Move audio to original record position

"Move audio to original record position"
This feature does not work.
Try this......
Record Audio, move audio, select feature, works
Now Try This.......
Record audio, change tempo, select feature, doesn't work, the audio is moved but incorrectly, - should move audio to original time stamp regardless of tempo change

Similar Messages

Move to original recording position

Imported 7 tracks from a live 1,5h recording of a concert. This was recorded using Tracktion using 8 mics into eight tracks. I've tried to get into Logic before and gave up. More than once... Since I've decided to once again try to become a friend of Logic for recording, mixing and editing acoustic music I have decided to do the audio editing/mixing in Logic. Import went well. I began to remove unused parts from various tracks and accidentally moved a region along the timeline. No problem - "Move to original recording position", but this command has no effect. Nothing happens. All files are BWAV files 1,5h long. I expect the region I ask to "Move to original recording position" to do just that. What's wrong?
L

Lars Farm wrote:
No, I've trimmed the regions. They no longer start at 00, they are no longer of equal length. I've slpit regions during pauses throughout the recording and the accidentally moved regions where more than 45 min into the recording. So I'd need to set the start of each region relative to its original position in the recording = the original region.
You understand that regions are really only pointers to the original wave file. If you chop a region into pieces and move the new regions around you are only editing a set of instructions on how to play the wave file... unless you choose to make the regions actual wave files.
The main purpose of BWAV files to place the imported waves at the correct start time, regions are a completely different animal.
If you accidentally move a region, immediately use UNDO and the region will move back.
pancenter-

Broadcast Wav files from PT to Logic not moving to original record position

Okay, my system needs upgrading but I'm stable (at least I think I am til now!) I have a TV network sending me broadcast wav files from PT. They shoot their video on a 24 hour clock. I'm to be editing and mixing (in Logic) their audio tracks from PT and send them back as broadcast wav files for them to sync back to their video. After years and years of recording and producing music, this TV world is a first for me. 2 issues at hand that are causing trouble.
NUMBER 1: The wav files will not snap to original record position. I keep getting an error message about "out of range" and of all craziness with a negative SMPTE number. ??? The prompt suggests an offset error. But there isn't I can find. Start time is set to 0:0:0.0.0 here and at the TV studio. They film at 29.97d. That matches as well. Sample Rate is correct at 48k 24bit. I've uncovered every thing I can think of. I did have to set the tempo down to 5 BPM in order to see a full 24 hours in SMPTE.
NUMBER 2: I can't figure out how to see the timestamp start time of the audio files in the audio window. I have every option turned on in the VIEW option, I can see length, but I see nothing about start time of original record time. Am I missing something simple here? Seems like a very standard option that should be easily accessible. It would allow me to prepare the location on the time line.
Overall, I'm hoping I can do all the above with my current rig but realize that the clock is ticking toward a whole new system with Logic 9.
Help please. Don't want to lose this client.

Sure do appreciate everyone's willingness to help. Setting SMPTE start to 24:00:00.0.0 didn't work either. I confirmed with the studio manager at the TV station also that they run a 24hour clock with 0 being midnight.
I'm really hoping that the error is on their end.
*It would help me if anyone knew how to VIEW the Timestamp info attached to the wav files. That would at least give me an approximate idea of where they should be.*
I'm supposed to be editing and mixing the voice dialog from numerous different scene takes that were shot throughout a day of filming. It's critical that I can see all these different takes that were captured over hours of open recording. Some of the files are almost 4 hours long. It's a big project and I'm sure hoping I can stay inside Logic to get it all done with excellence.

Can no longer select or move audio clips on Narration track - what happened??

I began my first Adobe Premiere Elements 11 project this morning, a short video (5 mins) I intend to upload to YouTube. It's a comedy sketch involving inanimate objects that "talk", so it requires a lot of dialogue to be added to, in this case, the Narration track.
I am not new to Premiere Elements. In fact, I've done quite a bit of fairly complex editing on previous versions of the software (I upgraded to 11.0 from 8.0). I've never had this problem before.
After editing this project for well over 2 hours with no problem, I can suddently no longer move or even select any audio clip on my Narration track. They are just frozen and stuck there. Everything else works normally. I can select and move all other clips on all other tracks. Further, all audio clips will play, even the ones on the Narration track. However, I can no longer move, select, or even add any clip to the Narration track.
I opened a new project to see if the problem persisted, but it didn't - I could add, select, move audio clips on the Narration track just fine.
I'm stuck and bewildered. The project I've already invested 2-3 hours into seems permanently broken. The audio clips on my Narration track will play, but I can't select, move, or otherwise do anything to them.
My fear is not just that I'll have to start this project over again, but I'll never know when it will break again, and I'll lose all my work again.
Help!
Seriously, does anyone know what's happened?

