Move-adobject errors(cross-domain move)

Without specifying server
Move-ADObject : The operation could not be performed because the object's parent is either uninstantiated or deleted
with server targetserver and attempted with every dc.
Move-ADObject : The requested operation could not be performed because the directory service is not the master for that
type of operation
anyone know what's going on here?
Dan

Hi, yes I'm confused as well. I ran it from the RID master (just to check) and the cmdlet isn't even recognized. Move-Item and Move-ItemProperty are the only two cmdlets available to me. Running it locally as an administrator give the error
that the object's parent is either uninstantiated or deleted (which brought me to this page). The link of 'movetree' won't work since we're not a 'native' mode domain so it looks like ADMT will be my saving grace. I'd really like to use the
Move-ADObject since it is a smaller, simpler script less likely for error but I'm just not hitting the correct combination of variables.
Thanks,
Stan
Stanley E. Noel Jr

Similar Messages

Saml authentication error-cross domains

Hi,
I am trying to setup the SAML 1.1 authentication with OWSM Policy for my SOA composite. The Web Service contains a simple hello operation which is called by an external client also BPEL service. The SOA service is just an SAML assertion consumer. I have already configured the OWSM through the Enterprise Manager and the policy for the Proxy Service:
1. Security/Security Provider Configuration/ Web Services Manager Authentication Providers section - I configured a custom keystore with private key and required trusted certificates. The saml.loginmodule is configured with sufficient control flag, valid issuer vaue and to allow virtual users (property oracle.security.jps.assert.saml.identity=true)
2. Custom OWSM policy was created. It is based on the built-in wss11_saml_token_with_message_protection_service_policy.
3. Web Services/Platform Policy COnfiguration/Trusted STS Servers and Trusted SAML Clients configuration contains the Issuer of my SAML Issuer.
Now I am calling the hello service with an external client. The request meets the security policy. It contains a valid, signed SAML assertion (with sender-vouches subject confirmation method), a valid timestamp is attached in the security header and the body is encrypted with the required method. On the server, I am getting the following exception during the SAML assertion validation:
Unable to invoke endpoint URI "http://172.17.30.192:8001/soa-infra/services/default/SAMLSCAApplication!1.0*soa_a95b5561-3c2e-4339-a301-ec79172914ad/bpelprocess1_client_ep" successfully due to: oracle.fabric.common.PolicyEnforcementException: access denied (oracle.security.jps.service.credstore.CredentialAccessPermission context=SYSTEM,mapName=oracle.wsm.security,keyName=keystore-csf-key read)
Can you please help me?
Regards,
Bharat

Hi,
I am trying to setup the SAML 1.1 authentication with OWSM Policy for my SOA composite. The Web Service contains a simple hello operation which is called by an external client also BPEL service. The SOA service is just an SAML assertion consumer. I have already configured the OWSM through the Enterprise Manager and the policy for the Proxy Service:
1. Security/Security Provider Configuration/ Web Services Manager Authentication Providers section - I configured a custom keystore with private key and required trusted certificates. The saml.loginmodule is configured with sufficient control flag, valid issuer vaue and to allow virtual users (property oracle.security.jps.assert.saml.identity=true)
2. Custom OWSM policy was created. It is based on the built-in wss11_saml_token_with_message_protection_service_policy.
3. Web Services/Platform Policy COnfiguration/Trusted STS Servers and Trusted SAML Clients configuration contains the Issuer of my SAML Issuer.
Now I am calling the hello service with an external client. The request meets the security policy. It contains a valid, signed SAML assertion (with sender-vouches subject confirmation method), a valid timestamp is attached in the security header and the body is encrypted with the required method. On the server, I am getting the following exception during the SAML assertion validation:
Unable to invoke endpoint URI "http://172.17.30.192:8001/soa-infra/services/default/SAMLSCAApplication!1.0*soa_a95b5561-3c2e-4339-a301-ec79172914ad/bpelprocess1_client_ep" successfully due to: oracle.fabric.common.PolicyEnforcementException: access denied (oracle.security.jps.service.credstore.CredentialAccessPermission context=SYSTEM,mapName=oracle.wsm.security,keyName=keystore-csf-key read)
Can you please help me?
Regards,
Bharat

