Mov not running on PC

I exported a file from iMovie 4 in mov format in the FullDv or Final DV i dont remember. the last quality setting that is given and burnt it on a cd. now when i try to play it on my PC it shows "Error -2048: the file is not a movie file". I have quick time 7.0.4 bundled with itunes.
please help

Welcome to discussions Sateendra!
Personally I would have prefered to save as MPEG-4, to view on a PC-but I don't think that counts.When you look at the file in your PC does it look like a QT movie or it looks as a .DAT file? In case it doesn't have an extension, make a copy of it at your desktop and add the extension .mov manually.Otherwise, you can always try with the Get Info pane make it a QT movie directly from your Mac prior to exporting.
P.S. : I'd like to help further, but I'm now on iMovie6 and don't remember settings...

Similar Messages

Mkv format MOVIES not running on belle fp1

Hi frndz,
It is so irritating that I cannot play any mkv format movies on my nokia 603.
It is a totally time consuming process of converting the movies into supportable format.so ,NOKIA please provide us any MKV MOVIE PLAYER like that of andriod to resolve this issue.

Nokia Belle FP1 supports MKV playback. MKV however is not a video encoding but a container for a combination of audio and video files, usually MPG-4 video and AAC for audio.
That said a MKV container you use on your PC or Mac may not play on your 603 because the encoding is too high. For use on the 603 it would be advisable to use an encoding using the main or baseline profile with a level of upto 3.1
You will find several tools online which will allow you to transcode your video files to an encoding which the 603 will be able to play.
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Movies disappearing from AppleTV when iTunes not running

I have synced my iTunes content to my AppleTV several times and have found that I continue to experience jerky playback of movies (AppleTV will pause to buffer data) and that the movies totally disappear from my AppleTV menu when I shut down iTunes. I believe that the movies files have been copied to AppleTV (ie I am not streaming the files). When I restart iTunes, it appears to need to re-sync only the movies with my AppleTV (music, Podcasts, and photos remain available on AppleTV while iTunes is not running). Please advise 1. why the poor flow when movie is playing on AppleTV and 2. why does it seem to need to keep re-syncing movies to the AppleTV?

Hi Drew-Bob,
iTunes should not have to re-sync your purchased movies if they transferred over correctly,
You might want to try restarting the Apple TV, or restoring it. Information on how to perform this is in knowledge base article 305190 (http://docs.info.apple.com/article.html?artnum=305190).
Cheers,
John

Email Movement When Thunderbird not Running

I am trying to use Thunderbird to move emails between two accounts (a gmail and a .edu). I have hosted both the accounts in the Thunderbird "client" and the emails of both are loaded when I open Thunderbird and login to the accounts. Thunderbird is able to copy emails from one of my email accounts and create the emails in another, which is my goal. I can then see the emails from the .edu in the gmail inbox since they have been copied. However, when Thunderbird is not running or the computer on which I have it installed is logged off/shut down, the emails stop being copied to the other email account. How can I make it so that Thunderbird will always process my rule of copying emails from the .edu to the gmail even when it is not open on any computer? Is this possible?

Figured out the best workaround. My main issue was that on my mobile device, the default mail client wasn't able to load the .edu email without forcing me to create a password for my phone lock screen. Didn't want to do that, so this meant that I could view ''Gmail only'' on my phone in the Email app. There was no way to view both inboxes as combined at once, so I wanted to find a way to get my .edu emails into Gmail continuously. I switched to the Gmail App and found that I could import the .edu account via IMAP to the app (which is more like a client than webmail) and still have the Gmail account (even though they still remain separate, you can view a combined inbox). '''I don't get why IMAP importing is enabled on the GMail app, but not the desktop webmail. And why there is no way to create filters in the GMail App like there is on both the Gmail Desktop version and Thunderbird.'''
Anyway, the world is pleading for developers to release an Android app that allows movement of emails between accounts, as none currently exist. If anyone knows of desktop webmails like Gmail that allow IMAP import, I'd like to know those also! NOTE: my .edu email had POP disabled completely.
So bottom line for all you people like me with this problem. ''Seems like the best solution currently is to use a '''client''' or '''Webmail with IMAP import''' (which I don't know any) on your desktop, and use any of the good clients for your mobile device (K-9, TypeMail, Gmail App, etc) to view all your email accounts in 1 place on both phone and PC...''
And keep dreaming of the day there's an android app that allows moving emails between accounts (already available on iOS).
Hope this helps!

