Move audio and video between tracks simultaneously

If I have a video clip on V1, with linked audio on A1, I would like to move them both to V2 and A2, respectively, at the same time.  Is this possible?  I like to work this way to easily keep track of which video goes with which audio.

There is a practical logic why one moves Audio and Video separately.
Audio does not care what track its on...but video does (layering).
Audio tracks are frequently checkerboarded (  A&B'd) to create overlaps and enable J & L Cuts to Video.
It would be too easy to overwrite audio if it chased video track for track.
You need to use track and source targeting to organise your timeline if thats your requirement.
If the Video and Audio are linked

Similar Messages

  • Re: Separating audio and video

    When you feed your video through a processor, the processor itself will separate the audio and video into "tracks" which you can then iterate through and enable / disable as you please. If you want just video, disable all the audio tracks, and vice versa.
    Take a look below the "// Program the tracks." comment in the following example file:
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVTransmit2.java]

    Thanks...

  • Syncing Audio and Video but wish for the Audio not to move on timeline?

    Has anyone worked out how to sync audio and video within Premiere Pro but have the Audio stay fixed on the timeline and the video move? Every way I try it Premiere Pro insists on moving the audio. Locking the track does not work as you cannot select the audio within it to Sync with.
    I have a music video shoot with 14 camera angles used on the lead singer (don't ask me why). Multi-camera editing is not an option as there are too many sources for my brand new MacbookPro to handle. I think I would need the computer from Superman II to edit that many clips together.
    What I am doing is syncing the first clip, the one Im going to use as the baseline fall back shot and then I need to sync other clips onto the timeline. However Premiere Pro insists on moving the audio to fit with the video not visa-versa.
    Any help would be appreciated.

    @slitchfield: on the mentioned page, it is stated that "Improvements in screen real estate, with slimmer top status bar and optional (in some apps) bottom toolbar, meaning that all phones will have a larger useful display area."
    But on the E6 the bottom toolbar decreases available screen size in most apps, most noticeable in Web browser where the full view has gone. The bottom toolbar is not optional, you can't configure it yourself.
    And: "Homescreen widgets will now come in up to five different sizes (1x1, 2x1, 4x1, 2x2, 4x4) and allow a greater degree of interactivity.", but on the E6 they are in only one size, always with large borders and other visual effects.
    So beware of differences between phones, perhaps some aspects of Belle work differently depending on the type of device.
    "Notes now brings up a white (and AMOLED-unfriendly...) editing screen.": that you can change by switching themes, "Dark Solid for Anna" does a good job. It is a shame that the lines of Notes have gone though.
    When switching themes, I found you have to restart the phone, otherwise the theme doesn't get properly loaded in all apps. Stopping/starting apps is not enough. So when experimenting and loading one theme after another, you may end up with disfunctional combinations of black-on-black and white-on-white, but it may not be due to the last theme. Also you may end up with a good combination that isn't around anymore the next time you restart your phone.
    Current N900 and former E6 user regretting Belle upgrade
    Devices owned: 2110, 2110i, Cellular Data Card, 8110, 7110, 6210, 6310i, 6100, 9500, 6233, 5140i, 3109c, N900, E6-00

  • Audio and Video tracks don't go up/down together EVEN when linked selection is checked!

    I'm sure this is something really simple but I just can't figure it out. And it must be a button or a option that I've checked because it didn't use to do that a few days ago.
    Basically, I have a clip on the timeline which has a video and an audio track. I want to move the video clip up to the next video track but I want the audio to move down to the next audio track too. Right now it's not doing that. Only the video file moves up to the next track and the audio clip remains in the same track. How do I fix that so that however many tracks I move the video up by the audio goes down by that same number of tracks?

    Hi Shooternz,
    shooternz wrote:
    Not sure how other NLES manage it but I think it would be a pain if audio  automatically followed video in this respect.  eg Blocked layers b'cos something is already there.
    FCP &, and earlier behaved that way. I prefer the way Premiere Pro does it. You often do not need to move the audio to a different track when you move video to another track. I want to control the placement of audio and video separately now.
    Thanks,
    Kevin

  • How to fix problems between audio and video sync?