Error 2170 in Cross Domain Policy deployed in Enterprise Portal

Hi All,
We are facing an Error # 2170 for the Cross Domain Policy in Enterprise Portal.
We developed the dashboard using 2 web service connections (using ECC Remote Enabled Functon Module). The Web services were made Public so that they can be accessed from any network. We developed the dashboard using the public enabled webservices and exported to the SWF file which is working fine.
But when we place the dashboard SWF file in the Enterprise portal it gives the error " Cross Domain Policy Error #2170" .
We Placed the Cross domain Policy file in ECC Server in the root directory and placed the same in Enterprise portal C drive.
But still it shows the same error when we preview the dashboard in Enterprise Portal.
The Cross Domain Policy File that we are using is as follows:
-<cross-domain-policy> <site-control permitted-cross-domain-policies="all"/>
            <allow-access-from secure="false" to-ports="" domain=""/>
           <allow-http-request-headers-from secure="false" domain="" headers=""/>
           <allow-https-request-headers-from secure="false" domain="" headers=""/>
</cross-domain-policy>
Please let us know if the cross doamin file is correctly coded and suggest us with suitable solutions for this problem. Also let us know if there is some alternative solution to this issue.
Thanks,
Malla Reddy D

Hello Malla,
Maybe SAP Note 1240810 helps... Anyway, I would say that if your issue is with the direct SAP NW BI connection, through BICS, the only file which is relevant is bicsremotecrossdomain.xml, which should be located on your server HTTP root.
Another check you can perform is if you have both portal certificate entries as per SAP Note 1508663.
Kind Regards,
Marcio

Safari cross domain error

I tired to access a web site via Safari that I previously was able to access; however, now I get the following message: "Cross Domain Error: Cross domain is not supported by this browser." Is there a plug-in or something else that would allow me access the site?

Hi,
Please try to configure the cross domain policy file to allow public read access (that is, access it without federation requirement), make sure you can access the address
http://something/clientaccesspiolicy.xml directly in a browser
without redirecting to check whether the cross domain policy file could be anonymous accessed (Please start a new browser session and make sure you're
not logged in. Then test the cross domain policy file.).
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cross-domain Navigation Error

Hi folks,
I was just beginning to test out a site on my domain when I received the following error:
Cross-domain Navigation Error
Adobe InContext Editing does not support cross-domain navigation.
For more details, please visit the Adobe InContext Editing Help and Support page.
While I could not find any help easily, I thought I would post here with what I have discovered. I am not entirely sure what "cross-domain navigation" is in the first place, but I had a few hunches.
Initially, I was using a site set up with templates and library items. Then, for the purposes of troubleshooting, I deleted all files and placed one HTML file in the folder with nothing but some text in it. I still received the error message.
On a whim, I decided to try InContext Editing in Internet Explorer instead of Firefox, and it worked. I then downloaded and installed the latest version of Firefox (3.5.1), and the error message still appeared.
Any ideas?
Thanks in advance!

Having the same troubles. Worse it goes into an endless loop where you can't get out of the error message cycle.
http://sonomamountainbusinesscluster.com/

Cross Domain Trust Error, while opening the infopath in sharepoint list.

