"move database-path" not available
Exchange 2010 sp3
now I have a spare drive where I can move the old databases to the new databases. problem is when I right-click on any databases to be moved, the option "Move Database Path" is not available. it's not even listed.
how can I move my databases to the new drive then?
Are you selecting the database from the "Database Management" tab in Organization Configuration node in EMC?
http://technet.microsoft.com/en-gb/library/dd351168(v=exchg.141).aspx
Similar Messages
-
URGENT :ABAP Database is not available via R3trans
Checking ADA db Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
11:47:14 13.03.2008 LOG: Effective User Id is root
This is Saposcol Version COLL 20.95 700 - v2.00, Intel x86 with Linux, 2007/02/16
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 17267) is already running .....
saposcol already running
Running /usr/sap/DEV/SYS/exe/run/startdb
Trying to start database ...
Log file: /home/devadm/startdb.log
Database already running
/usr/sap/DEV/SYS/exe/run/startdb completed successfully
Starting SAP Instance SCS00
Startup-Log is written to /home/devadm/startsap_SCS00.log
Instance Service on host sap-devel started
Instance on host sap-devel started
Starting SAP Instance DVEBMGS01
Startup-Log is written to /home/devadm/startsap_DVEBMGS01.log
Instance Service on host sap-devel started
Instance on host sap-devel started.
checked with command r3trans -d-v.
the following error is displayed.
This is R3trans version 6.14 (release 700 - 10.09.07 - 09:57:00).
unicode enabled version
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/DEV/SYS/exe/run') or dbms_type ('ADA')"
R3trans finished (0012).
any suggestions
thnx and regardsHi,
can you please show us the content of the R3trans logfile, created by the R3trans -x command?
Please note that if you're an official SAP customer you should open a OSS message for your issue, if not already done so. Please read [this thread|MaxDB/liveCache Forum: target audience and relevant support;.
Additionally, please refrain from using things like 'URGENT'. More on this can be read [here|Welcome and Rules of Engagement;.
Thanks & regards,
Roland -
The CMS system database is not available (FWM 02088)
Hi all,
After installation of BOE 3.1 the system fires back the error message on attempt to logon to CMS:
Account Information Not Recognized: The CMS system database is not available. This error cannot be rectified by the end user. Report this error to your system administrator or database administrator. (FWM 02088)
Any inputs? I've tried with new SIA as well as fresh installation but the issue persists.
Regards.were you able to see any DB error messages in event log ?
can you connect to your DB from the server itself ? (could be FW issue)
What do you see under the CCM ? Do the SIA is in green state ?
For me it is probably one of 2 things : FW issue (but install will have failed) or DB issue
Sam.
Edited by: sjolly on Sep 17, 2009 9:46 AM -
Problem Installing VM: "Database is not available"
I'm trying to install VM Manager 2.2 but when I get to creating the database I get this message:
Checking the availability of the database ...
Database is not available
Please check log from /var/log/ovm-manager/db.log
This is my db.log file:
2010-07-06-10-19-11-AM
Prepare to install the Oracle XE database ...
2010-07-06-10-25-34-AM
Prepare to install the Oracle XE database ...
2010-07-06-10-27-50-AM
Prepare to install the Oracle XE database ...
Installing the oracle-xe-univ package (rpm) now ...
warning: source/oracle-xe-univ-10.2.0.1-1.0.i386.rpm: Header V3 DSA signature: NOKEY, key ID b38a8516
Preparing... ##################################################
oracle-xe-univ ##################################################
Executing Post-install steps...
You must run '/etc/init.d/oracle-xe configure' as the root user to
configure the database.
Done
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 06-JUL-2010 10:32:52
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Listener failed to start. See the error message(s) above...
ORACLE instance started.
Total System Global Area 805306368 bytes
Fixed Size 1261444 bytes
Variable Size 209715324 bytes
Database Buffers 591396864 bytes
Redo Buffers 2932736 bytes
TO_CHAR(SYSTIMEST
20100706 10:32:53
Allocating device....
Specifying datafiles...
Specifing datafiles...
Restoring ...
Restore done.
PL/SQL procedure successfully completed.
TO_CHAR(SYSTIMEST
20100706 10:33:34
Control file created.
PL/SQL procedure successfully completed.
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 805306368 bytes
Fixed Size 1261444 bytes
Variable Size 209715324 bytes
Database Buffers 591396864 bytes
Redo Buffers 2932736 bytes
Control file created.
System altered.
Database altered.
Database altered.