SAPOSCOL not running in MS Cluster

Hi, gurus:
We have a problem with SAPOSCOL in a SAP ECC 6.0 system (SAP ECC 6.0 + NetWeaver 7.00 + Oracle 10.2 + Windows Server 2003 R2 Enterprise x64 Edition) running over a MS cluster:
Transactions OS06/ST06 shows no data, and they show an info message wich states: SAPOSCOL not running ? (shared memory not available ). When we checked this issue, we noticed that, in fact, there is no sapcoscol.exe task running in any node.
But when we try to start the service (both using microsoft services console and cmd commands) although we can see the process running in the node which owns all the resources, SAP seems not notice that. The information system shows in ST06>Operating System Collector>Status is the following:
iinterval             0             sec.
Collector Version:
Date/time             05.09.2008 16:55:01
Start of Collector
Status report
Collector Versions
running                                   COLL 20.95     700     - 20.64     NT 07/10/17
dialog                                   COLL 20.95     700     - 20.65     NT 08/02/06
Shared Memory                              attached
Number of records                         575
Active Flag                              active     (01)
Operating System                         Windows NT     5.2.3790 SP     2 BL-SAP2 4x AMD64 Level 1
Collector PID                              0 (00000000)
Collector                                   not running (process ID not found).
Start time coll.                              Thu Jan 01     01:00:00 1970
Current     Time                              Fri Sep 05     16:55:01 2008
Last write access                         Mon Sep 01     11:28:23 2008
Last Read Access                         Fri Sep 05     15:54:00 2008
Collection Interval                         10     sec     (next delay).
Collection Interval                         10     sec     (last ).
Status                                   read
Collect     Details                         required
Refresh                                   required
Header Extention Structure
Number of x-header          Records          1
Number of Communication     Records          60
Number of free Com.          Records          60
Resulting offset to     1.data rec.               61
Trace level                                   3
Collector in IDLE -     mode ?               NO
become idle after     300     sec     without     read access.|
Length of     Idle Interval                    60     sec
Length of     norm.Interval                    10     sec
But saposcol.exe is running with a certain PID in the same note than SAP and Oracle under user sapservice<sid>
We have tried to run saposcol in several ways (as, I have noted before: from microsoft service console, from cmd line using "net start saposcol", using the saposcol under C:\WINDOWS\SapCluster and the one under
F:\usr\sap\PRD\sys\exe\run, fom the two nodes, accessing the cluster through several IPs...) and tried the commands saposcol -c and saposcol -k but we cannot get the saposcoll run. Moreover, we haven't found any log information. The only log we (and SAP) could find is the one located in C:\WINDOWS\SapCluster\dev_coll.
This log remain frozen at September 1st:
      SAPOSCOL version COLL 20.95 700 - 20.64 NT 07/10/17, 64 bit, multithreaded, Non-Unicode
      compiled at   Feb 3 2008
      systemid      562 (PC with Windows NT)
      relno         7000
      patch text    COLL 20.95 700 - 20.64 NT 07/10/17
      patchno       146
      intno         20050900
      running on    BL-SAP2 Windows NT 5.2 3790 Service Pack 2 4x AMD64 Level 15 (Mod 65 Step 3)
12:04:16 01.09.2008   LOG: Profile          : no profile used
12:04:16 01.09.2008   LOG: Saposcol Version : [COLL 20.95 700 - 20.64 NT 07/10/17]
12:04:16 01.09.2008   LOG: Working directory : C:\WINDOWS\SAPCLU~1
12:04:16 01.09.2008   LOG: Allocate Counter Buffer [10000 Bytes]
12:04:16 01.09.2008   LOG: Allocate Instance Buffer [10000 Bytes]
12:04:17 01.09.2008   LOG: Shared Memory Size: 71898.
12:04:17 01.09.2008   LOG: Connected to existing shared memory.
12:04:17 01.09.2008   LOG: MaxRecords = 575 <> RecordCnt + Dta_offset = 614 + 61
12:04:22 01.09.2008 WARNING: WaitFree: could not set new shared memory status after 5 sec
12:04:22 01.09.2008 WARNING: Cannot create Shared Memory
Kernel Info:
Kernel release    700
Compilation        NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
Sup.Pkg lvl.       146
ABAP Load       1563
CUA load           30
Mode                opt
Can anyone shed some light on the subject?
Thank you very much and kind regards
Edited by: Jose Enrique Sepulveda on Sep 6, 2008 2:10 AM

