Move AP from WLC 4400 to 2500
I have wlc 4400 running on 6.0.196.0, get new wlc 2500 with 7.0.220.0, on 4400, 12 AP only one will register onto 2500.
Both 4400 and 2500 on the same subnet. how to let AP register on 2500 rather than 4400
AP model:
on 4400 now: AIR-AP1242AG-A-K9, AIR-LAP1242AG-A-K9, AIR-LAP1142N-A-K9
on 2500 is AIR-LAP1242AG-A-K9
on 4400
(Cisco Controller) >show interface summary
Interface Name Port Vlan Id IP Address Type Ap Mgr Guest
ap-manager 1 untagged 10.10.1.23 Static Yes No
management 1 untagged 10.10.1.22 Static No No
service-port N/A N/A 10.1.1.10 Static No No
virtual N/A N/A 1.1.1.1 Static No No
on 2500
(Cisco Controller) >show interface summary
Interface Name Port Vlan Id IP Address Type Ap Mgr Guest
m2 2 10 10.10.1.92 Dynamic Yes No
m3 3 10 10.10.1.93 Dynamic Yes No
m4 4 10 10.10.1.94 Dynamic Yes No
management 1 10 10.10.1.90 Static Yes No
virtual N/A N/A 1.1.1.1 Static No No
Similar Messages
-
Config migration from WLC 4400 to WLC 4400
Hi all
My customer has made a trade-in from a WLC 4400 to a WLC 5500. How do I migrate the existing config from the old to the new platform? Can I use the backed-up config of the WLC 4400 (I guess not due to the hardware-parameters which are different)? Or is there a conversion tool?
The WLC 4400 already runs a 6.x release.
Thanks
ToniThanks for your replies, guys. Just for you to let you know, my local Cisco channel systems engineer confirmed that there's no tool available and that you could try to copy&paste some parameters of the text config, yet there's no guarantee for success for that.
So the only recommended thing to do by now is to build the entire config on the WLC 5500 from scratch. -
Hi,
I am replacing an old 4400 series WLC running version 4.0.179.11 to a new 5508 WLC running version 7.2.110.0.
We currently have 70 x 1131 Access points on the 4400 WLC.
With this upgrade, do i need to upgrade the old 4400 to version 6.0 so the AP's get an up to date IOS or can i directly migrate all AP's over to the new 5508 without any version incompatabilities on the AP's?
I am abit worried that the AP's are running a very old IOS on the 4400 v.4.0.179.11 to go straight to the new 5508 v.7.2.110.0.
ThanksHi,
Check out this release note
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2_110_0.html#wp976667
You'll need to get up to a supported version of 6.0 first as per the release notes.
You'll need to check out the 6.0 release notes too to make sure there are no other intermediate upgrade steps required too.
Nigel
Sent from Cisco Technical Support iPad App -
Hi All
I want to migrate from WLC 4400 to WLC 5508. currently on WLC 4400 we got 10 AP are connected with 5 SSID having different authentication method. On WLC 5508 If I create the same SSID with same key, will I need to reconfigure anything on end user PC and smart devices
any tool to migrate wlc 4400 config to wlc 5508
cheers
VishalThanks Scott, some more inquiry
how to reboot the AP from the controller. ( I see 'Reset AP' - this option to reboot or something else)
how to disconnect all users connected to specific SSID from controller
Can AP model 3702 work with WLC 5508, do we need specific software version
cheers
Vishal -
One of my clients is keen to know the IDS/IPS capabilities with WLC 4400. Any hints? Also can anyone explain IDS sensor to me? Thank you.
There are a number of IDS capabilities that are highlighted regarding the WLC. Unfortunately, you will find that the product continues to suffer from ongoing false positives and a severe lack of documentation (and support) for the IDS.
For example, if you utilize containment against a rogue AP (which is used to prevent users from attaching to the rogue), the system detects its own containment messages as a denial of service attack. The system is not intelligent enough to know that it is the source of these messages and ignore them.
Initially, Cisco flagged these false positive as "cosmetic" and claimed that to fix them required a "feature request that must be run through the Cisco sales team" which we did in the spring of 07. Cisco has be VERY slow in coming around on getting these fixed (it has been well over a year since these have been documented and they are still not resolved in the current version of 4.2).
