MOV format greyed out?

Hey. I have a school project Im working on, and I have a few MOV files i want to import to iMovie '09. The problem is, only several of them will actually import, and I have close to 100. Most are greyed out, and only three or four will actually import. Any suggestions?

IMovie will only import clips with codecs that it can edit. It is important to realize that MOV is a container, not a codec. It is possible to have clips within an MOV container that iMovie cannot edit.
Also, iMovie will not import files with closed captioning tracks, tween tracks, chapter tracks, and the like. If your MOV file contains one of these, it will not import.
In order to give you specific advice, pick one of the files that will not import, and open it using QuickTIme Player. Then click WINDOW/INSPECTOR on the top bar (or click Command-I). This should open the QuickTime Inspector. Then tell is what you see there, especially the dimensions and everything next to the word FORMAT:.

Similar Messages

  • How do I import an existing finalised imovie into a new project either in part or full. The movie I want to import is filed under "movies" but greyed out when I go through the procedure in imovie 11

    How do I import an existing finalised movie clip into  a new developing project ? I go through the imovie 11 procedure for importing and the list of clips (finalised and un-finalised) appears, but always "greyed out" which makes it impossible to create anything. I have tried placing it on the desk top and dragging but this doesn't work either.

    AppleMan  Thanks very much for the information, however I could't make it work. I followed your instructions to the letter, in fact I tried every which-way. I created a dedicated file into which I copied and pasted the project from "package contents"  but it was still greyed out when I went to retrieve it. I also found that the file size was reduced to only a few Kb.  Any further step-by-step instructions would be appreciated as I am obviously doing something wrong.  Babowa  It appears that in imovie everything has to be "finalised" before it can be used or shared elsewhere in the same way as a disk has to be to be played elsewhere. Funnily enough an MOV file I converted to Mp4 was not greyed out and I was able to import it.... an exercise I am not keen on because of resolution loss during conversion

  • Bought movies are greyed out

    I have bought various movies and TV shows via my Apple TV. They automatically sync back to iTunes but are greyed out so I cannot view then or transfer them onto my phone. Any help would be appreciated as I am new to the Apple TV.

    Have they actually synced back?
    I wonder if they might be still transferring and hence not available.
    Can you Show the greyed out movie in a Finder window by right clicking on it?
    Do you have another iTunes on another computer you could copy the file too and try it there?
    You might also want to try deauthorising and reauthorising iTunes to see if that helps (turn AppleTV off while you do this in case it decides to wipe synced stuff).

  • Can't edit movie artwork (greyed out on Get Info tabs)

    All I need to know is how to be able to add artwork to my movies that are being read form an external hard drive. When I press CMD+I for the get info window the option to even select the Artwork tab is greyed out and unavailabe. How do I get it to add artwork that I have found online?
    I did not have this problem when itunes was reading the movies from my actual mac computer it only started when I made itunes read the movies from my external drive. I can still edit the artwork for the ones that are not on my external drive yet and are only on my actual mac computer. Why is this happeneing?

    When you add a movie to iTunes you have to make sure it makes a copy of the file in the iTunes Media folder.  Otherwise, you can't edit any of the information on the movie or video.
    In iTunes 12, go to Edit-->Preferences
    In Preferences, go to Advanced and make sure the "Copy files to iTunes Media folder when adding to library".
    Unfortunately, you will now have to re-import the movie files into iTunes using "Add File To Library..." Once imported, the movie will sometimes appear under "Home Movies" instead of "Movies" but if you right click on the movie file it will list a menu item called "Get Info" where you can change the "Options" to "Movie". You should also be able to click the "Add Artwork" button. 
    Hope that helps.

  • Movie clips greyed out.

    I updated to 2011 and firstly could not see video clips in iPhoto. Downloaded 'Perrin' and i can now view them okay in iPhoto and in Quicktime. However, when i look in iMovie and try to import from iPhoto i am unable to import as many are greyed out.
    Any help appreciated

    Perian might make files viewable in player but it doesn't make them a format that's editable. Use MPEG Streamclip to convert to a editing format.