System altered.
System altered.
Database altered.
Tablespace altered.
TABLESPACE_NAME
USERS
SID PROGRAM SERIAL#
USERNAME
35 [email protected] (QMNC) 1
39 [email protected] (TNS V1-V3) 1
SYS
40 [email protected] (MMNL) 3
SID PROGRAM SERIAL#
USERNAME
41 [email protected] (MMON) 3
42 [email protected] (RECO) 1
43 [email protected] (SMON) 1
SID PROGRAM SERIAL#
USERNAME
44 [email protected] (CKPT) 1
45 [email protected] (LGWR) 1
46 [email protected] (DBW0) 1
SID PROGRAM SERIAL#
USERNAME
47 [email protected] (MMAN) 1
48 [email protected] (PSP0) 1
49 [email protected] (PMON) 1
12 rows selected.
User altered.
User altered.
System altered.
Library created.
Directory created.
Commit complete.
PL/SQL procedure successfully completed.
Commit complete.
PL/SQL procedure successfully completed.
File created.
Database closed.
Database dismounted.
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 805306368 bytes
Fixed Size 1261444 bytes
Variable Size 209715324 bytes
Database Buffers 591396864 bytes
Redo Buffers 2932736 bytes
Database mounted.
Database opened.
'UTL_RECOMP_BEGIN:'||TO_CH
utl_recomp_begin: 10:34:05
PL/SQL procedure successfully completed.
'UTL_RECOMP_END:'||TO_CH
utl_recomp_end: 10:34:05
User altered.
User altered.
User altered.
User altered.
User altered.
User altered.
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:34:05 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
Enter user-name: 2010-07-06-10-38-31-AM
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:38:51 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
Enter user-name: 2010-07-06-10-51-18-AM
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:52:09 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
Enter user-name: 2010-07-06-10-55-43-AM
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:55:53 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
Enter user-name:Hi,
I think it is essential to set the official ip and the correct hostname in the /etc/hosts file.
Per default there is the loopback IP bound to the hostname and localhost, you should change this to the desired IP.
it should be something like this:
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.1.1 yourhost.yourdomain yourhost
Otherwise you will face some other nasty side-effects, with nfs for example.
Hope that helps
Michael -
VM Manager Installation: "Database is not available" problem
I'm trying to install VM Manager 2.2 but when I get to creating the database I get this message:
Checking the availability of the database ...
Database is not available
Please check log from /var/log/ovm-manager/db.log
This is my db.log file:
2010-07-06-10-19-11-AM
Prepare to install the Oracle XE database ...
2010-07-06-10-25-34-AM
Prepare to install the Oracle XE database ...
2010-07-06-10-27-50-AM
Prepare to install the Oracle XE database ...
Installing the oracle-xe-univ package (rpm) now ...
warning: source/oracle-xe-univ-10.2.0.1-1.0.i386.rpm: Header V3 DSA signature: NOKEY, key ID b38a8516
Preparing... ##################################################
oracle-xe-univ ##################################################
Executing Post-install steps...
You must run '/etc/init.d/oracle-xe configure' as the root user to
configure the database.
Done
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 06-JUL-2010 10:32:52
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Listener failed to start. See the error message(s) above...
ORACLE instance started.
Total System Global Area 805306368 bytes
Fixed Size 1261444 bytes
Variable Size 209715324 bytes
Database Buffers 591396864 bytes
Redo Buffers 2932736 bytes
TO_CHAR(SYSTIMEST
20100706 10:32:53
Allocating device....
Specifying datafiles...
Specifing datafiles...
Restoring ...
Restore done.
PL/SQL procedure successfully completed.
TO_CHAR(SYSTIMEST
20100706 10:33:34
Control file created.
PL/SQL procedure successfully completed.
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 805306368 bytes
Fixed Size 1261444 bytes
Variable Size 209715324 bytes
Database Buffers 591396864 bytes
Redo Buffers 2932736 bytes
Control file created.
System altered.
Database altered.
Database altered.
System altered.
System altered.
Database altered.
Tablespace altered.
TABLESPACE_NAME
USERS
SID PROGRAM SERIAL#
USERNAME
35 [email protected] (QMNC) 1
39 [email protected] (TNS V1-V3) 1
SYS
40 [email protected] (MMNL) 3
SID PROGRAM SERIAL#
USERNAME
41 [email protected] (MMON) 3
42 [email protected] (RECO) 1
43 [email protected] (SMON) 1
SID PROGRAM SERIAL#
USERNAME
44 [email protected] (CKPT) 1
45 [email protected] (LGWR) 1
46 [email protected] (DBW0) 1
SID PROGRAM SERIAL#
USERNAME
47 [email protected] (MMAN) 1
48 [email protected] (PSP0) 1
49 [email protected] (PMON) 1
12 rows selected.