The Wireless IDS system is also famous for other false alarms which Cisco TAC has linked to alarming on normal behavior when a client goes out of range and a string of deauthentication messages is sent to make sure that the conversation has ended. The WLC 4.2 continues to flag these as false-positive denial-of-service attacks even though the IDS parameters could be adjusted (from the factory) to account for the known 64 repeated deauths that are sent.
The IDS file is capable of "tuning" but the parameters are very lightly documented. In fact, the IDS parameter file itself had the least sparse version of documentation and it is a text file only 200-lines long.
In terms of determining if a rogue AP is on-wire. This functionality does not work reliably (not just if there is no path on the wired network to the controller which is understandable) but even if the rogue AP is on the same subnet as the controller. It just plain does not work.
If you are attempting to determine if there are clients on the rogue AP, this mechanism works with limited success since the AP has to catch the client attaching during its brief scan interval. This results in misleading information.
There are other false alarms that appear to be related to a specific chipset (using the OUI / first octet of the MAC address). However, there has been very little movement on Cisco's part in getting resolution to getting these anomalies addressed. The basic attitude has been "if we didn't see it in our lab in San Jose when we wrote the code, there's nothing we can do". Since the IDS lacks any ability to "phone home" (sending the alarms it is seeing to the development team) they end up having to develop in a relatively limited environment.
For more information, please reference the following:
Wireless LAN Controller IDS Signature Parameters
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008063e5d0.shtml
I would send you the link to some of the bugs, such as CSCsj06015, CSCsh35010, CSCsk60655, etc. but the Cisco bug tool ( http://tools.cisco.com/Support/BugToolKit/ )is currently not working (no doubt the system is getting overworked). Maybe the site will be up when you read this.
In the interest of fairness, there have been efforts over the past year by Cisco to address these false alarms and a number of them appear to finally be resolved.
Bottom line: In my opinion, the wireless IDS is still not ready for prime time. To quote my customer, "I just can't trust it". Unless you set your customer's expectations fairly low, you will both end up disappointed.
That said, the product itself still has many compelling reasons to implement it including ease of installation and management. If you are willing to wade through the various bugs in the IDS and WCS it still is the best game in town.
- John -
Move data from one table to another table
Hi all,
I had a custom table called sales_data in that table there are columns like JAn,FEB,upto DEC including other columns so in each month there is some data total data is 23000 count but each month has has specific data like JAn-2500,FEB-2000 like that it has total 23000 records
My Requirement is i have to move data from one table to another table that too if i will pass jan only jan data should move like that feb,march,.....
in my table there is no month column i had get it from another table called gl_periods and by using cursor and case function i have written the code
well while when i am inserting data am passing year,month as parameters but 23000 data is moving it should get like that.
Please suggest me.its urgent
Thank YouHi hamid,
Please go through the below procedure.
CREATE OR REPLACE PROCEDURE APPS.copy_sales_to_forecast(p_fiscal_year varchar2,p_month number)
IS
CURSOR C1 IS select period_year,period_num,start_date,end_date from apps.gl_periods
