Move base-ap license to another WLC?

Hi
I would like to move the base license from a Cisco air-ct5508-50-k9 to a new air-ct5508-12-k9.
And then move the air-ct5508-12-k9 to the air-ct5508-50-k9. Baically swap them around.
The reason I need to do this is that it will be very hard to move the units physically so just moving the base license would make life much easier.
Does anyone know if this is possible?
Thanks!

Hi,
different devices have different serial numbers, and the license has  that serial number inside it."among other inventory items"
moving the license between WLC's is not possible.
you can open a TAC case stating your problem and someone from the licensing team will help you to sort that out.

Similar Messages

  • Move Terminal server licenses to another server

    We have one terminal server VM hosted in hyper v server. currently there is a problem with the hyper v server hdd and we might need to rebuild the whole server. We would like to setup a new terminal server on a new server. The existing terminal server is
    windows server 2003. After I fresh setup the Windows server 2003 VM in a new server, how do I move the terminal server license to a new server? FYI, we would like to decommission the old terminal server. But we would like to do it in parallel as there are
    many users are still accessing to the old terminal server.
    Thanks so much.
    Regards,
    Henry

    Hi Henry,
    First you need to gather your licensing paperwork, authorization number(s), license number(s), etc. for your existing licenses.  This step is critical.
    Next install RD Licensing on the replacement 2003 server, Activate it using Terminal Server Licensing (licmgr.exe), then install the TS CALs.  If you receive an error when installing the old TS CALs please contact the Clearinghouse and explain
    to them you need to install the TS CALs on a new server because the old one is being decommissioned.
    How to locate a telephone number for the Microsoft Clearinghouse
    http://support.microsoft.com/kb/291795
    Once you have confirmed that the old TS CALs are installed on the replacement 2003 TS then make sure your 2003 TS is set to the correct Licensing mode (to match the type of TS CALs) and you have Specified the name of the new RD Licensing server. 
    You do this in Terminal Services Configuration (tscc.msc) on the replacement terminal server.
    As an alternative you could install the existing TS CALs on a newer RD Licensing server such as Server 2008 R2, Server 2012, etc.  You still will need to have the authorization number(s), license number(s), etc. for the existing 2003 TS CALs.
    How to move Terminal Services CALs from one license server to another in Windows 2000, Windows Server 2003 and Windows Server 2008
    http://support.microsoft.com/kb/953918
    -TP

  • How can I transfer a rented movie from one Ipad to another Ipad?

    I rented a movie on Itunes from a PC, and transferred it to an Ipad. I now would like to transfer it to another Ipad. Does anyone know how to do this? B

    Hi Technician7,
    It is true that you can "return" app licenses to Apple Configurator and redistribute that license to another iPad. The key is that both iPads must be "Supervised" in order to return the app license. See this from Apple:
    Removing apps from devices
    If you use Apple Configurator to remove a redeemed VPP app from a supervised device, Apple Configurator marks the corresponding redemption code as available. It can be reassigned to a different device supervised by this copy of Apple Configurator for this Mac only. It is not available for redemption by other Macs or iOS devices.
    If you unsupervise a supervised device, all apps will be removed from the device and the redemption codes used to install those apps will be marked available for reassignment. If you simply remove a device record from Apple Configurator, the redemption codes for any apps on that device will not be available for reassignment.
    I hope this answers your question!
    ~Joe

  • How can I transfer Adobe Creative Cloud license to another Adobe ID?

    How can I transfer Adobe Creative Cloud license to another Adobe ID?
    I need to transfer a new Adobe Cloud license from our main Adobe ID to another Adobe ID we created as they need to be managed separatly.
    Thanks for your help
    Gadi

    Following up, David answered this question via PM:
    "This kind of process wouldn't apply to Creative Cloud because ownership works differently.  I was looking here http://www.adobe.com/misc/terms.html in the 6. Use of Service and Materials section and noted it does reference the service as being non-transferable."
    So with Creative Cloud for Individuals the memberships can't be transferred – but (per this related thread) you can easily move memberships around between users with Creative Cloud for Teams instead:
    http://forums.adobe.com/thread/1315010

  • How to move my iTunes library to another laptop?

    How to move my iTunes library to another laptop?
    I used an external drive for my library so far and I just want to use this drive to organize my iTunes library on my Laptop.

    See this migrate iTunes library post.
    tt2

  • HT1688 Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it

    Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out

    Hi Elaine
    Here si what I do:
    Since I tend to message with teh same people I leave the messages available to me.  If you are in one conversation with "Karen"  and want to message with "Kathy" tap the message back arrow and select Kathy.
    As always just be careful to rememeber who you are messaging to!

