Move Crystal Reports 10 Registration To A New Machine

Is there a way to deregister a Crystal Key Code to transfer the application to a new PC and reregister?

Hello,
yes this is possible.
You can get the keycode from the registry searching for HKLM/software/Crystal Reports and use this on the new machine.
Best regards
Falk

Similar Messages

  • Crystal Report Group section in new page

    Hi all,
    I have a program written in VB.Net 2005 which display a report. In this report, I have a group by Item type ascending.
    When I run the program and load the report, it display the data correctly.
    When I move my mouse cursor on Group Section Hearder on the report, it will change to Magnify icon.
    When I double click on that Group title which is "Item Type" in my report, it will load a new page beside "Main Report" in Crystal tool bar.
    Problem is it didn't contain Report Header/Footer or Page Header/Footer.
    I like this feature but it only display the group section is not enough for me.
    Why I like it is because my report will have different Item Type. Each type can list up to more than 1 page.
    I want to print the report by Item Type. That means Item A may be total 2 pages, Item B may be total 6 pages.
    All I need to do is load the page like I mention above, it will only contain that Item Type and click on Print to print out particular Item type.
    Another issue is If i supress this Group Section in crystal report during design, when I run the program I can't double click to open up new page beside Main report.
    Any idea and solution for my case????
    Thanks.
    Edited by: scsfdev on Mar 4, 2010 9:34 AM

    Your report will need re-designing. What you are seeing is an expected behavior. Consider redesigning your report - possibly using subreports.
    If i supress this Group Section in crystal report during design, when I run the program I can't double click
    - again, an expected behavior. You suppressed the GroupSection. E.g.; you made it invisible / non functional / not needed by suppressing it...
    Ludek

  • Crystal Reports 10 - Cannot make new report

    I am having problems creating a report in Crystal Reports 10. I have the same settings in the OBDC as another machine. Theirs is working properly. I can refresh but cannot create a new report. We are currently connected to the AS/400 system.
    Thanks
    Mario

    Hi Mario,
    What exactly happens when you try to create a new report? Do you get any specific error message?
    Can you open previous reports without any problem?
    Regards,
    Anindita

  • Cannot save Crystal report layout or view new layout of report

    I am trying to make a change to a system crystal report (cust. recievables detailed aging). I had to make the date feild a little wider, so I edited the "system layout" that came with SAP (in my test DB of course), and I go to add-ins>sap business one>save. I get the following error "current user has no permissions for this operation". I am logged in as a superuser and full perm.
    If I "save-as" and save it to a layout in sap....when I go to open the aging with my newly created layout it freezes and asks for DB logon info to connect to my server from crystal. I do not normally have to do this when I preview my reports in the out of the box layouts. WHat am I doing wrong? I am new to crystal.

    The system will not allow me to export the system crystal report....it is grayed out, and it IS a crystal report. HOwever I can open it in crystal, then save it to my desktop, then from INSIDE of SAP in the report and layout manager I import the crystal report I made the changes to from my desktop into SAP and it saves and imports no problems. However when I go to view the report (and this is only the ones I import), it prompts me with the db login for our server to connect, and it is only with that report, once I enter sa credentials it is fine and shows up from there on in, but not if I log out of SAP and back in...then I have to put in my credentials again. Is this something having to do with the report when I make changes to it? I cant have users entering login info each time they run the new aging details report. Please advise what I may be doing wrong when I make changes to a crystal report. It was a very minor change....just moved a feild width.

  • Crystal Report  not listed Add New Item for Visual Studio 2010

    I just finished installing cryestal report for visual studio 2010.
    During the installation a visual studio error dialog popped up "Operation cannot be completed. Access Denied", the crystal report installation continued and was informed that the installation was successful.
    But on opening my visual studio project to add new item,  crystal report item is not listed there.
    Is there anything that needs to be done to get it listed in the Add New Item dialog for visual studio?

