.mov-mpg format questions

**New FCP editor**. I created a movie and the client needs it submitted in a .mpg, .mov or .vmv format. The file is 10 minutes long and the final piece will be posted on a web site. The size needs to have a resolution of 720x480 or larger. I sent it to compressor, used DVD:best quality 90 min and adjusted the average bit rate to 9.0. It gave me a MPEG-2 file. It that the same as .mpg? Am I better off using Quicktime 7/H.264 800bps streaming setting. The encoder show a width and height as 428x240 so is that below the required specs.
Thank you in advance for responding.

David S. wrote:
Duplicating it doesn't permit you to change the pixel size at all.
It won't go beyond 320x240.
Ah, I see that now, thanks, David, my mistake.
Turns out that we use Cleaner for full frame MEPG1 output. For unknown reasons, Autodesk Cleaner has no such restrictions on MPEG1. I can set the output dimensions to anything.
bogiesan

Similar Messages

  • I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?

    I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?

    garysm99 wrote:
    Not familiar with structure view. How do I go there?
    click in IDVD on this button

  • Converting *.mov and *.mpg formats to import in iMovie 08

    I am not able to import .mov files created in iPhoto and *.mpg format. Can someone please tell me how to convert it to an importable format.

    If you want to edit these clips, your best bet is to download MPEG Streamclip (free) and the Apple Quicktime MPEG2 Playback Component ($20). Open MPEG Streamclip and drag the .mpg files to the big open pane in MPEG Streamclip. Now you can export the clip into a format that can be edited by iMovie for editing. For example, convert to AIC (Apple Intermediate Codec) in the same dimensions as the original.
    If you want to go straight to DVD, you need a DVD authoring tool like Toast 10 (iDVD will not accept MPEG as a source). With Toast 10, you can open a DVD project and drag the .mpg file into it directly.
    You still might need MPEG Streamclip if the .mpg file is too long to fit on a DVD, in which case you would use MPEG Streamclip to divide the .mpg file into two parts.

  • I'm using ezcap.tv 116 ezgamer capture card to record my PS3, this is on a windows laptop, Im then moving the recorded videos in mpg format over to my MacBook Pro to use IMovie to edit them to upload to youtube but it won't let me import them.

    I'm using ezcap.tv 116 ezgamer capture card to record my PS3, this is on a windows laptop, Im then moving the recorded videos in mpg format over to my MacBook Pro to use IMovie to edit them so i can upload them to youtube but it won't let me import them, even after changeing them to MP4 format, it just comes up with the message: "No Importable Files None of the selected files or folders can be imported. Change the selection and try again."
    Ive even tried opening in itunes and copying from thier but they wont open in Itunes, no message or anything they simple just dont open. its strange because it does open in quicktime player.
    please if anyone has any ideas that can help me please let me know XD thanks.

    First problem: You're fine. The hotter it gets, the more the fans spin up. The computer is designed so that at max load, at max fan speed, it won't overheat (unless it's obstructed by something, e.g. sitting on your bed swallowed by a comforter). It's not the best thing to keep it that toasty for days at a time, but a couple hours at a time shouldn't be a problem.
    Second problem: If something in the trash won't delete, just use Secure Empty Trash and it should be fine. Since .torrent files are quite small, it should only take a couple seconds.

  • How do you export a working closed caption for Premiere Pro CC 2014 in .mpg format?

    We do weekly 1/2 hour programs that require closed captioning for air. I need to know how to export a self contained .mpg format without using MacCaption. If not possible, is there another, less expensive, 3rd party program that I can use? Or better yet, is Adobe going to create one for us?

    Look for the wrench icon in the monitors, above the playback area, to the right. Tooltip for it is "Settings..." -- the menu item is in the flag menu there: Closed Captioning Display...

  • Landscape formatting question

    Can anyone help me with a formatting question? I have a number of PDFs that are landscape format. Every time I open them they default to portrait, even when I change orientation in page set-up and re-save...

    You are only changing the view, not the pdf. Use the Rotate command in the Document menu, not the view menu.

  • Locale Formatting question

    Locale Formatting question
    In the preceding code the number 50 represent currency.
    The output of NumberFormat is 50 with the local symbol
    The output of DecimalFormat is 50.00 without the local symbol
    The question is how to show 50.00 with the local symbol ???
    import java.text.*;
    import java.math.BigDecimal;
    public class LocalFormating {
    public static void main(String[] args) {
    NumberFormat nf = NumberFormat.getCurrencyInstance();
    DecimalFormat decfs = new DecimalFormat("#,##0.00");
    BigDecimal anumb = new BigDecimal(50);
    String temp = nf.format(anumb);
    System.out.println("local anumb = " +temp);
    String temp2 = decfs.format(anumb);
    System.out.println("Decimal format anumb = " +temp2);

    Locale Formatting question
    In the preceding code the number 50 represent currency.
    The output of NumberFormat is 50 with the local symbol
    The output of DecimalFormat is 50.00 without the local symbol
    The question is how to show 50.00 with the local symbol ???
    import java.text.*;
    import java.math.BigDecimal;
    public class LocalFormating {
    public static void main(String[] args) {
    NumberFormat nf = NumberFormat.getCurrencyInstance();
    DecimalFormat decfs = new DecimalFormat("#,##0.00");
    BigDecimal anumb = new BigDecimal(50);
    String temp = nf.format(anumb);
    System.out.println("local anumb = " +temp);
    String temp2 = decfs.format(anumb);
    System.out.println("Decimal format anumb = " +temp2);

  • What movie file formats can be imported into iMovie?