where period_set_name='Accounting'
and period_year=p_fiscal_year
and period_num<=p_month;
type type1 is table of xxc_forecast_data%rowtype;
t1 type1;
BEGIN
FOR CREC IN C1 LOOP
BEGIN
DELETE FROM xxc_forecast2
where fiscal_year = crec.period_year
and attribute1='Copied From Sales to Forecast Table of Month '||crec.period_num;
END;
SELECT
product_category ,
product_sub_category ,
product_line ,
product_style ,
item_number ,
item_description ,
customer_name ,
customer_number ,
sales_channel ,
null ,
CASE
WHEN crec.period_num=1 THEN sales_amount_month1
ELSE 0
END Transaction_quantity_period1,
CASE
WHEN crec.period_num=1 THEN sales_cost_month1
ELSE 0
END item_cogs_period1,
CASE
WHEN crec.period_num=1 THEN sales_mtl_cost_month1
ELSE 0
END item_material_cogs_period1 ,
CASE
WHEN crec.period_num=1 THEN sales_mtl_ovhd_cost_month1
ELSE 0
END item_mtl_ovhd_cogs_period1,
CASE
WHEN crec.period_num=1 THEN sales_res_cost_month1
ELSE 0
END item_resource_cogs_period1,
CASE
WHEN crec.period_num=1 THEN sales_op_cost_month1
ELSE 0
END item_op_cogs_period1,
CASE
WHEN crec.period_num=1 THEN sales_ovhd_month1
ELSE 0
END item_ovhd_cogs_period1,
CASE
WHEN crec.period_num=1 THEN sales_units_month1
ELSE 0
END extended_amount_us_period1,
CASE
WHEN crec.period_num=2 THEN sales_amount_month2
ELSE 0
END Transaction_quantity_period2,
CASE
WHEN crec.period_num=2 THEN sales_mtl_cost_month2
ELSE 0
END item_material_cogs_period2,
CASE
WHEN crec.period_num=2 THEN sales_mtl_ovhd_cost_month2
ELSE 0
END item_mtl_ovhd_cogs_period2,
CASE
WHEN crec.period_num=2 THEN sales_res_cost_month2
ELSE 0
END item_resource_cogs_period2,
CASE
WHEN crec.period_num=2 THEN sales_op_cost_month2
ELSE 0
END item_op_cogs_period2,
CASE
WHEN crec.period_num=2 THEN sales_ovhd_month2
ELSE 0
END item_ovhd_cogs_period2,
CASE
WHEN crec.period_num=2 THEN sales_units_month2
ELSE 0
END extended_amount_us_period2,
CASE
WHEN crec.period_num=3 THEN sales_amount_month3
ELSE 0
END Transaction_quantity_period3,
CASE
WHEN crec.period_num=3 THEN sales_mtl_cost_month3
ELSE 0
END item_material_cogs_period3,
CASE
WHEN crec.period_num=3 THEN sales_mtl_ovhd_cost_month3
ELSE 0
END item_mtl_ovhd_cogs_period3,
CASE
WHEN crec.period_num=3 THEN sales_res_cost_month3
ELSE 0
END item_resource_cogs_period3,
CASE
WHEN crec.period_num=3 THEN sales_op_cost_month3
ELSE 0
END item_op_cogs_period3,
CASE
WHEN crec.period_num=3 THEN sales_ovhd_month3
ELSE 0
END item_ovhd_cogs_period3,
CASE
WHEN crec.period_num=3 THEN sales_units_month3
ELSE 0
END extended_amount_us_period3,
CASE
WHEN crec.period_num=4 THEN sales_amount_month4
ELSE 0
END Transaction_quantity_period4,
CASE
WHEN crec.period_num=4 THEN sales_mtl_cost_month4
ELSE 0
END item_material_cogs_period4,
CASE
WHEN crec.period_num=4 THEN sales_mtl_ovhd_cost_month4
ELSE 0
END item_mtl_ovhd_cogs_period4,
CASE
WHEN crec.period_num=4 THEN sales_res_cost_month4
ELSE 0
END item_resource_cogs_period4,
CASE
WHEN crec.period_num=4 THEN sales_op_cost_month4
ELSE 0
END item_op_cogs_period4,
CASE
WHEN crec.period_num=4 THEN sales_ovhd_month4
ELSE 0
END item_ovhd_cogs_period4,
CASE
WHEN crec.period_num=4 THEN sales_units_month4
ELSE 0
END extended_amount_us_period4,
CASE
WHEN crec.period_num=5 THEN sales_amount_month5
ELSE 0
END Transaction_quantity_period5,
CASE
WHEN crec.period_num=5 THEN sales_mtl_cost_month5
ELSE 0
END item_material_cogs_period5,
CASE
WHEN crec.period_num=5 THEN sales_mtl_ovhd_cost_month5
ELSE 0
END item_mtl_ovhd_cogs_period5,
CASE
WHEN crec.period_num=5 THEN sales_res_cost_month5
ELSE 0
END item_resource_cogs_period5,
CASE
WHEN crec.period_num=5 THEN sales_op_cost_month5
ELSE 0
END item_op_cogs_period5,
CASE
WHEN crec.period_num=5 THEN sales_ovhd_month5
ELSE 0
END item_ovhd_cogs_period5,
CASE
WHEN crec.period_num=5 THEN sales_units_month5
