Move a group of keyframes?

I want to multiple select a group of audio keyframes and move the whole group of them forward or back without moving the clip. How do I do this?
I see that you can use the Range select tool to select a group of audio keyframes. How do you move a group of audio keyframes without moving the clip?

I tried the command myself and in FCE 3.5 it works exactly as DM describes, that is, it does not work as described in the Help (and 3.5 Help has the same description quoted by DM).
So it seems it's not possible to select just keyframes in FCE.
Piero

Similar Messages

How do I move a group of tabs before closing a window?

I recently lost all my custom settings on Firefox after an aggressive tech support person "cleaned" my browser settings. When this happened, I lost the ability to move my open tabs to a new group before closing the window they were in.
Previously, when I had multiple windows open, and I initiated an "Exit" or "Close" command on one of the open windows, 2 things happened:
(1) First I received a warning message asking me if I wanted to close the window
(2) Then I received a second warning message asking me if I wanted to move my tabs before closing the window.
Now, I only receive the 1st message, and I am no longer offered the option of moving my tabs to a new window before closing the current window.
I've tested this both with and without the Tabs Group Manager which I was using prior to the time my browser was "cleaned", and I still have not found a way to restore this missing feature.
Unfortunately, I don't know if this feature/option is:
-- provided as a default in Firefox
-- a customizable feature in Firefox, or
-- a feature in a Firefox add-on.
Can anyone tell me where/how to restore this option to move a group of tabs before closing a window?
Thanks,
Metta

Thank you, guigs2, for your feedback, and my apologies for the confusion. After rereading my question, I realize I made a couple of typos in my original help request which cannot now be corrected. Specifically, the 2nd sentence in the first paragraph should have read:
"I lost the ability to move GROUPS of open tabs to a new WINDOW before closing the window they were in."
This means that, as far as I can tell, neither of your plugin recommendations applies:
-- Apparently, Tab Mix Plus only applies to manipulating tabs WITHIN the existing window and, unless I am missing something, I did not see any reference to the option I'm looking for -- specifically, an automatic prompt offering to move groups of tabs to a new window before closing the existing window.
-- Unfortunately, the other plugin you mentioned (Tag Cloud) appears to be non-functional in the current version of Firefox, based on the most recent user reviews.
In light of this, I will consider the possibility of resubmitting my question with the typos corrected -- and, in the meantime, if there is any additional feedback that you (or anyone else) can offer, I would be most grateful!

Move Protection Group from One DPM server to another DPM server

Hi Mike,
Can we move Protection Group from one DPM 2012 SP1 to another DPM 2012 R2 version? If yes then what is the steps to perform that. Also i am running DPM servers with co-located and non-colocated configuration. What would be best as per best practice? Because
my 95% backup are SQL backups.

Hi,
There are no provisions in DPM to move protection groups or protected data sources to a new DPM server and maintain the recovery points. The best you can do is to stop protection on DPM1 and retain the replica, then run the setdpmserver.exe on the
protected server and point it the DPM2 server. On DPM2, run the attach-productionserver.ps1 script to establish agent communications, then make new protection groups and re-protect the same data sources. After the retention goals are met, delete
the replica from under inactive protection group on DPM1.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

How do I move a group of photos from iPhoto to a thumb drive?

How do I move a group of photos from iPhoto to a thumb drive?

1. Select photos with Command key and drag them to Desktop.
2. Copy them to the external disk

The right-click "move to group" menu item has disappeared, how can I get it back?

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/813094?]</blockquote><br>
This menu option has been there since I started using the beta. It disappeared during one of the beta revisions, but was back for RC1. In fact, I just used it the other day, but now it is not there. What is my problem?

OK,
I solved my own problem. For some reason, if I enable the menu bar, the option comes back, and when I disable it it seems to stay ..... for now. Bug maybe?
Note,
I even installed the Menu Editor 1.2.7 Addon (which showed the "Move to Group" option enabled, and that still did not solve the problem.

Material Ledger Movement type Groups

I need to activated ML in a SAP ECC 5.0 client, But When I add entries in OMX7 (Define Movements type groups of Material Ledger) I can not modify "Revaluation of consumptios" field. Is there any dependence I need to review before add a group?
I have been reviewing other clients and it is possible. Why I can Add groups but not change this field?

I guess the revaluation of consumption functionality resides in the financials extension. Therefore a precondition for that setting might be to switch on the extension.
best regards,
Udo

Flash CS5: Is there a keyboard shortcut to move to the next keyframe?

