.mov umwandeln, nur welches Format?

Servus Forum,
ich hoffe es verstößt nicht gegen die Regeln wenn ich vom englischen ins deutsche Forum wechsel, aber ich tu mir auch wesentlich leichter so. Ist außerdem quasi ein neues Thema.
Ich habe .mov-files erhalten die mit dem leidigen Thema XDCAM verbunden sind. Ich benutze PrPro CS5 Vollversion auf einem Windows 64-bit System. Aufgrund des mangelnden Codecs kann ich dieses File nicht mit PrPro bearbeiten. An diesen Codec zu kommen scheint unmöglich bzw. unsagbar teuer. Upgrade auf CS6 kommt aus kostengründen auch erstmal nicht in Frage.
Also verfolge ich jetzt die Taktik der Umwandlung der Daten auf einem von zwei Wege.
a) Umwandlung mit einem Konvertierungsprogramm (am besten Freeware)
b) oder aber bei einem Kumpel über CS6 (was angelbich damit umgehen kann) in ein anderes Format rendern lassen.
Jetzt habe ich dazu aber eine prinzipielle Frage weil ich ein ziemlicher Neuling bin.
Welches Videoformat empfhielt ihr denn? Was ist das Format mit dem ich am meisten Qualität der Ursprungsdatein behalten kann?
Und, welche Software zur Konvertierung würdet ihr empfehlen?
Lieben Dank schon mal Vorab und schöne Grüße
Thommy
PS: Hier ein Auszug über die .mov-files aus MediaInfo:
Allgemein
Vollständiger Name :
C:\Users\Thommy\Desktop\Vor der Kirche.mov
Format :
MPEG-4
Format_Commercial_IfAny :
XDCAM EX 35
Format-Profil :
QuickTime
Codec-ID :
qt
Dateigröße :
623 MiB
Dauer :
2min 24s
Modus der Gesamtbitrate :
variabel
Gesamte Bitrate :
36,2 Mbps
Kodierungs-Datum :
UTC 2012-08-05 20:39:31
Tagging-Datum :
UTC 2012-08-05 20:39:59
verwendete Encoder-Bibliothek :
Apple QuickTime
©TSC :
25
©TSZ :
1
Video
ID :
1
Format :
MPEG Video
Format_Commercial_IfAny :
XDCAM EX 35
Format-Version :
Version 2
Format-Profil :
Main@High
Format-Einstellungen für BVOP :
Ja
Format-Einstellungen für Matrix :
ausgewählt
Format_Settings_GOP :
M=3, N=12
Codec-ID :
xdvc
Dauer :
2min 24s
Bitraten-Modus :
variabel
Bitrate :
35,0 Mbps
Breite :
1 888 Pixel
Width_Original/String :
1 920 Pixel
Höhe :
1 062 Pixel
Height_Original/String :
1 080 Pixel
Bildseitenverhältnis :
16:9
Modus der Bildwiederholungsrate :
konstant
Bildwiederholungsrate :
25,000 FPS
Standard :
Component
ColorSpace :
YUV
ChromaSubsampling :
4:2:0
BitDepth/String :
8 bits
Scantyp :
Interlaced
Scanreihenfolge :
oberes Feld zuerst
Bits/(Pixel*Frame) :
0.698
Stream-Größe :
596 MiB (96%)
Titel :
Apple Video Mediensteuerung / Apple Alias-Datensteuerung
Sprache :
Englisch
Kodierungs-Datum :
UTC 2012-08-05 20:39:31
Tagging-Datum :
UTC 2012-08-05 20:39:59
colour_primaries :
BT.709
transfer_characteristics :
BT.709
matrix_coefficients :
BT.709
Audio
ID :
2
Format :
PCM
Format-Einstellungen für Endianess :
Little
Format-Einstellungen für Sign :
Signed
Codec-ID :
sowt
Dauer :
2min 24s
Bitraten-Modus :
konstant
Bitrate :
1 536 Kbps
Kanäle :
2 Kanäle
Kanal-Positionen :
Front: L R
Samplingrate :
48,0 KHz
BitDepth/String :
16 bits
Stream-Größe :
26,4 MiB (4%)
Titel :
Apple Ton Mediensteuerung / Apple Alias-Datensteuerung
Sprache :
Englisch
Kodierungs-Datum :
UTC 2012-08-05 20:39:31
Tagging-Datum :
UTC 2012-08-05 20:39:59
Menü
ID :
3
Dauer :
2min 24s
Titel :
Zeitmarken-Mediensteuerung / Apple Alias-Datensteuerung
Sprache :
Englisch
Kodierungs-Datum :
UTC 2012-08-05 20:39:59
Tagging-Datum :
UTC 2012-08-05 20:39:59

OldAlf Danke für deine Antwort! immerhin etwas
Ja ich habe alles ausprobiert was das forum etc so her gegeben hat. Helfen kann wirklich nur dieser "calibrate(x) xd" codec, kostet aber 150 $. CS6 könnte anscheinend auch helfen, allerdings will ich nicht teuer upgraden.
Also darum bin ich bei der Umwandlung gelandet.
Und da ist meine Frage etwas allgemeiner. Welches Videoformat ist denn emfpohlen? In welches würdet ihr umwandeln?