ELSE 0
END extended_amount_us_period5,
CASE
WHEN crec.period_num=6 THEN sales_amount_month6
ELSE 0
END Transaction_quantity_period6,
CASE
WHEN crec.period_num=6 THEN sales_mtl_cost_month6
ELSE 0
END item_material_cogs_period6,
CASE
WHEN crec.period_num=6 THEN sales_mtl_ovhd_cost_month6
ELSE 0
END item_mtl_ovhd_cogs_period6,
CASE
WHEN crec.period_num=6 THEN sales_res_cost_month6
ELSE 0
END item_resource_cogs_period6,
CASE
WHEN crec.period_num=6 THEN sales_op_cost_month6
ELSE 0
END item_op_cogs_period6,
CASE
WHEN crec.period_num=6 THEN sales_ovhd_month6
ELSE 0
END item_ovhd_cogs_period6,
CASE
WHEN crec.period_num=6 THEN sales_units_month6
ELSE 0
END extended_amount_us_period6,
CASE
WHEN crec.period_num=7 THEN sales_amount_month7
ELSE 0
END Transaction_quantity_period7,
CASE
WHEN crec.period_num=7 THEN sales_mtl_cost_month7
ELSE 0
END item_material_cogs_period7,
CASE
WHEN crec.period_num=7 THEN sales_mtl_ovhd_cost_month7
ELSE 0
END item_mtl_ovhd_cogs_period7,
CASE
WHEN crec.period_num=7 THEN sales_res_cost_month7
ELSE 0
END item_resource_cogs_period7,
CASE
WHEN crec.period_num=7 THEN sales_op_cost_month7
ELSE 0
END item_op_cogs_period7,
CASE
WHEN crec.period_num=7 THEN sales_ovhd_month7
ELSE 0
END item_ovhd_cogs_period7,
CASE
WHEN crec.period_num=7 THEN sales_units_month7
ELSE 0
END extended_amount_us_period7,
CASE
WHEN crec.period_num=8 THEN sales_amount_month8
ELSE 0
END Transaction_quantity_period8,
CASE
WHEN crec.period_num=8 THEN sales_mtl_cost_month8
ELSE 0
END item_material_cogs_period8,
CASE
WHEN crec.period_num=8 THEN sales_mtl_ovhd_cost_month8
ELSE 0
END item_mtl_ovhd_cogs_period8,
CASE
WHEN crec.period_num=8 THEN sales_res_cost_month8
ELSE 0
END item_resource_cogs_period7,
CASE
WHEN crec.period_num=8 THEN sales_op_cost_month8
ELSE 0
END item_op_cogs_period8,
CASE
WHEN crec.period_num=8 THEN sales_ovhd_month8
ELSE 0
END item_ovhd_cogs_period8,
CASE
WHEN crec.period_num=8 THEN sales_units_month8
ELSE 0
END extended_amount_us_period8,
CASE
WHEN crec.period_num=9 THEN sales_amount_month9
ELSE 0
END Transaction_quantity_period9,
CASE
WHEN crec.period_num=9 THEN sales_mtl_cost_month9
ELSE 0
END item_material_cogs_period9,
CASE
WHEN crec.period_num=9 THEN sales_mtl_ovhd_cost_month9
ELSE 0
END item_mtl_ovhd_cogs_period9,
CASE
WHEN crec.period_num=9 THEN sales_res_cost_month9
ELSE 0
END item_resource_cogs_period7,
CASE
WHEN crec.period_num=9 THEN sales_op_cost_month9
ELSE 0
END item_op_cogs_period9,
CASE
WHEN crec.period_num=9 THEN sales_ovhd_month9
ELSE 0
END item_ovhd_cogs_period9,
CASE
WHEN crec.period_num=9 THEN sales_units_month9
ELSE 0
END extended_amount_us_period9,
CASE
WHEN crec.period_num=10 THEN sales_amount_month10
ELSE 0
END Transaction_quantity_period10,
CASE
WHEN crec.period_num=10 THEN sales_mtl_cost_month10
ELSE 0
END item_material_cogs_period10,
CASE
WHEN crec.period_num=10 THEN sales_mtl_ovhd_cost_month10
ELSE 0
END item_mtl_ovhd_cogs_period10,
CASE
WHEN crec.period_num=10 THEN sales_res_cost_month10
ELSE 0
END item_resource_cogs_period10,
CASE
WHEN crec.period_num=10 THEN sales_op_cost_month10
ELSE 0
END item_op_cogs_period10,
CASE
WHEN crec.period_num=10 THEN sales_ovhd_month10
ELSE 0
END item_ovhd_cogs_period10,
CASE
WHEN crec.period_num=10 THEN sales_units_month10
ELSE 0
END extended_amount_us_period10,
CASE
WHEN crec.period_num=11 THEN sales_amount_month11
ELSE 0
END Transaction_quantity_period11,
CASE
WHEN crec.period_num=11 THEN sales_mtl_cost_month11
ELSE 0
END item_material_cogs_period11,
CASE
WHEN crec.period_num=11 THEN sales_mtl_ovhd_cost_month11
ELSE 0
END item_mtl_ovhd_cogs_period11,
CASE
WHEN crec.period_num=11 THEN sales_res_cost_month11
ELSE 0
END item_resource_cogs_period11,
CASE
WHEN crec.period_num=11 THEN sales_op_cost_month11
ELSE 0
END item_op_cogs_period11,
CASE
