Move costs from WBS to another

Dear Gurus,
I kindly ask you to tell me how can I move some costs (hour of personnel type of cost S43...) from a WBS on a project to a WBS on another project.
I know I can use KB21N: in that way I have to pull out costs from a WBS though the costs center and then do another movement in order to charge the costs on the WBS receiver always thourgh the cost center.
Is there a way to do it directly?
Thanks a lot!
Sara

S43.. is of type indirect activity allocation,cost element category 43, hence can be used only with reference to activity allocation. Please use any other cost element, be it primary or secondary.
Or else you could cancel the original activity allocation through KB67 and renter through KB21N. You may also want to try reposting of activity allocation posting through KB65.
For number range, go to transaction KANK and enter the controlling area. Then click on Change groups icon on top left. Click on binoculars and search for KAMV (Manual Cost Allocation) This is SAP standard and most likely you will find it.

Similar Messages

  • Tc kb11n to repost costs from wbs to another wbs

    I have some expenditures occured during year of 2010 to transfer to project XXX, then capitalized them.
    I have the order yyyy (assigned to wbs 9999) need to post to wbs 8888
    I tried to use tc KB11N:
    - scrn var: wbs element/order
    -input type: individual entry
    then I insert:
    -cost element
    - old account assigment (order and wbs)
    - new account assigmnet (same order and new wbs)
    but i have this warning:
    Assignment to project/network is not permitted for order yyyy
    (because the given statistical order is assigned to a project > I saw it in tc KO03)
    this means that I can't repost these expenditures?
    how can I fix it?
    I try to ignore the warning and I push enter. at this point I have this error:
    WBS element 888 (the new wbs) is not an account assignment element
    can anybody help me please?
    thanks
    V.

    S43.. is of type indirect activity allocation,cost element category 43, hence can be used only with reference to activity allocation. Please use any other cost element, be it primary or secondary.
    Or else you could cancel the original activity allocation through KB67 and renter through KB21N. You may also want to try reposting of activity allocation posting through KB65.
    For number range, go to transaction KANK and enter the controlling area. Then click on Change groups icon on top left. Click on binoculars and search for KAMV (Manual Cost Allocation) This is SAP standard and most likely you will find it.

  • WBS element is updated while settling cost from WBS to AUC

    Hi Experts
    At the time of settlement , when we settling the cost from WBS to AUC , WBS element is updated in AUC line item of accounting document , but it should not be updated actually.
    As result AUC cost is loaded on WBS and budget of WBS is get affected , furthermore system is not allowing for MIGO even budget is available but in CJ30 it is showing assigned value is more then original budget.
    Please suggest.
    Thanks & Regards
    shailesh

    Hi Saurabh ,
    I totally agree with you , but in our case system is not allowing(Error Message: Budget Exceeded) MIGO against capex PO - > WBS.
    Note : in our case , system is checking budget at the time of MIGO also.
    in our case , report  S_ALR_87013558 is showing wrong actual value and  also in CJ30 , total assigned value is larger then total distributable budget , As result our available budget gets negative figure in report S_ALR_87013558 , even i have already run CJEN->CJBN 2 or 3 times.
    Note: Our Commitment value is correct.
    Actually , according to report S_ALR_87013542 , system is showing correct actual value , that means we have sufficient available budget for further MIGO's
    Now may be , due to WBS element is updated in AUC line item of accouning document of settlement (WBS to AUC) , system loads AUC values to WBS unnecessarily , our available budget gets negative figure.
    For your reference , i am attaching screen shot of accounting document which is generated at the time of settlement from WBS to AUC.

  • Secondary cost from WBS to AUC

    Hi All,
    I am facing a problem in posting secondary costs from WBS to AUC.
    In Project systems they are considering secondary costs from the activities in the network. i settled the cost from network to WBS. and when i tried to settle From wbs to AUC system is asking for settlement costelement for secondary cost. But the secondary cost should be settled to costcenter but not to AUC.
    Please suggest how can we do the settlement from WBS to AUC. How to handle settlement of secondary costs in this scenario.
    Any help will be greatly appriciated.
    Rgds,
    Kumar.

    Through MM, contract is created (ME31N) whereby the settlement G/L accounts are identified.
    The contract then is released through MM with TCode ME21N which prompts Commitment Costs to be entered, after which the Service Entry Sheet SES through TCode ME81L which then automatically updates into the WBS.
    Through WBS, CJ88 would be the TCode you would have to use for settlement.
    Hope this helps.
    Thanks.

