Move Command Groups in own namespace

Hello all,
I created a new folder in portal content for objects which I should copy (so these objects cannot overwrite in upgrades). My problem is now that I want to move my duplicated command groups into this namespace and I find no way to do this...
I know that must be very simple but I do not get the hang of it...
Kind regards and thank you very much for suggestions.
Susa

Hi Susann,
there are two different sights for "own Content".
1. U can create an own folder in the PCD where to store own iviews, worksets, sites, ect.
2. For e.g. implementing Collaboration u have to copy command groups to your own namespace. But this doesn´t mean to copy the to the created folder. (Thats not possible). It´s meant like that: Create a ducplicate of the command group and name the duplicate command group with your "own namespace".
helpful?
Greetingz
Lars

Similar Messages

  • How to copy command group

    hi all,
             can anyone please tell me how to copy a command group into our namespace
    Regards,
    Samuel

    hi
    You need to create a advance copy of the command group  navigate to  system administration>systemconfiguration>Knowledgemanagement>content Management>user interface>Commands> ui command Group-->navigate to command and duplicate it or advance copy.hope this helps you.please do not forget to give points
    with regards
    subrato kundu

  • How do I move a group of tabs before closing a window?

    I recently lost all my custom settings on Firefox after an aggressive tech support person "cleaned" my browser settings. When this happened, I lost the ability to move my open tabs to a new group before closing the window they were in.
    Previously, when I had multiple windows open, and I initiated an "Exit" or "Close" command on one of the open windows, 2 things happened:
    (1) First I received a warning message asking me if I wanted to close the window
    (2) Then I received a second warning message asking me if I wanted to move my tabs before closing the window.
    Now, I only receive the 1st message, and I am no longer offered the option of moving my tabs to a new window before closing the current window.
    I've tested this both with and without the Tabs Group Manager which I was using prior to the time my browser was "cleaned", and I still have not found a way to restore this missing feature.
    Unfortunately, I don't know if this feature/option is:
    -- provided as a default in Firefox
    -- a customizable feature in Firefox, or
    -- a feature in a Firefox add-on.
    Can anyone tell me where/how to restore this option to move a group of tabs before closing a window?
    Thanks,
    Metta

    Thank you, guigs2, for your feedback, and my apologies for the confusion. After rereading my question, I realize I made a couple of typos in my original help request which cannot now be corrected. Specifically, the 2nd sentence in the first paragraph should have read:
    "I lost the ability to move GROUPS of open tabs to a new WINDOW before closing the window they were in."
    This means that, as far as I can tell, neither of your plugin recommendations applies:
    -- Apparently, Tab Mix Plus only applies to manipulating tabs WITHIN the existing window and, unless I am missing something, I did not see any reference to the option I'm looking for -- specifically, an automatic prompt offering to move groups of tabs to a new window before closing the existing window.
    -- Unfortunately, the other plugin you mentioned (Tag Cloud) appears to be non-functional in the current version of Firefox, based on the most recent user reviews.
    In light of this, I will consider the possibility of resubmitting my question with the typos corrected -- and, in the meantime, if there is any additional feedback that you (or anyone else) can offer, I would be most grateful!

  • Cursor moves on it's own on my 24" imac

    My cursor moves on it's own. I do not have a trackpad, or Timbuktu (not sure what that is?) I have used apple support on this once all ready. They had me do a restart from the system disk, run Disk Utility, unplug everything wait and then replug, zap the p-ram, dump a preference panel. But none of it fixed the problem. The cursor just shoots off to the side or the top or bottom depending on what it's closer to. I bought a new mouse, and still had the same problem, so I returned it. I upgraded to the latest OS, still have the problem. The problem continues when I'm working in Photoshop and Illustrator, which is really frustrating because it suddenly streaks across the page while I'm painting (in PS) or if I'm working an anchor point in Illustrator it suddenly pulls it off the page.
    Can anybody help me fix this once and for all?
    I really appreciate any and all suggestions.

    Restart the computer, as long as you're at it do a SMC reset:
    SMC RESET
    • Shut down the computer.
    • Unplug the computer's power cord and all peripherals.
    • Press and hold the power button for 5 seconds.
    • Release the power button.
    • Attach the computers power cable.
    • Press the power button to turn on the computer.
    PRAM RESET
    • Shut down the computer.
    • Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    • Turn on the computer.
    • Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Roger

  • How do I move a group of photos from iPhoto to a thumb drive?

    How do I move a group of photos from iPhoto to a thumb drive?