User altered.
User altered.
System altered.
Library created.
Directory created.
Commit complete.
PL/SQL procedure successfully completed.
Commit complete.
PL/SQL procedure successfully completed.
File created.
Database closed.
Database dismounted.
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 805306368 bytes
Fixed Size 1261444 bytes
Variable Size 209715324 bytes
Database Buffers 591396864 bytes
Redo Buffers 2932736 bytes
Database mounted.
Database opened.
'UTL_RECOMP_BEGIN:'||TO_CH
utl_recomp_begin: 10:34:05
PL/SQL procedure successfully completed.
'UTL_RECOMP_END:'||TO_CH
utl_recomp_end: 10:34:05
User altered.
User altered.
User altered.
User altered.
User altered.
User altered.
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:34:05 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
Enter user-name: 2010-07-06-10-38-31-AM
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:38:51 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
Enter user-name: 2010-07-06-10-51-18-AM
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:52:09 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
Enter user-name: 2010-07-06-10-55-43-AM
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:55:53 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
Enter user-name:Fixed. I think it was a problem related to the hostname.
-
Portal Installation Error: J2EE Database is not available via test
When starting SAP with startsap I get this error
Checking EZP Database
J2EE Database is not available via test
See logfile JdbcCon.log
In the JdbcCon.log:
Start: Fri Nov 20 08:25:28 MST 2009
Error: Couldn't connect to DB
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
The listener is up & running. I can tsnping to the EZP. The database is up & running
This is a new portals instance on AIX
hostname: ezpdb01-lp
OS: AIX 6.1
Oracle: 10.2.0.4
Any advice?Hi Bill,
Your are able to execute command start SAP succefully by using host
ezpdb01
I am using the correct hostname...
listener.ora
HOST = ezpdb01-lp
tnsnames.ora
HOST = ezpdb01-lp
UNIX - hostname
ezpdb01-lp
1)
ezpdb01-lp:ezpadm 7> startsap ezpdb01-lp
no start profiles found
2)
ezpdb01-lp:ezpadm 7> startsap ezpdb01
I get the same error in JdbcCon.log
Start: Tue Dec 01 08:45:53 MST 2009
Error: Couldn't connect to DB
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
1. Now first step take backup of tnsname.ora & listner.ora
2. Edit hostname present from ezpdb01-lp to ezpdb01 in both the file.
3. Now try to start sap with command
startsap ezpdb01
, if still error exits then pls paste the contain present in sqlnet.ora.
Thanks
Anil -
J2EE Database is not available via test
Hello my friends,
I've got a problem with my SAP NW/DB2 installation. When i want to start sap, i get the following output:
si4host:si4adm 13> startsap si4host
Checking DB6 db Database
ABAP Database is not available via R3trans
Checking DB6 db Database
Error: java.io.FileNotFoundException: JdbcCon.log (Permission denied)
J2EE Database is not available via test
See logfile JdbcCon.log
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.86 640 - V1.12 for Linux
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 14643) is already running .....
saposcol already running
Running /usr/sap/SI4/SYS/exe/run/startdb
/usr/sap/SI4/SYS/exe/run/startdb completed successfully
Checking DB6 db Database
ABAP Database is running
Starting SAP Instance SCS01
Startup-Log is written to /home/si4adm/startsap_SCS01.log
Instance on host itpc1f41009 started
Starting SAP Instance DVEBMGS00
Startup-Log is written to /home/si4adm/startsap_DVEBMGS00.log
Instance on host itpc1f41009 started
IGS on host itpc1f41009 started
The server runs on suse 9.3.
Anybody know how to solve this?
Greetings
ChantalHi
This is a common problem .Actually ur database pwd is not same mentioned in the configtool----
secure store.
Change the database password and update the same in the secure store of configtool.
Restart the engine.Your problem will be solved.If you have any confusion about how to change the pwd in secure store.Feel free to contact -
Database is not available via R3trans
Hi,
We are moving the CI to the different server keeping the database on the same server, it is dual stack BI system, SCS instalaltion went fine, for the CI installation, we got to the error while bringing up the CI , it is not able to connect to the database
startsap r3
Checking BXT Database
Database is not available via R3trans
Database BXT must be started first
But
R3trans -d
This is R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
unicode enabled version
R3trans finished (0000).