  • Move email from inbox to another folder, still appears in inbox. How to solve?

    move email from inbox to another folder, still appears in inbox. How to solve?

    Fixed the Trouble Shooting information in previous post.

  • How Can We move Suppliers from SOB to Another

    Hi to All,
    Would like to know how we can move suppliers from 1 SOB to another SOB.
    Basically I was given a list of suppliers from a SOB and need to move those suppliers to another.
    If anyone has gone through these steps. Please advise accordingly.
    Thanks

    Hello.
    For the best of my knowledge, SET_OF_BOOKS_ID is populated at suppliers level but not used since all sets of books can share the same supplier.
    Which is your version of APPS?
    Octavio

  • Secondary costs from WBS to an AuC

    Hi,
    1. I have executed Assessment[KSU5] that actually settled costs from secondary cost element[800099] to a WBS element [AAA]
    2. Now I am trying to settle costs [which is secondary] from WBS element [AAA] to an AuC using CJ88 and I am getting below error
    3. Just for info in allocation structure Z1, I have given settlement cost element for WBS, but still I am getting below error
    Any advises/ideas, thanks
    Complete allocation structure Z1
    Message no. KD503
    Diagnosis
    During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters).
    Cost element 800099 cannot be assigned to a settlement cost assignment in allocation structure Z1, and therefore it cannot be assigned to a settlement cost element.
    Procedure
    Possible solutions are as follows:
    If the posting under cost element 800099 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
    If the posting was made correctly, you can do the following:
    a) You can assign a different allocation structure to the sender: In the master data maintenance for the sender, choose "Settlement rule -> Goto -> Settlement parameters" and then enter a different allocation structure.
    If necessary, also check whether the correct allocation structure is entered in the settlement profile. The allocation structure is defaulted in the settlement profile when you create sender master data or when you maintain the settlement rule.
    You can update allocation structure Z1
    Regards,
    Sri
    Edited by: Sridhar Nagavarapu on Jul 4, 2008 12:45 AM
    Edited by: Sridhar Nagavarapu on Jul 4, 2008 12:47 AM

    Through MM, contract is created (ME31N) whereby the settlement G/L accounts are identified.
    The contract then is released through MM with TCode ME21N which prompts Commitment Costs to be entered, after which the Service Entry Sheet SES through TCode ME81L which then automatically updates into the WBS.
    Through WBS, CJ88 would be the TCode you would have to use for settlement.
    Hope this helps.
    Thanks.

  • Unable to  move data from Infooject to another Infoobject in APD

    Dear BW experts.
    I have data in Infoobject1 with 10 columns and I have another Infooject2 with 11 columns.
    I need to move data from infoobject1 to Infoobject2 both have identical fields except for the 11th column. In addition to filling up the common 10 columns, I need to calculate the data on the 11th column based on the previous record for each record. Hence I cannot move data directly from Inobject1 to Infoobject2.
    I try to use Analysis Process designer. In this, I could consider Infoobject1 as the source but in the choice of the target, I do not see Infoobect  but only see DSO and other objects not relevant for me.
    How do I move data from infoobject1 to Infoobject2 using ABAP routine in the APD.
    Kindly suggest.
    Thanks,
    Sai

    Hi,.
    See usefull Articles in
    http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
    Analysis Process Designer (APD)
    Analysis Process Designer (APD): Part - 1
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f06353dd-1fe3-2c10-7197-dd1a2ed3893e?quicklink=index&overridelayout=true 
    Analysis Process Designer (APD): Part - 2
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/analysis%20process%20designer%20(APD)%20Part%20-%202.pdf 
    Analysis Process Designer (APD): Part - 3
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/analysis%20process%20designer%20(APD)%3a%20Part%20-%203.pdf
    Thanks
    Surendra Reddy