    Can you directly import .avi, mpeg or .mov files? What about a Quicktime movie file? Just trying to figure out which file format iMovie will accept. I have a movie that was edited on Adobe Premiere and want to make sure I export the movie in the correct format.
    Thanks.

    read Jon's reply in this thread ..
    https://discussions.apple.com/thread/1891778?start=0&tstart=0
    keep in mind: avi nor mov are 'formats', just media wrappers = box of chocolate, you'lll never know ...
    stay within normal video standards, such as 1080i or 720p, 25/29.97fps ... mov encoded with h264 should be fine.
    and avoid fancy stuff such as surround, Dolby 5.1., 3D ........

  • I have 3 DVDs with videos recorded in mpg format. My Mac will not play them and says I may need to download software. Does anyone know what to do to play the DVDs.

    I have 3 DVDs with videos recorded in mpg  format. My Mac says it cannot play them and I may need to download additional software. Does anyone have any suggestions on what to download or do to play them?
    naomifromnewyork

    VideoLAN - Official download of VLC media player for Mac OS X

  • Cascading lookup format questions

    Hi everyone,
       I have a couple of questions regarding formatting the cascading look up fields.  I have a list that filters classes and mnemonics by educator which works fine however on the entry form, when the "Educators" drop down menu is changed,
    a secondary description box appears. The question is, how do I get rid of that secondary description box?
    The second formatting question is that when I have filled out the form, on the edit entry form, there is a hyperlink to the list that the cascading lookup is using as a reference. How do I get rid of that link? See image 002 below

    It's not easy to understand the question, please attach the image here.
    if you mean to achieve a cascade lookup in SharePoint new/edit form, after selecting one column, the cascaded column below will show with filtered value, otherwise, the column is hidden, you may consider to use JavaScript/JQuery to show/hide the second column,
    following is an article about how to use cascaded lookup in SharePoint:
    http://www.sharepointboris.net/js/spcd/
    Qiao Wei <br/> My blog:http://blog.goobol.com

  • HT3775 how to play a video MPG format on a mac

    how to play a video MPG format on a mac

    Try VLC media player it seems to play almost any codec.
    https://www.macupdate.com/app/mac/5758/vlc-media-player

  • Convert or Play ENTIRE MPEG-1 movie (.mpg) on Quicktime

    I have an mpeg-1 movie (.mpg)117mb. I tried to watch it on QT and it only plays about 1 minute of a 10 minute movie. When using a windows media player, the whole thing plays. I tried converting with streamclip AND Tubetv but only the first minute converts.
    Any help will be GREATLY appreciated.
    skip

    If this is the case AND I have to manually set it to fix time code breaks, how do I do it manually?
    "Command-F" or use the "Fix Timecode Breaks..." Edit menu option.

  • Nikon D5200 264 Codec in MOV file format

    I have upgraded to the Nikon D5200. This camera is brand new but I am unable to view the videos in premiere. Only the audio shows up.The videos are saved in MOV file format. After updating the Quicktime on my computer I can see the videos but they are very choppy and pixelated. Once I put them into a premiere project, they have to immediately be rendered. Am I missing something here?
    I was using a Sony NEX 5R and never had this problem. Please help me figure out the best way to fix this problem as I can not do any video editing under these circumstances. Thanks for your help.

    jbstrong
    Lots more information is needed for us to help you as John T. Smith has said.
    1. What version of Premiere Elements are you using and on what computer operating system is it running?
    2. From what I have read of your camera, you are shooting AVCHD, if you say .mov, the with a .mov file extension. I believe the audio is Linear PCM Stereo. But, what is your camera setting? I see several choices
    1920 x 1080 @ 29.97 interlaced frames per second (aka 60i)
    1920 x 1080 @ 29.97 progressive frames per second
    1280 x 720 @ 50 or 60 progressive frames per second
    and even
    640 x 424 @ 30 or 25 progressive frames per second.
    Which one?
    3. What are you or the project setting as the project preset based on the properties of your source media.
    4. Besides now having the latest version of QuickTime installed on your computer, are you running Premiere Elements as Run As Administrator or from a User Account with Administrative Privileges?
    5. If you do not have the correct project preset, that would be the top choice for the colored line over that Timeline content and the need for rendering of that Timeline to get the best possible preview in the Edit Mode monitor. The latter occurs when you did not set it correctly or the program had problems putting the video properties into one of its categories. Then you set the project preset yourself manually before you import the source media. Once we have more details from you, we can help you select the correct project preset and sort through other possible factors contributing to your issues.
    The answers are in the details.
    We look forward to your follow up.
    Thanks.
    ATR

  • How to import videos MOV.MOD format to iMovie?

    how to import videos MOV.MOD format to iMovie?

    you haven't told us (yet).
    but you'll find an 'Import from camera' button in your old version too..

  • How can I move paragraph formats from one document to a new one?

    How can I move paragraph formats from one document to a new one?

    > How can I move paragraph formats from one document to a new one?
    Have both open.
    File > Import > Formats
    Import from Document: [ nameofsource.fm ]
    [ Deselect All ]
    [*] Paragraph Formats
    [ Import ]
    Now, do the existing paras in the importing document have exactly the same names?

Maybe you are looking for