MOV to FLV Audio Loss

I am having problems with converting MOV to FLV. I'm using a
PC.
Here is what happens. I use Flash CS3 Video Encoder to
convert a MOV to FLV. Then when I embed the FLV into an HTML page
using Dreamweaver the movie seems to play fine but about half way
through, the audo drops out but the video keeps going. I tried
medium and high coversion but the same thing.
Any ideas?

Welcome to the forums.
(PAL 1024kbps / 29fps / 500x280)
That's weird, PAL is 25fps 720x576.
converted into an flv from a quicktime mov
What did you use to convert? Perhaps try a different converter?
Cheers
Eddie

Similar Messages

  • Converting Mov to FLV audio loss

    Hi all,
    This might be something someone could help me think. The problem I seem to be encountering is a loss of audio in the later quarter of videos converted into an flv from a quicktime mov (PAL 1024kbps / 29fps / 500x280), this typically happens on a file durration of upto 2 or 3mins. It doesnt happen when converting from a wmv, (also trying an AVI) although the outputed quality tends to be a lot less clearer using some of these other formats. Interestingly, when previewing the MOV in a quicktime player theres no signs that this will happen / no loss of audio / no blips in the frames around the later of the vid. Both the On2 VP6 or Sorrenson Spark cunjor the same fault.
    I would love to here someones take on this
    Many thanks
    Matt

    Welcome to the forums.
    (PAL 1024kbps / 29fps / 500x280)
    That's weird, PAL is 25fps 720x576.
    converted into an flv from a quicktime mov
    What did you use to convert? Perhaps try a different converter?
    Cheers
    Eddie

  • When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

    When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

    When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
    That would depend on your work flow. MOV is the generic QuickTime file container and is not related to any particular data compression format. If you perform a simple "Save" or "Save As..." action that merely copies the data in the WAV file to an MOV file, then the data remains unchanged and maintains its original quality. If, on the other hand, your transcode/re-compress the original data to a different compression format, then there is always the potential for some loss in quality. Depending on the codec and/or settings, the potential loss could be inaudible to severe.

  • Encoded FLV audio cuts out half way

    I'm trying to encode a.mov file to .flv using Flash Video
    Encoder CS3. Every time I encode, no matter what settings I use,
    the audio just stops half way through when played back in Flash. If
    I encode in Squeeze, it works.
    What's the deal?

    I am having the same problem. I am outputting a video from
    Final Cut Pro to QT, then checking my QT file to make sure the
    audio is there, then I encode in Flash Video Encoder CS3, and like
    the person below me, the audio cuts half way through the video.
    I was using a 480x360 QT file and converting to 15 fps
    480x360 flv, audio cuts out. Using a 320x240 QT file and converting
    to 15 fps 320x240, audio is there.

  • I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another s

    I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens.  All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
    My Iphone5 was replaced and having same Problem. Only does this when using bluetooth for talking.

    I have the exact same issue... I've been using a Jabra Extreme2 and just this weekend, bought a Plantronics Marque2 and today had the same issue, so it's clearly not the headset but the phone or OS.
    I might try a restore and see if it helps...

  • Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    haben
    From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
    A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
    Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
    User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
    presets there for the QuickTime choice there.
    What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30)  or something else? Do you know if this camera is recording with a variable or
    a constant frame rate?
    Please review and consider and then we will decide what next.
    Thank you.
    ATR

  • How do I convert my iphone videos (.mov) to .flv files?

    How do I convert my iphone video (.mov) to .flv files?

    Or try to search in the App Store.
    I am using ifunia media-converter, the one that got from Mac App Store, successfully converted dvd and HD video for me, seems it support converting mov to flv.

  • Best converter for .Mov to .Flv?

    Hi
    I need to find a video converter for .Mov to .Flv(or maybe Mp4 or mpeg).
    I found out that you cant create a playlist in .mov...so i need to convert. Youtube's conversion seems to suck though...can i get a better quality .flv conversion?
    I have a lot of videos +around 70+ that need to convert to a format with playlist functionality for mac and windows.
    Whats a good software to convert to flv.or the other format? currently my videos are 960x540.
    Help is appreciated.

    MPEG Streamclip with the Perian plug in should work.
    Both are free.
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    http://www.perian.org

  • .mov to .flv converter

    Can anyone recommend a good .mov to .flv converter?
    I need to convert my FCE files to .flv for another platform.
    Thanks!
    Doug

    Try iSkysoft (free evaluation available), works fairly well...
    http://www.iskysoft.com/video-converter-mac.html

  • Mov to flv

    I want to upload a home video to a site that only accepts .flv. My movies are .mov.
    Is there any conversion program that will convert .mov to .flv?

    Happens that I came looking for an answer to the same question. Saw the "export as H264" idea. Tried it. It wouldn't play in the program to which I uploaded it. Maybe it has to do with the "Flash 9" issue mentioned -- dunno.
    I am aware of "free" sites where the conversions can be done and I have used them. But I am now looking to do quite a bit of these conversions and I am looking to download a good converter. Looking (obviously) for best price and quality of product.
    FYI the free sites:
    http://www.zamzar.com/signup/#go
    http://www.youconvertit.com/ConvertFiles.aspx?RadUrid=dca7b294-3250-449a-9b33-43 3c51dc5de2

  • Fix for iPhone 5 Bluetooth audio loss / disconnect?