    I wonder what file you ran to install CRVS2010? Was it the MSI as opposed to the actual install file?
    The link to the correct install is here:
    http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_13_0_2.exe
    Is that the file you ran to install CRVS2010? E.g. as opposed to:
    http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0_2.zip
    - Ludek

  • Overwrite crystal report file name with new version but keep history

    I am writing a Crystal Reports .NET SDK in C# code to upload a crystal report files from its destination to CMC folder on BO XI R2 Platform.
    On "Upload Button" click_event, validate the two check boxes controls named "Keep History", and "Remove History". Once "Keep History" check box is selected, check If the SAME report file name exists in the same destination CMC folder, if Yes, overwrite it BUT Keep the History and all its associated objects like "recurring objects". If "Remove History" is selected, then remove the existing report and upload the new report file name.
    Please provide me some codes on how to do this task. This is definitely a "WIN" - "WIN" effort and contribution to my Team Goals.
    P.S. This is a similar scenario when you are uploading report on BO Enterprise R2 CMC.
    When Uploading a new report to a folder but same report file name exists, the BO System will promt message "Report File Name" already exists. Do you want to Overwrite it?" If Yes, then system will overwrite the file but it will keep the history and recurring objects.
    Any help would be greatly appreciated.
    Thanks,
    Bien

    Suggest looking at [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/NETBusinessObjectsEnterpriseSDKSamples] wiki for links to pertinent samples. Also, check out the [Developer Help File|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/WS_SDK/wssdk_server/default.htm]. Searching these forums for similar queries may also prove to be fruitful
    Ludek

  • Crystal Reports 2008 - Error setting new datasource location

    Hi All,
    We are experiencing an issue while trying to set datasource location for our RM 3.0 reports in Crystal Reports 2008 designer. As per guide "SAP BusinessObjects Process Control 3.0 and Risk Management 3.0 - How to build and Personalize Custom Crystal Reports" (step 11), after opening the desire report we go to DataBase-->Set DataSource Location and when selecting our RM system (which actually has the BI content addon installed on it), we got the following error message:
    "Some tables could not be replaced, as no match was found in the new data source. Please verify the table required for any unmodified tables"
    I'm new on this so I'm not sure if the table indicated in the original datasource should exist in my DB (new datasource) before doing this? If so, how those tables are imported or created in our DB?
    Could you please help me on this issue?
    Please let me know if any other detail or data is required.
    Regards

    Hi Don,
    Thanks for the update.
    Actually I've installed SAP Integration Kit and its Fixpack in both....BOE Server (which is the same as the SAP server) and in client pc.  In all cases we have select a typical installation which supposes the required drivers are available. Also I've followed Ingo's documentation to activate and publish standard Risk Management reports (RM reports). Everything works ok with them. We are able to access reports through the application.
    The issue appears when trying to customize one of these standard reports through CR Designer. For example if we select the "GRRM_Risk_by_Risk_Category" and try to customize it as indicated in the "SAP BusinessObjects Process Control 3.0 and Risk Management 3.0 - How to build and Personalize Custom Crystal Reports"...the table behind this report (table GRFN_CY_API_GRRM_R1) it's not in our RM System. My main concern or question is regarding this....Did I miss something while importing transports files, activating or publishing RM reports, etc....and thatu2019s the reason why this (and any other) table is not already in my system? I was not able to find where those tables are supposed to be or how they should be imported in my system. The odd thing is...that we are trying to customize and set the new data source for these reports to the same system from where they are being opened. Put in this way...RM reports have been activated in system A (RM System) and published to system B (BOE System). While customizing reports through CR Designer...we are actually opening reports from system A. These reports have as their original data source...a demo SAP system info (uxcir1p.wdf.sap.corp) and when we want to update this data source with our RM system....the error appears. The whole process is explained in the above mentioned guide for your reference.
    Hope being clear enough..
    Thanks for your help

  • Deploying 'Crystal Reports' on a 64 bit machine

    Hi,
    I am trying to deploy my application on a 64 bit machine.
    I am using Crystal Reports XI release 2.
    When I tried to deploy it ona 32 bit machine i simply added the
    CrystalReports11_5_NET_2005.msm file to my detup project and it worked.
    However, when I tried to do the same thing on the 64 bit (with a 64 bit setup project)
    I recieved a runtime error message:
    "An error has occurred while attempting to load the Crystal Reports runtime.
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime
    is not installed correctly."
    after that it was said:
    "Please install the appropriate Crystal Reports redistributable (CRRedist*.msi)
    containing the correct version of the Crystal Reports runtime (x86, x64 or Itanium) required..."
    I installed 'CRRedist2005_X64.msi' on the 64 bit machine and tried to run my setup with and without
    the CrystalReports11_5_NET_2005.msm file, and it didn't work.
    What should I do next?
    Thanks,
    Arik

    Hi Arik,
    You need to use the CrystalReports11_5_NET_2005.msm file for the application deployment.The 'CRRedist2005_X64.msi' is meant for the bundled version of Crystal for Visual Studio 2005.
    You could refer to this [Business Objects Note.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
    In addition, you would need to enable the 32 bit mode of the ASP.NET 2.0 on the deployment server. This is because it is necessary to run the application under 32 bit mode. Please refer this MS Kbase article for more info - http://support.microsoft.com/kb/894435
    Regards,
    Ranjeet.