WHEN crec.period_num=11 THEN sales_ovhd_month11
ELSE 0
END item_ovhd_cogs_period11,
CASE
WHEN crec.period_num=11 THEN sales_units_month11
ELSE 0
END extended_amount_us_period11,
CASE
WHEN crec.period_num=12 THEN sales_amount_month12
ELSE 0
END Transaction_quantity_period12,
CASE
WHEN crec.period_num=12 THEN sales_mtl_cost_month12
ELSE 0
END item_material_cogs_period12,
CASE
WHEN crec.period_num=12 THEN sales_mtl_ovhd_cost_month12
ELSE 0
END item_mtl_ovhd_cogs_period12,
CASE
WHEN crec.period_num=12 THEN sales_res_cost_month12
ELSE 0
END item_resource_cogs_period12,
CASE
WHEN crec.period_num=12 THEN sales_op_cost_month12
ELSE 0
END item_op_cogs_period12,
CASE
WHEN crec.period_num=12 THEN sales_ovhd_month12
ELSE 0
END item_ovhd_cogs_period12,
CASE
WHEN crec.period_num=12 THEN sales_units_month12
ELSE 0
END extended_amount_us_period12,
CASE
WHEN crec.period_num=2 THEN sales_cost_month2
ELSE 0
END item_cogs_period2,
CASE
WHEN crec.period_num=3 THEN sales_cost_month3
ELSE 0
END item_cogs_period3,
CASE
WHEN crec.period_num=4 THEN sales_cost_month4
ELSE 0
END item_cogs_period4,
CASE
WHEN crec.period_num=5 THEN sales_cost_month5
ELSE 0
END item_cogs_period5,
CASE
WHEN crec.period_num=6 THEN sales_cost_month6
ELSE 0
END item_cogs_period6,
CASE
WHEN crec.period_num=7 THEN sales_cost_month7
ELSE 0
END item_cogs_period7,
CASE
WHEN crec.period_num=8 THEN sales_cost_month8
ELSE 0
END item_cogs_period8,
CASE
WHEN crec.period_num=9 THEN sales_cost_month9
ELSE 0
END item_cogs_period9,
CASE
WHEN crec.period_num=10 THEN sales_cost_month10
ELSE 0
END item_cogs_period10,
CASE
WHEN crec.period_num=11 THEN sales_cost_month11
ELSE 0
END item_cogs_period11,
CASE
WHEN crec.period_num=12 THEN sales_cost_month12
ELSE 0
END item_cogs_period12,
a.fiscal_year ,
a.budget_entity ,
a.organization_code,
a.customer_id ,
a.inventory_item_id ,
NULL,
NULL,
a.created_by ,
a.last_updated_by ,
a.creation_date ,
a.last_update_date ,
'Copied From Sales to Forecast Table of Month '||crec.period_num,
a.attribute2,
a.attribute3 ,
a.attribute4 ,
a.attribute5 ,
a.attribute6 ,
a.attribute7 ,
a.attribute8 ,
a.attribute9 ,
a.attribute10,
a.attribute11,
a.attribute12,
a.attribute13,
a.attribute14,
a.attribute15
bulk collect into t1
FROM xxc_sales_data a
where a.fiscal_year = crec.period_year
having CASE
WHEN crec.period_num=1 THEN sum(sales_amount_month1)
WHEN crec.period_num=2 THEN sum(sales_amount_month2)
WHEN crec.period_num=3 THEN sum(sales_amount_month3)
WHEN crec.period_num=4 THEN sum(sales_amount_month4)
WHEN crec.period_num=5 THEN sum(sales_amount_month5)
WHEN crec.period_num=6 THEN sum(sales_amount_month6)
WHEN crec.period_num=7 THEN sum(sales_amount_month7)
WHEN crec.period_num=8 THEN sum(sales_amount_month8)
WHEN crec.period_num=9 THEN sum(sales_amount_month9)
WHEN crec.period_num=10 THEN sum(sales_amount_month10)
WHEN crec.period_num=11 THEN sum(sales_amount_month11)
WHEN crec.period_num=12 THEN sum(sales_amount_month12)
END !=0;
FORALL i IN t1.first .. t1.last
INSERT INTO xxc_forecast2 VALUES t1(i);
--commit;
END LOOP;
END;
Thank You -
I have a Problem with my new AIRLAP 1242 to connect with WLC 4400
after debug in my airlap it shows :
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.123-7.JX8"...######################################################################################################################################################################################################################################
File "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.123-7.JX8" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 19-Mar-07 01:42 by hqluong
Image text-base: 0x00003000, data-base: 0x004051E0
Initializing flashfs...
flashfs[1]: 9 files, 3 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 5062144
flashfs[1]: Bytes available: 10936832