    Hello, I have this old camera DSR 200P and I'm trying to import to my final cut pro x. The importation success well but at the end the syncro between audio and video doesn't work. How can I fix it?
    It's possible my mac doesn't accept this kind of camera or should I change any options of final cut?
    Thank you

    I use to edit footage for a client that was recorded on a DSR-250 (successor of the DSR-200) and every time, every single time, the audio sampling rate would not match my Sequence settings of 48khz, 16bit.  The sampling rate of the captured video was always off by a slight amount. It might be 47999.9 one time and 48000.1 the next time ... but it was never at 48000 as it should have been.  I chalked it up to Sony using cheap synthesized crystals (frequency generator) to control the rate.
    Anyway, the fix was to export the captured clip using QuickTime Pro with the export's audio settings to 48khz, 16 bit.
    -DH

  • In elements 10 audio and video tracks loaded but appear to be blank

    running windows 7 with elements premiere 10... i have my audio and video loaded in the session but the tracks, 2 video with audio and one audio only track, appear to have no info. they play, but i cant see the wave file image.  i need to see the file and be able to zoom in so i can line it up for syncing.  i had at least the audio showing up at first, but somehow that seemed to disappear now? how do i fix this?

    sadworld4804
    The wave representation that you seek is in the pek file of the cfa and pek set for the audio. Did you let your audio go to completion for audio conforming before starting any work on the project?
    But, I am suspecting something else which is easy to remedy and hope this is it.
    1. Look to the left where it says track name, Audio 1, to see a speaker icon. You can toggle that to get 2 different "Audio Track Display Styles"
    and
    Please let us know if that was the issue, that is, the toggle choice for the "Audio Track Display Style".
    Thanks.
    ATR

  • Audio and Video option missing from Export Quicktime Movie Include

    Today as I was exporting a clip, I noticed that the Audio and Video option was missing from the Include drop down. I only have the options of Left, Center, Right.
    I highlight the sequence, control E (or File>Export>Quicktime Movie) and the Save window comes up. The Settings drop down is the same, the Markers: drop down is the same, but the Include: has the options of Left, Center and Right. I thought the Video and Audio dropdowns were always there. I hate to admit it, but I have not paid attention to them in a while. Getting old I guess.
    Sequence settings is 720x480 NTSC DV (3:2)
    NTSC - CCIR 601 / DV (720x480)
    Lower (Even)
    29.97
    QT Video Settings
    DV/DVCPRO - NTSC
    100%
    Audio
    48 kHz
    16-bit
    Channel Grouped
    Did I miss something?
    Thanks

    Thanks, forgot about that.
    For what ever reason it started working correctly a couple of hours later, after I started an SD project. The video came out fine
    I had been trying out a couple new applications, so maybe one was causing it. I will see if it happens in the future.
    Jim

  • TS1362 All of the movies I have rented or purchased from iTunes in the last 4 months fail to play properly. The audio and video are constantly out of sync. I have followed the iTunes suggestions to correct this, however nothing has worked. (Windows 8)

    I am using a Dell inspiron 14z, with Windows 8, and before that a Dell with Windows XP. This is also happening on my iPad. For the last four months, none of the movies or television shows I have rented or purchased from iTunes have played properly. The audio and video are out of sync. I have tried the troubleshooting measures iTunes suggested, however nothing seems to work. I have read on the community that this has been a problem for users in the past, and have attempted to try some of the fixes individual users have suggested also. Again, nothing seems to work. At this point I am frustrated, as we purchase or rent almost exclusively from iTunes. I would appreciate a support-staff person response. Thank you so much.

    this problem has been going on for windows users for over a year now.
    Apple has no solution to this problem.

  • Audio and Video become increasingly out of sync when watching a movie.

    When I watch a movie from my itunes folder (purchased) the audio and video become increasingly out of sync. It is like watching an old Godzilla movie. I am using itunes on a Dell XPS M1530 running windows 7. Does anyone have a solution to this? I am not sure if I have a hardware problem or a software problem.
    Thanks,
    J

    Hello Robert Sharrock,
    The following article can help sort out most playback issues in iTunes for Windows.
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/TS1718
    Cheers,
    Allen

  • How do I combine separate audio and video files into one Quicktime movie?

    I have DVDs that contain separate audio and video files in folders marked Audio_TS and Video_TS. I would like to know how to combine these files into a single Quicktime movie. Is there inexpensive or shareware software that imports and unites these files reliably? A simple solution is preferred, rather than getting into complex media editing applications.
    G4 eMac   Mac OS X (10.4.9)  

    Doug - the VOB files (in the VIDEO_TS folder) are MPEG-2 files. MPEG-2 have the video and audio mixed into the one file - there are no audio files to combine.
    The rest are directions to a DVD player (e.g. the BUP and IFO's) . The AUDIO_TS folder is used for DVD Audio discs and on video DVDs is always empty.
    Many people use Handbrake or iSquint to convert VOB to iPod video though MPEG Streamclip is the best - open the first numbered VOB and it will prompt you to open all of them. ALWAYS fix timecodes when it asks. You can then edit/trim and export to MPEG-4.

