MOV. files will not import from external hard drive to iMac.

Do I have to convert MOV files somehow to be able to import them into an iMac from an external hard drive?
The files were moved from MacBookPro to hard drive. They play fine on external hard drive but won't import into iMac which says file format not recognised.

The file plays on my desktop and from the external hard drive, but I converted one file to an MP4 which then imported to iPhoto. Any recommendations on how to convert to MP4 files in bulk?

Similar Messages

Itunes will not load from external hard drive

My Itunes will not load from my external harddrive. worked fine a few days ago.

I do not have any exclamation points - missing songs do not show at all. I had to click 'locate files' when I opened iTunes after reorganizing, since there was nothing there anymore

How do I copy iTunes from external hard drive to iMac?

How do I copy iTunes from external
Hard drive to iMac?

if your main library is on your external, then when not connected, you wont have access to it.
so first decide, where do you want to keep the files.
E.g. In my case, I keep my files on "C:\iTunes Music".
I have a backup on external "Z:\iTunes Backup". If I format my laptop, this is how I restore everything.
Edit -> Preferences -> Advanced.
The iTunes music folder in selects as "C:\iTunes Music"
I have checked Keep iTunes Music Folder Organized, and also Copy Files to iTunes Music folder when adding to ibrary". Click OK to save and close preferences.
My iTunes list is now empty. I go to file, and select "Add Folder to Library". From that window, I select "Z:\iTunes Backup". iTunes then copies everything from the backup to "C:\iTunes Music". For me, backup is backup, I dont need it to play music.
Now decide this. If you do not want to keep music on C:, but want to only connect the external to update music on your ipod, do this:
In preferences, set iTunes Music folder as "Z:\iTunes Backup", and uncheck Copy files to iTunes Music folder, since they are already there. Then in files, select Add folder to library again to build and update the list.

File not found after importing from external hard drive

I have been importing music from an external hard drive into my Itunes account. Some of the songs transfer fine, but some of them show up in Itunes as being imported, but when I go to listen to them I get a file not found message because the original file cannot be found. If I have the hard drive plugged in there is no problem, but without it I get that message.
Any advice? I"d really like to get all music set up in Itunes.

Search Amazon - Davie Pogue I believe has released the missing manual for Leopard - it is a good general reference Liz Castro did a great book on iPhoto 05 but has not done one for '08 as of now
The iPhoto Help section is very helpful
Reading this forum will teach you a lot about iPhoto
If you have not taken the iPhoto tutorials yet you should - http://www.apple.com/support/iphoto/
Make mistakes and fix them - that's the way I do it
LN

How to open files (NOT copy) from external hard drive

Hello there,
I have a Western Digital My Passport external harddrive. I bought the hard drive so I could take stuff like my music off my laptop harddrive, free up space and make it run smoother.
Problem is, every time I select a music file on the ex harddrive to play in itunes, the file is copied to the laptop harddrive! Completely defeats the purpose.
Does anyone know how to stop my laptop from copying music files and just get it to play files from the external hard drive? I have looked and looked but to no avail - this is my first Mac and it is the one issue that really bugs me.
Any help will be much appreciated!
N.B. it doesn't seem to do this with other file types (documents etc.) just music files/files supported by itunes.

How are you selecting the music files? I have my entire music library on an external drive. If you go to preferences in iTunes, their is an option to select where your music library resides. I think it is under advance but I'm not sure since I don't have access to my mac.
Glor

How do I import music files to new computer from external hard drive containing them

Have an older computer(G5 iMac) with Tiger 10.4.11 and iTunes that crashed. Have that computer and older version of iTunes residing on an external hard drive. I want to import music to new comptuer with newer version of iTunes. External hard drive is partitioned with just iTunes section. Any one done this before?