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1242AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCW1411U0FZ
PowerPCElvis CPU at 266Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 68:EF:BD:5F:9A:18
Part Number : 73-10256-07
PCA Assembly Number : 800-26918-06
PCA Revision Number : A0
PCB Serial Number : FOC14093XU3
Top Assembly Part Number : 800-29152-03
Top Assembly Serial Number : FCW1411U0FZ
Top Revision Number : A0
Product/Model Number : AIR-LAP1242AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:05.608: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:06.858: %DOT11-2-VERSION_INVALID: Interface Dot11Radio0, unable to find required radio version 581.18
*Mar 1 00:00:06.858: Interface Dot11Radio0, Accepting as a test version of radio firmware
*Mar 1 00:00:06.878: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:07.234: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:08.212: %DOT11-2-VERSION_INVALID: Interface Dot11Radio1, unable to find required radio version 581.18
*Mar 1 00:00:08.212: Interface Dot11Radio1, Accepting as a test version of radio firmware
*Mar 1 00:00:08.232: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:09.278: %SYS-6-LOGGERSTART: Logger process started
*Mar 1 00:00:09.326: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 19-Mar-07 01:42 by hqluong
*Mar 1 00:00:09.332: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
*Mar 1 00:00:09.388: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning frequencies for 32 seconds
*Mar 1 00:00:10.271: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:10.332: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:10.332: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:11.271: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:28.331: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:28.361: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2462 selected
*Mar 1 00:00:28.362: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar 1 00:00:28.363: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:28.369: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5260 selected
*Mar 1 00:00:28.372: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:28.398: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:28.399: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:28.465: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:29.398: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:29.465: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
Translating "CISCO-LWAPP-CONTROLLER.ekahospital.com"...domain server (202.134.0.155)
*Mar 1 00:00:38.351: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 172.31.xxx.xxx, mask 255.255.255.0, hostname AP68ef.bd5f.9a18
*Mar 1 00:00:38.820: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2417 selected
*Mar 1 00:00:38.827: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5200 selected (203.130.196.5)
*Mar 1 00:00:49.835: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2422 selected
*Mar 1 00:00:49.842: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5220 selected
*Mar 1 00:00:49.851: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar 1 00:00:49.852: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar 1 00:00:49.852: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Mar 1 00:00:50.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:50.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Sep 18 07:02:25.504: %LWAPP-5-CHANGED: LWAPP changed state to CFG
*Sep 18 07:02:29.288: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve CISCO-LWAPP-CONTROLLER.MYDOMAIN.com
*Sep 18 07:02:30.504: LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response
*Sep 18 07:02:30.551: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET CONFIG RESPONSE.