Similar Messages

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

Yes. A couple of ways that might work.
First Way
What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence. Does it display correctionly?
OK, select the clip in the hd timeline and copy (command-c). Now go to the HD sequence with the material that's distorted. Select all (command-a) and paste attributes (option-v) and choose basic motion and distort. That should maek things work. What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence. That I'm pretty sure you'll have to redo.
Second Way.
Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline. You then should be able to reconnect these clips with your original HD media.

I have created a movie in 16:9 format. I have created an iDVD pane in 16:9 but when I preview the movie that pane changes to 4:3 and burns the DVD as a 4:3 movie. How can I stop that, please I am in Snow Leopard, using FCE4.0.1?

I am using Snow Leopard and have created a movie in 16:9 format (SD not HDV) I created a movie which stays in the 16:9 format in fcp file, .mov fiule and MP4 file. I created an iDVD pane in 16:9 but when I play the movie in the iDVD preview window the iDVD pane switches to 4:3 and it burns the DVD in 4:3. How can I stop this so I get a16:9 DVD. Thanks for any help offered
James Bowman

Hi
As I see this I see two parts
• Howto go from FinalCut to iDVD
• Howto set iDVD right
In FinalCut Express (to 4) or Pro (to 6 - most probably 7 too)
• One has to set Anamorphic in the Browser window - menu columns
• Export as QuickTime movie .mov - NO QUICKTIME CONVERSION
In iDVD there are TWO places to set - WideScreen
- Start a NEW iDVD project - AND HERE SELECT WideScreen 16:9
- in Project - select Projectinfo
- now set WideScreen 16:9 - Here too
This use to work for me.
FOR FinalCut Pro-X - I have not a Clue - as I don't use it. SORRY
BTW - There is a good practice to before BURNING the DVD do
• Save as a DiskImage
• Test this by using DVD-Player tool
And if it is OK Size and All - then burn it by using
• Disk Util tool
• here set down burn speed to x4 or less (less burn errors = plays on more devices and better)
• Not using Memorex or NoName etc cheap media - as they usually DO NOT WORK as Video-DVDs
• I use Verbatim DVD-R as they play on more and even older DVD-players
Yours Bengt W

How do I export FCP movie to a WMV format (Windows Media Player friendly)?

I am puzzled. How can I export FCP movie to a WMV format or Windows Media Player friendly?
Thanks in advance.

You need a third party app to do this... AVI is the only format that you can export from FCP that's windows media friendly... WMF's can be exported with flip4mac... http://www.flip4mac.com Probably the best of the apps...
Jerry

DVD movies to iPod video format

I often travell on official business, I am trying to rip a DVD to my ipod. My friend told me that Sothink ipod- converter can convert DVD movies to IPod video format. I have downloaded and try it,I think the Sothink IPod Video Converter is designed to be an easy company for my IPod.
IBM Windows XP no

If you want a really organized package for ripping your dvds into .mp4 "ipod" format use the dvd Decrypter and Videora ipod conveter. They are very organized and they put you in control of the video/audio settings... And it couldn't be easier. Here are the links if you wanna give these FREE programs a shot
Videora ipod converter - http://www.videora.com/en-us/Converter/iPod/
Dvd Decrypter - http://www.mrbass.org/dvdrip/
ps... You need both because after ripping your dvd it becomes a .vob file..Ipod cannot read this so you must use videora to make it an .mp4 "ipod friendly" format.. Reply if problems occur please!!! Thanks...

TS4163 Every time I try to export my movie into a Windows Format from compressor it shrinks the movie to 27 seconds.WHY? HELP

Every time I try to export my movie into a Windows Format from compressor it shrinks the movie to 27 seconds.WHY? HELP

Probably because you have the free version of Flip4MAc from Telestream that limits exported files to 30 seconds or so. There ae several paid versions – depending on your requirements
Good luck.
Russ

I bought my macbook pro 2 months a go..it has become very slow as i don't have movies etc. should i format my mac , please advice ???

i bought my macbook pro 2 months a go..it has become very slow as i don't have movies etc. should i format my mac , please advice ???

Have a read here...
http://support.apple.com/kb/HT1147
http://www.thexlab.com/faqs/maintainingmacosx.html
http://www.thexlab.com/faqs/performance.html

Converting home movies to apple tv format

One more question, please.
I converted my 1280 x 720 home movies to Apple TV format in iTunes and they were "downrezzed" to 960 x 540.
Why? And can I avoid this somehow?

I wouldn't worry about it. many people are concerned about the resolution without giving a thought to datarate. Your tv is limited to the bitrate it can play, at a fixed bitrate a 1280 x 720 movie will have less info per pixel (macroblock-technically) than a 960 x 540 so whilst there are more pixels in 1280 x 720 those in the 960 x 540 movie are higher quality and there is little difference, indeed my tests generally show 960 x 540 to be slightly better.
You could reduce the frame rate of 1280 x 720 to allow it to play on the tv, but this will likely introduce jittery motion.