Dear bhaskar:
Thanks for your reply. We have considered balancing the system to the other node or reboot the system to free resources, in order to re-create the shared memory, but in the past, the balancing process (move resources from one node to the other) has caused problems. Since this is a critical system, stopping (or balancing) is not an option right now, and updating the kernel requires an ABAP stack reboot plus the kernel change : any changes in system configuration requires a longer approval/planning process than a reboot.
Moreover, the OS collecting system and its display in OS06/ST06 has worked fine until now.
Does anyone knows if a reboot has solved this kind of problem in a similar situation?
Thanks in advance
José Enrique

QMASTER hints 4 usual trouble (QM NOT running/CLUSTEREd nodes/Networks etc

All, I just posted this with some hints & workaround with very common issues people have on this forum and keep asking concerning the use of APPLE QMASTER with FCP, SHAKE, COMPRESSOR and MOTION. I've had many over the last 2 years and see them coming up frequently.
Perhaps these symptoms are fixed in FCS2 at MAY 2007 (now). However if not here's some ROTS that i used for FCP to compressor via QMASTER cluster for example. NO special order but might help someone get around the stuff with QMASTER V2.3, FCP V5.1.4, compressor.app V2.3
I saw the latest QMASTER UI and usage at NAB2007 and it looked a little more solid with some "EASY SETUP" stuff. I hope it has been reworked underneath.. I guess I will know soon if it has.
For most FCP/COMPRESSOR, SHAKE. MOTION and COMPRESSOR:
• provide access from ALL nodes to ALL the source and target objects (files) on their VOLUMES. Simply MOUNT those volumes through the APPLE file system (via NFS) using +k (cmd+k) or finder/go/connect to server. OR using an SSAFS such as XSAN™ where the file systems are all shared over FC not the network. YOu will notice the CPU's going very busy for a small while. THhis is the APPLE FILE SYSTEM task,,, I guess it's doing 'spotlight stuff". This goes away after a few minutes.
• set the COMPRESSOR preferences for "CLUSTER OPTIONS" to "Never copy source to Cluster". This means that all nodes can access your source and target objects (files) over NFS (as above). Failure to to this means LENGTHY times to COPY material back an forth, in some cases undermining the pleasure gained from initially using clustering (reduced job times)
• DONT mix the PHYSICAL or LOGICAL networks in your local cluster. I dont know why but I could never get this to work. Physical mean stick with eother ETHERNET or FIREWIRE or your other (airport etc whic will be generally way to slow and useless), Logical measn leepin all nodes on the SAME subnet. You can do this siply by setting theis up in the system preferences/QMASTER/advanced tab under "Use Network Interfaces". In my currnet QUAd I set this to use BUILT IN ETHERNET1 and in the MPBDC's I set this to their BUILTIN ETHERNET.
• LOGICAL NETWORKS (Subnet): simply HARDCODE an IP address on the ETHERNET (for eample) for your cluster nodes andthe service controller. FOr eample 3.1.1.x .... it will all connect fine.
• Physical Networks: As above (1) DONT MIX firewire (IPoFW) and Ethernet(IPoE). (2) if more than extra service node USE A HUB or SWITCH. I went and bought a 10 port GbE HUB for about $HK400 (€40) and it worked fine. I was NEVER able to get a stable system of QMASTER mixing FW and ETHERNET. (3) fwiw using IP of FW caused me a LOAD of DISK errors and timouts (I/O errors) on thosse DISKs that were FW400 (al gone now) but it showed this was not stable overall
• for the cluster controller node MAKE SURE you set the CLUSTER STORAGE (system preferences/QMASTER/shared cluster storage) for the CLUSTER CONTROLLER NODE IS ON A SHARED volume (See above). This seems essential for SHAKE to work. (if not check the Qmaster errors in the console.app [see below] ). IF you have an SSAFS like XSAN™ then just add this cluster storage on a share file path. NOte that QMASTER does not permit the cluster storage to be on a NETWORK NODE for some reason. So in short just MOUNT the volume where the SHARED CLUSTER file is maintained for the CLUSTER controller.
• FCP - avoid EXPORT to COMPRESSOR from the TIMELINE - it never seems to work properly (see later). Instead EXPORT FROM SEQUENCE in the BROWSER - consistent results
• FCP - "media missing " messages on EXPORT to COMPRESSOR.. seems a defect in FCP 5.1 when you EXPORT using a sequence that is NOT in the "root" or primary trry in the FCP PROJECT BROWSER. Simply if you have browser/bin A contains(Bin B (contains Bin C (contains sequence X))) this will FAIL (wont work) for "EXPORT TO COMPRESSOR" if you use EXPORT to COMPRESSOR in a FCP browser PANE that is separately OPEN. To get around this, simply OPEN/EXPOSE the triangles/trees in the BROWSER PANE for the PROJECT and select the SEQUENCE you want and "EXPORT to COMPRESSOR" from there. This has been documented in a few places in this forum I think.