  • Best way to move the aperture library to a new machine?

    Hi Folks,
    This must be an FAQ I just can't find it.
    I've just got a new machine and want to move Aperture to it. I have backed up the vault to an external drive. I 'think' you would restore the library from that. Any advice from those who've done this already, would be much appreciated.
    Mac Pro   Mac OS X (10.4.9)   Quad-Core Intel Xeon 4GB memory

    What it won't do is copy across your preferences, presets and keyword lists...
    Preferences - copy 'your home folder'/Library/Preferences/com.apple.Aperture.plist to the same place on the new computer.
    Presets and keywords lists etc. - copy the entire 'your home folder'/Library/Application Support/Aperture folder across.
    If you used Migration Assistant these have probably been copied across already.
    Ian

  • Crystal Reports not working at client Machine

    Hello,
    We developed few reports through crystal report tool .All the reports are working fine at server but when we go into client workstation than reports are not working and it also not showing any error.
    I already Install Microsoft Framework 2.0 service pack 1, Crystal runtime and crystal prerequisite at client workstation.
    Please reply ASAP.
    With regards
    Amit Tyagi

    Dear,
    I think you should go to the following link for your query about SAP Business One and Crystal Reports
    SAP Business One and Crystal Reports
    Regards
    Apple

  • Migration of Crystal Reports Server XI to new network server

    We are running CR Server XI on an older network server that is becoming unstable.   We would like to migrate CR Server and all its reports to a newer network server.
    Given that there are around 200 reports published and being run from its current location, is there any way to easily move the program and reports?    Any easy way to mass-change the ODBC database server info which is present in all these reports?

    I wrote this a couple years ago and you may want to open a message with the deployment team to verify or get updated steps.
    But this used to work fine when the version/patchwere the same in source/destination and was much faster then the import wizard.
    you can migrate the CMS database from the CCM by selecting the copy from data source.
    **CMS Source**
    1) Prior to copying the CMS database it's easiest to simply disable auditing on the source CMS database to avoid errors on the destination.
    **CMS Destination**
    2) Create a CMS database or instance for the destination
    3) Stop the CMS and all other services (page,cache,etc)
    4) Double click on the CMS
    5) Select the configuration tab
    6) Choose copy from datasource
    7) Click specify on the CMS Data source
    8) Select source CMS database (make sure middle ware i.e. ODBC connection is installed)
    9) Select destination CMS database
    **CMS Source**
    10) Stop CMS and all other services (page,cache,etc)
    **CMS Destination**
    11) Start the CMS
    12) Login to CMC select servers, delete all servers associated with the source CMS if they exist
    13) Stop CMS on the destination server
    14) Double click CMS on the destination server
    15) Select the configuration tab
    16) Select the change CMS cluster name to (and choose your server or cluster)
    17) Run regedit
    18) Go to HKEYLocalMachine\Software\Businessobjects\suite 11.5\Enterprise\CMSClustermembers
    19) Ensure that only the proper members are defined (i.e. your computer name only or your cluster members only). Remove anything that was added from the source system
    **CMS Source**
    20) Restart the CMS and all other services (page,cache,etc)
    21) Login to CMC select servers, delete all servers associated with the destination CMS if they exist
    22) Go to HKEYLocalMachine\Software\Businessobjects\suite 11.5\Enterprise\CMSClustermembers
    23) Ensure that only the proper members are defined (i.e. your computer name only or your cluster members only). Remove anything that was added from the destination system
    **CMS Destination**
    24) Delete any directories in the businessobjects\businessobjects 115\filestore
    25) Copy your FRS from the source businessobjects\businessobjects 115\filestore to businessobjects\businessobjects 115\filestore on the destination
    26) Restart CMS - Done
    NOTE: If XI replace 115 with 11. IF CE10 replace business objects with crystal enterprise and 115 with 10
    Regards,
    Tim