  • How do I move a back up to another external drive and how does the Mac Book then find the new back up?

    how do I move a back up to another external drive and how does the Mac Book then find the new back up?
    I currently have the back up on a Time Capsule, I want to move it from the Time Capsule to another external hard drive.

    Did you read the link to the Pondidni website?  You will have to select the Time Machine HDD for the new MBP and the old one in System Preferences>Time Machine:
    Ciao.

  • Images I move from one folder into another are disappearing, at first it was occurring immediately if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location.

    Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
    In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?

    Hi Kevin,
    I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
    You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
    Best

  • How do I move from one website to another using Safari, while still allowing Pandora to provide music in the background? It seems that when ever I open a new URL, I lose Pandora.

    How do I move from one website to another using Safari, while still allowing Pandora to provide music in the background? It seems that when ever I open a new URL, I lose Pandora.

    Try running Pandora in its own tab and leaving that tab open (Safari 7.1.5, OS 10.9.5).  I don't have Pandora to try this, but it works for me otherwise.
    Good luck
    srb

  • Can i move my itunes library to another account on the same computer

    can i move my itunes library to another account on the same computer

    This might help:
    iTunes: How to share music between different accounts on a single computer
    -Kylene

  • How can I move my iphoto Library to another hard drive?

    I would like to move my iphoto library to another drive. I've already copied it to the other drive, do I now just delete it from the internal drive? If so how does iphoto know where to find the photos?

    doug4747
    1. Quit iPhoto
    2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • How to  move a page file to another directory ?

    Hi,
    What I did to try to move a page to another directory is:
    1. copy the page file to another directory /public_html/mydirectory.
    2. modify the nevigation-rule in the faces-config.xml file so that the nevigation-rule
    point to the file in the new directory.
    But when run the page, there is an FacesException: Cannt instantiate backing_bean.
    How to move a page file to another directory?
    Thanks
    Stephen

    besides moving the file to the new directory, i'd advise you to find the name of your page in every file of your application (ultraedit does this very well) and append the directory wherever it appears otherwise you'd probably miss a reference and have a problem like you have.

  • Why the menu to move from one page to another is not seen when the page is online?

    On my web, I have different pages like 'Homepage' or 'Contact' but when I publish my web I can not see the menu.
    why the menu to move from one page to another is not seen when the page is online?
    Thank you,
    Roger.

    Where are you publishing and how are you uploading the files?

  • I tested Adobe CC then bought an educational license with another ID. Lightroom Mobile does not work anymore.

    I tested Adobe CC then bought an educational license with another ID. I cannot use Lightroom Mobile. Message "Evaluation version has expired is displayed" and information in Preferences showing the old ID, not the new one. Disappointing support from Adobe. How to get rid of the old information and solve the problem?

    Thanks but it did not work. Adobe (USA, not France) solved the problem. My subscription was not correctly entered in the database, it seems.

  • Can one apple base be connected to another apple base station with ethernet?

    Can one apple base be connected to another apple base station with ethernet?

    Yes, it would be called a roaming network.
    See the Roaming network here:
    http://support.apple.com/kb/HT4260

Maybe you are looking for

  • ARD 3 Will Not Install "The serial number is not valid"

    Hello, and thanks for reading. I am a new network admin in a silicon valley school district. I come from a Windows background and I am picking up the Mac pretty well. I was asked by the support team to install Apple Remote Desktop 3 on my MacBook Pro

  • How to See and Change the Source Code of Spawned Concurrent Program.

    Hello Team, There is one requirement in which we have to add some condition in the Concurrent Program.But the Type of that concurrent Program is ,"Spawned ". Please suggest me , how can i check the Source code for this type of Concurrent Program and

  • Pages .docx crash

    Hi, I searched old versions of this question and things didn't help.  A .docx file crashes pages when I try to open it.  I have version 5.2.  All updates seem to be installed. I reset computer, tried opening the .docx from pages directly, held down s

  • The use of transaction VOFM

    Hi all, The above transaction is used to created (among other things) to use ABAP code to manipulate the values on a condition record. The calculation routine no. is attached to the condition and the code is executed. So far so good... My question is

  • Color of SOLID layer

    Can we change color of our SOLID LAYER after made them? Without any FX tools? I made a black solid layer but then I want to change color of it. How to do that? There is no any properities of that layer or something like that. Even when I click 2x on