    I recently upgraded from an iPhone 4s to an iPhone 5.  I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s.  However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens.  All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
    Is is important to note that I am not the only one experiencing this issue:
    This is a link to someone using the Motorola H19txt headset experiencing the same issue
    https://forums.motorola.com/posts/94ac15ad7c
    If you go to the Plantronics website and look at the "Ratings and Reviews" on the Voyager Legend you will see the same issue reported:
    http://www.plantronics.com/us/product/voyager-legend (next paragraph is taken from the review since there is no direct link to the review.
    Really nice Headset unless you own an Iphone 5. I own several Plantronics headsets and have always loved the quality/ performance. This headset seems not to be compatible with the new Iphone 5. In the middle of a conversation it will lose all incoming audio. This leaves you trying to switch audio sources really fast in order not to lose your phone call. Ive tried 3 legend headsets and they all do the same thing. Hopefully this gets fixed soon because the headset is really nice
    Since this issue appears to affect multiple headsets from multiple vendors, I think it is fair to conclude that it is an issue with the iPhone5 bluetooth itself.
    I am posting this as a new discussion as I don't see any other posts specific to this iPhone 5 Bluetooth issue.  I would have reported this as a problem to Apple, but don't seem to be able to find a way to do this on the web.  Hopefully they are already aware, but if not, maybe they will see i here.
    If anyone else has experienced this issue, or has recommendations on how to prevent this from happening, I would appreciate your feedback / additions to this post.

    I upgraded to an iPhone 5 last year, and since that time I have had the audio drop out problem at intermittent but bothersome rates. Interestingly, the audio drop occurs only with some Bluetooth headsets, and never with others. The headsets that have the problem are all over the head devices with strong noise suppression and very long battery life. The problem started with the Parrott XT250+, 20 hours talk time and fantastic noise suppression.
    I then purchased the RK400 RoadKing, it has 30 hours talk time, and is a little lighter and less geeky looking.
    Also superb, but it cuts out more often than the BlueParrot.
    However, I have a Bose in ear Bluetooth which never loses audio.
    These heavy duty Bluetooth headsets are popular with truckers. They indicate greater distance to/from the device, about double. 60 feet vs. 30 feet, as I recall.
    There must be a Bluetooth standard they adhere to that causes the audio loss problem in the iPhone. Just clicking to iPhone and back to the bluetooth will clear it. I also sometimes have a funny noise that indicates the audio is out, but usually it's noticing the other person not speaking. It has caused some serious problems on important business calls. I bought these headsets, and the iPhone5, to handle these calls.
    Apple's Genius bar folks do not appear to have heard of this problem. I was asked to demonstrate it, which i did, eventually I was given a brand new iPhone5 to address the problem. The results of that were interesting, the rate of drop about doubled on the new phone over the old.
    I was told when the phone was replaced, and again when I went back, that I would probably have to erase everything on the iPhone, set it up as a new phone on iTunes on my computer, and reload whatever apps I wanted (Apple knows which you paid for). I went through this procedure. I didn't suspect it would work, but I tried it. It didn't work. And again, the frequency of the drop out varied. This leads me to believe it may be some odd memory or cache overload since different phone utilization of space seems to be an affecting variable.
    That is, I had all but 8 gigs utilized on my 32 gig iPhone 5 when the problem began. When I had the phone replaced and backed up, I trimmed back some of the apps. When I wiped the phone's drive and reinstalled, I wouud up with more memory available, as I deleted 1000 photographs during the reinstall.
    It's frustrating, but I have encountered such weird anomalies in the past. I am glad this forum exists to document the problem and hope Apple will notice, acquire a few of the problem headsets, and resolve the bug.

  • How To open FLV audio files on my MacBook Pro

    How do i open FLV audio or video files on My MacBook Pro
    I run on My Macbook Pro OS X YOSEMITE 10.10.2
    kind regards and Thank you
    Solomon Tesfaye
    System Version: OS X

    Video Player - VLC

  • Facebook has challenged the copyright of a movie using iMovie audio. Am i allowed to share movies made using audio clips from iMovie?, Facebook has challenged the copyright of a movie using iMovie audio

    Facebook has challenged the copyright of a movie using iMovie audio. Am i allowed to share movies made using audio clips from iMovie?

    Just curious as to why it's coming up as a copyright violation?
    Hard to say.  I think FaceBook errs on the side of abundance caution when they detect anything that sounds like music.
    It's also possible to that people use samples of various pieces of iLife audio contest to create a piece of work that they then copyright.
    Matt

  • FLV audio increasing on import

    Hey guys,
    I'm importing FLV files into Captivate 7, and I'm noticing an increase in volume when I import them into the course. However, the regular MP3 files throughout the course remain the same volume. Outside of the course, all audio is from the same batch and IS definitely the same volume, but the FLV audio is changing on import.
    Anyone else have this problem? and know how to fix it in Captivate?
    Thanks in advance

    YOu're going to have to give complete specs for what you're importing from where and how you're importing. Need to give complete specs of the media, video and audio.

  • Converting movie to .FLV for internet?

    I'm making much progress developing movies in Imovie, but now I want to try and post them to our Web site.
    We have set up an .FTP site, but need to convert the movie to .FLV to post it.
    Can I do this with Imovie, or do I need to purchase a Sorensen Squeeze-type product.
    Thanks,
    John

    for creating FlashVideo, you need 3rd party tools, your options are...:
    Adobe's Flash, the Original, 699$
    Video2swf, shareware, 45$
    ... probably, there are other tools allowing the conversion of dv/mov to flv... search the usual suspects as versiontracker.com et al....
    helpful?

Maybe you are looking for