  • Grouping Audio and Video tracks?

    iMovie HD:
    When I insert new clips or edit existing ones, my imported audio tracks lose sync with the clips that come after the place of edit. I am continuously manually re-aligning the audio which is very time consuming.
    Is there a way to group or link Audio and video so the that imported audio will stay in sync with my clips?
    I understand that it may not be possible for the clip I am working on, but what about the clips after the clip I'm editing?
    Christo

    Found the answer: "Lock audio clip at playhead"

  • I'm trying to record audio and video simultaneously using iMovie and an external mic and the computer is picking up the audio but when I replay the video there is no sound. Any ideas?

    Can't get iMovie to record audio and video at the same time using the built in cam and an external mic.

    iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
    You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
    (note: remember what you changed it from so you can change it back later, before you import another CD)
    Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

  • HT1933 when i play my purchased movies in HD there the audio and video quality is poor

    I have purchased movies in HD but when i try to play them the audio skips and there is skipping in the video as well. However i also have a few movies in Sd and they do not have these problems. However even though the computer im using is not a MAC is an extremely nice Asus with a 4th gen I5 and supports HD video playback. Anyone know what to do  I tried to get help from apple and they scheduled me a phone call two weeks from now? some help right?!

    Can anybody suggest me how can I improve the quality of audio and video in JMF Player ? Below here I am providing the source code of the JMF Player I am using:My suggestion would be to use a supported OS with your JMF. JMF doesn't support "Ubuntu 8.04 and MAC OS 10.5", it only supports Redhat and Solaris (and Windows 9X or NT 4.0)

  • Create a DVD using Premiere Pro and Encore - delay between audio and video (in ms)?

    I created a DVD and need to be sure that audio and video are in perfect sync (smaller than 1 millisecond).
    Is this even possible with Premiere Pro / with DVDs in general?
    My sequence settings in Premiere are:
    DV PAL, 25 fps, 720x576 (16:9), D1/DV PAL Widescreen, lower field first, Audio: 48000 Hz
    My DVD settings in Encore are:
    MPEG-2 (MainConcept MPEG-Video), 720x576, 25 fps, lower field first, Widescreen 16:9 (1,458), Bitrate VBR, 2-Pass, Min 1,5 MBit/s Target 4 MBit/s, Max 9 MBit/s, GOP: M-Frames 3, N-Frames 12, Audio: Dolby Digital, 192 kbit/s

    I created a DVD and need to be sure that audio and video are in perfect sync (smaller than 1 millisecond).
    Is this even possible with Premiere Pro / with DVDs in general?
    Frame accurate is the best you can achieve and that means 33 milliseconds at best.

  • Record Audio and Video Simultaneously.

    Hey,
    So I have Quicktime pro and I know how to record a video using my built in camera on the imac.
    I also have logic and am more than capable of recording through various input devices such as mics, keyboards and guitars.
    But how can I record a video of myself and audio input, such as a mic/me talking/whatever at the same time?
    I'm using a digidesign Mbox 2 for my audio input.
    Thanks

    What happens when you set your inputs properly and record a clip in, say, PhotoBooth? Do you get audio and video? It should be pretty much as straightforward as that.

Maybe you are looking for

  • Cost transfer posting within Training and event management

    Dear experts! Now, I'm getting some issues about transfer posting in Training and event management. - The first, I create business event. - Second, I posted cost of business event to CO. when I posted to CO, I only want to give cost of business event

  • Benefits

    Benefit Administration: This section of the Implementation Guide (IMG) is where you set the SAP Benefits Administration component. Here you enter in the system all the details of the benefit plans offered by your company. Benefit Area: Benefit areas

  • Workflow Timestamps?

    I am trying to capture user activity for steps of a workflow in my underlying library (not just in the workflow history). I have tried using lookups to copy the "date occurred" from a specific log/history message, which is successful, but always disp

  • Export PDF is not working

    I  just purchased and tried using export tool. First I tried uploading a doc through the web interface - I get a file not found error then I tried uploading via my pdf tools  interface... It appeared to upload and convert the  doc but then an error m

  • Limited to 5 Clock widgets ?

    Hi, in the past I had 7-8 different clock widgets with several timezones. It was quite handy to check about the time of day of my connections around the world before calling them. Since the ML upgrade, some of these clocks are weird: there is no butt