  • Winrip mp3 recording format greyed out

    I have the Neo 875P Fis2R board.  When I installed winrip 2.1 that was included in the MSI Superpack software, I found that mp3 was greyed out.  I cannot select recording to MP3.  
    Any help here would be appreciated.

    As a rule I don't usually use any of the software that is bundled with MSI hardware...it's a crapshoot at best most of the time...if you need something that will rip cd's then a third party freeware is probly your best bet...you can always rip to wma format which is smaller and just as good, just get the powertoy package from MS's site...a lot of players are supporting it these days...
    Bonz

  • I am trying to move my iphoto and itunes to an external hard drive to free up space on my macbook...i have followed the steps to the change itunes media folder location (chosen external hard drive) but my new folder is greyed out so cant continue ?help?

    I need to free up space on my macbook pro as hard drive is full!! So with 20 000 photos/video clips and itunes I would like to move this to a external hard drive!
    I have followed steps on apple support but when i get to the Change itunes media folder location and chosen external hard drive it will not let me access the new folder option ?? help?

    errrrrrrm!
    Yes external drive shows up in finder on desk top and can change to in the media folder location thing!
    My external hard drive is a WD Elements. I have no idea about permissions to the external? Do i Have to format external hard drive to a mac?
    I am trying to follow the steps on the apple support page to transfer files (consolidate library etc) just cant get further down steps as the new folder option is greyed out!
    Thanks for you help

  • Why movies greyed out?

    As I try to import movie media. it is all greyed out, and I cannot select it for import.  The movies were taken on a Sony camcorder using mini cassettes (don't know specs of the camcorder) and transferred to a DVD by a commercial videographer/photo shop.  The file formats are of three kinds (1. VTS_01_. VOB;    2. VTS_01_IFO;  and   3. VTS_01_BUP).  I found out that VOB is Imovie, IFO is itunes and BUP is something called Unix Executable File.  Copies of the files are listed below.
    I am using a MacBook Pro, Late '08;  OS X (ver 10.8.1, Mountain Lion);  and 25 Gb of space on the hard drive.
    So my questions are 1.  Why is my media greyed out, and 2.  How can I import it?
    Thanks for any help.
    VIDEO_TS.BUP
    VIDEO_TS.IFO
    VIDEO_TS.VOB
    VTS_01_0.BUP
    VTS_01_0.IFO
    VTS_01_1.VOB
    VTS_01_2.VOB
    VTS_01_3.VOB
    VTS_01_4.VOB

    Thank you again.  I used both of the programs suggested.  The VOB files were transported in what appears to be high resolution.  The Quick Time app from apple started the process and MPEG Streamclip finished the job.  The only 'problem', was the water marks left by MPETG Streamclip.  I had to buy the product for about $40.  That amount in addition to the $21 for the Quicktime program cost over $60..an expensive fix, but a fix never-the-less.  Thanks.

  • When I try to import mov files into iMovie'08 (7.1.4) the files are greyed out. Any suggestions?

    When I try to import mov files into iMovie '08 (7.1.4) the files are greyed out. Any suggestions?

    Hi Appleman - thanks for your guidance.
    OK RealTime Inspector: Dimensions of my clips - as I don't know which bit this is I will list everything under Inspector, including Format:
    00117
    00117
    33.30
    Format:MPEG-4 Video, 1280 x 720 millions
    AAC, 2channels, 44100Hz
    FPS29.97
    Data Size2.57GB
    Data Rate 10.20 Mbits/s
    Current size 1280 x 720 pixels (Actual)
    And re the types of tracks you mention that iMovie '08 can't import, I don't much about film clips so haven't yet made sense of this, tho I do see that the clips are organised into chapters, so presumably this is 'chapter tracks'?
    Thanks - I'll await your further instructions :-)

  • How do i synch my pdf/books to my library. I was able to synch my ipod touch purchases by transferring them but can't figure out how to do my pdfs. Also why is my ipod picture greyed out-the one that lets my move the icons around.