I know there are keyboard shortcuts to move to the next and previous frames -- "." and "," but they're not really what I'm referring to. Also, these keys don't necessarily move to the next and previous frames, rather it just seems to move the red playhead instead of the blue highlighted box (which represents the current frame). This is something I'm also confused about with this keyboard shortcut.
I would like to know though, if there is a keyboard shortcut to move to the next keyframe (each frame that begins with a dot). Thanks for your help.

While I am not quite sure what you mean with
"each frame that begins with a dot"
you can use jsfl to program your own macros/shortcuts
In your case start on page 575 of this document
http://help.adobe.com/en_US/flash/cs/extend/flash_extending_reference.pdf
How to get all keyframes of a specific layer:
Helpful JSFL Scripts for Indexing the Flash IDE Stage | Simplest Explanation

Is there a way to move a group of tabs to a new window? I know how to move one tab to a new window, but is there a way to mark a group of tabs and move them to a new window?

Is there a way to move a group of tabs to a new window? I know how to move one tab to a new window, but is there a way to mark a group of tabs and move them to a new window?

* Tab Mix Plus: https://addons.mozilla.org/firefox/addon/tab-mix-plus/

Cons hierarchy restructuring -- Move a group with its subgroups to another

We need to restructure the consolidation hierarchy as per management decision.
Need to move a consolidation group along with the sub groups and units under it to another group that is in parallel (at the same level in the hierarchy) with the group that needs to be moved.
e.g. Cons Group CG10 (with parent unit CU11) is the top group and CG20, CG30 and CG40(with parent units CU21, CU31 and CU41 respectively) are under it and groupos CG41 and CG42 are under CG4.
We now need to move group CG40 along with its units and sub groups under CG20. The parent unit CU41 is currently 100 % owned by CU11 and will need to be transferred to CU21.
Please suggest the best way to handle this.
Do we need to create a new group along with new sub groups under CG20??
Or it's Ok to create just one new group for CG40 and move the subgroups CG41 and CG42 as they are.
Please advice ASAP.

You can't move a cons group within a fiscal year, so you may need to create a CG40b, CG41b, CG42b (i.e., new version of the groups).
If it's the end of the year, it may be possible but probably not advisable to try and move the groups themselves, but I assume the system would complain. I've never tried it myself, and don't know how the transfer would work if the old groups were gone.
I would create CG41b, CG42b. Set the divestiture date for the units in the CG4x groups, add the units and first consolidation dates to the CG4xb groups, set accounting techniques, etc.
Create an organization change number with sender CG41 and receiving CG41b. Ensure you have the prepration for consolidation group change tasks configured in your task hierarchy. I've always had two tasks, one for 02/12 (before elims), and another for 22 (after elims but before CoI).
In the additional financial data, create total transfer activity for the units in question, referencing the Org Change number created earlier.
Execute the consolidation as early as possible during the close, even if it's just preliminary data, and have the business verify the postings seem reasonable.
Hope that helps,
Chris

Movement type group in CIN subcontracting

hi
What is the relevenace of meovement type group in SAP CIN.
there are two movement type group 0001 & 0002 .......what is the relevance of these groups in subcontracting and if a movement type is not assigned with these groups how does it impact in system. On which basis a movement type is assigned to them.
if i assign movement type 101 to group 0002 is there anything wrong in it
I want to understand there significance and impact

Hi,
The logic is quite simple to understand
Lets start from beginning
Step 1>
First we need to define subcontracting attributes in CIN customizing
Logistics General --> Tax on Goods Movement --> India --> Business Transactions -->Subcontracting -->Subcontracting Attributes
Here we maintain entries for your Excise group , Excise TT (57FC) ,Sub Transaction Type (01)
Now here you will find 2 fields
Mvt Grp Issues i.e Movement Type group for Issue.The movement types relevant for issue of materials are grouped for a combination of transaction type and subtransaction type.Which is 0001 in standard SAP
Mvt Grp Receipt Movement Type Group Receipts.Receipt of materials are grouped for a combination of transaction type and subtransaction type.Which is 0002 in standard SAP
Step 2
And in next step we define the movement types to its group
Logistics General -->Tax on Goods Movement --> India -->Business Transactions --> Subcontracting --> Maintain Movement Type Groups
Now just think Logically forget CIN
Which are your receipt movement types ?
101,542 etc so assign these to Mvt type Grp 0002
Which are your issue movement types ?
122 ,102,541 etc so assign these to Mvt type Grp 0001
Now detailed explanation from SAP just find the document
"J85 u2013 Subcontracting without Payment of Excise Duty :Building Block Configuration Guide"
Link : http://help.sap.com/bp_bblibrary/600/Documentation/J85_BB_ConfigGuide_EN_IN.doc
Also check http://help.sap.com/bp_bblibrary/600/html/J85_EN_IN.htm for process details

Masks moving when I move the group?

