Move a single file in a Collection to another Collection

I mistakenly created a collection when only one file was highlighted. I made another collection with all the other files I wanted in it, but I can't drag that one file from the filmstrip...
There must be another way!

Suzanne,
You are exactly right!!
I tried to edit my last response when i discovered this, but I was too late. The image already was in the collection.
Thank you both for your help.
Paul

Similar Messages

How can I move a Pages file from a folder to another one?

I Have done the upgrade to mac os Yosemite but now i'm Not able to move a file from a folder to another one Inside iCloud
now it's impossible to organize MY archive

Thankyou Winston, you guess right. What i don't understand is why with the older version of mac os (10.9) i can organize my document into icloud folders using the Pages app window. But now with the new version i'm no longer able to do that. Using ipad in the same window there is no problem, but in mac os it doesn't work.

How do I move my OS files from one drive to another on a Mac Mini server

My main drive on my Mac mini is dying so I need to move all my files, including the OS, to the other drive. Do I just copy all the files over then delete the old ones and reboot?

The disk that was the "Lower" is the one you cloned to. When you clone, the name of source disk is copied with the contents to the target disk.
The lower HD is the one closest to the bottom of the Mini.
http://www.ifixit.com/Guide/Installing+Mac+Mini+Late+2012+Dual+Hard+Drive+Kit/11 713Thus if you cloned the bad drive, the bad drive is in the lower location.
This says how to replae the lower drive.
Are both drives identicatal drives (except for SN)? If not maybe y could comfirm by that.
Also, how was it failing? The If it SMART errors you can tell in there are any SMART errors idenfied for that disk in Disk Utilty.
Further, if you go to Disk Utility and click on the HD itself, not Server HD, that will say upper or lower in bottom left

How to access a single file folder in timemachine using another computer as my own was stolen?

Help!
My Macbook Pro was stolen!
I made backups with timemachine. But now there is no other Mac in the area to access this, and a windows computer does not read it. I am also nowhere near an Apple store.
Possibly next week, via a colleague, I will have access to another Macbook. How do I find and restore then the single file folder in the timemachine backup. which has all work related documents, onto the desktop of this other computer, so that I can then transfer it via USB stick to a windows operated desktop computer?
Thanks for any tips!

No, there's no good way to do this. You *could* (if you can run an .exe file off the flash drive) try the Flash Projector, if you can run the SWF as a standalone application.
Adobe Flash Player - Downloads

Move a image file from one drive to another drive in Presentaion Server

Hi,
My business requirement is to move a image file which is in C:\ drive to another Drive ( Common Drive ).
So I need to that through programming.
Kindly help me in this regard.
Thanks
Arbind

Hi Arbind,
<li>The logic is here.
<li>Change the folder names and execute the program accordingly.
REPORT ztest_program.
DATA: wa_pfile TYPE file_table.
DATA: it_pfiles TYPE STANDARD TABLE OF file_table.
DATA: count TYPE i,
 dir TYPE string VALUE 'C:\Venkat1\',
 source TYPE string,
 dest TYPE string.
START-OF-SELECTION.
 CALL METHOD cl_gui_frontend_services=>directory_list_files
 EXPORTING
 directory = dir
 files_only = 'X'
 CHANGING
 file_table = it_pfiles
 count = count
 EXCEPTIONS
 cntl_error = 1
 directory_list_files_failed = 2
 wrong_parameter = 3
 error_no_gui = 4
 not_supported_by_gui = 5
 OTHERS = 6.
 LOOP AT it_pfiles INTO wa_pfile.
 IF wa_pfile-filename CP '*.JPEG' OR
 wa_pfile-filename CP '*.BMP' OR
 wa_pfile-filename CP '*.JPG'.
 CONCATENATE 'C:\Venkat1\' wa_pfile-filename INTO source.
 CONCATENATE 'C:\Venkat2\' wa_pfile-filename INTO dest.
 CALL METHOD cl_gui_frontend_services=>file_copy
 EXPORTING
 SOURCE = SOURCE
 destination = dest
 overwrite = 'X'.
 ENDIF.
 ENDLOOP.
Thanks
Venkat.O