The trans.log doesn't give any error
The listener is up on the database and listening to the port as the R3trans -d went through.
Please let me know if there is anything can be done, i am banging my head for a week now, I have tried the profile parameters and resetting the db users passwords also.Hi,
Thanks all for replying,
The Dev logs are not generated as of now, so can't paste them,
Copied the lastest version of kernel, but it didn't work.
Put the tnsname and schema profile, dbms\type was already there, But it didn't work too.
Any other suggestions
VJ -
Can not start instance SAP - ABAP Database is not available via R3trans
Dear all !
My OS : Linux RHEL 4U7 32bit
Oracle 10G R2 32bit 10.2.0.2
when system running but power off suddenly
and when power on ->
i am having problem as below when i start instance SAP (Databse Oracle Started)
Step 1 : I login user (ora<sid>) of Oracel to start up database
Database startup -> OK
then i tried to shutdown database -> OK too
and start up again -> OK
Query -> OK
I think Database do not problem
Step 2: start listener -> OK
Step 3: i login user (<sid>adm) and startup instance SAP (command : startsap r3) with error:
Checking SED Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
11:11:48 10.02.2010 LOG: Effective User Id is root
This is Saposcol Version COLL 20.90 700 - Intel x86 with Linux, PL:75, Aug 29 2006
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 6870) is already running .....
saposcol already running
ABAP Database SED must be started first
Please help me to resolve this problem
Thanks for your adviceDear all !
1. output of tnsping SED :
TNS Ping Utility for Linux: Version 10.2.0.2.0 - Production on 11-FEB-2010 13:51:24
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/SED/102_32/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = sapsed)(PORT = 1527))) (CONNECT_DATA = (SID = SED) (GLOBAL_NAME = SED.WORLD)))
OK (0 msec)
2. output startsap_.log
Checking SED Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
saposcol already running
ABAP Database SED must be started first
---> output above repeats many
3. output trans.log
4 ETW000 R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 11.02.2010 - 13:49:36
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Feb 11 13:49:36 2010 159 0.000159
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000186
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 55 0.000241
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/SED/SYS/exe/run/dboraslib.so' ...
4 ETW000 63 0.000304
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/SED/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 16430 0.016734
4 ETW000 [dev trc ,00000] Library '/usr/sap/SED/SYS/exe/run/dboraslib.so' loaded
4 ETW000 56 0.016790
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/SED/SYS/exe/run/dboraslib.so
4 ETW000 41 0.016831
4 ETW000 [dev trc ,00000] Version of '/usr/sap/SED/SYS/exe/run/dboraslib.so' is "700.08", patchlevel (0.73)
4 ETW000 94 0.016925
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/SED/SYS/exe/run/dboraslib.so
4 ETW000 38 0.016963
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/SED/SYS/exe/run/dboraslib.so
4 ETW000 68 0.017031
4 ETW000 [dev trc ,00000] New connection 0 created 44 0.017075
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 46 0.017121
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 38 0.017159
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 37 0.017196
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.017235
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 480 0.017715
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 42 0.017757
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 3789 0.021546
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 48 0.021594
4 ETW000 [dev trc ,00000] Connecting as /@SED on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 51 0.021645
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 43 0.021688
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x9511ea0 0x951750c 0x9516d94
4 ETW000 40 0.021728
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 40 0.021768
4 ETW000 [dev trc ,00000] Allocating server context handle 52 0.021820
4 ETW000 [dev trc ,00000] Attaching to DB Server SED (con_hdl=0,svchp=0x9516d20,svrhp=0x9528504)
4 ETW000 88 0.021908
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12505
4 ETW000 4712 0.026620
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12505'
4 ETW000 49 0.026669
4 ETW000 [dev trc ,00000] Try to connect with default password 62 0.026731
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@SED on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 39 0.026770
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 56 0.026826
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x9511ea0 0x951750c 0x9516d94
4 ETW000 47 0.026873
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x9528504)
4 ETW000 37 0.026910
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x9516d20,srvhp=0x9528504)
4 ETW000 37 0.026947
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x9528504 45 0.026992
4 ETW000 [dev trc ,00000] Allocating server context handle 48 0.027040
4 ETW000 [dev trc ,00000] Attaching to DB Server SED (con_hdl=0,svchp=0x9516d20,svrhp=0x9528504)
4 ETW000 60 0.027100
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12505
4 ETW000 1538 0.028638
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12505'
4 ETW000 41 0.028679
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12505 performing CON [dblink#3 @ 431]
4 ETW000 131 0.028810
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12505: TNS:listener does not currently know of SID given in connect descriptor [dblink#3 @ 431]
4 ETW000 39 0.028849
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'SED'"
thansk for your help
Edited by: myfriend280985 on Feb 11, 2010 7:53 AM -
Error 8201 (Database version not available) during ODatabase() in VC++
Hello all,
I'm Beginner and i think i have a stupid problem,
when i execute under VC++ V6 SP5 (and IE 5.5 SP2) Under W98se :
OStartup();
ODatabase odb("essai","SYSTEM","manager"); // 'essai' is an existing database, no problem with sql*plus
if (!odb.IsOpen()) {
long err = odb.ErrorNumber();
char chaine[100];
sprintf(chaine,"Error n0=%ld",err);
::MessageBox(0,chaine,"DataBase",0);
Displaying 'Error n08201' : 'Database version not available' ???