    How do i synch my pdf/books to my Itunes  library. I was able to synch my ipod touch app purchases by transferring them but can't figure out how to do my pdfs. Also why is my ipod picture greyed out-the one that lets my move the icons around.
    I am afraid if i don't get the pdfs into my book library, i will lose them when i update to IOS 5-is that true?

    thank you-i have to check into the authorization and the account-i gave my husband my old ipod when i updated last year so both at one time have been on this computer but as it stands, it only comes up with my device when i plug into Itunes.
    i don't think i have any restrictions for installing apps although my normal way of doing it is to download from the ipod touch. i did find that all i had to do was right click on my device name and got the message to transfer my apps and then they showed up in my library. Also when i clicked the synch checkbox i was able to view the ipod touch picture without it being greyed out. after all that i was able toupdate to IOS 5 successfully except my videos and podcast, and pdfs  did not come over. This confuses me since i had dragged them over to my library to make sure that i had everything in my library and on my device. Not a big problem, since i just dragged them in itunes from my library to my device but sometimes i wonder if i understand the big picture:)

  • Can't move emails from one account to another, some accts greyed out.

    I am using the iphone 4s and ios 6    I have two gmail accounts and one outlook exchange accout through work.  I used to be able to move messages from 1st gmail to the second or even to the outlook exchange acct just fine.  Now depending on which acct I am starting in, some of the other accts are greyed out and I can't click on them.   What has happened and how can I fix this?  I think this may have been in another thread but I didn't see anything specific or any fixes.
    Thank You

    I have similar problem here which problem began this morning. When attempting to move an image file to a folder (something I've done a kazillion times) an error message pops up:
    The item "*.jpeg" could not be moved because "Raw Images" cannot be modified.
    No amount of changing file permissions makes any difference. Redoing the image with PhotoShop doesn't help. Tried to move an image file I created years ago and get same message. Also changed permissions on destination folder - no effect.
    I can however move the same recalcitrant file to a backup HD or a memory stick without problem. Can also move same file into iPhoto with no problem.
    Ran Applejack utility - no difference.
    Is this a virus or Trojan Horse of some kind??? Any help would be appreciated.
    Thanks

  • After 10.9.4 Update: Mail Messages Grey Out Upon Deleting-Don't Move to Trash?

    Hello,
    After 10.9.4 Update/MacBook Pro with Retina display: Mail Messages Grey Out Upon Deleting-Don't Move to Trash? I believe I must join those who are having trouble with mail after this latest update. Deleted messages just turn a light grey in the message panel and don't move to trash until after I quit and restart mail. I have also experienced the screen "Freezing" ... no spinning beach ball, just the pointer frozen. This has happened only when I use mail and requires a "hard" re-start to correct.  Is this a "feature" of the update, or is it a problem? Thanks!

    Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Back up all data.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
    sudo find ~ $TMPDIR.. -exec chflags nouchg,nouappnd,noschg,nosappnd {} + -exec chown $UID {} + -exec chmod +rw {} + -exec chmod -N {} + -type d -exec chmod +x {} + 2>&-
    This time you'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button
    Select
               ▹ Restart
    from the menu bar.
    Quit Mail and empty the Trash. If you still can't, log out or restart the computer.