    1. Select photos with Command key and drag them to Desktop.
    2. Copy them to the external disk

  • Duplicate Symbol Error when using my own namespace

    Hi.
    When making a new project -> Command line util -> c++ tool, and then adding a new c++ file (includes the .h) to the project, I try making my own namespace like this:
    //ns.h
    #ifndef _TMSDF
    #define _TMSDF
    namespace testns
    int i;
    void somefunc();
    int retInt();
    #endif _TMSDF
    //ns.cpp
    #include "ns.h"
    namespace testns
    void somefunc()
    i = 10;
    int retInt()
    return i;
    and then the main, using the namespace:
    //main.cpp
    #include "ns.h"
    #include <iostream>
    using namespace testns;
    int main()
    somefunc();
    std::cout << "result: " << retInt() << std::endl;
    return 0;
    When hitting the "Build and go" the build results shows the following error:
    duplicate symbol testns::i in [path]/Debug/testname.build/Objects-normal/i386/ns0 and [path]/Debug/testname.build/Objects-normal/i386/main.o
    Tried searching and reading numerous posts, but can't seem to find the answer for this error. Any hints?
    Xcode vers.: 3.1.2
    Project properties:
    Arch.: 32/64-bit universal
    Base SDK: Mac OS X 10.5
    C++ compiler version: GCC 4.0
    Along with default project settings
    TIA.
    Christian

    chrcphdkny wrote:
    But I find it strange that my C++ books (by Savitch) doesn't mention this at all.
    Never heard of Savitch. Stroustrup knows a thing or two.
    I would assume that declarations go in the header file and implementations and instantiating variables is done in the cpp file.
    Not necessarily. With templates, everything goes in the headers.

  • The right-click "move to group" menu item has disappeared, how can I get it back?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/813094?]</blockquote><br>
    This menu option has been there since I started using the beta. It disappeared during one of the beta revisions, but was back for RC1. In fact, I just used it the other day, but now it is not there. What is my problem?

    OK,
    I solved my own problem. For some reason, if I enable the menu bar, the option comes back, and when I disable it it seems to stay ..... for now. Bug maybe?
    Note,
    I even installed the Menu Editor 1.2.7 Addon (which showed the "Move to Group" option enabled, and that still did not solve the problem.

  • Command Groups issue

    Hi all,
    I have the following problem with Command Groups.
    When I create a new Command Group or duplicatie an existing Command group I the iView I can see only the Default Command Group instead of the commands which I have assign. Even when I create a command group without any commands or when I duplicate the AppEmpty command group I see the default commands. When I change the commands of an existing command group, there is no change. When I use the existing command group there is no problem, but when I duplicate it, there are the default commands instead of the commands of the duplicated command group.
    Another question. By searching, the option Similar Documents doesn't use the same collection renderer as the SearchResultLayoutSet. Can you tell me, which is the Collection Renderer of the Similar Documents.
    Thanks in advance for any help.
    Best regards,
    Zlatina

    Hi
    you are doing perfectly fine what you need to do is duplicate the collection renderer and attach the commandgroup and then duplicate the layoutset and attach this collection renderer to it and apply this layoutset to iview by chaging the name of it in default layout.Hope this helps.allocate points just go through this soln i have posted earlier
    1.Identify the iviews which are used for xml forms
    here NEWS AUTHORING AND NEWS BROWSING.
    2.IN THIS REGARD U HAVE DISPLAYED LINKS OF REPOSITORY AT THE TOP OF AUTHORING IVIEWS WHICH CAN BE MASKED BY EDITING RENDERCONFIG.PROPERTIES FILE STORED AT ETC -XML FORMS FOLDER YOU CAN DIPLAY THE PROJECT IN THE IVIEW THAT U HAVE CREATED.
    3.GENERALLY LINKS WHICH ARE DISPLAYED AT THE BOTTOM OF THE IVIEW ARE CONTROLLED BY COMMAND GROUPS BY NAVIGATING
    You are here:
    Configuration
    Content Management
    User Interface
    Commands
    SELECT NEWS DISPLAY GROUP FOR NEWS BROWSER AND NEWS GROUP FOR NEWS AUTHORING CREATE DUPLICATE OF IT AND EDIT THE TAB COMMAND LIST FOR THE LINKS TO BE DISPLAYED AND NAME IT AS YOUR OWN COMMAND GROUP.
    4> NOW NAVIGATE TO
    Configuration
    Content Management
    User Interface
    Settings
    COLLECTION RENDERRER SETTINGS
    COLLECTION GRID RENDERRER SETTINGS
    DUPLICATE THE SETTINGS FOR NEWS COLLECTION RENDERRER AND NEWS DISPLAY COLLECTION RENDERRER AND ADD THE COMMAND GROUP U HAVE CREATED IN PREVIOUS STEP TO MASS COMMAND GROUP AND COLLECTION COMMAND GROUP PROPERTY FIELD
    5>U NOW HAVE TO CREATE THE LAYOUT THAT MEANS U ARE GOING TO APPLY A LAYOUT WHICH IS NOT DEFAULT BY NAVIGATING TO
    You are here:
    Configuration
    Content Management
    User Interface
    Settings
    LAYOUTSET
    DUPLICATE THE LAYOUT FROM THE AVAILABLE ONES FOR NEWS BROWSER AND NEWS EXPLORER NAME IT AND STORE IT IN A FILE
    NOW CHECK THE BOX SHOWING UR COLLECTION RENDERER IN PROPERTY WINDOW AND UNCHECK THE DEFAULT ONE SAVE IT
    5> GET IN PORTAL CONTENT DIRECTORY AND IN PROPERTY WINDOW EDIT THE LAYOUTSET OF NEWS AUTHORING AND NEWS BROWSER IVIEW ADD THE LAYOUTSET U HAVE CREATED JUST TYPE THE NAME OF IT . SAVE AND HAVE PREVIEW.
    <b>With regards
    subrato kundu
    IBM
    SAP Enterprise Portal technology consultant</b>