Dear All,
Facing some issue in
Environement:
Windows = Windows Server 2008
Shareppoint = Sharepoint Server 2013.
Project Server = Project Server 2013
Info Path = Info Path Designer 2013
Detailed:
I have sharepoint environment with Project Server,I which have created task list in my project site and then i customize that form using info path their is one column named: "Product Name" in my task list which is drop down menu in that menu
i want to show all the project name which are created in PWA Site. For that i made the External data connection to my sql server and select my desired table from that and also configured the my column data "i:e; Product Name. And published it to the my
site. Now when i opened that form it prompts the error
"The form cannot be submitted because this action would violate cross-domain restrictions.
If this form template is published to a SharePoint document library, cross-domain access for user form templates must be enabled
under InfoPath Forms Services in SharePoint Central Administration, and the data connection settings must be stored in a UDC file in a data connection library in the same site collection.
If this is an administrator-approved form template, the security level of the form must be set to full trust, or the data connection
settings must be stored in a UDC file by using the Manage data connection files option under InfoPath Forms Services in SharePoint Central Administration ."
Oopsss !!
Now start googling it found couple of solution shared listed below:
1. Enable the cross domain authenticated in Central Admin –> General Application Settings –> Configure InfoPath Form Services (Done)
2. Now Created the data connection library in my site collection which is PWA Site after that i went to the infopath and creating the data connection and
Convert to Connection File and enter the URL of the data connection library
and its prompt the error " the specified url is not a data connection library and enter the correct filename" didnt remember the exact error description at the moment.
So, that was all stuff, Kindly suggest me any step which i missed that or ay solution that resolve my this issue.
Thanks
REGARDS DANISH DANIE

it seems the data-seed failed in your dehydration store.
so i would check if user orabple exsits in your db (pw is orabpel) .. and recreate the schema by executing the following script (based on your db)
orabpel\system\database\scripts\domain_oracle.ddl
hth clemens

Cross domain error while displaying .SWF files in portal

Hi Experts,
i am working on EP ,
i am trying to display a .swf file in a iview but that file is giving an error as
Add a cross domain policy file to the external data web server
this swf file is retriving data from BI system.
Please suggest !!
i got a solution of putting a crossdoaim.xml file in root directory but thats not possible

I think two urls will work for you:
Xcelsius SWF with QaaWS through SSL: Cannot access external data
http://livedocs.adobe.com/flex/3/html/help.html?content=security2_04.html

Cross Domain error for Silverlight + MVC application with self hosted WCF service on azure

Hi,
We are migrating existing Silverlight application to MVC; existing Silverlight application is hosted on
Azure which is consuming self-hosted WCF service. For authentication we have implemented
ADFS with WIF (passive). The cloud service (<myWebSite>.cloudapp.net) is C Name to (<myWebSite>.<myDomain>.com) and we
are consuming WCF service at <myWebSite>.cloudapp.net/<myService>.svc, as we were getting “Cross Domain” error so we have added “clientaccesspolicy.xml” at the root of “WEB ROLE”.
Existing Silverlight application works fine but the problem occurred when we deploy our migrated application to the same cloud service. We are getting a “Cross Domain” error.
The same migrated application works fine on UAT environment, the only difference is UAT environment is
without ADFS WIF implementation.
Migrated application is half Silverlight and half MVC with initial landing page is Silverlight. MVC web role is used to host the service i.e. .SVC . To go to SL landing page , redirected from home controller. Following is being observed in fiddler for this
application
Existing Silverlight application -
After authentication with ADFS it redirect to Silverlight landing page.
Before calling service method it looks for “clientaccesspolicy.xml”
In response header we are getting the content of “clientaccesspolicy.xml”
And after this everything works fine
Migrated Silverlight-MVC application –
After authentication with ADFS it redirects to “HomeController” and from there we are redirecting to Silverlight landing page.
Before calling service method it looks for “clientaccesspolicy.xml”
In response header we are getting following content - “https://federation-sts.<myDomain>.com/adfs/ls/?wa=wsignin1.0&
wtrealm=https%3a%2f%2f<myWebSite>.<myDomain>.com&
wctx=rm%3d0%26id%3dpassive%26ru%3d%252fclientaccesspolicy.xml&wct=2014-03-17T10%3a36%3a04Z”
4.Throw “Cross Domain” error.
Also we have added filter in
RouteConfig
for .xml file
routes.IgnoreRoute("{*allxml}",
new { allxml = @".*\.xml(/.*)?" });
NOTE: There is no configuration change apart from MVC configuration.
We have done RDP to web role and found that “clientaccesspiolicy.xml” is present at “E:\approot” location and it is also accessible at “https://<myWebSite>.<myDomain>.com/clientaccesspolicy.xml”.
Please help
Thanks,
Rahul P

