.mov plays fine but is jumpy when imported.
I am exporting footage from a pinnacle studio file that i intend to chop up and cut in with my current project. i exported as a .mov and it plays fine on my mac but when i import it into final cut it is jumpy and terrible, all other clips play fine, any suggestions?
Not enough information. Open the file in the QT player and report exactly what it says in the movie inspector.
Similar Messages
-
MOVs play fine, but Premiere won't play the audio
I have a bunch of MOV files (from a cheap digital camera) that will play fine on say VLC, and they import into Premiere CS5, but when I play them in Premiere, or put them into a Sequence, the video plays but the sound turns to a high pitched beep after 1 second. Every file does this, and all other files (including MOVs from different cameras) are working fine in the same sequence. Any ideas?
I had a similar problem, I'll tell you how I solved it. Understand that I am a newbie at video editing and Premiere Pro. I shot videos on a DSLR (.mov) and then transferred them to my computer. I then imported them into Premiere CS6. The videos played fine, and the sound bars indicated that audio was playing, but there was no sound. The clips I imported played fine in Windows Media Player. I did everything suggested on the forums, but to no avail. Then I thought of something no one else had suggested, and it worked!
I ordered my Rain Stratus computer already set up with Premiere CS6 installed. When I opened a new project, it by default chose Black Magic Design presets, since that is the video card I have. Being a newbie, I just went with that. But since the video I was importing was not captured by my Black Magic video card, it was the wrong choice. It took awhile to figure out, but I finally realized I needed to choose Digital SLR as the sequence preset when I created a new project. Then the audio worked!
One more thing I had to do, though, before it worked: in PremierePro, go to Edit/Preferences/Audio Hardware. I had to change the hardware from Black Magic Audio to Premiere Pro WDM Sound, click ASIO settings, choose my speakers, and then check the box marked "device 32-bit playback" (even thought I have a 64-bit computer.)
I hope that helps someone else from going through the same frustration. -
I have compiled my movie and I downloaded it into iphoto and then transfered it to imovie. The problem is that the movie plays fine, but will not highlight on the
You may be attempting to Share (export) the movie from the Event Library. You need to create a Project, drag clips (or segments of clips) from the Event to the Project, then use the Share menu to export the Project. Movie clips can't be exported directly from the Event. Clips you add to a Project reference (point to) the clips in the associated Event (or Events).
For more information, see the following iMovie Help topics:
Start a new video project -
http://help.apple.com/imovie/#mov3a61ee67
Add video to a project -
http://help.apple.com/imovie/#mov3a62377a
The Help topics are also accessible from within iMovie. Click on the iMovie menu item "Help>iMovie Help".
John -
I imported files from an external hard drive to Itunes on a new computer. they imported & play fine, but the ratings & playlists are gone & i am unable to update any info. I found a file name playlist on old drive & imported now most files are missing! Help!
Can you locate the iTunes Library.itl file on the old drive? Ideally you would have simply copied over the entire iTunes folder structure from <User's Music> on the old computer into <User's Music> on the new one to transfer the library will all playlists, ratings, play counts etc. intact.
tt2 -
I don't understand why on the ipad everything plays fine but when I airplay it to the tv ( 1 metre away) it plays fine for about 20 seconds then the picture sticks and sound jumps....then plays normally until it freezes again.
Hi Gerani30,
Thanks for visiting Apple Support Communities.
You can troubleshoot AirPlay performance issues using the steps in this article:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Best Regards,
Jeremy -
A slide show with audio created in PSE 9 plays fine in edit. When brought to Premier Elements for dvd burn, the audio no longer plays. It appears in the edit, but no audio is played. This happens consistently. What setting might be wrong?
H-SPhoto
That Photoshop Elements 9.0.3 Update has generally been discouraged by the Photoshop Elements gurus. But, I am not going to factor that into this at this point.
This is what I would ask you to look at in the Elements Organizer 9 accessed from the Photoshop Elements 9 or Premiere Elements 9.
a. Create your slideshow in the Elements Organizer 9/Create/Slideshow/Slideshow Editor. Then use the Output option of Edit with Premiere Elements.
From your description, you are probably using the Output Option of Burn to Disc DVD which will take your slideshow directly in the Disc Menu section of Premiere Elements 9. The preferred transfer of the Elements Organizer 9 slideshow to Premiere Elements 9 Editor is by the non wmv route "Edit with Premiere Elements" not the wmv route of Burn to Disc DVD.
Let us explore if any of the above is involved in your issue and then we will decide what next if necessary.
Thanks.
ATR -
Videora movies play fine then sound drops out, help!!!
i have a black 60g 5g ipod that i used dvd decrypter to rip my personal dvd with and then converted to ipod format with videora. the movies play fine for a while then the sound will stop and the movie keeps playing. if i go back to the menu and start again the sound will resume in the spot it stopped for a while and then stop again. can anybody help? i'm using the mpg4 format in videora. please help im lost- chris
sony vaio laptop Windows XPWhen you are using DVD Decrypt, are you taking the 6 channel sound (or best quality channel just below video), as some of the other sound tracks are Directors Cut etc.