  • IMAP MOVE command not being used? (server supports it)

    I created an IMAP log, to see whether TB was using the IMAP "MOVE" extension. Despite the fact that my IMAP server does appear to support it, I can't see any MOVE commands in my protocol log. The only times the string "MOVE" appears in log is the CAPABILITY response from the server. FWIW, here is the capability string:
    [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE BINARY MOVE NAMESPACE QUOTA]
    Note that I moved a message BETWEEN mailboxes, if that makes a difference. (if it only works intra-mailbox, then I can't make use of it)
    What exactly should I see in my protocol log, if TB is using the MOVE command?
    Environmemt: TB 31.0, Windows 8.1-64, Dovecot IMAP server

    Thanks, but before I do that, I don't mind asking for help elsewhere, perhaps on the Dovecot list or something. I notice that an INTRA-mailbox move does go significantly faster, and I see a "moved messages" status message down the bottom, too. (haven't checked the log yet, but I strongly suspect it is using the IMAP MOVE extension for this operation)
    Postbox behaves the same as Thunderbird - inter-mailbox moves are very slow - it is obvious that it is manually moving the messages. (and likewise, intra-mb moves are rapid)
    I kind of suspect that it's just not going to work between mailboxes, despite what the RFC says. If I find out anything, or file a bug report, I will indeed report back.

  • Could not complete the Move command because the result would be too big

    trying to move a picture and I get "could not complete the Move command because the result would be too big".  It is the only layer.

    This is for version 13.1
    I am getting this error as well.  I am trying to combine an ~19,000x3600pixel photo with an ~10,000x3600 pixel photo.  I created a blank file 30,000x4000pixel to put the 2 photos together.  I paste the larger photo into the blank file and position it to the vert center and horiz left of the blank file.  I then paste the smaller picture into the new file.  It goes in at the center in its own layer as expected.  As soon as I try to move it left or right I get the above error message. I can move it ALL the way left and it will stay.
    Also if I just create the blank file and paste the larger file in it and move to the right or left by just a little (say with the cursor controls or mouse but move slightly) I get the error.  If I move all the way left it stays. If I move all the way right it gives an error BUT if I select undo move and redo move it goes to the right and stays.  I tried that with the small file but could not get it to stay right.
    all 3 are 72px/in

  • Move a group of keyframes?

    I want to multiple select a group of audio keyframes and move the whole group of them forward or back without moving the clip. How do I do this?
    I see that you can use the Range select tool to select a group of audio keyframes. How do you move a group of audio keyframes without moving the clip?

    I tried the command myself and in FCE 3.5 it works exactly as DM describes, that is, it does not work as described in the Help (and 3.5 Help has the same description quoted by DM).
    So it seems it's not possible to select just keyframes in FCE.
    Piero

  • Portal Favorites "Move" Command

    Hi, When a user is organizing their favorites and select option "Move" they get a dialog that presents the folders in the "Entry Points" Folder.  I'd like to override this move dialog so they only have visibility to their own favorites folder.
    Can anyone direct me how to override the "Move" layout set that is presented?
    Thanks!

    I understand I shouldn't change the system provided move object.  Can you tell me the best way to do add this new move command using best practice?  Below is my best guess.
    Copy command move to move_1 and change to desired layout
    Copy DetailsActionsGroup to DetailsActionsGroup_1 and replace move with move_1
    Copy DetailsGroup to DetailsGroup_1 and replace DetailsActionsGroup with DetailsActionsGroup_1
    Replace move with move_1 in DetailsGroup_1
    Copy desired layoutset to layoutset_1 and change "Commands for the details menu" to DetailsGroup_1
    Thanks again for your valuable help!

