Move clips from timeline to event sub folder?
Aloha,
Is there a way to move clips in the timeline that I have cleaned into a sub folder in an event library?
I come from a non FCP background and still trying to wrap my mind/workflow around the FCP formula. Generally I clean clips and drop "some" into a "to be used later" folder.
Example - While on location I might shoot some location shots while im waiting around. The locations shots will use in the last 3 mintues of a 25 minute finished project. When I get to post I edit and clean all clips in the order they are received. When I find the location clips I simply move them to a folder labled "to be used later". When I get to the section of the project/timeline were the clips are needed I drag them or the entire folder into the timeline.
I see how to make a folder inside an event but I am not able to drag a clips from the timeline to this created folder. I have tryied to hold down Shift, CMD, OPT, CTRL and have no sucess.
Thanks you for your time and help.
Frederick
Marbelle
Aloha Fox,
Thanks for taking the time to answer my questions. I feel you really understood my concern and gave me some good viable options.
There is a lot for me to learn and unlearn. I have been editing for over 16 years and most of that time I was using Edius. This is big paradigm shift coming to the Mac and FCPX.
The idea for me is to edit the video and move the "to be used later clips" into a bin/folder instead of moving them to the location in the timeline were they will be used at that very moment. Its just a preference, I know plenty folks would just move the clip to the location. Edit software is just a tool I have to decide if FCPX is the right tool for me.
Thank you again Fox for your time and understanding of my question.
Be blessed,
Frederick
Marbelle
Similar Messages
-
How do I move clips from one Event to another?
How do I move clips from one Event to another?
As soon as I got the new iMovie, I started importing clips and making video's. Unfortunately, I hadn't fully understood the Events feature, so all of my clips are in a single "New Event" Event. I have now created several other Events and named them properly and would like to sort all of my clips into their proper "Event" folders. How do you do that?Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help! -
Dragging movie clip from Event pane to Project pane
When I drag a movie clip from Event to Project the top part of the clip is cut off. On body pictures I am losing people's heads! The movie clips play perfectly in the Event panel, so I know they were imported correctly.
There are two things to look at.
First, what is the aspect ratio of your project, and is it the same as your camera is shooting?
If your camera is standard (4:3), set your project to 4:3. If your camera is wide-screen (16:9), set your project to 16:9. You can do this in FILE/PROJECT PROPERTIES.
Second, if your project contains a mix of 16:9 and 4:3, that is OK. You just pick the aspect ratio that you prefer. Then on each clip, go into the Rotate, Crop, Ken Burns Tool and select FIT or CROP.
FIT will letterbox (black bars). CROP will cut off the top and bottom. You can decide which you prefer. -
Importing movie clips from internet
I am trying to import some movie clips from the internet. Any suggestions? I tried saving on MAC HD and adding to iSquint, but when I import into iMovie, there isn't anything there. I have the same problem when I try to import clips from a movie (not video, a real movie) I have saved in iTunes. Any suggestions there?
Try this great free, open source software.
You can get it from the site or from Apple downloads.
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
Run MPEG Streaqmclip.
Click File > Open URL.
Copy/Paste the URL of the video into the box.
Click on File > Export to QuickTime.
Use 'Apple Intermediate Codec'.
Convert the movie and save to a folder on your desktop.
Open iMovie and click File > Import Movies...
Navigate to the folder.
Create a new event, name it and import. -
How do i move clips from home video to roll?
how do i move clips from home video to roll?
Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help! -
Loading Movie Clip from a button
Hi,
How do I load a movie clip from a button? So far on my button
(b1), I have this AS: and I want the button to load the movie clip
"char1." My button already has some AS:
b2.onRollOver = function() {
_root.captionFN(true, "Hi!", this);
this.onRollOut = function() {
captionFN(false);
How would I go about adding more script to load a movie clip
to my button b2?
ThanksHey - Unfortunately I'm going to be in meetings for most of
the day, so
it'll take me a while before I can go through this in any
detail. One thing
that struck me though is that your two functions (captionFN
and
hoverCaption) are in the main1_mc not on the main timeline.
Then the
buttons are calling _root.captionFN(); which refers to the
main timeline.
I would expect that they should be calling
_root.main1_mc.captionFN(),
because that is the path to where the function is. Does that
make any
sense?