sleinbach
Thanks for the details. As I suggested this idea that I had after reading this thread may be just nonesense, but I thought it would be interesting to try.
This is recommended done with a copy of the project that you have now.
For now, let us assume that the missing track names are part of the locked Narration Track syndrome. I am not sure if your narration clip was generated in Premiere Elements narration feature or created elsewhere and brought into the program. That would be interesting information to have. But, nonetheless, moving forward with this idea.
Given you cannot move, delete, change, etc what is on this Narration Track. Whatever is on that Narration Track traces back to an original on the hard drive and probably is shown in Media Cache's (Adobe Folder) as conformed audio cfa and pek set.
a. Find the narration hard drive hard location and move it to a new location (special folder on hard drive). When you go back to the copy of the problem project, you should be greeted with one of those "Where is....?" messages. Cancel out of that. Do not do anything within that message dialog.
b. Right click the thumbnail for your narration in Project Media and select Replace Footage. Then browse to and select the original that you had moved to the computer desktop and the special folder there.. Click OK. That should restore the file (including whatever effects were made to the file) to the project.
c. Has any of that had any effect on unlocking the Narration Track?
Other maneuvers to try
a. Trying to locate and delete any cfa or pek files associated with the problem audio.
b. Switching to an Aero Theme for Windows if you do not have one set so far.
Thanks for giving all of that a look at.
ATR

How do i know what audio resolution i recorded at?

I'm not sure what audio resolution i recorded a project at and I don't think the audio resolution selection in the Preferences stays where you set it for each individual project, I believe it defaults to 'Good'. thanks.
-Brian

Cartner wrote:
I'm not sure what audio resolution i recorded a project at
You could always export it ("Share") to itunes. Once in iTunes, you could Get Info (click Command I), and the Summary page will list the resolution.
(make sure to "Send your song to iTunes in its original quality" - don't compress).
Cartner wrote:
I don't think the audio resolution selection in the Preferences stays where you set it for each individual project, I believe it defaults to 'Good'.
My experience is that it does remember its last setting, and doesn't change until you change it.

How can I choose the movy language? I know several ones and enjoy watching the movies in the original one.

How can I choose the movy language? I know several ones and enjoy watching the movies in the original one.

If the film's description page says that it has different audio tracks then you should be able to select the language via the playback control : http://support.apple.com/kb/HT5562

QT Player 10.2 no audio in Screen Recording

Unable to record accompanying audio with Screen Recording - video is perfect.

Unable to record accompanying audio with Screen Recording - video is perfect.
If you are referring to "system audio" (i.e., such as the audio in a movie being played on your screen), then that is not a QT screen capture option and you would need to invest in a third-party screen capture app with this feature.

Problem with audio quality using Record Audio Comment

I am recording audio comments in Adobe Acrobat Professional using the "Record Audio Comment" tool. The sound quality is bad--very scratchy and has a noisy hum. I am using a good USB headset/microphone. Recordings outside of Acrobat are fine, e.g., in Audacity. I have tried two different microphones with both Acrobat 8 and 9 on two different computers (a desktop and a laptop) with similar results.
I have not found an audio quality setting in Acrobat. Is there some way to improve the audio quality when recording comments? I suspect Acrobat is compressing the audio so much in order to save file size, however, the poor quality makes it almost unusable.
Thanks in advance for any suggestions or advice. I know I can record outside of Acrobat and then add the pre-recorded audio as a comment, but that defeats the purpose.
Bev

Sorry to hear you are having problems.
A few things you can try:
1. Turning the volume of your TV up too high during a call can cause the kinds of audio problem you describe. Try turning the TV volume down and this should stop the 'feedback' problems you are having.
2. If you are using external speakers, then try switching these off and using the speakers built in to the TV. The TV was originally tested for Skype using the TV's internal speakers, so if you have a soundbar or other external speakers connected, the audio performance may suffer on Skype calls.
Best wishes

M-Audio FastTrack USB recording isn't working?

M-Audio FastTrack USB recording- I installed it, and am trying to record sound through my keyboard. I can hear the sound through my headphones, and Audition recognizes the device, ( I have the input set to Mono > Line In 1 FastTrack) but not the sound. The level bar won't move or anything. I have no clue why this isn't working and I've been messing with it for hours so I'd really appriciate some help!

Since this behavior usually indicates an interruption in the communication between Audition and the audio driver, I wonder if a "force driver reload" button would help. I'm not sure if the application can automatically sense this state since there appears to be enough of a data stream to make it appear as if things are ok.
Either way, it's something that needs investigation.