• FCP -> COMPRESSOR -> .M2V (for DVDSP3): some things here. EXPORTING from an FCP SEQUENCE with CHAPTER MARKERS to an MPEG2 .M2V encoding USING A CLUSTER causes errors in the placement of the chapter makers when it is imported to DVDSP3. In fact CONSISTENTLY, ALL the chapter markers are all PLACED AT THE END of the TRACK in DVD SP# - somewhat useless. This seems to happen ALSO when the source is an FCP reference movie, although inconsistent. A simple work around if you have the machines is TRUN OF SEGMENTING in the COMPRESSOR ENCODER inspector. let each .M2V transcode run on the same service node. FOr the jobs at hand just set up a CLUSTER and controller for each machine and then SELECT the cluster (myclusterA, hisclusterb, herclusterc) for each transcode job.. anyway for me.. the time spent resolving all this I could have TRANSCODED all this on my QUAD and it would all have ben done by sooner! (LOL)
• CONSOLE logs: IF QMASTER fails, I would suggest your fist port of diagnosis should be /Library/Logs/Qmaster in there you will see (on the controller node) compressor.log, jobcontroller.com.apple.qmaster.cluster.admin.log, and lots of others including service controller.com.apple.qmaster.executorX.log (for each cpu/core and node) andd qmasterca.log. All these are worth a look and for me helped me solve 90% of my qmaster errors and failures.
• MOTION 3 - fwiw.. EXPORT USING COMPRESSOR to a CLUSTER seems to fail EVERY TIME.. seems MOTION is writing stuff out to a /var/spool/qmaster
TROUBLESHOOTING QMASTER: IF QMASTER seems buggered up (hosed), then follow these steps PRIOR to restarting you machines.
go read the TROUBLE SHOOTING in the published APPLE docs for COMPRESSOR, SHAKE and "SET UP FOR DISTRIBUTED PROCESSING" and serach these forums CAREFULLY.. the answer is usually there somewhere.
ELSE THEN,, try these steps....
You'll feel that QMASTER is in trouble when you
• see that the QMASTER ICON at the top of the screen says 'NO SERVICES" even though that node is started and
• that the APPLE QMASTER ADMINSTRATOR is VERY SLOW after an 'APPLY" (like minutes with SPINNING BEACHBALL) or it WONT LET YOU DELETE a cluster or you see 'undefined' nodes in your cluster (meaning that one was shut down or had a network failure)..... all this means it's going to get worse and worse. SO DONT submit any more work to QAMSTER... best count you gains and follow this list next.
(a) in COMPRESSOR.app / RESET BACKGROUND PROCESSES (its under the COMPRESSOR name list box) see if things get kick started but you will lose all the work that has been done up to that point for COMPRESSOR.app
b) if no OK, then on EACH node in that cluster, STOP the QMASTER (system preferences/QMASTER/setup [set 0 minutes in the prompt and OK). Then when STOPPED, RESET the shared services my licking OPTION+CLICK on the "START" button to reveal the "RESET SERVICES". Then click "START" on each node to start the services. This has the actin of REMOVING or in the case where the CLUSTER CONTROLLER node is "RESET" f terminating the cluster that's under its control. IF so Simply go to APPLE QMASTER ADMINISTRATOR and REDFINE it. Go restart you cluster.
c) if step (b) is no help, consult the QMASTER logs in /Library/Logs/Qmaster (using the cosole.app) for any FILE MISSING or FILE not found or FILE ERROR . Look carefully for the NODENAME (the machine_name.local) where the error may have occured. Sometimes it's very chatty. Others it is not. ALso look in the BATCH MONITOR OUTPUT for errors messages. Often these are NEVER written (or I cant find them) in the /var/logs... try and resolve any issues you can see (mostly VOLUME or FILE path issues from my experience)
(d) if still no joy then - try removing all the 'dead' cluster files from /var/tmp/qmaster , /var/sppol/qmaster and also the file directory that you specified above for the controller to share the clustering. FOR shake issues, go do the same (note also where the shake shared cluster file path is - it can be also specified in the RENDER FILEOUT nodes prompt).
e) if all this WONT help you, its time to get the BIG hammer out. Simply, STOP all nodes of not stopped. (if status/mode is "STOPPING" then it [QMASTER] is truly buggered). DISMOUNT the network volumes you had mounted. and RESTART ALL YOUR NODES. Tis has the affect of RESTARTING all the QMASTERD tasks. YEs sure you can go in and SUDO restart them but it is dodgy at best because they never seem to terminate cleanly (Kill -9 etc) or FORCE QUIT.... is what one ends up doing and then STILL having to restart.
f) after restart perform steps from (B) again and it will be usually (but not always) right after that
LAstly - here's some posts I have made that may help others for QMASTER 2.3 .. and not for the NEW QMASTER as at MAy 2007...
Topic "qmasterd not running" - how this happened and what we did to fix it. - http://discussions.apple.com/message.jspa?messageID=4168064#4168064
Topic: IP over Firewire AND Ethernet connected cluster? http://discussions.apple.com/message.jspa?messageID=4171772#4171772
LAstly spend some DEDICATED time to using OBJECTIVE keywords to search the FINAL CUT PRO, SHAKE, COMPRESSOR , MOTION and QMASTER forums
hope thats helps.
G5 QUAD 8GB ram w/3.5TB + 2 x 15in MBPCore Mac OS X (10.4.9) FCS1, SHAKE 4.1