One thing that I do when I'm writing code is to always keep
all functions on
the main timeline. That way you are sure that they are being
registered
(i.e. if you call a function before the playhead reaches
where that function
is written, the function won't work. If the function is in
the first frame
of the main timeline, you know that the playhead has reached
it). What you
might want to do is to move all your functions to the very
first frame of
your movie. Then you can call them with the path:
_root.myFunction() and
you are sure that they will be found.
Maybe give that a try and let me know if it helps. In the
meantime, I'll
try to go through your code, but like I said, today's a bit
of a gong show
for me.
Sorry - I don't mean to just sluff you off or anything.
Cheers,
Brock
"respondplease" <[email protected]> wrote in
message
news:[email protected]...
> Hi Brock,
>
> Thanks again, your sample file really helps but I'm
still having problems.
> What it boils down to is that my buttons don't fully
function properly. It
> works correctly sometimes, but not consistently enough.
So if I fast
> forward
> too much or rewind and then FF, the buttons aren't
either isn't clickable
> or
> the hover text and caption box doesn't show up, etc.
This usually happens
> when
> I press FF too many times or too fast. But regardless of
how many times I
> press
> FF I would like my buttons to work
>
> Your sample file is very useful but unlike mine I have
perhaps too many
> MC's
> w/in MC's, etc. I will try to clarify my setup in hopes
of finding a
> (better)
> solution to my problems. My main timeline has my "prev",
"next", and
> "pause"
> buttons which also has the actionscript for my NEXT
BUTTON, PREV BUTTONS.
> And
> now I've added your SHOW BUTTONs function as well. I've
minorly modified
> your
> showButtons function adding a couple of more lines and
actually deleting
> the
> _root because I found that it doesn't work sometimes.
Anyhoo, here it my
> entire
> code in one frame on my main timeline:
>
> // ===== NEXT BUTTON ===== \\
> next.onPress = function() {
> _root.screen.showButtons();
> _root.createEmptyMovieClip("controller_mc", 1);
> controller_mc.onEnterFrame = function() {
> _root.screen.gotoAndPlay(_root.screen._currentframe+10);
> if
(_root.screen._currentframe+10>_root.screen._totalframes) {
> _root.screen.gotoAndStop(_root.screen._totalframes);
> }
> };
> };
> next.onRelease = function() {
> controller_mc.removeMovieClip();
> _root.screen.showButtons();
> };
> next.onReleaseOutside = function() {
> controller_mc.removeMovieClip();
> _root.screen.showButtons();
> };
>
> // ===== REWIND BUTTON ===== \\
> prev.onPress = function() {
> _root.createEmptyMovieClip("controller_mc", 1);
> controller_mc.onEnterFrame = function() {
> _root.screen.gotoAndStop(_root.screen._currentframe-10);
> if (_root.screen._currentframe-10<1) {
> _root.gotoAndStop("screen");
> }
> };
> };
> prev.onRelease = function() {
> controller_mc.removeMovieClip();
> };
> prev.onReleaseOutside = function() {
> controller_mc.removeMovieClip();
> };
> // ===== SHOW BUTTONS ===== \\
> function showButtons() {
> for (i=1; i<=6; i++) {
> _root["b"+i]._visible = true;
> _root["char"+i].removeMovieClip();
> chars._visible = true;
> cap.desc._visible = true;
> cap._visible = true;
> }
> }
> Still from my main timeline, my main1_mc is called from
the frame labeled
> "screen." My main1_mc has the b1 - b6 buttons which has
the HOVER CAPTIONS
> and
> HIDE BUTTONS FUNCTION coding. And each button calls each
movie clip ie.
> char1_mc, char2_mc, etc. Here's all my code on one frame
(in my main1_mc):
> // ===== HOVER CAPTIONS =====
> b1.onRollOver = function() {
> _root.captionFN(true, "pick me!", this);
> //display the function (true) or to hide the function
(false)
> this.onRollOut = function() {
> captionFN(false);
> };
> this.onRelease = function() {
> hideButtons();
> _root.attachMovie("char1_mc", "char1",
_root.getNextHighestDepth(),
> {_x:595,
> _y:345}); //this attaches movie to the _root timeline,
and renames it to
> "char1".
>
> _root.char1.swapDepths(_root.cursor_mc);
> //swaps the depth that the cursor is on and the new
movieClip is on. So
> the
> cursor will stay on top.