Hi,
Please try to configure the cross domain policy file to allow public read access (that is, access it without federation requirement), make sure you can access the address
http://something/clientaccesspiolicy.xml directly in a browser
without redirecting to check whether the cross domain policy file could be anonymous accessed (Please start a new browser session and make sure you're
not logged in. Then test the cross domain policy file.).
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cross Domain Data Source Error in SSRS 2008

We have our data warehouse server on a different Windows domain (Domain ABC) to the domain where our end user tools such as SSRS and SSAS sit (DOMAIN 123). Historically we've used SQL server mixed mode authentication to get around any cross domain
authentication issues but to tighten up security we are trying to switch to Windows only. However, I'm unable to my development instance of SSRS to connect to a datasource using credentials from a different domain.
I created a copy of the live data source with the same settings except for the credentials. Here I selected Windows credentials (without impersonation ticked) and put in the username with the format DOMAINABC\DomainAccount with a domain account from
the same domain as our DWH server. However, none of the reports I tested can conect and throw the error below. Please can anyone give me some pointers on things to check? My google research has drawn a blank so far!
An error occurred during client rendering.
An error has occurred during report processing.
Cannot impersonate user for data source 'DWH'.
Log on failed.
Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)

From your inital post, it sounded like you wanted to login to the data source with a remote domain user (123 in your example). Glad to see that's not the case!
When you tested the credentials with SSMS were you on the remote domain?
It looks to me like the impersonation is implicit: https://msdn.microsoft.com/en-us/library/ms160330.aspx
Theres a couple of notes at the top of that page about remote access being enabled, and the ports that should be open too.
Theres a bunch of potentially useful information about what your connection string should look like here too:
https://msdn.microsoft.com/en-us/library/ms156450.aspx

I am calling an xml , that come from rtmp server and i want to play a video . when i pause it show an error of cross domain. what i can i do?

I am calling an xml , that come from rtmp server and i want to play a video . when i pause it show an error of cross domain. what i can i do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

Cross domain scripting: error #2048

Hi,
This is my first entry in this forum but I already found a lot of answers by browsing it. However, altough many references seem to solve the problem I'm hurting on, it doesn't seem to work for me...
Now, here's the case:
I made a flash web site that will be hosted on an external web server (let's call it server «www.external.com»).
My flash needs to get some info from my internal server (let's call it «www.internal.com»).
On «www.internal.com», I don't have access to the root, only to the folder «myfolder» so my website reads like this: «www.internal.com/myfolder».
Being aware of some sandbox security issues, I made a crossdomain.xml file and uploaded it to «www.internal.com/myfolder/crossdomain.xml» to provide acces to «www.internal.com/myfolder» from «www.external.com» wich is the following:
<?xml version="1.0"?>
<cross-domain-policy>
<allow-access-from domain="www.external.com" />
<allow-http-request-headers-from domain="www.external.com" headers="*"/>
</cross-domain-policy>
In my flash, there is the code i use to retrieve my info:
Security.loadPolicyFile("http://www.internal.com/myfolder/crossdomain.xml");
var myData:URLRequest = new URLRequest("http://www.internal.com/myfolder/myapp/datarequest.cfm");
var loader:URLLoader = new URLLoader();
loader.load(myData);
That's where I get the raging error #2048 in an error #2044 telling me this (excuse the french, my player and I use this language):
Error #2044: securityError non pris en charge : text=Error #2048: Violation de la sécurité Sandbox : http://www.external.com/flashapp.swf ne peut pas charger de données à partir de http://www.internal.com/myfolder/myapp/datarequest.cfm.
According to what I saw and read, loading a policy file should allow me to access info. Once I read that the crossdomain.xml file absolutely had to be on the root of the web server, unfortunately, I don't have access to the root.
There surely is something wrong with what I am doing, anyone has a thought?
Thanks in advance and sorry for the long message...

just a guess here - it looks mainly as though you are on the right track, and you are correct if you so not have access to the root, then you must target the crossdomain.xml location as you have specified.
the one thing i don't see that you have listed here is a call to:
Security.allowDomain("www.external.com");
which *might* be the issue

Facebook keeps giving me a cross domain reciver page error on most issues, why is this?

cross domain page receiver error message on facebook?
== URL of affected sites ==
http://http://facebook.mafiawars.com/mwfb/xd_receiver.htm

Thanks for the flag J.K. - they contaced me and solved my problem. On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!