How ot move an flat file from one location to another

Hi all,
My requirement is that i am having a flat file in my C drive(ex:- C:\123.txt) i have to move that file into One of the folders of the My Netqork places using ABAP Programing
How can i do this...Can we do this using OPEN DATASET Plese give me sample code if having
Regards
Ajay

Hi Ajay,
There is no need for using Open Dataset.
First you upload your text file using GUI_UPLOAD from the present location.
Then you download the file using GUI_DOWNLOAD into the required location(Netwrk Places).
Check this link for GUI_UPLOAD and GUI_DOWNLOAD.
http://abaplovers.blogspot.com/2008/03/function-modules-guiupload-guidownload.html
If you are moving it onto Application Server, then go for
Open Dataset
Check this link for Open Dataset:
http://help.sap.com/saphelp_40b/helpdata/ru/34/55cad198482bc0e10000009b38f91f/content.htm
Hope this helps you.
Regards,
Chandra Sekhar

Copying a single file from one project to another????

Hello,
New to Mac from a PC, tried search with no results. I have a single image I would like to display in 2 separate projects in Aperture. (As I will be writing to a disc and print later). How do I copy the image from Project A to Project B, making is available to both??? Thanks in advance!

There are two different ways to do this.
The first way is literally exactly what you are asking for but may not be what you really want. You can copy the image (and corresponding master) by holding down the option key while dragging the image from one project to the other - make sure the drop target is the actual little yellow project box and not something inside the project box. When you do this there will be two completely separate copies that have nothing to do with each other. If you make an adjustment to one the other will not change, if you delete one master the other will still be there.
The second way may be what you actually want - if you create any type of album within or even outside of a project you can drag any images from any project into it - no copies are made but the image will "show up" in that album no matter what project it happens to live in. This is usually a better way to group images together from multiple projects no matter what the purpose.
Here are some more details:
[Aperture organization|http://photo.rwboyer.com/2008/07/apple-aperture-21-organization>
RB

Can someone tell me how to move an iweb file from one mac to another?

I was told by a mac genius a year ago but I can't remember how it was done.

On one computer, choose Go to Folder from the Finder's Go menu, provide ~/Library/Application Support/iWeb/ as the path, and move the Domain item inside to the corresponding location on the other computer.
(56486)

Add single computer to multiple collections listed in a file

Good afternoon,
I am trying to figure out how to add a single computer to multiple collections based on the contents of a file. Basically, I have a frontend hta for deployments. On that hta are checkboxes for various bits of software that should be installed, for example
MS Office. When the hta is submitted, if a software checkbox is checked it writes to a text file on the server indicating it was checked. Once the deployment is completed a script is run via a status filter rule. The intent is for that script to read the file
on the server and add the computer that was just imaged to the collections identified by the checked boxes.
Obviously I am not having much luck which is why I am here looking for a bit of help.
Here is the code that I am working with..both the while and foreach version
$file = New-Object System.IO.StreamReader -Arg $path
while ($line = $file.ReadLine()) {
Add-CMDeviceCollectionDirectMembershipRule -CollectionName $line -Resourceid $ClientName
$file.close()
foreach ($line in (Get-Content $path)) {
Add-CMDeviceCollectionDirectMembershipRule -CollectionName $line -Resourceid $ClientName
I have found that if I manually assign a value to $line everything works as expected, but if I try to read from the file and use either a while or foreach loop it fails.
I can enter a quick write-host and see that the value of each line is being returned as I would expect it but the system just returns the following error for each one:
Add-CMDeviceCollectionDirectMembershipRule : No object corresponds to the specified parameters.
I am sure that there are better ways to do this and I am sure there are cleaner ways to code it, but I am not a Powershell guru so please be kind. ;)

"-Resourceid $ClientName" is not correct because ResourceID != Clientname. See
http://technet.microsoft.com/en-us/library/jj850102(v=sc.20).aspx There is no parameter that accepts the name of the client.
Torsten Meringer | http://www.mssccmfaq.de
Thank you for the suggestion, but that is not the issue. As mentioned in the first post, if I manually assign the collection variable value it works without issue. This is to include *without* changing the $Clientname.
Previously in the script, which was not shown is the following:
$Clientname = (Get-CMDevice -Name $Clientname).ResourceID
If I do a Write-Host $Clientname after that line of code I am returned the correct numeric value. That said, part of my troubleshooting *before* I posted here was to hardcode the numeric resource ID of the client which did not change anything unless the
value of the collection variable was manually set or the variable replaced with the collection name.
So, any ideas as to why it is not able to read and process collection names from a text file?