> };
> };
> b2.onRollOver = function() {
> _root.captionFN(true, "Hi!", this);
> this.onRollOut = function() {
> captionFN(false);
> };
> this.onRelease = function() {
> hideButtons();
> _root.attachMovie("char2_mc", "char2",
_root.getNextHighestDepth(),
> {_x:605,
> _y:345});
> };
> };
> b3.onRollOver = function() {
> _root.captionFN(true, "Get Jac'd Up!", this);
> this.onRollOut = function() {
> captionFN(false);
> };
> this.onRelease = function() {
> hideButtons();
> _root.attachMovie("char3_mc", "char3",
_root.getNextHighestDepth(),
> {_x:605,
> _y:345});
> };
> };
> b4.onRollOver = function() {
> _root.captionFN(true, "Boo!", this);
> this.onRollOut = function() {
> captionFN(false);
> };
> this.onRelease = function() {
> hideButtons();
> _root.attachMovie("char4_mc", "char4",
_root.getNextHighestDepth(),
> {_x:605,
> _y:345});
> };
> };
> b5.onRollOver = function() {
> _root.captionFN(true, "I'll be your guide", this);
> this.onRollOut = function() {
> captionFN(false);
> };
> this.onRelease = function() {
> hideButtons();
> _root.attachMovie("char5_mc", "char5",
_root.getNextHighestDepth(),
> {_x:605,
> _y:345});
> };
> };
> b6.onRollOver = function() {
> _root.captionFN(true, "Welcome!", this);
> this.onRollOut = function() {
> captionFN(false);
> };
> this.onRelease = function() {
> hideButtons();
> _root.attachMovie("char6_mc", "char6",
_root.getNextHighestDepth(),
> {_x:605,
> _y:345});
> };
> };
> _root.captionFN = function(showCaption, captionText,
bName) {
> if (showCaption) {
> createEmptyMovieClip("hoverCaption",
this.getNextHighestDepth());
> cap.desc.text = captionText;
> // cap._width = 7*cap.desc.text.length;
> cap._alpha = 75;
> if ((bName._width+bName._x+cap._width)>Stage.width) {
> xo = -2-cap._width;
> yo = -17;
> } else {
> xo = 2;
> yo = -17;
> }
> hoverCaption.onEnterFrame = function() {
> cap._x = _xmouse+xo;
> cap._y = _ymouse+yo;
> cap._visible = true;
> };
> } else {
> delete hoverCaption.onEnterFrame;
> cap._visible = false;
> }
> };
> // ===== END OF HOVER CAPTION ===== \\
>
> // ===== HIDE BUTTONS FUNCTION ===== \\
> function hideButtons() {
> for (i=1; i<=6; i++) {
> this["b"+i]._visible = false;
> }
> chars._visible = false;
> cap.desc._visible = false;
> }
> Sorry for copying and pasting all my code - I know it
must be annoying,
> but I
> can't seem to find what's wrong. Again, ANY help would
be greatly
> appreciated.
> Thanks for your patience. Your talent is very much
appreciated and I'm
> very
> grateful for all your help.
>
> Kindest regards
> -
Accessing movie clip from flash swf file
I have the situation where in flash i created a simple
animated movie clip with few stop() commands on timeline. Movie
clip consists of simple animatio played on roll over and on roll
out which is controlled using actionscript. I loaded movie clip
into flash using [embed] tag but actionscript code is stripped,
there is no stop() action so movie clip loops continously. I guess
that's normal behaviour for embedded flash swf files but i would
like to know is there a way to still achieve that? Can i load swf
some other way with its actionscript and then control movie clip
from flex?You need the FLA's to open in Flash.
You could download the free trial of a flash decompiler
(www.sothink.com). The free trial won't give you actionscript, but
it will give you all of the art in the swf. -
How do I transfer movie clips from iPhoto to iPad?
How do I transfer movie clips from iphoto on my iMac, to my iPad?
You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
Cheers, Tom -
How do I stop a movie clip from looping
I am using Action Script 3 and the 'stop()' function is not working to stop my movie clips from looping continuously.
I have added the 'stop()' function to the last frame on the timeline of each movie clip.
I originally built the .fla file in Flash CS6 using Action Script 2 where it was working with no problems (I have since upgraded and don't have access to CS6 anymore).
I have all the separate movie clips positioned on Frame 1 of my main stage with the following script to start them playing:
Cigarette_Reveal.play();
KickTheHabit.play();
BallMove.play();
BallFlip.play();
Offer.play();
I want each of these movie clips to stop playing after one animation sequence is complete.