If you want to use the old iTunes library that you have from the ext HD then just drag the iTunes folder to the new Mac.
By default the iTunes folder Is Located - HD>Users>Your Account>Music>iTunes - if the internal HD has no iTunes library then just replace the iTunes folder with the one from the ext HD.
Launch iTunes with the 'option' key down and point iTunes to the iTunes Library that you want to open. It will remember the next time.
MJ

Importing from external hard-drive without all the clutter

greetings...i need to import my saved iphoto library from my external hard-drive back to my new computer's iphoto library...how can i best do this without bringing along all the clutter (copies or originals i don't want)...i dropped my entire saved library into my computer's library but ended up with thousands of versions i do not want (i just want the versions i last had-complete with typed information or labeling)...certainly one doesnt' have to go through the whole imported library and delete all the copies and originals they no longer want (that would take a week!)
thanks,
here's what i see on my external hard-drive:
(what should i drag over?)
AlbumData.xml
Data (Folder)
Dir.data
iPhoto.ipspot
iPhotoLock.data
iPod Photo Cache (Folder)
Library.data
Library.iPhoto
Library6.iPhoto
Modified (Folder)
Originals (Folder)
Thumb32Segment.data
Thumb64Segment.data
ThumbJPGSegment.data

(what should i drag over?)
All of it, as a unit.
To restore an iPhoto Library drag the iPhoto Library Folder to the Pictures Folder and start iPhoto. There's no importing involved.
All of the "clutter" is necessary for running iPhoto. If you don't want it, use a different app.
It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss
Regards
TD

Importing FROM external hard drive to new internal hard drive

How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?

lksj wrote:
How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?
assuming you moved the whole iTunes folder to your new internal HD, try this:
launch iTunes with the options key pressed. this window will appear
click +choose library+ and navigate to the _iTunes library file_ on your internal HD.
any luck ?

Access files on mac-mini from external hard drives hooked to PC...

Have two external hard drives hooked up to my PC. I am in the process of daisy-chaining (via firewire cable) from the one external-Hrd-Drv (only one that has firewire input) to my MAC-MINI. APPLE STORE REP says it will pick up BOTH hard dirves (through a "daisy-chain" -like cycle) and that their icons will just pop-up on my mac-mini. So, it's all hooked up and then I clicked over to the mac-mini and there's NOTHING. Both hard-drive icons are no where to be found! There still ONLY found on my PC, of course. Once a again, I was told that my mac-mini would pick-up or access both hard drives from my PC by JUST using a firewire cable! I've done that and I'm having no such luck. Is there a way to do this? Please Help...thanks!

Can you re-state exactly what drives are connected to which computers, and how?
An external hard drive plugged into a PC (or, indeed, even another Mac) on your network will not automatically "show up" on your Mac mini, no matter whether it's USB, Firewire or what. The only way you can even connect to it from the Mini would be to share it out from the PC as an SMB/CIFS (Windows file sharing) share across the network.
Matt

How to send files back to TC from external hard drive quickly?

Hi,
I have just archived 500gb of my TC to external hard drive which was directly connected to TC. I have replaced failing hard drive in TC on 2GB (£50) and reformated gain. Now is ready to be used. Then I wanted to put archive files back onto TC from that external hard drive which is directly connected to TC. The problem is that when I was archiving it files where send directly from TC to external hard drive and it took approximately 5 hours to do it. Now to reverse all that taking about 5 days because for some stupid reason hard drive is sending all that files through my desktop and back to TC again.
Is there any faster way to do it?

A: you DONT modify your TM backup, youd just add files into the same HD, however thats no good because........
Youre trying to create a nasty choke point for data failure by putting time machine AND your files on ONE DRIVE,
very bad idea, hard drives are cheap as dirt, buy another, 2 MINIMUM external redundant backups of your vital data, period.
also, cloud isnt a place for data archives, and not safe, not secure.
The Tragedy that will be, the tragedy that never should be
Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

Itunes will not find my external hard drive and music on it

I have downloaded itunes onto new laptop that has windows vista all the music is stored on an external hard drive. When i plug in the hard drive it no longer finds automatically the music file and runs it as it did on my old pc with windows xp. I have changed the location to find the music in itunes but no luck. If i go into my computer and look at the external hard drive and click on any song it then opens itunes and plays it! Help please

When you say "when i double click on my itunes files it just opens up this list of music." it doesn't mean anything to me. You need to explain clearly, remember I only know what you tell me.
I need to understand how you have things set up and if you had you iTunes library database on the external drive or the c: drive. That is the iTunes folder containing iTunes library.itl.
What do you see when you open iTunes on the new PC, are your music files there. If not, every time you play a track it gets added to itUnes so you should at least have some files in your library.
What problem are you trying to solve? Is just getting the tracks into your iTunes library, or are you also concerned about ratings, count and playlists from the old PC. If so do you still have access to the old PC?