How do you delete [empty] a single file or folder from "Trash"?

How do you delete [empty] a single file or folder from "Trash"?
Can you "securely delete" just 1 item?

A dangerous and incorrect shell command has been posted in this thread.
NEVER empty the Trash in the shell (Terminal.) NEVER put anything in the Trash unless you intend to delete it immediately. If you do put something in the Trash and change your mind about deleting it, move it out or use the Put Back contextual menu item. Then empty the remaining items in the Trash as usual.

Can I move files from one caralog to another?

Can I move files from one caralog to another?

No. you cannot.
This, among many other reasons, is why multiple catalogs are not recommended.
(You could import the photo into another catalog, and delete from the first catalog ... and without first using the command File->Write Tags, you will lose your tags, captions and other metdata; version sets, stacks, album/collection membership are lost in any case)

Move file from one library to another library via SharePoint 2010 Designer Workflow

Can SharePoint 2010 designer be able to move a file from one library to another using workflow? I tried to use the copy list item but it won't show my destination library. I prefer not to use the 3rd part workflow like
http://www.codeplex.com/SPDActivities
Please advise.
Brian
Brian

Hi Brain,
From your narration, I undersatnd that you want to move document to another library across site or site collection. However,
the copy list item action is used for coping list item to another library or list in the same site, so you can’t achieve it through ootb workflow action. So to move document to another library across site under the same site collection, then you can use site
content and structure. If across site collection, then I suggest you use that the 3rd part workflow action.
For more information about site content and structure,
http://office.microsoft.com/en-us/sharepoint-server-help/work-with-site-content-and-structure-HA010131723.aspx
Best Regards.
Kelly Chen
TechNet Community Support

How can I move a pdf file from my pc to my ipad without overwriting all the pdf files in my ipad?

How can I move a single pdf file from my pc to my ipad without overwriting all the pdf files already in my ipad?

Email PDF to iPad.

Not able to update single file in a non ejb Module related jar

Hey all,
I have depoyed my j2ee application .ear on NW webAS .
 This application apart from having all the ejb Modules related jar, also has a jar which has all my properties files being accessed by my application.
Very often is it required by me to update these files and restart the application. However i couldnot find a way to update these single files.
When i select by deployed application.ear and click Single File Update feature provided by SAP in visual Admin, it shown only ejb modulerelated jar. It dosent show my jar containing properties file.
I have to redeploy my application again everytime i change a small properties file.
Please let me if there is a way to update these sngle files

Hi,
>
Vikram D Salvi wrote:
> MOVE-CORRESPONDING ZSTRUC_CM TO I_TAB. not working
>
> UPDATE ZTEST_CM FROM ZSTRUC_CM. not working
Instead of the move statement you need to use the append work area to internal table statement. you need to have the same structure for the work area and the internal tbale.
Then use the modify data base table from internal table statement.
Regards
Ansari

File adapter should pick a single file at a time

Hi,
I have File to RFC scenario.. in my source directory I'm getting bunch of files with the same name. at a time.. but i want to pick the one by one only. that means.. my file adapater poll interval is 30 seconds.. every 30 seconds it will pick the one file.. even though there are multiple files.. but my file adapter should pick a single file ata time..
but at present my file adapater was picking all the files ata time.. but i want to make my file adapter should pick single file ata time..
for this.. any special configuration we need to do.. or any ideas or suggestion .. will be.. appriciated..
regards
Babu

>>any special configuration we need to do..
there is no default configuration to achieve this functionality.
I speculate that any of this should work.
1. Post the files to a intermediate directory and use a SCRIPT/Batch program to move only one file at a time frame to the source directory.
2. Uncheck the option Process Read only files in the sender CC to prevent the file adapter to pick the read only files. Use a script that changes the permission of one file at a time so that the file adapter will pick that file alone.
In both the cases the script needs to be scheduled at the OS level to run every 30 seconds.
Thanks
SaNv....

Move a single file in a Collection to another Collection

Similar Messages

Maybe you are looking for