  • Move focus from one to another itemRenderer inside DataGrid itemRenderer

    I have a mx: DataGrid with 4 columns that have a itemRenderer with the following settings:
    - Mx:DataGrid:
    <code>
    <mx:DataGrid id="itensPedidoCompraList"
          width="100%"
    height="120"   
    dataProvider="{ model.pedidoCompra.itens }"
    editable="true"
    itemEditEnd="itensPedidoCompraList_itemEditEndHandler(event)">
    </code>
    - Mx:DataGridColumn:
    <code>
    <mx:DataGridColumn headerText="{resourceManager.getString('cadastroPedidoCompra', 'ident.PercentualDesconto') }"
                       width="60"
                       textAlign="right"
                       rendererIsEditor="true"
                                          editorDataField="data">
          <mx:itemRenderer>
                     <fx:Component>
                           <mx:Canvas>
                                     <input:NumberInput width="55"                                                                number="@{ data.percentualDesconto }"/>
                           </mx:Canvas>
                </fx:Component>
          </mx:itemRenderer>
      </mx:DataGridColumn>
    </code>
    The user clicks on the line of the grid and click on the column to edit.
    After him change or add value, ENTER key and have to move the focus to another column in the same line.
    The way I'm doing, is moving to the column below.
    What is the best way to do to move to the right column?
    thank you

    Try adding a capture phase event listener to DataGrid for keyDown and changing the key from ENTER to TAB

  • Using API - move course from subsection to another?

    Is it possible - using web services / Java API - to move a course from one section to another?
    If so, which methods should I use? Either it is a single command (which I could not find), or it is a procedure by which where you recreate an entire album from scratch, by first getting its properties from the original location, then recreating that exact "structure" in the new section. Then what happens with the files one uploaded?
    I'm very new to jsp, had to setup a server yesterday with Tomcat to try out the API.
    Thanks!
    John Pariseau
    Message was edited by: ururk

    It worked! The title wasn't copied over, however. I had to add:
    destCourse.setName(course.getName());
    destCourse.setShortName(course.getName());
    to set the name. I had to set both, as it added newCourse to both the name and short name when ShortName was not specified. The Otherwise, it seems permissions copied over properly.
    Site site = conn.getSite();
    List sections = site.getSections();
    Section section = (Section) sections.get(0);
    Division division = (Division) section.getSectionItems().get(5);
    Section subSectionto = (Section) division.getSections().get(2);
    Section subSectionfrom = (Section) division.getSections().get(3);
    Course course = (Course) subSectionfrom.getSectionItems().get(0);
    Course srcCourse = course; // find the source course in the site tree
    Section destSection = subSectionto; // find the destination section
    Course destCourse = new Course();
    // if you want to make any changes as you copy, call setters on destCourse here...
    destCourse.setName(course.getName());
    destCourse.setShortName(course.getName());
    ITunesUResponse resp = conn.addCourse(destSection.getHandle(), srcCourse.getHandle(), destCourse);
    Message was edited by: ururk
    Message was edited by: ururk
    Message was edited by: ururk

  • HELP!  Trying to move master from one to another

    I've got pretty much the same problem. Let me explain what I've done so far.
    I uploaded photos to Album(Sledding) under Project(Winter). There were a few photos that belonged in the Album(Landscape) also under Project(Winter). So I dragged and dropped for Sledding Album to Landscape Album. I thought this would move them and not leave them in the original. But they were still there. So I went and tried to delete one, I got the message
    "Managed master files stored in the Aperture Library will be moved to the Trash.
    Referenced master files may be used by another project, library, or application. They will remain in their current locations unless you choose to move them to the Trash.
    All versions, adjustments, and metadata will be permanently removed from your library. This operation cannot be undone."
    Then went and check and the photo was removed from both albums and the project.
    I've messed around and deleted one from each of the different albums and project just to see what would happen. And the same happens no matter what album or project I'm in.
    I really need for someone to explain how this Master thing works.

    Tried Robocopy and Richcopy but not having any luck , the files transfer but the permissions are not transferring with them , there taking on the permission of the new system.
    Any suggestions
    This topic first appeared in the Spiceworks Community

  • How do I move pictures from iPad to another device ?

    My father intends to give me his iPad Air. Before I take over the iPad and reset it he had asked me to transfer all the photo's on it another device.
    He has an apple SD Card reader that connects to the iPad so is it possible to transfer the photos from the ipad to the SD card ?
    If not, what other options are open to me to save these photo's to an alternative device ?
    My knowledge of how to use an iPad is very very minimal - I'm new to the iPad and currently struggling to understand how to use it.
    Thanks 

    Photos will NOT transfer off the iPad to the SD card. The camera connection kit is for import only.
    Your easiest thing will be to use a service like Dropbox or other cloud service. Upload the photos there, download them where you want them to be. There may also be some photo apps that have better transfer services, but I don't have any to recommend.

  • How can I move mail from Gmail to another account?