Warwick,
Thanks for joining the forum and for doing all this work and posting your results for our benefit.
As FCP2 arrives in our shop, we will try once again to make sense of it and to see if we can boost our efficiencies in rendering big projects and getting Compressor to embrace five or six idle Macs.
Nonetheless, I am still in "Major Disbelief Mode" that Apple has done so little to make this software actually useful.
bogiesan

Movie not loaded on Win 7 - 64bit

Hi all,
this question is in a similar thread as this:
http://forums.adobe.com/message/4184624
However i have been unable to resolve this issue as the previous poster was.
i have completed 3 separate OS installs of windows 7 (2-64bit installs and 1-32bit install). However i have been unable to resolve my flash problems. Here is the details:
System:
-AMD x2 athlon
-Asus m2-a vm motherboard
-6gb ddr2 ram
-realtek 1gb nic
-xfx nvidia 9600gt
- windows 7
-IE 8/9 attempted
-Chrome attempted
I have so far been unable to get the flash player to load at all. I have tried to load the offline installer as admin user context, and no luck [when i say load i mean the flash player itself, installation of flash has succeeded everytime without issues as have uninstallations.] . I have tried older installers with no luck. i have also tried different browsers. not one combination has worked. I've tried clearing settings on the local 32-bit control panel. However I can't disable the hardware rendering because of the fact it never loads the applet on any of the status pages for me to access.
At current, i have reloaded windows 7 64-bit and am looking for a more in depth answer to see if any ini files or reg settings exist for setting these to software only rendering. However I am not entirely convinced that this is the problem. I think the problem maybe more related to the player specifically not loading the movies or not even properly running the appropriate installed dll`s.
Before you ask, latest nvidia drivers loaded and flash is enabled in add-ons as many of the others have suggested. Please help, this has eaten up a week of my mind now.
Also should note all MS important patches are installed as of 4/8/2012 - and Service Pack 1 is installed on Windows. I've also just completed installing IE 9 on this fresh build of windows 7 64-bit. I've also installed Chrome, this morning and it also received the error "movie not loaded". I'm also using the latest version of 64-bit FLASH (11.x.x.x.x) version that was downloaded this morning.
So I'm now at a stopping point. I cannot use Amazon at all, or Youtube. It appears to load the plugin on some level as I can see the youtube videobox in black and then when I try to right click, it shows "About Adobe Flash 11.xx.x.x.x" or "Movie not loaded"... Thanks again for any assistance you can provide on this.
Update:
After much looking on the forums, I'm now attempting to verify with another functional PC that the actual files are present. I've found that the following files are present on the working system:
The system having the problems appears to be missing alot of these files. The OCX is the only file present. I'm going to see if I can verify what happened here. So hopefully this won't recur. However it looks like there maybe an issue with the installer at this time. I can't imagine how thougth when I've tried downloading the full offline installation version.