Cross Domain Connection Issues with Test Controller

I am having trouble resolving a problem I have connecting a build agent with the test controller in a cross domain environment. I have purged out the actual machine names, domain names, and IP addresses just in case that is a security concern.
Situation is this:
All machines are running Visual Studio 2013
Test controller/agents are on Windows Server 2012 R2
Test controller is installed as stand-alone in order to be able to do load testing, as well as API and CodedUI.
Build definition in TFS kicks off the automation using testsettings file to point to build controller
Application under test uses resources in the ABC.XYZ domain. Test agents need to be in ABC.XYZ in order to test application E2E.
TFS is in Main.corp.company.com domain.
Test controller is a dual-homed box in corp.company.com and ABC.XYZ domains. It are accessible from Main using the corp.company.com NIC.
All our dual homed boxes are set up this way. Dual homed with Main and ABC directly is considered a security violation.
From the dual homed box, logged in with my ABC credentials, I can access TFS in Main using my Main credentials.
Manually, I can successfully kick off a test run from a command line from a VM in ABC.
Build controller and build agents are in Main.corp.company.com.
Build controller can successfully connect to build agent, and build agent successfully builds the automation.
Build agent fails to connect to build controller:
Failed to queue test run 'buildagent@MachineOne 2014-08-12 12:35:34_Any CPU_Debug': No such host is known
I can ping the build controller from the test agent, and I can successfully query port 6901:
Querying target system called:
testcontroller.corp.company.com
Attempting to resolve name to IP address...
Name resolved to 10.10.10.111
TCP port 6901 (unknown service): LISTENING
Firewall is turned off on the test controller. Even if it wasn’t, the relevant rules allowing port 6901 and File and Printer Sharing are created.
Local Security Policy | Security Options | Network access: Sharing & security model = classic
NETBIOS names of the test agents and build agent are set in the test controller’s hosts file (they were pingable without this anyway)
NETBIOS name of the test controller is set in the test agent’s hosts file (it was pingable without this anyway)
Tried both simple NETBIOS name and FSDN for test controller in testsettings file
Considering installing a build agent on the same machine as the test controller, but suspect that would just move my communication problem to build controller : build agent
Considering moving test controller to Main and making the four test agents dual-homed, but there is a concern to limit the number of dual-homed boxes, and also suspect that would again just move the communication problem.
I can use netstat to verify that the service is listening to port 6901 on both NICs:
TCP 0.0.0.0:6901 0.0.0.0:0 LISTENING 6536
TCP [::]:6901 [::]:0 LISTENING
6536
(PID 6536 is the QTController.exe)
However the VSTTController.log only mentions listening to the ABC NIC. Since the connection to the ABC test agents works, that makes sense.
When I open the testsettings file on my laptop in the Main domain and examine the server name, there is a warning that the host cannot be found. When I open it on a VM in the ABC domain I am able to manage the test controller and view all the test
agents. However, if I try to restart the build controller I get an access denied error. Not sure if that is related in some way.
I am using a ABC domain service account to run the test agent sevice. There is a Main domain service account running the build. Both service accounts are administrators on the test controller and in the TeatTestControllerAdmins and TeatTestControllerUsers
groups. The test agent service account is also in the TeamTestAgentService group.
I tried to create a port proxy to forward requests from the Main facing NIC to the port on the ABC facing NIC:
netsh interface portproxy add v4tov4 listenport=6901 listenaddress=10.10.10.111 connectport=6901 connectaddress=10.20.20.222
This almost worked. I could see with netstat commands that the port was opened and a connection was established with the build agent, however after a long wait it hit an error that it couldn’t find the ABC NIC:
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 10.20.20.222:6901
So apparently the ABC IP is getting forwarded back to the test agent, which then of course can’t use it.
I am running out of ideas to try. Not sure where the problem is:
Cross-domain issue between Main.corp.company.com and corp.company.com? Or,
Problem with the test controller not being able to listen on more than one NIC?
I know I am not the first person to try to set up something cross domain. Most of the troubleshooting suggestions I have been able to bing have been about fixing connections between test controller and test agents, which isn’t the problem here.
Is this set up just so far from standard that VS can’t handle it?
Thanks in advance,
Gary