*Sep 18 07:02:30.551: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
flashfs[0]: 9 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 5062144
flashfs[0]: Bytes available: 10936832
flashfs[0]: flashfs fsck took 26 seconds.
Base ethernet MAC Address: 68:ef:bd:5f:9a:18
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
and after that i check in my WLC that shows
AP with Base Radio MAC xx:xx:xx:xx:xx:xx (APxxxx.xxxx.xxxx) is unable to associate.
The reulatory domain configured on it '-e' does not match the controller's country
code: USA
i found that the problem about the region.
question :
1. is it possible to change the region in AIRLAP 1242 or in WLC?
2. if possible how to change it?
INFO :
my first AIRLAP Product/Model Number : AIR-LAP1242AG-A-K9 and my new AIRLAP Product/Model Number : AIR-LAP1242AG-E-K9WLC GUI >> Wireless >> Country >> Select the country.
Regards
Surendra -
Hi,
I have a WLC 4400 and a WCS 5.2. I'm receiving alarm about flood atacks and desauthentication attacks from a client. These alarms are detected by the IDS system. I'd like to know if there are any way to block this client.
Thanks a lot.Thanks Sschmidt,
I saw this solution. The problem it's that i must create an entry by any client. If there are any client that capture the wpa key and after chage his mac i couldn't block them. Is that correct? I don't know how easily it's capture authenticantion packets with a WLC.
Thanks -
Hi ,
I have wlc 4400 with 1010 AP's wireless set-up.
Everything is working fine but unfortunately , I am coming across with one issue that, clients are not getting authenticated.
If I see the status of respective client in WLC :
status : Associated
Auth : No
Policy manager : 802.1X REQD
I read about PEM ( Policy enforcement Module ) , as it is going through same procedure but policy manager should in " RUN " condition , Unfortunately it is not.
how do i resolve this issue ?Hi Vinod,
The 802.1X_REQD state would suggest that the client cannot complete L2 authentication.
If possible, it would be helpful to collect the following debugs from the WLC while trying to connect the client:
debug client
debug aaa event enable
Also, please attach the full text output of the command "show run-config" and let us know the WLAN through which the client should be connecting.
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
How to disable Password Recovery in WLC 4400
Hi All,
I need your help to disable the password Recovery for the WLC 4400, in case of the hardware stolen or hacking by internal hacker,
Thanks in advanced for your help,
AhmedGee whiz. This is the second post you've made in regards to disable password-recovery mechanism. For the WLC, I agree with Nic, it's not possible. And, for the record, there are ways to bypass a disable-password-recovery mechanism. This is mainly due to prevent un-authorized use of this mechanism by, for example, a disguntled network administrator from shutting down a network.
-
WLC 4400 - Different minor versions same mobility group?
Hi all,
i have 2 WLC 4400 integraded in 3750G.
One has 6.0.202 and the other 6.0.188.
They are in different places but now i want to put them in the same mobility group.
Will this difference be a problem?
BR
AnthonyYes it will be an issue. You have to remember that the AP gets it firmware from the WLC image. So if an AP has to mi e from one to the other, it will either upgrade or downgrade each time. Best practice is to keep the firmware the same.
Sent from Cisco Technical Support iPhone App -
Hi
The scenario is as follows:
We deployed a WLAN with a WLC 4400 and several LWAPs. The main configuration include 2 SSID, one for guest access (internet and a limited access to internal resources) and one with complete access to the internal resources. For the "guest" SSID the access control is done trough an ACL placed in the core cat 6500 switch. This ACL blocks the access from "guests" to several subnets including the subnet where the WLC resides.
No one "guest" WLAN user can ping or access any host located in the subnet where the WLC is configured, but they can ping and access the WLC via https!!!
The goal is to block the acces to "guest" users to the WLC. And let the WLAN users with complet access to manage wirelessly the WLC.