This computer has two different versions of Flash Player for Internet Explorer and two different versions of Flash Player for other browsers.
A clean install is recommended:
Windows
Download the current 32 bit uninstaller Uninstaller for 32 bit Operating Systems
Close all browser windows and run the uninstaller
Restart Windows
Delete all remaining files and folders located in the following directories. (tip: copy and paste these paths into the path bar in an Explorer window)
C:\Windows\System32\Macromed\Flas
%appdata%\Adobe\Flash Player
%appdata%\Macromedia\Flash Player
Verify that the file “FlashPlayerCPLApp.cpl” in C:\Window\system32\ for 32 bit systems has been deleted.
Download the following installer files:
32 bit Flash Player for ActiveX (Internet Explorer)
32 bit Flash Player Plug-in (All other browsers)
Physically disconnect from the Internet and run the installers.

Adobe Photoshop CS3 will not run

I reloaded my windows xp 2005 (?) and tried to load my CS3 software. It will not even run. It has been suggested that the software can only be reloaded a certain number of times. I have reloaded this software 3-4 (?) times over the years. Is this the problem or is is something else?

Don't think there is a number of times you can re-install your program. You can only have 2 activated copies, so if you move to a different machine and don't deactivate on the old one it is still considered an activated copy.
But why would you uninstall and re-install your copy? THis rarely solves problems, espeically if you do not run the Adobe Script Cleaner. Also, the preference file is unchanged on a reinstall, so if there were errors in it before, they are still there.

Flash not running in FF but runs in IE and Chrome

Hello:
I am having an issue with Flash not running in Firefox but it is running in IE and Chrome. The main url is http://www.mcafee.com/us/campaign/network-security/virtualized-data-center.html on which there is a section called "ROI Calculator". The download button links to a flash program which opens up
in IE and Chrome but does not open in Firefox. I am using windows 7 professional and Firefox 8. Here is the code for the page http://www.mcafee.com/us/resources/roi/brocade-mcafee-tco/roi-brocade-mcafee-tco.html :

<html lang="en">

<head>
<meta name="robots" content="noindex,nofollow">
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE8" />
<script type="text/javascript" src="http://s7.addthis.com/js/200/addthis_widget.js"></script>
<script type="text/javascript" src="swfobject.js"></script>
<script type="text/javascript">
function openAddThisWindow(v1,v2,url)
                return addthis_open(this, 'email' );
</script>

<link rel="stylesheet" type="text/css" href="history/history.css" />

<title></title>
<script src="AC_OETags.js" language="javascript"></script>

<script src="history/history.js" language="javascript"></script>

<style>
body { margin: 0px; overflow:hidden }
</style>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body scroll="no">
<script language="JavaScript" type="text/javascript">

</script>
<noscript>
      <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
            id="Brocade_ROI" width="100%" height="100%"
            codebase="http://fpdownload.macromedia.com/get/flashplayer/current/swflash.cab">
            <param name="movie" value="Brocade_ROI.swf" />
            <param name="quality" value="high" />
            <param name="bgcolor" value="#869ca7" />
            <param name="allowScriptAccess" value="sameDomain" />
            <embed src="Brocade_ROI.swf" quality="high" bgcolor="#869ca7" width="100%" height="100%" name="Brocade_ROI" align="middle" play="true" loop="false"            quality="high" allowScriptAccess="sameDomain" type"application/x-shockwave-flash" pluginspage="http://www.adobe.com/go/getflashplayer"></embed>
    </object>
</noscript>