PLEASE, THIS PROBLEM TURN ON MY MIND DURING ALL THIS WEEK-END AND I TEST, I RELEASE, I SEARCHE, AND NOTING...My Reponse from My Question :
It was so easy to run 'lsnrctl start'.
(Listen Module Manager).
2 days to find this.
VB doesn't work anymore.
I've executed an pre-compiled example 'login.exe' which display --> 'No Listen Module'.
Bye All. -
Movie export size not available/balance between size and quality
Hi,
I imported some film into iMovie 08 from my Canon HD camcorder, at full 1920 x 1080 size. After I finished editing it, I wanted to export the final movie at 960 x 540. This size is not available under the "standard" share options ("large" is 1280 x 720 and "medium" is I can't remember what exact size but smaller than 960 x 540). Similarly, when I go into "Export using QuickTime" and try to create an H.264 movie there, the 960 x 540 option simply isn't available. What gives?
The reason I wanted to use this size was to try to cut down on file size. I exported the movie at 1280 x 720 and got a 380Mb file. So I wanted to try it at 960 x 540 and see what difference that made to the file size and quality. Since I couldn't seem to do it using iMovie, I ended up taking the 1280 x 720 video and using ffmpegx to convert it to 960 x 540. The problem is that I ended up with a file that was, bizarrely, even bigger (384Mb), and that had a thin green line across the bottom of the video.
So, in summary, my three questions are:
1. Why can't I export from iMovie in 960 x 540?
2. Why does my ffmpegx conversion result in an even bigger file?
3. What's the best way for me to get the optimum balance between file size and quality? (For viewing on Apple TV/HD television).
Thanks in advance,
RobAnother very good 3rd party slideshow application is PhotoPresenter. It has some of the nicest themes I've seen in any slideshow application (including the Apple TV introduction theme) and will export to a variety of sizes up to 720 x 480 which is DV-DVDCPRO - NTSC.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
After install, database is not available. How can I create a new database?
I installed "Oracle Database 10g Express Edition".
After install I tried to "Go To Database Home Page" and received a "Page not found" error.
If I run SQLPLUS and ...:
connect / as sysdba
shutdown immediate
startup
I get
ORACLE instance started.
Total System Global Area 805306368 bytes
Fixed Size 1289996 bytes
Variable Size 209715444 bytes
Database Buffers 591396864 bytes
Redo Buffers 2904064 bytes
ORA-00205: error in identifying control file, check alert log for more info
The alert log (C:\OracleXE\app\oracle\admin\XE\bdump\alert_xe.txt) says
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Wed Mar 04 13:57:03 2009
ALTER DATABASE MOUNT
Wed Mar 04 13:57:03 2009
ORA-00202: control file: 'C:\ORACLEXE\ORADATA\XE\CONTROL.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
And I can not find any control files on my PC.
Can I create one?Yes. This is correct. There is no control file. In fact, there is nothing in C:\OracleXE\oradata\XE. It appears that the install did not create a database, so I figured I'd try to create one myself
but did not haev any success. Should the install have created a database? I did install the same product on a laptop and it seemed to work fine. The problem I ran into was that it does not have
enough memory to be useful, only 512 Meg. So I decided to install it on my desktop PC with 3 Gig. This is where I am having the problem. I tried a re-install but still no database was created. -
If parent database is not available
Hi Oracle masters
I have below script, here i want to add a pice of code which actully check and abort script if parent database (TEST) is not available.