Hello all
Hope you can help.
I have 4 masks applied to 4 copies of a green screen footage, all in 1 group.
Now when I move the group all the bits of footage move different amounts and do not line up.
Is there a way I can keep them in relation to each other?
Thanks in advance
Lee

Could it be that you have a 3D group? Make it 2D and you shouldn't have this problem...
Patrick

Move to Group disappeared

Greetings,
I was successfully grouping my tabs into new group from a large number tabs to many group created,
then a crash happened after visiting a website requires Flash Player and Java plugin,
Windows 7 error reported for plugin container and Firefox errors and the Firefox submittal automatically
required the quit or restart the Firefox, after choosing restart the tabs on the new group are still exist
but the move to group using right click on tab was disappeared,
I would like to report this issue for future solution,
Best Regards
MOHAMAD GHOUL

Hello guigs2
Thank you for your reply, your above solution is good for moving tabs from group to other group,
My Firefox usage is for multiple categorized tab groups,
I was using all the tabs on one group but doing a categorize groups ease the reference,
Firefox feature address bar is useful for search and look up tabs also,
when using Firefox with more than 100 tabs there must be many categories of website tabs groups.
The above issue suddenly happened when moving tabs and using Java and Flash plugins at the same time,
Your reply was helpful enough,
Thanking your cooperation,
I'm proud to use Firefox browser and proud to use this community also for future updates and stay tuned to mozilla support center,
Best Regards
MOHAMAD GHOUL

Making a movie clip play beyond keyframe

Hi,
I have a movie clip that is about 30 frames long. I've placed an instance of it on the main timeline and it follows a motion path. My motion path ends after about 20 frames. At this time, I've inserted a keyframe which is preventing my movie clip from playing the remaining 10 frames.
I tried adding an ActionScript layer where the last keyframe is and it reads:
instance.gotoAndPlay (20)
Doesn't seem to work. Just a note that this is around frame 292 of the main timeline. Also note, a new keyframe begins on another layer with a different movie clip.
Any ideas? Much appreciated.

I think I may understand now, and your first approach to solving it should work. What you need to be sure to do is to assign the instance name at every keyframe. If you did not name it in its first frame of the main timeline, it will inherit that lack of a name in the keyframe at the end of the tween, regardless of your assigning it there... just a quirk of Flash.
Another option, if this is a straight line tween of the object on the main timeline is to use actionscript to animate it rather than a timeline tween.

Help! camera movements changing b/w keyframes

Please help! I'm making a kinetic type video and the camera movements change in between the keyframes I set up. For example; if I want the camera to just shift to the right, I copy the frame position, and then change the X axis. When I switch between the two frames everything is right, except the frames that AE makes up in between is also changing the Y axis... but the Y is the same on each keyframe. I've tried looking everywhere for help, everywhere in the program, tried re-doing it mutiple times, restarting AE, ect and I cant figure it out... Please help!

You have a "boomrang" effect, and this can be corrected easily. Select your keyframes, right click and go to "Keyframe Interpolation" and select "linear".
In the preferences menu (edit > preferences > general) you can check the preference "default interpretation to linear" wich is unchecked by default.
Also, one of the neat new feature of AE CS4 is the ability to separate dimensions. It's really time saving when animating cameras or complicated x,y,z mouvement. For that, select your position property, right clic and select "separate dimension". Now you will be able to animate the x,y,z property independantly.

Move collapsed group in tree control expands it

In LV 2010, I have a tree control. If I collapse a group and move it to a new location in the tree, it is expanded when I drop it in its new location. Is this a configurable option? A bug?

Attached is a VI that shows what I'm talking about. You collapse the group, drag and drop it to a new place in the tree, and it is automatically expanded.
I believe I have the settings you specified.
Attachments:
tree control example.vi ‏6 KB

Move a group of keyframes?

Similar Messages

Maybe you are looking for