  • HT4733 Can I move this software on to my new machine?

    a quick question about moving this software on to other machines. If I buy this and install it on my imac, can I then install it on my new imac which I may be buying in a few months?
    If I had the install CD that would be fine but if its a download from the Apple website, will they let me download it a 2nd time?
    Thanks a lot

    Hi Tom,
    Thanks for your speedy response. I just thought it was tricky to move it as it installs itself in lots of weird locations across the machine.
    If its easy to re-download it then thats ideal!
    Thanks

  • Schedule Webi (and Crystal) report without creating a new instance

    Hi all,
    I'm looking for the way to not create a new instance of the report when we schedule a report? Is it any actions on the InfoObject object? Or is it just impossible to do?
    Thanks in advance !
    Edited by: jerome.vervier on Nov 21, 2011 11:40 AM

    Hi,
    With regards to your query, whenever a report is scheduled an instance of it will be created.
    Therefore, it is not possible to schedule a report without creating an instance.
    Regards,
    Shreyans

  • How do I move my iWeb website to a new machine?

    Greets all,
    I am currently using a buddies MBP while I'm away from home (deployed to Baghdad) lucky Me Anyway, he just upgraded his to Leopard and iLife '08. I have had a little free time lately and decided to play with iWeb...I like it. So, I will most likely buy it and upgrade when I get home.
    I have spend a little time creating the family website, but then I realized I may not be able to take the info home with me. I found another post that said there was the "domain" file under HD/Users/your user name/Library/Application Support/iWeb. If I take that file home with me, can I just put it in the same place on my machine and have it all work? Without redoing everything.
    Thanks in advance.

    mptalent,
    I'm sorry I don't know how to merge the files but yan keep them both on your computer in separated folders or named differently.
    Just double click on the one or on the other to open the one you want to edit.
    As far as I know there's only one person on this forum that knows how to merge them and that's not me...
    originalgoast,
    I don't know why time machine didn't back it up. But what I know for sure is that it should back it up...
    If you have your files on .Mac (the published ones which are .html) then there's no way to get them back into iWeb again. The only way would then be to rebuild the website and copy its content from the web published site textfield by textfield (selecting all and copy and paste turns out in a mess)
    Cmg9,
    Search for the Domain file in the Time Machine backup, it has to be there somewhere... You might also read the answer I gave to originalgoast
    As QuickTimeKirk told previously in this post that's the location where it's stored usually, search Time Machine backup:
    The only way to get iWeb pages back to iWeb and edit those pages is to have the Domain.sites2 file where iWeb stores its files. To find that file go to
    User/Library/Application Support/iWeb/Domain.sites2
    If you can’t find it here search for it with spotlight. Note that the extension .sites (iWeb 1.0) or .sites2 (iWeb 2.0) may be hidden, also search for Domain only. To see if a Domain file is iWeb ’06 or iWeb ’08 select the file press Command(Apple)+i under "Name & Extension" you will find that it is .sites or .sites2.
    To get the site showing up in iWeb just open the Domain.sites file by double clicking on it and your sites and pages will show up on the left side in the iWeb page browser.
    Regards,
    Cédric

  • Crystal report 2008 on a 64 bits machine

    My company would like to develop a new .Net application which produce and view 
    some rountine crystal report on a 64-bits machine.
    At the same time, this machine will also install a stand alone full product crystal report
    2008 which allow to develope some adhoc report.
    I would like to ask whether the full product crystal report 2008 can install and
    run perfectly on a 64 bits machine. Do I need to have any special configuration during
    or after installation?
    On the other hand, I observe that the crystal report 2008 with service pack 0 can
    support 64 bits. Is it true that the evaluation copy of crystal report 2008
    on official site is that version and I can evaluate it on a 64 bits machine ?
    Ricky

    Hi Ricky,
    The full product Crystal Report 2008 can be installed and can run perfectly on a 64 bits machine.
    Hardware Support
    u2022 Crystal Reports® is supported running on 32-bit versions of Windows running on x86 and x64 CPUs made by AMD and Intel.
    u2022 Crystal Reports® is supported running on 64-bit versions of Windows running on x64 CPUs made by AMD and Intel.
    You can download the Crystal Report 2008 with Service Pack 0, evaluation copy from official site and can evaluate on a 64 bits machine.
    http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CR2008
    Hope this resolves your issue.
    Regards,
    Abhijeet T

Maybe you are looking for