Can you please guide me aur modified below script.
# Log into "TEST" database and run the scripts to refresh from the
# standby database which now should be open in read only mode -
echo "`date` : Starting refresh of user_rep schema...."
export ORACLE_SID=TEST
sqlplus /nolog <<EOF
connect user_rep/password
set echo on
spool $SPOOL_FILE append
@user_rep.refresh.sql
spool off
EOF
Thanks in advanced.Prashant,
This is a duplicate post. close this post and use suggestion posted in your previous post and let us know i fyou have any questions.
Regards -
Database Option not available in UCCX 9.0.2
Hello there,
I have installed Cisco UCCX 9.0.2 and trying to access Database option under Subsystems but unfortunately it is not listed under Subsystems menu.
Snapshot is attached..
Is it a licensing issue or something else has to be done?
Thanks in advance.Hi Afzal,
depends on the license :
The database subsystem is available if your system has a license installed for
either the Unified IP IVR or Unified CCX Premium product packages. If you are
not using Unified CCX applications that require access to databases, you do not
need to provision the Database subsystem.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_0/configuration/guide/UCCX_BK_U767AC77_00_uccx-admin-guide/UCCX_BK_U767AC77_00_uccx-admin-guide_chapter_01000.html
u have got which license with you ?
regds,
aman -
Database log not available alert
Database abc is on sql instance test1\test
I get following scom alert
at 6:00 AM
The log
for database 'abc' is not available. Check the event log for related error messages. Resolve any errors and restart the database.
I check 6:00 am event viewer and find following log from operation manager---What is issue and how to fix it?
Date 4/6 Source: HealthService
Time: 6:00:00 AM Category: Health Service
Type: Warning Event ID: 5399
User: N/A
Computer: test1
Decsription:
Event Type: Warning
Event Source: HealthService
Event Category: Health Service
Event ID: 5399
Date: 4/5/2014
Time: 9:30:00 PM
User: N/A
Computer: Test1
Description:
A rule has generated 50 alerts in the last 60 seconds. Usually, when a rule generates this many alerts, it is because the rule definition is misconfigured. Please examine the rule for errors. In order to avoid excessive load, this rule will be temporarily
suspended until 2014-04-05T21:39:59.1612979-05:00.
Rule: Microsoft.SQLServer.2005.Operating_System_error_encountered_1_5_Rule
Instance: test
Instance ID: {EFEA1D5F-A78D-A15E-0B36-F287DDB50225}
Management Group: abcdef
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.Hi bestrongself,
According to your message, we need to find this rule in the console for troubleshooting this issue. Firstly, we search the display name of the rule/monitor/discovery, then paste the display name in the search window, click ”View Knowledge” to bring up the
rule properties. From here , you can view the data source, and get a better idea of what the rule/monitor/discovery does, and how to troubleshoot it. For more information, see:
http://blogs.technet.com/b/kevinholman/archive/2009/04/17/how-to-find-a-specific-rule-monitor-discovery-in-the-console-when-all-you-have-a-more-cryptic-id-in-an-alert.aspx
The rule can generate alerts whenever an error occurs in the Application event log or the System event log on any server being monitored by Operation Manager, for more information, see:
Operations Manager Alerts for Event Log Errors
Hope it can help you.
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support
Maybe you are looking for
-
Apple support had not responded to my requests for clarification. The update corrupted both ITunes and Office Outlook mobileme. The error message when I tried to start up I Tunes was Error 7 Windows 193. I un installed I Tunes and re installed t
-
Multiple Headphone / Monitor Mix
Just wondering how to get multiple headphone mixes? Running 2 (soon to be 3) daisyied FirePod's. They each have what seems to be 8 ins and 2 outs. I'd like to be able to give a separate mix for each output (like a soundboard with 4+ monitor knobs on
-
Sending mail from servers with non-ASCII names
As part of an effort to internationalize our product we're testing on machines with host names that include non-ASCII characters (accented e's and whatnot). When trying to send mail from these machines we're getting: javax.mail.MessagingException: 50
-
Custom view for section header in TableView
Hello, I want to put a custom view, which I created in Interface Builder, as a section header for my TableView. I created a method in the HeaderViewController to set the label in the TableView header but the header doesn't change. I also tried manipu
-
Preview keeps crashing & won't open
Hi - hoping someone can help. The app "Preview cannot open, and keeps crashing... it's really frustrating as I can't open any pics. It says the below when trying to open: Restore Windows he Application "Preview" unexpectedly quit while trying to rest