Move audio in iMovie

Hi!
How to move audio relative to video?
I have video and audio recorded separately. On my video camera is poore microphone sound when I'm away from the camera. So the sound I'm writing on a digital recorder. Then combine sound and video tracks in video editor.
How can i do this in iMovie? How can I move the sound relative to video?

Yes you can, just make sure you get the audio into an iMovie compatible file format before you drag it in. Easiest way to do this is to add it to your iTunes Library and let iTunes do the necessary conversion. When you are in iMovie, you will pull the audio track from the iTunes Browser window along the right side (It's a music icon on one of the buttons in a row). Drag from the iTunes Browser and drop it right dead center on the video clip where you want it to start. It should then take the form of a title box, just below the video clip. That box can then slide left and right to more closely match and sync with the video image.

Can't save pictures on original folder position after edit...since I'm upgraded to IOS7 on IPad2.

can't save pictures on original folder position after edit, get save popup to save at different position, also still on toubles to get them back to original folder positon since I'm upgraded to IOS7 on IPad2.

I say the problem is probably noted, and probably will be resolved. Not that i can speak for Apple. I find the "problems" of wallpaper to be pretty minor compared to the advantages of iOS 7. The fun of wallpaper has always been pretty insignificant here.

Is it possible to lock an audio track in "record enabled" mode?

Here's how i write... i set up a drum loop to play for around 20 minutes, then I rec-enable one audio track to record vocals, and then finally, I skip around among hundreds of different midi tracks.
I just hit the down arrow button, and scroll through dozens and dozens of midi tracks. I quickly hit the keyboard to listen to the sounds. If i like a particular sound, i just want to hit record, and instantly record my vocals along with the midi performance.
Unfortunately, when i hit record, the vocal/audio track doesn't record. Right at the moment when i find an inspiring sound and hit record, the vocals just don't record.
I'm forced to scroll miles up the arrange window, to find
the vocal audio track. It's still blinking the red "rec" button, but this is misleading. It's not actually record enabled. I have to hold down shift, hit it once to turn it off, then hit it again to re-activate record function.
Only then can i record the midi AND vocals.
What I want and need is sooooooo simple to offer as a function, yet totally ruinous to my creative flow if it's not possible. (I used to do this easily on the far inferior
Cubase VST 5.1, OS 9)
Is there a way to record enable an audio track, so that,
until I specifically disable the record function, it's
ALWAYS ready to record the second I hit the record button?
Even after I've been hitting the down arrow to audition
various midi channels?
MacPro 3ghz, 8 gig RAM, 3 raptor drives Mac OS X (10.4.10) Logic 7.2.3, Kontakt 2 soft-sampler, RME 400

I tried to build screensets like you suggested. If I could
get this to work, I think it would be a great solution, but
I'm having serious problems.
I opened a separate mixer, with just the single vocal/audio
track showing.
Then I opened the main mixer, which has all the faders.
If I record-enable a midi track, and then hit the record-enable button on the audio track, the midi track becomes un-enabled. Incredibly frustrating.
The only way I've been able to do it has been to record-enable the vocal track, and then start recording.
Only if Logic is actually recording, can i then record-enable the midi track without deactivating the audio
track.
A big problem is, that when i click to record enable the
vocal track, the arrange window jumps all the way up to the
top, where the audio track is. THen i'm forced to travel
down, to re-find the midi track.
You mentioned in your post that the mixer needs to be
"unlinked". HOw is this done? Will it be possible for
me to click on the record-enable button on the mixer's audio track without the arrange window jumping to that track?

HT5287 If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?

If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
Or am I missing the bigger picture?

As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

dont know what to do

How to move multi select rows(records)from one datagrid to another datagrid completelly in flex4

hi friends,
I am doing mxml flex 4 wep application i am using 2 forms, each form i am using datagrid,i am struck in this place,
my proplem is, in first form i am having a grid with 10rows and columns,i am having 10 records and one move button. Next form also having a datagrid,
need:
IF i am doing multi select(2records) from the first datagrid and click move button means that records will show in the second datagrid and will also delete
from the first data grid again it wont show the records in same datagrid.
how to do this?
any useful suggession or snippet code.
thanks in advance,
Cheers,
B.venkatesan.

One solution could be:
Source to data grid is an Array collection
1.> In first data grid extraxct the rows using, grid.selecteditem
2.>Add it to the arraycollection attached to next grid, use arraycollection addItemat api if rows needed to ve added at particular index
3.>Use removeitemat api to remove the items from arraycollection attached to first datagrid
4.>call invalidate on bothe of the datagrids

Move audio to original record position

Similar Messages

Maybe you are looking for