If this fails, try running DVD Decrypter again, and check your buffer is not running out at the bottom of the screen. Try testing the VOB which is created by DVD Decrypter in your Windows DVD player, and see if it ok prior to being converted by Videora. Your DVD player should have an option to play a video file from the disk, I am not familier with the Vaio, but this works with InterVideo WinDVD which came with my ThinkPad. -
IMAC DVD Player does not recognizing dvd movie . I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and it will not recognize/play a dvd movie...it thinks it is a blank dvd. The IMAC will play rented dvd movies. The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4) abd in my external Sony DVD Player The dvd move was made/burned on a PC. Why will a dvd movie play on my Macbook Pro and not my IMAC?
Hello:
This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
When the DVD is in the drive (and DVD players is open) click on File>get disk info.
Barry -
Music and videos start playing fine but randomly stop and the volume bar disappears
I have an iPhone 4S and run 6.1.3. I start to play music or videos (youtube, ESPN, Netflix, any) and they start to play fine but then randomly stop. The volume bar disappears as well. But then it reappears and I can play it again. When I do so it plays about 30 seconds, sometimes less, and pauses again. I have to repeat the process. Any idea how to fix or what might be causing the problem?
Try a reset:
- hold both the home button and sleep/wake button down at the same time
- the iPhone will turn off(keep holding) but as soon as you see the apple logo appear release both buttons
Also make sure none of the LCI have been set off especially the one in the charging dock of the iPhone. Read the article below for help in checking this:
http://support.apple.com/kb/ht3302 -
Sound plays fine but the video is too slow to even start a project.
film78
On what computer operating system is your Premiere Elements 12 running on? Have you updated 12 to 12.1 yet? If not, please do so by using an opened project's Help Menu/Update.
Not enough information in order to help you.
Looking for
1. Properties of source media (including file extension and brand/model/settings of camera that recorded the video).
2. Is problem restricted to one particular file in one particular project? What happens if you start a new project? What is the
duration and size of the project when performance is slow and freezing sets in? What are you doing in the program when this happens?
3. Using a pen and tablet device instead of a mouse?
4. Does problem exist if antivirus and firewall(s) are disabled?
5. Please describe computer environment, including dating on video card/graphics card driver version. Did you install the program to the
default Local Disk C? Where are the Scratch Disks directed and how much free space there?
Lots more questions, but let us start here and then decide what next based on your reply.
Thank you.
ATR -
I do not use the function very often but AirPlay has worked fine in the past (several OS updates ago on both iPad and apple tv). The audio plays fine but no video???? Any suggestions.
interesting...... you know i tried other media and it worked fine. i was trying to play 'amazon instant video'. when you say 'blocked ... by the providor' it seems to me that Amazon would have no interest in restricting the play. is it the producer of the content that resticts the play through some form of licensing or is it apple that restricts amazon play by limiting access to technology? either way its anti-competitive.
-
Youtube plays fine but not Facebook or other site videos, it says I am missing a plugin?
When I use Youtube the videos play fine but on Facebook and some other sights the videos will not play. I just get a message that says a plugin is missing. Everything works fine on IE. I just downloaded Mozilla last night.
hi Brandonacker, you probably need to install the adobe flash player plugin for those sites to show video content, which you can download from https://www.adobe.com/products/flashplayer/distribution3.html (use the windows exe-installer for plugin based browsers)
-
Certain music videos will not play in iTunes. The music plays fine but not the video. No picture.
Certain music videos will not play in iTunes. The music plays fine but not the video. No picture. Same with the iPod. Other videos in the library play fine. Help.
Regular playlists vs smart playlist does not make a difference. What I noticed is that some videos create this behavior and some not. I created 2 videos and 2 music playlists, one with 2 songs and 2 videos (that I encoded myself with Handbrake). Another list with 2 videos and 2 songs, videos encoded with Handbrake, but that I noticed they triggered the behavior. The first playlist played fine, with no problems. The second one, created the problem. When I look at the video, it is the same type of video (bit rate, audio channels, etc...) I don't see why it would do that.
Later I will test: playing those videos in question and then selecting songs to see if they play. -
firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.
Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems. -
I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?
I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
DRM audio is not effected as this is handled by the native iOS music app.
As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.
Maybe you are looking for
-
Media Encoder 5.5 Windows 7 - Only see 4 export formats
Windows 7 Media Encoder 5.5.1.12 I only see 4 export format in export settings FLV F4V H.264 MP3 ALL other formats are not displaying. What should i do? I ran the update and still only 4 formats. I am trying to encode a Windows Media file and WMV is
-
Need help on upgrading operating system from Mac OSX 10.3.9
We have a Imac G5 with Mac OS X v 10.3.9. We want an upgrade to run new ILife stuff. We don't know what we are doing. What should we get to update the operating system, where, and how do we upgrade the system? Are there any particular requirements th
-
I am trying to embed a video in a cfm page. The FORM page before is where they can link the video URL and the preview page is where they can view the video (and other information) before it get submitted and saved in the database. on the FORM page I
-
Problem Importing Entourage into iCal
I've had several problems with iCal recently but the most frustrating one is that I can't import from Entourage. I've selected File > Import > Import Entourage Data but the application essentially locks up and no data is imported. When I Force Quit i
-
How do you show sender in Mail message list
Hi I've recently migrated to Lion and am finding the new layout of Mail frustrating as it shows my mail by the recipient rather than the sender. As the recipient is ususally me, I have what appears to be a inbox of emails to myself but I have to ope