How do I make a DVD copy of a file? And does the file have to be converted from mpeg or mp4 or.MOV to a different format before it can be copied and is readable by DVD? Thanks.

How do I make a DVD copy of a file? And does the file have to be converted from mpeg or mp4 or.MOV to a different format before it can be copied and is readable by DVD? Thanks.

Great hearing for you all! I thought I was all alone this past weekend. I did learn a lot this weekend. I really like the InDesign product.(half-the-battle) But to be helped by the prestigious “Sandee Cohen” was an honor indeed.” I ordered the InDesign CC today. Peter, I appreciate all the feedback on Lynda too. They are loaded with lots of good videos. Derek too honed in on one of the most important aspects! Since I have been working with Word for most of the first portion of the book this will be a big help. I looked at the comments big help ! Thanks a ton ALL! Have a wonder day or evening whenever you read this reply.

How do I import movies with an AVI format taken with a digital SLR?

How do I import movies with an AVI format taken with a digital SLR?

If you cannot import using File Menu > Import Movies... You'll have to convert them on a Mac.
You will need to use a free app called MPEG Streamclip from Squared 5.
Basically, you drag the .mts file into MPEG Streamclip. Then use FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your codec. And it will save out to a .mov file and iMovie will edit this format like there was no tomorrow

Does the iPod Classic 7th generation support movies in the HD format?

Does the iPod Classic 7th generation support movies in the HD format as well as SD or just SD?

No, the max resolution for video playback is generally 640x480, as stated in the specs
http://www.apple.com/ipodclassic/specs.html
The screen is actually half of that resolution, at 320x240. HD at 720p is 1280x720. HD at 1080p is 1920x1080

Query regarding conversion of Quick Time movie files to .swf format

Hello Everyone,
Is it possible to convert QT movie files to .swf format using
any tool ?
Will it significantly reduce the file size ?
Suppose we have a QT movie file of size 3MB , when it is
converted to .swf
format what will be its size ?
Then can we play this .swf file using QT player or we require
flash player
to do so .
Kindly answer these queries.
Thanking you,
With Best regards,
Anil.

Sudeshchan Shetty wrote:
> Is it possible to convert QT movie files to .swf format
using any tool ?
Hi Anil.
Yes, you can. You can import QT movies into Flash and embed
the movie and then
export an swf version of it. You can also convert teh video
to a FLV (Flash
video) and have a swf that provides the controls and player
for it.
> Will it significantly reduce the file size ?
File size probably will go down but that depnds on what
compression the orginal
QT has and what compression you use when importing to Flash.
I'd say start with
a high quality QT, then try various compression levels when
importing to get
the best size to quality balance.
> Suppose we have a QT movie file of size 3MB , when it is
converted to .swf
> format what will be its size ?
Is hard to say - as mentione dabove, depends on what the QT's
compression is.
> Then can we play this .swf file using QT player or we
require flash player
> to do so .
You'll have to play the swf through Flash. Why would you wnat
to play it
through QT?
What's the output for - CD/web? I'd suggest FLVs ratehr than
an embedded vidoe
into a swf as you can get better quality control and
playback.
regards
Dean
Director Lecturer / Consultant / Director Enthusiast
http://www.fbe.unsw.edu.au/learning/director
http://www.multimediacreative.com.au
email: [email protected]

Having trouble viewing movie in a MV4 format on Mac computer, Having trouble viewing movie in a MV4 format on Mac computer

Having trouble viewing movie in a MV4 format on Mac computer, Having trouble viewing movie in a MV4 format on Mac computer

You can convert them with this:
http://www.m4vconvertermac.net/

How to export HD movie to you tube format

how to export HD movie to you tube format
thanks

All I do is to export the iMovie project to Quicktime using the 'compress movie for Web' setting, and then upload it to YouTube.
Seems to work OK!

I cant play movies in the avi format

I download a movie that is avi format, but when i put it into quicktime it says it wont play it. Help please.

Hello, IPODTIM,
Do you know WHICH avi format was used to make the movies? That is, which CODEC?
Do you get a viewer window with a warning message? What does the message say?
Do you get a message, but NO viewer window? What does that message say?
If you get the window and a message, close the message, but not the window (not by clicking "close," if that's what one of your options is, but by clicking the other option, whatever it is it might be "ok" or "continue" or...??? - different kinds of files prompt different messages).
Then click "Command-i" and note what it says immediately after "format"
That will be the info on the codec.
If you've got a divx (or 3ivx) file, the solution will be one sort of thing; if it's IV50 (or one of the other Indeo codecs) it will be something else; etc., etc. (Both of those, by the way, can be viewed by QuickTime with some add-ons, though the Indeo files must be watched in QuickTime Classic or OS 9. Some others may require a different viewer - most likely VLC, which is available at no charge.)
Having had problems with AVIs in the past, I can help with some of these (specifically, those named above). Other readers can no doubt help with the rest.
Leonard

.mov umwandeln, nur welches Format?

Similar Messages

Maybe you are looking for