Can this be done?
I know that the wireless administration can be enabled or disabled but it applies to all the WLAN users no just the "guest" users.
Any idea or suggestion is quite welcome
RogerHi Roger,
You can configure CPU ACL if you are running 4.0 release on your controller. In CPU ACL you can deny telnet as well as HTTP access from client subnet to the management ip address of the controller which will block the access of guest user to access the controller via web or cli and also you can block the icmp traffic from guest user subnet to the controller ip address.
You can configure acl from cli or web but to apply that acl to cpu you an do it via cli only.
HTH
Ankur
*Pls rate all helpfull post -
WLC 4400 Not authetnicating between GUEST and Private networks
Hello,
I have a problem. I have a WLC 4400 and the problem i´m encountering is that when a user authetnicates to the private network, and then tryies to autheticate to the Guest network, it just stays there, it doens't do anything. Same way around, if you authenticate tothe Guest network, and change to the private network, it just sits there. I pointing that the problem is with Authentication, but not sure if i´m correct.
Can anyone help me?? what ifnormation will i need to retreive from the WLC to see where the problem lies??
I will get the debug mac addr <client-MAC-address xx:xx:xx:xx:xx:xx> and repeat the issue in order to see if i get anything from the client.
Thanks for the help
TonyThanks for the help.
Actually the problem was that the WLC had a wrong time and also we had on our DHCP a 24 hour lease, so we were running low on IP´s.
Change the lease for 8 hours and set the time correctly and the issue got solved.
Thanks. -
WLC 4400 4.2.176.0 Ver and Windows Vista
We recently upgraded our WLC 4400s to 4.2.176.0. This was requested by Cisco. When the students returned from Christmas break, any student running Vista is able to authenticate to the AP, get an appropriate IP address and DNS configuration, but cannot get to any network resources, including Internet. If we hard code the DNS information in the wireless card TCP/IP Properties, the user can get to some Internet sites, but no HTTPS pages.
All XP and MAC machines appear to be working fine.
Any thoughts?The problem is that its not deauthenticating the user, its just dropping completely and disabling the windows zero configuration in the services. I do not know how or what in the WLC would do this? I really dont think this is anything that I can control. I am guessing that there is an internal conflict on the pc. I have been told that the image used to image the machine has had the manufacturers wireless client utility removed. I did find a DW Utility in the services list. I think that is my problem. I did however go ahead and upgrade them to 5.2.193. All I can do is have the customer monitor and see what happens. Will post an update when I get one.
-
Hi,
Can anyone tell the detail proceture/doc to remove software version 6 from a WLC 4400 and install a lower version of 5.1?
Thank you!Sorry for the late response.
Actually I found the version 5.1 software is still on the controller as backup, so I just made this one as ACTIVE.
The reason I changed it back is the web-autnetication against Radius didn't work - didn't accept usename/pwd. After comparing the log on radius, the only difference is that version 6 sent NAS-Port-Type: Wireless - IEEE 802.11 to radius but version 5 don't. Any idea?
Thanks!
Maybe you are looking for
-
I love Siri. It's useful and fun and I love messing with it but why can't I name it? It's sort of a petty thing but I would like to be able to name our phone companions. Also apple kinda needs to fix the location services thing with the other Siri vo
-
Lost all contacts after updating to ios 8.2
I updated my phone to the new ios 8.2 and after installing the update my contacts were gone. I didn't have them backed up to icloud. How do I get them back?
-
Change history of work center in Prodn Order
Hi All, We currently are changing the work center in prodn order via an ABAP program number of times based on various conditions. We would like to know the change history for the work center in prodn order. Is there any <b>transaction or report or fu
-
Can RH let me insert a custom/personal icon for my published HTML Help project?
Just wondering if there's a setting inside of RH8 for setting the icon in the browser URL bar? (for example, there's a little red and white icon with barely visible "Adobe" in the browser address bar above...or facebook has the blue square with the w
-
Run windows in macbook pro 13 inch
hi there im still considering whether to buy 2.4 or 2.66 ghz.. can 2.4 macbook pro runs windows smoothly?either by using parallel desktop or bootcamp if 2.4 can,why should i buy the more expensive ones,right? thanks in advance