    Mail.app in Mavericks is incompatible with Gmail. I use Gmail. I have about 2GB of mail, most of it in a few dozen archive folders, stored on Gmail, and (I think) duplicated locally on my Mac Mini.
    I think my best recourse is to switch to an email service provider that conforms to the IMAP standard (which Gmail does not). Assuming I find one, I will have both accounts, Gmail and the new one, in Mail.app. How can I move the mail from Gmail to the other account?
    In Mail.app in Mavericks, All Mail must be marked to show as a folder, and when I move a message from a folder in Gmail it will still be in the All Mail folder.
    When all folders are empty, including the Inbox, can I be sure that every message has been moved to the new account, even though every message is still in the All Mail folder?

    Mail.app in Mavericks is incompatible with Gmail. I use Gmail. I have about 2GB of mail, most of it in a few dozen archive folders, stored on Gmail, and (I think) duplicated locally on my Mac Mini.
    --> mine's working fine. I know there are issues, but it should work
    I think my best recourse is to switch to an email service provider that conforms to the IMAP standard (which Gmail does not).
    --> yes, it would be nice if they adhered to standards.  That said, mine works great.  So far.
    Assuming I find one, I will have both accounts, Gmail and the new one, in Mail.app. How can I move the mail from Gmail to the other account?
    --> If all you want to do is keep your history, make a local folder on your mac and drag all the mail messages there (both se4nt and incoming).  I am not sure what will happen if you later drag those into the new Xmail account
    When all folders are empty, including the Inbox, can I be sure that every message has been moved to the new account, even though every message is still in the All Mail folder?
    --> Dont look in "all mail". Open your inbox and look at each individual inbox.
    Good luck,. But first, try to fix your account.
    Grant

  • Settle Secondary Cost from WBS to AUC

    Hi Sapiens,
    Business Requirement --> Budget Control for all Material Procurement, thereafter settlement of cost thus booked under WBS to AUC or Asset as the case maybe.
    Current Setup --> Material/Inventory/Balance Sheet A/c has been made Statistical i.e. CE category "90". This is enabling AVAC during procurement and budget control. However when trying to settle the WBS it is NOT settling, error - "no cost available to settle".
    How to resolve the matters.
    Regards,
    GM

    Here is what SAP help says for cost element category 90:
    90: Cost Elements for Balance Sheet Accounts in FI
    Automatically assigned when you create cost elements in CO whose general ledger accounts in FI are asset reconciliation accounts (special balance sheet accounts), not income statement accounts. You cannot change this category in CO master data maintenance.
    FI does not require CO account assignments to cost elements of category
    90. However, if you enter an account assignment, it is only recorded statistically for true objects.
    Category 90 cost elements enable you to check the budget of an order or project when you acquire fixed assets that can be directly capitalized. To do this, enter the capital investment order or the WBS element in the corresponding field of the asset master data. Asset Management (AM) ensures that the specified order or WBS element is automatically entered in the document during the asset acquisition.
    In CO the order or WBS element is debited statistically. This statistical debiting is checked by the system using the budget during availability control.
    Notice the words in bold above.  Apparently, CE category 90 is when you acquire fixed assets that can be directly capitalized.  You need to specify the WBS element in the corresponding asset master data.
    I think your candidate is CE category 22.
    22: External Settlement
    Used to settle order costs, project costs, or cost object costs to objects outside of CO. These objects could be assets (Asset Management), materials (Materials Management), or general ledger accounts (Financial Accounting). The R/3 System creates an accounting document when the costs are settled.
    Cost elements of this category cannot be used for settlement within CO (cost centers, orders, projects, and so on). Use secondary cost element category 21 for this purpose. The system does not create an accounting document when costs are settled within CO.

  • Real Cost from WBS to Activity

    Hi,
    We are entering hours using Acct Assgt to a WBS elements by CAT2.
    I guess that some settlement or distribution process exists in order to allocate these costs to activities? Could anybody enlighten me or just give me a hint of how it works?
    Thanks

    KB15N seems a good way but we where looking for something not that manual. I'll try to find how settlement rules work.
    About your question, as we have a multilevel WBS structure, we first confirm work at the higher level, (highest WBS of the project), second we distribute these cost along all the activities, and finally to the WBSE of each activity. It might seem a bit crazy, but our customer usually repeats parts of the projects and this seems the only way to record the actual cost of each of these parts.
    Thanks

Maybe you are looking for