Hi Gary,
Thank you for posting in the MSDN forum.
>> Build agent fails to connect to build controller: Failed to queue test run 'buildagent@MachineOne 2014-08-12 12:35:34_Any CPU_Debug': No such host is known
>> I know I am not the first person to try to set up something cross domain. Most of the troubleshooting suggestions I have been able to bing have been about fixing connections between test controller and test
agents, which isn’t the problem here.
Just to make this issue clearly, you mean that it is not the Test Controller and Test Agent issue, am I right?
As you said that it is related to the Build controller and build Agent, am I right?
If it is related to the Build Controller and Build Agent, I suggest you post this issue to the TFS forum, there you would get dedicated support.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=vstfs&filter=alltypes&sort=lastpostdesc
If there's any concern, please feel free to let me know.
Sincerely,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Cross Domain XML not working

Greetings,
I recently obtained two different domains that point to a subdirectory of another domain server. The swf file I created does not show up when I use the domains that are pointing to the subdirectory of the original domain.
I placed an xml file into the root directory that contains the following code:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*.newdomainname1.com"/>
<allow-access-from domain="*.newdomainame2.com"/>
</cross-domain-policy>
Nothing shows up. Is there something else I need to do make this work? I created the swf file using CS3 - Action Script 2. I tried searching everywhere to see if I'm missing a step, but cannot find anything. Any help would be greatly appreciated.

I'm still not entirely clear what the problem is.
Those links to the other domain show 404 errors, which is related to how things are set up on your hosting server for those domains, and nothing to do with flash.
Are you trying to get the swf at http://www.searecovery.com/ to load data from the other domains? (I can't see it trying to do that, so perhaps not)
If so you need to add *.searecovery.com to the crossdomain files at the other domains.
Crossdomain files give flash content (swfs) hosted at one domain access to load data (or grant access to the data of loaded assets) from another domain.
So you need crossdomain permission if you want a swf hosted at www.danfoss-searecovery.com to load xml data from www.danfosssearecovery.com for example, or to get at the bitmapdata of jpgs loaded from www.danfosssearecovery.com.
If you just want to host the swf at the other domain, and if it's not loading data from external domains, then you pretty much just need to move copies of the html and swf there along with any external assets it loads (so long as you have used relative urls for loaded assets from within the swf) . If that's what you're trying to do then the issue here is likely to be simply how your hosting environment is set up for the other domains.

Cross Domain user security Authentication in Oracle Weblogic Server 10.3.3

Now i have configure the cross domain user configuration in the oracle weblogic 10.3.3 server. But i am not able to configure.
I have mentioned the below oracle document to configure the cross domain configuration.
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/secmanage/domain.html#domain_interop
http://download.oracle.com/docs/cd/E14571_01/web.1111/e13752/toc.htm#INTRO120
http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e13952/taskhelp/security/EnableTrustBetweenDomains.html
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/ConsoleHelp/taskhelp/security/ConfigureConnectionFiltering.html
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/security/con_filtr.html#wp1030656
Regards,
S.Vinoth Babu

sorry,wrong forum
move to Weblogic Server Section
Edited by: inchlin on Apr 1, 2009 9:39 AM

Move-adobject errors(cross-domain move)

Similar Messages

Maybe you are looking for