running a JSP - Get a JBO Error complaining that the XML File not found for the Container
If I recreate the project with name UIX_JSP problem does not occur.

I logged a bug on this.

XML File not found for the Container model.cpx

I can run my application from JDeveloper without receiving the error. But when I deploy the application I get the following:
500 Internal Server Error
oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container model.cpx at oracle.jbo.mom.DefinitionManager.loadProjectDefinition(DefinitionManager.java:751) at oracle.jbo.uicli.mom.JUMetaObjectManager.createPool(JUMetaObjectManager.java:457) at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:541) at oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(BC4JRequestProcessor.java:233) at oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(BC4JRequestProcessor.java:123) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:234) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292) at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:721) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803) at java.lang.Thread.run(Thread.java:479)
Any Ideas?

Hi,
please explicitly "make" the project. One reason for this problem could be that the model.cpx isn't created properly. Select the model project and compile the complete project before deploying it. Sometimes it helps to clear the "class" directory of the project on teh file system before re-compiling
Frank

"XML File not found for the Container DataBindings.cpx" error after deploy

Hello,
I have a problem with my JSP-Javaproject. Local works all fine but when i deploy my project to a Oracle Aplication Server i allway get this XML-File-Not-found exception:
oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container DataBindings.cpx
In my EAR-File the DataBindings.cpx is at:
\WEB-INF\classes\
My JSP-File:
<jbo:ApplicationModule id="AippackageModule" definition="DataBindings.DataModule" releasemode="Stateful" />
My web.xml:
<context-param>
<param-name>CpxFileName</param-name>
<param-value>DataBindings</param-value>
</context-param>
My DataBindings.cpx:
<?xml version='1.0' encoding='windows-1252' ?>
<Application xmlns="http://xmlns.oracle.com/adfm/application" id="DataBindings"
Package="" ClientType="Generic">
<pageMap>
</pageMap>
<pageDefinitionUsages>
<page id="eonerrorPageDef"
path="de.avacon.ahb.system.tools.pageDefs.eonerrorPageDef"/>
</pageDefinitionUsages>
<dataControlUsages>
<BC4JDataControl Configuration="AppModuleLocal"
Package="model.data"
xmlns="http://xmlns.oracle.com/adfm/datacontrol"
id="DataModule">
<Parameters/>
</BC4JDataControl>
</dataControlUsages>
</Application>
What can i do?
Thanks, steve

Adding the dependency in the ViewController fixed this for me.
I'm using two AppModules in the controller and the second one wasn't being picked up.
I was able to fix this by:
Go to the Project Properties, select Dependencies, edit the Dependent Projects and Archives, find the model that's failing and add a tick in the Build Output box.
The model should now be picked up in the ViewController's DataBindings.cpx source file, though I did have to restart JDev for this to be picked up.
HTH
Phil

XML File not Found for the Container BC4J.cpx

Hi,
Have following error when I start a BC4J-JSP/Struts application (with Embedded and standalone OC4J) :
500 Internal Server Error
oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container BC4J.cpx
     oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition(java.lang.String)
          DefinitionManager.java:751
     oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition()
          DefinitionManager.java:793
     void oracle.jbo.mom.DefinitionManager.initManager()
          DefinitionManager.java:137
     void oracle.jbo.uicli.mom.JUMetaObjectManager.<init>()
          JUMetaObjectManager.java:57
     oracle.jbo.uicli.mom.JUMetaObjectManager oracle.jbo.uicli.mom.JUMetaObjectManager.getJUMom()
          JUMetaObjectManager.java:131
     oracle.jbo.common.ampool.SessionCookie oracle.jbo.http.HttpContainer.findSessionCookie(javax.servlet.http.HttpSession, java.lang.String, java.lang.String, java.util.Properties)
          HttpContainer.java:541
     boolean oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(oracle.jbo.html.struts11.BC4JActionMapping, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          BC4JRequestProcessor.java:222
     org.apache.struts.action.ActionMapping oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
          BC4JRequestProcessor.java:124
     void org.apache.struts.action.RequestProcessor.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          RequestProcessor.java:234
     void org.apache.struts.action.ActionServlet.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          ActionServlet.java:1292
     void org.apache.struts.action.ActionServlet.doGet(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          ActionServlet.java:492
     void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          HttpServlet.java:740
     void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
          HttpServlet.java:853
     void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
          ServletRequestDispatcher.java:721
     void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
          ServletRequestDispatcher.java:306
     boolean com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.ApplicationServerThread, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletRequest, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
          HttpRequestHandler.java:767
     void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(java.lang.Thread)
          HttpRequestHandler.java:259
     void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run()
          HttpRequestHandler.java:106
     void EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run()
          PooledExecutor.java:803
     void java.lang.Thread.run()
          Thread.java:484
Then I make a Reload and it's ok.
I have a Workspace with two Projects :
BC4J.jpr for Businnes Components
Web.jpr for JSP Struts
In /classes I have the file Web.cpx, but no BC4J.cpx.
From which does this name come ? Can I change this name ?
Thanks
Yves

I found this on Metalink...
JBO-26001: NoXMLFileException
Cause: Could not open the named XML file for read.
The following is from Note 137429.1. Hope this helps.
Raja.
JBO-26001: NoXMLFileException
Cause: Could not open the named XML file for read.
Action: 1. Make sure that the file is present. In particular, if the file is to be found in a zip/jar file, make sure that the Zip/JAR file is included in the CLASSPATH.
2. This error is also reported if the name of the XML file does not match the object Name specified in the XML file. If the file system support case insensitive file names (e.g., Windows NT), make sure that the file name matches the object Name in the XML file in case-sensitive fashion.
3. For a .JPX file, this error is reported if the JPX file is missing the JboProject XML tag. Check the JPX file to make sure that the valid tag is in there.
4. One XML file may be extending another XML file (specified by the Extends element in this XML file). This error is reported if the base XML file is not found.
5. When loading the XML file for a package (JboPackage tag), this error is reported if some unexpected error occurs while loading a containee.
In all of the above cases, a more descriptive message may be printed on Diagnostic. If you are not seeing Diagnostic messages, you can run your application with Diagnostic turned on, as in "java -Djbo.debugoutput=console ...", to see Diagnostic messages.

MOV files not recognized for import

Similar Messages

Maybe you are looking for