  • The movement type 261 is greyed out in MIGO

    HI Experts,
    We have a scenario where we want to use the copy of movement type 261 to post goods issue against a process order. In MIGO even if I change it in the initial screen and execute, system takes only 261. System is not allowing to change it in the tab "Where". The field for mvt type in this tab is greyed out.
    But we have created a movement type to post the goods receipt which is copy of 101. This is working fine. System takes this movement type when we enter it in the initial screen and copies to the tab where.
    How to solve this issue?
    Request your expert advice.
    Regards
    Prathib

    Hi Ajit,
    Thanks for the reply. Here the issue is we wanted to use the customized movement type only for a particular type of order. For all the other order we should use 261 only.
    I dont think this can be done through standard SAP. Is there any user exit or BADI for the same?
    Please let me know.
    Thanks & Regards
    Prathib

  • Moving iPhoto to external drive; have formatted external disk to Mac OS Extended (Journaled), moved the iPhoto library to external drive; when trying to change the library, the iPhoto file on new external is greyed out   can't be selected.What went wrong?

    Must have done something wrong..
    1.  formatted external disk to Mac OS Extended (Journaled) - required a partition, but that went fine.  Entire new external disk was included in the partition formatted to Mac OS Extneded (journaled).
    2.  moved iPhoto library to new external disk
    3.  Holding Option key down, opened iPhoto
    4.  Choose library feature appeared, however when new library function option appeared and "choose library" selected, the iPhoto folder appearing in the new external drive was greyed out and not able to be selected.  Therefore the default library remains the original iphoto library on the Mac. 
    I've moved the original iphoto library to the trash and then tried to start iPhoto.  A message comes up that the iPhoto is in the trash and needs to be pulled out before iPhoto can start (clearly the new iphoto library on the external drive is not being seen.
    Can anyone suggest where I went awry?  Thanks!

    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
    (On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
    (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
    Then try select it again.

  • ITunes 11 - Get Info greyed out for movies on external drive

    With iTunes 10, my itunes movies and TV shows grew to about 1.2TB of data, and I shifted them to an external drive.
    I was able to edit the information via 'get info' until upgrading to iTunes 11.
    Now all the information, bar the 'five stars' field are greyed out. If I shift a particular movie back to the internal drive, I can edit (genre, for example). Shift away again, get info greys out.
    Any advice? It feels like iTunes thinks it has the wrong permissions.

    When you add a movie to iTunes you have to make sure it makes a copy of the file in the iTunes Media folder.  Otherwise, you can't edit any of the information on the movie or video.
    In iTunes 12, go to Edit-->Preferences
    In Preferences, go to Advanced and make sure the "Copy files to iTunes Media folder when adding to library".
    Unfortunately, you will now have to re-import the movie files into iTunes using "Add File To Library..." Once imported, the movie will sometimes appear under "Home Movies" instead of "Movies" but if you right click on the movie file it will list a menu item called "Get Info" where you can change the "Options" to "Movie". 
    Hope that helps.

Maybe you are looking for

  • Changes  are not reflecting in the table control in 2nd time

    Hi,     In BSP Portal Asset management page, General,cost center, allocations ..etc tabs are there.and i have maintain button also in this page After filling all these things, when i  click the maintain button , the mandatory fields [General,costcent

  • Help Needed in AD Connection form Java Code

    Hi, I want to connect to AD target form my java program. We are doing this as we don't want to use the OOTB Connectors. How can any one connect to AD target from Java program? After connecting, How to Create a User in AD? Is there any API? Which one?

  • Linksys Router not loading some pages

    I was using the internet on my new IMAC and it was running great. Very fast. I have now added Vonage to the mix and installed a Linksys BEFSX41 router to the fold and have my mac connecting using DHCP and the router logs into my server using PPPoE. P

  • Bitmap Fill is not working as thought

    I am working on a simple target game. I have a class created that inherits from Sprite called TargetSprite. TargetSprite creates a resize matrix, sets beginBitmapFill, sets the line type, then draws a circle, then ends the fill. The problem is that i

  • How to achieve Incremental deployment of Code Files to different environments of windows azure using TFS and Visual Studio ?

    Hi We are new to Windows azure and are developing a web application. In the beginning of the project , we have deployed complete code using Sitefinity Thunder to different environments which actually publish complete code. But now as we are in the mi