Importing from external hard drive to iphoto 08 error message

Help im very new to mac. I have iphoto 08 i transfered photos from an external hard drive to iphoto. When I open the photos I transfered I get the following error message..the volume for "cimg0000.jpg" cannot be found insert the disk or connect to the server volume and try again. When I close out of that I get a ! mark on the screen...Like I said Im very new to mac and have absolutely no clue what Im doing any help would be greatly appreciated. M

Search Amazon - Davie Pogue I believe has released the missing manual for Leopard - it is a good general reference Liz Castro did a great book on iPhoto 05 but has not done one for '08 as of now
The iPhoto Help section is very helpful
Reading this forum will teach you a lot about iPhoto
If you have not taken the iPhoto tutorials yet you should - http://www.apple.com/support/iphoto/
Make mistakes and fix them - that's the way I do it
LN

10.2.2 (12) not playing from external hard drive

Since updating iTunes on my Mini 10.6.7 I am having a hard time playing any type of file from iTunes. I have my iTunes library stored on an external hard drive and it has been working fine for the past year. Since this latest update to iTunes, when I click on a song, video, podcast, etc. I getting the spinning beach ball of death and if I open the "force quit" menu iTunes shows "application not responding".
I also have a Verizon iPhone that I sync via iTunes. I don't know if that is having any adverse affect or not.
Is anyone else having this problem? Any suggstions?
Thanks,
Jerry

have you already tried repairing permissions using disk utility ?

When importing from external hard drive, creating double songs

I just used the add to library to add lot of songs from an external hard drive. They were in various formats. I-tunes created copies of many of them. This hard drive had 80g worth of music, it would take me forever to go through i-tunes and delete the duplicates.
Why did it do this only to some and how do I correct the problem?

No I tried both neither seems to be working on my system. I used Duplin version 2.5 because 2.6 requires Leopard and I am running tiger.
this is a mess, and I haven't done anything but import the files, I don't want to start setting up play list until I can figure out one of two things.
Why it did it in the first place, I could delete everything and reimport.
Or how to clean it up with doing it one track at a time.
Thanks

Icannot get my pcs to see the external hard drive when I attatch it to the usb port of the airport extreme. They do recognize a thumb drive but will not see the external hard drive. What do I need to do. The ext hard drive is a "MY PASSPORT" with no pw

I need assistance getting my windows computers to see my external harddrive attached to the airport extreme. It is a my passport. The disk shows on the airport utilitiy but neither of my pcs can see it. If i connect a simple thumb dirve they see it just fine.
What do i need to do to get this to work. There is no password on the external hard drive at the moment. I tried removing it to see if that would work.

There are a number of posts related to access issues between Windows Vista / 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
To change the LAN Manager authentication level:
From the Windows Vista / 7 desktop, click Start
Search for: security
Click 'Local Security Policy'
Goto Local Policies > Security Options
Under Policy, double-click 'Network security: LAN Manager authentication level'
Change level to: Send LM & NTLM responses
Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
De-select 'Require 128-bit encryption'
Click OK
To disable Windows Search:
Start > Control Panel > Programs > Programs & Features
On the right-hand side, click "Turn Windows features on/off"
Scroll down, and de-select "Windows Search".
Press OK, close all windows and restart.
A third "solution," that has worked for me, is verify that both the AirPort base station and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name. From the AirPort Utility, you would enter this value on the Disks > File Sharing tab. On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

MOV. files will not import from external hard drive to iMac.

Similar Messages

Maybe you are looking for