<script language="javascript" type="text/javascript" src="http://www.mcafee.com/common/js/s_code-20110804.js"></script>
<script language="javascript" type="text/javascript">
    s.pageName="corp:en-us:direct:resources:roi:brocade_mcafee_tco";
    s.pageName=s.pageName.toLowerCase();
    s.channel="corp:en-us:direct:resources:roi";
    s.eVar21=s.channel=s.channel.toLowerCase();
    s.eVar22="corp:en-us:direct:resources:roi:brocade_mcafee_tco";
    s.prop1=s.eVar22=s.eVar22.toLowerCase();
    s.events="event1";
    s.prop4=s.eVar4="us";
    s.prop5=s.eVar5="en-us";
    s.prop7=s.eVar7="NA";
    s.prop6=s.eVar6="direct";
/************* DO NOT ALTER ANYTHING BELOW THIS LINE ! **************/
var s_code=s.t();if(s_code)document.write(s_code)</script>

</body>
</html>
Thanks in advance for your help.

Too much text :/ I hate generated source - something always goes wrong and you never know what the hell
What about embedding it yourself?
Create empty HTML file, download swfobject.js: http://code.google.com/p/swfobject/downloads/list
And use this block of code. Of course, change name of swf file, width and height. Unpack swfobject.js right next to the html file.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
    <title>SWFObject dynamic embed - step 3</title>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <script type="text/javascript" src="swfobject.js"></script>
    <script type="text/javascript">
    swfobject.embedSWF("myContent.swf", "myContent", "800", "600", "9.0.0");
    </script>
</head>
<body>
    <div id="myContent">
      <p>Alternative content</p>
    </div>
</body>
</html>

HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running". Windows 7.

After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Have terminal NOT run a script when it loads

I recently wrote a basic shell script and saved it as a .command file to run from the desktop. Since then, whenever I open the terminal it automatically runs the script then exits the terminal. If I hide the file (mv pt-noplugs.command .ptnoplugs.command) it simply opens the terminal and closes it immediately. I have tried changing the default shell from bash to something else but this doesn't seem to make a difference. I also don't seem to have a .bashrc file when it normally is /home/user/.bashrc (I'm used to linux). Any help would be appreciated. Below is the script:
# Shell Script to start Pro Tools HD with no waveshell Plug-In
echo "*"
echo "* Script: pt-noplugs.command"
echo "* Please Leave This Window Open Until ProTools Has Exited"
echo "*"
# Move waveshell Plug-In Files to Plug-Ins (Unused)
cd "/Library/Application Support/Digidesign/Plug-Ins/"
mv -v Waveshell-DAE_5.9.1.dpm "../Plug-Ins (Unused)"
# Start Pro-Tools
/Applications/Digidesign/Pro\ Tools/Pro\ Tools\ HD.app/Contents/MacOS/Pro\ Tools\ HD
# Restore Plug-Ins directory
cd "../Plug-Ins (Unused)"
mv Waveshell-DAE_5.9.1.dpm ../Plug-Ins
echo "*"
echo "* Thank You. This Window May Now Be Closed"
echo "*"
exit

I forgot to add: when I login as a different user and load terminal is does NOT run the script mentioned before.

Since installing Yosemite my Quarkxpress 10 is not running correctly. Too slow or crashes. How do I uninstall Os X Yosemite without losing all of my designs?

Since installing Yosemite my Quarkxpress 10 is not running correctly. Too slow or crashes. How do I uninstall Os X Yosemite without losing all of my designs?

Thank you Thomas
First, for changing my question to the right forum. I am new on this and wasn't aware I was in the wrong forum.
Secondly, even though my initial question is not answered as in: I just want to remove Classic, what you say is right. I think now, after writing my long question and seeing your answers, that I should start from scratch.
To answer your question, I bought the new drive to be able to store and back up into DVDs and CDs all the photographs and movies that are still in the computer. I also need to make CDs of my portfolio since I am trying to find a new job and buying a new Mac at this point is out of the question. To upgrade the computer: I just do not have use for OS 9 anymore; I cannot upgrade to the latest Java, Safari or have issues with Flash or other programs; the programs that I have and need will still run perfectly fine or better in Leopard. And even if I could buy another computer I would still like to hang onto this computer for a while.

Audio and video are not running in sync

I'm having a problem with the video and sound not running together. When it first happened as any movie or tv show ect. would play the audio and Video would get further and further off as it would play. I reset my iPad and I thought the problem was fixed. But now they just are off by half a second to a second. It doesn't keep getting further apart like before but just stays consistently off. Why is this and what can I do. I'm a apple nubie and just got my iPad a week ago. I don't want mess anything up any further by tinkering.