  • Cons hierarchy restructuring -- Move a group with its subgroups to another

    We need to restructure the consolidation hierarchy as per management decision.
    Need to move a consolidation group along with the sub groups and units under it to another group that is in parallel (at the same level in the hierarchy) with the group that needs to be moved.
    e.g. Cons Group CG10 (with parent unit CU11) is the top group and CG20, CG30 and CG40(with parent units CU21, CU31 and CU41 respectively) are under it and groupos CG41 and CG42 are under CG4.
    We now need to move group CG40 along with its units and sub groups under CG20. The parent unit CU41 is currently 100 % owned by CU11 and will need to be transferred to CU21.
    Please suggest the best way to handle this.
    Do we need to create a new group along with new sub groups under CG20??
    Or it's Ok to create just one new group for CG40 and move the subgroups CG41 and CG42 as they are.
    Please advice ASAP.

    You can't move a cons group within a fiscal year, so you may need to create a CG40b, CG41b, CG42b (i.e., new version of the groups).
    If it's the end of the year, it may be possible but probably not advisable to try and move the groups themselves, but I assume the system would complain.  I've never tried it myself, and don't know how the transfer would work if the old groups were gone.
    I would create CG41b, CG42b.  Set the divestiture date for the units in the CG4x groups, add the units and first consolidation dates to the CG4xb groups, set accounting techniques, etc.
    Create an organization change number with sender CG41 and receiving CG41b.  Ensure you have the prepration for consolidation group change tasks configured in your task hierarchy.  I've always had two tasks, one for 02/12 (before elims), and another for 22 (after elims but before CoI).
    In the additional financial data, create total transfer activity for the units in question, referencing the Org Change number created earlier.
    Execute the consolidation as early as possible during the close, even if it's just preliminary data, and have the business verify the postings seem reasonable. 
    Hope that helps,
    Chris

  • Move Protection Group from One DPM server to another DPM server

    Hi Mike,
    Can we move Protection Group from one DPM 2012 SP1 to another DPM 2012 R2 version? If yes then what is the steps to perform that. Also i am running DPM servers with co-located and non-colocated configuration. What would be best as per best practice? Because
    my 95% backup are SQL backups.

    Hi,
    There are no provisions in DPM to move protection groups or protected data sources to a new DPM server and maintain the recovery points.  The best you can do is to stop protection on DPM1 and retain the replica, then run the setdpmserver.exe on the
    protected server and point it the DPM2 server. On DPM2, run the attach-productionserver.ps1 script to establish agent communications, then make new protection groups and re-protect the same data sources.  After the retention goals are met, delete
    the replica from under inactive protection group on DPM1.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • "move" command doesn't work in case of files on network

    I setup a theWatchFolder fold on network as Watch Folder. This works like when the folder on network gets a file, I'm notified via email and the file should move from watch folder (which is on network) to theDestinationFolder (which is also on another network). I used "move" command for that but it copies the files from the theWatchFolder to theDestinationFolder but doesn't move. And there, script shows error "An item with the same name already exists in this location."
    global theWatchedFolder
    global DestinationFolder
    set theWatchedFolder to choose folder
    set theDestinationFolder to choose folder
    on idle
        tell application "Finder"
            set theDetectedItems to every item of theWatchedFolder
            repeat with aDetectedItem in theDetectedItems
                move aDetectedItem to the theDestinationFolder
            end repeat
        end tell
        if theDetectedItems ≠ {} then
            activate
            display dialog "Files for cutout were detected and moved to your " & theDestinationFolder
            tell application "Microsoft Outlook"
                set m to make new outgoing message with properties {subject:"Files For Cutout Received", content:"Hello there:
                Files for cutout received"}
                tell m
                    make new recipient with properties {email address:{name:"KK", address:"[email protected]"}}
                end tell
                send m
            end tell
        end if
        return 1
    end idle

    Hi H:
    Thanks for your help.
    I opted the Option 1 from your script. When a file arrives in Watch Folder, the script still copies to the destination folder (instead of move) and sends email successfully, and this task repeats continuously. The script is as follows:
    global theWatchedFolder
    global theDestinationFolder
    set theWatchedFolder to choose folder
    set theDestinationFolder to choose folder
    on idle
              tell application "Finder"
                        set theDetectedItems to every item of theWatchedFolder
                        repeat with aDetectedItem in theDetectedItems
                                  set a to aDetectedItem as alias
                                  set b to (move a to theDestinationFolder with replacing) as alias
                                  if a ≠ b then
                                            tell current application
                                                      do shell script "rm -rf " & POSIX path of theWatchedFolder
                                            end tell
                                  end if
                        end repeat
              end tell
              if theDetectedItems ≠ {} then
      activate
                        display dialog "Files for cutout were detected and moved to => " & theDestinationFolder
                        tell application "Microsoft Outlook"
                                  set m to make new outgoing message with properties {subject:"Files For Cutout Received", content:"Hello there: Files for cutout received"}
                                  tell m
      make new recipient with properties {email address:{name:"KK", address:"[email protected]"}}
                                  end tell
      --open m
                                  send m
                        end tell
              end if
              return 1
    end idle

Maybe you are looking for