Please help!Turn on strict mode in your publish settings. This will allow you to see the compiler errors that are preventing the actionscript in your fla from compiling correctly.
-
My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?
What kind of Mac to you have? This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire. If your mac *does* have firewire, get a camcorder firewire cable and try again.
ETA: Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go. You will probably need a cord that goes from FW800 to your camcorder. -
Trouble Copying and pasting a movie clip from another flash scene
Hello,
I have been trying to copy a movie clip from the library of one flash and paste it into the library of another. But when I do this, it always gives me, "One or more library items already exist in the document.
I have tried finding and renaming those items, renaming the existing movie clip, and even changing it into a graphic instead. Still it always replaces these certain movie clips in my main flash file.
I even tried the following:
Creating a new movie clip in the new file. Then going into the movie clip of the other file I wish to copy over, and trying to copy its frames and put it into the new movie clip i created in the main file. Even then, it says I'm replacing library items!
Can someone help me?
ThanksThe easiest way to be sure you are renaming everything is to probably to copy the movieclip into a new empty file's library and then rename each symbol in there. Unless I am missing something, when you do that, each isolatable symbol inside that movieclip will appear as a separate symbol in the library, making it easier to be sure you have renamed them all.
-
Drag & drop audio clip from timeline to project window ?
i no longer can drag a clip from timeline to the project window & then breakout the clip to mono by selecting clip - audio options- breakout to mono - now when i drop an audio clip from timeline into the project window it does not show up anywhere in the project window - did an update get rid of this function ? it was much better than having to go back to the unedited original source & start from scratch ...
thanx for your time Jim - i understand that would be the preferred method but that was a quick fix until recently i have noticed that i can no longer do it by just grabbing the edited clip & drop it in project window so that i can modify just that portion of the original files properties - it still functions that way on a friends machine - was just kinda weird that i can't get it to work that way any more …
-
I am trying to move across & view my home movie clips from my old PC to my new Mac but I am unsure what software I need to view them. They are from a Canon video camera originally. Please advise how this is done!
Do they have a file extension?
How about anything on the camera which might indicate what it is, like AVCHD? -
Preventing a movie clip from resizing
Hello:
How can I prevent a movie clip from resizing while continuing
to allow the main movie to resize.
If this is impossible to do, knowing that would also be
helpful information.
Thank you in advance for any assistance offered,
MyMorgaineMake an Album of the Photos and Videos and put them in the order you want. Then make a slideshow of that album.
Regards
TD -
Import home movie clips from DVD
Hi all -
I've been trying to wrap my non-computer brain around the process of importing a previously burned home movie clip from DVD back into iMovie so I can add to it. (I messed up the first burn, but because of limited space, I deleted the original clip.)
I'd be happy to get it back to tape on my camcorder if that is the only way to do it, but I fear losing quality.
I've downloaded Mac the Ripper and Streamclip, but I don't want to pay extra money for any software (I'm a poor, starving student mom).
Can anyone help out?
Christine.Your burned DVD uses MPEG-2 file format. You'll need more software:
MPEG Streamclip (free).
Apple's MPEG-2 PLayback Component ($20).
Use Streamclip to open the DVD contents and export to DV Stream (huge file). Use the .dv file in iMovie.
Maybe you are looking for
-
CMD=Ping&log query is taking long time-taken when checked in IIS logs.... Exchange 2010 SP3..
Query regarding the ActiveSync and parameter time-taken from ActiveSync IIS logs. Here what I see for from the logs. [email protected] 45.101.90.185 Apple-iPad2C3/1202.410 200 0 0 1501129 443 [email protected] 45.101.90.185 Apple-iPad2C3/1202.410 200
-
How do I get my contacts back into my personal folder
After syncing my Outlook 2010 Calendar and Contacts with the iCloud I have contacts only in icloud contacts and not in my personal contacts. How can I restore my Contacts to my personal contacts folder?
-
How to display existing View as content in TABSTRIP tab?
Is it possible to display existing View as tab content in TabStrip tab? If so how can we do this? Thanks in advance!
-
R12.1.1 Item Master Organization Calender field is disabled
HI, While creating Item Master Organization in R12.1.1, calender field is disabled. I have defined & built workday calender but field is disabled while creating Inventory Org. I couldn't find any reason on metalink as well. Can any one guide me about
-
How do I restore the camera function to my Iphone 4? I accidentally deleted the icon from the desktop.