Papatodd6464 wrote:
I'm having a problem with the video and sound not running together. When it first happened as any movie or tv show ect. would play the audio and Video would get further and further off as it would play. I reset my iPad and I thought the problem was fixed. But now they just are off by half a second to a second. It doesn't keep getting further apart like before but just stays consistently off. Why is this and what can I do. I'm a apple nubie and just got my iPad a week ago. I don't want mess anything up any further by tinkering.
There's nothing you can do on your iPad to fix this. If it's an iTunes movie or TV show, just email them to see if you can re-download the movie, since you might have a bad download.

Flash swf not running properly in captivate

Hi,
I'm not sure if this is a flash question or a captivate question so I'm posting it to both forums. I have numerous flash cs5 built swfs inserted into a captivate 5 project. All of them are running fine apart from this one. It runs perfectly outside of captivate but within the captivate swf it goes haywire. It's a very simple fla. The only actionscript involved is a stop action. There is a movie clip that uses a number of classic tweens and then there is a layer containing textual explanations for what's happening in the movie clip. When I run my captivate project the swf does one or other of the following:
a) it runs but the movie clip starts earlier than the text and so they are out of synch
b) the text runs as normal but the movie clip does not run at all
c) it only shows the final frame of the swf and nothing else happens.
As I say, it is a very simple fla and I'm at my wits end trying to figure out what's wrong. I don't seem to be able to attach the fla here, so if anybody thinks they may be able to help please pm me with your email address and I will email you the fla file.
Just to note some of the things I have already considered: the text is all set to classic rather than TLF. The captivate project and the fla both publish as3 at 12fps for flash player 9.
yours hopefully!
Maedhbh

See http://forums.adobe.com/message/3327323. I am having the same problem and this may help you out.

Server not running SSIS job in 32bit mode

I have a package that I developed in VS2012 (using the SQL Data Tools component) which collects data from a DBF file using the VFPOLEDB provider, and puts it into a database on a SQL Server 2012 X64 server. The project containing the package has the DebugOption
of Run64BitRuntime set to false. I have imported this package to the SSIS Package Store of a test and live server (identical setups). The VFPOLEDB provider is installed on both, and I can see in the registry of both machines that it's there for 32bit runtimes.
The package runs fine on the test machine, but fails on the live machine. The live instance of SQL does not appear to recognize the 32bit VFPOLEDB provider that is installed.
The only difference in the instances of SQL is that the live environment has an Integration Service Catalog set up, where as the test does not. Looking at the logs of the servers, when the live starts, it runs sp_ssis_startup, and then logs messages about
unsafe assemblies being loaded in. This SP is not run on the test environment because there is no catalog.
The jobs I create have the flag set to use the 32bit runtime, but I can't help but feel that the SSIS Catalog is having an issue with the VFPOLEDB I am using, and not loading it.
I don't really know anything about the SSIS catalog, so is anyone able to suggest any direction I could move in?

I am not sure what you want in terms of job step setup information.
The history is a single message:
Message
Executed as user: MDA\catbert. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 6:52:01 PM Error: 2015-02-03 18:52:01.10
Code: 0xC0209303     Source: NEF Transfer SSIS2012 Connection manager "Source Connection"     Description: The requested OLE DB provider VFPOLEDB.1 is not registered. If the 64-bit driver is not installed,
run the package in 32-bit mode. Error code: 0x00000000. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error
Error: 2015-02-03 18:52:01.10     Code: 0xC020801C     Source: Data Flow Task OLE DB Source [100]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection
method call to the connection manager "Source Connection" failed with error code 0xC0209303. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error:
2015-02-03 18:52:01.10     Code: 0xC0047017     Source: Data Flow Task SSIS.Pipeline     Description: OLE DB Source failed validation and returned error code 0xC020801C. End Error Error:
2015-02-03 18:52:01.10     Code: 0xC004700C     Source: Data Flow Task SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2015-02-03 18:52:01.10
Code: 0xC0024107     Source: Data Flow Task      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 6:52:01
PM Finished: 6:52:01 PM Elapsed: 0.094 seconds. The package execution failed. The step failed.

Mov not running on PC

Similar Messages

Maybe you are looking for