Move edited recording back to meeting room recording folder?

How can I move an edited meeting recording from my content folder back to my meeting room recording folder.
I want to make it accessible to current registrants, plus others who will be registering over the next few weeks.  If I just add more "permissions" to the FLV file in my content folder, it won't automatically update permission for the new people who register.
Thanks!!! 

Nope, this is a one way move. Once it is in the Content library, it is disassociated from the Meeting and can't be put back.
You can edit the recordings while they are in the Recordings section of the meeting room though, so you shouldn't have to move them to the Content library if you don't want to.

Similar Messages

  • IMovie '11: how to move edited clips back into the event library?

    I made a green screen video that is supposed to be the foreground, and edited out the ums and ahs.  Now I need to add a green screen background, which apparently I cannot do after already inserting the green screen foreground footage.  (I would LOVE to be able to do that, but apparently you cannot.)  I have tried to drag the edited videos back into the event library, but they bounce back out, and I have checked all of the menus twice and there is no command to export to event library.  Help!  I need to insert a background and don't have another hour to re-edit from scratch.

    Hi
    No - there are no easy and straight forward way to do this - BUT
    You must do as one does in iMoivie when there is a need to combine several functions.
    Export out (the manipulated clip) as a full quality QuickTime movie (just this part)
    Then import this as a new Event
    Put this into a new project (if several effects is to be applied) or into Main movie if You only need to apply one more thing as a GreenScreen.
    For several effects - one might need to Export/Import several times. Much easier in FinalCut Pro.
    Yours Bengt W

  • How do I get the codec for .mov files recorded on an ipad, so I can edit them in premiere El. 12?

    I have .mov files recorded from an ipad with these specs:
    AAC, Mono, 44.100 KHZ
    H.264 320x568 (yes the ipad was used vertically, not horizontally)
    29.96 fps
    I want to edit them in premiere 12, but get this error message:
    This type of file is not supported or the required codec is not installed.
    What are my options? Thanks!

    linn749
    Thanks for the reply.
    As for orientation, there is a rotation feature in Premiere Elements 12....at the Timeline level, you can right click the clip and select Rotate 90 Left or Rotate  90 Right. So that may help.
    This is what you may want to try and see what this looks like
    1. Open Premiere Elements 12 to its Expert workspace
    2. Go to File Menu/New/Project and Change Settings
    3. In the Change Settings dialog, change the project preset to NTSC DV Widescreen.
    4. Before you exit that area, in the last dialog that you see (new project dialog), make sure you have a check mark next to "Force Selected Project Setting on this Project".
    5. Back in the Expert workspace, use Add Media/Files and Folders/ to bring your video into Project Assets from where you will drag it to Video Track 1. We can talk about edits if necessary.
    6. Publish+Share/Disc/DVD disc with preset set for NTSC_Widescreen_Dolby DVD.
    7. Place your DVD 4.7 GB/120 min disc in the burner, in the burn dialog, have a check mark next to "Fit Content to Available Space". Hit Burn.
    If you decide to take the Timeline to YouTube instead,
    Publish+Share/Social Websites/YouTube, using Presets = Flash Video for YouTube (Widescreen)
    Hit Next and follow the instructions.
    (Upload to YouTube from within Premiere Elements 12 has limits of 2 GB and 15 minutes. Anything exceeding that, you need to export to file saved to the computer hard drive and then upload that file to YouTube at the YouTube web site where you might be able to get extended limits.
    Please let us know if you are OK with the above information.
    Thanks.
    ATR
    Add On...If you want to "decorate" the black borders in the Timeline content, drag the video to Video Track 2 and put a colored background on Video Track 1 directly below the Video Track 2 content.

  • Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

    Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

    Read this
    http://support.apple.com/kb/ts1583

  • Record multiple, simultaneous sessions through one webinar meeting room

    Is there a way to record multiple, simultaneous sessions through one webinar meeting room? I know breakout rooms can't be recorded, but is there another way to have users join a main webinar room, select a sub-room/session they're interested in, and then join that sub-session? We want to have four sessions happening at once and allow users to choose which they want to participate in. We'd also like to record the sessions. Thanks for any help you can provide.

    Use PPT, or a tool of your choice, to create a slide/object with links to each room. Then the user can click between the rooms as desired.
    You may want to use the ?launcher=false command at the end of the URLs to keep the individuals from having the add-in launched multiple times and in multiple rooms at the same time. This will keep the meetings in the individual's browser.

  • Possible to edit recording created through LSMW?

    I created a Batch Input Recording through LSMW. In the recording, a node has got created which doesn't have an OKCode. As a result, when I process the recording, the transaction halts in between due to lack of OKCode (I have pasted a part of the recording at the bottom. The node in Bold Italic is the problem.)
    In order to overcome this issue, I have to edit the recording & remove the node completely. OR I could create an OKCode entry (for an ENTER press) in the node. But I am not able to edit the recording. I am only able to add & delete Screen fields. OKCode not being a Screen field is not available for addition.
    Does LSMW not give the functionality to edit recordings at all? If it so, how can I use an edited recording created through SHDB in LSMW?
    <u>A partial view of the recording follows:</u>
    >>>SAPLOIRB_APP03 321                                                                               
    BDC_CURSOR                     ROIRB0320-VALID_FROM
        BDC_OKCODE                     =ENTE              
        ROIRB0320-STATUS                                  
        ROIRB0320-VALID_FROM                              
    <i><b>>>>SAPMOIFA 0165                                                                               
    BDC_SUBSCR                     SAPMOIFA
        BDC_SUBSCR                     SAPMOIFA
        BDC_SUBSCR                     SAPMOIFA
        BDC_SUBSCR                     SAPMOIFA
        BDC_SUBSCR                     SAPMOIFA
        BDC_SUBSCR                     SAPMOIFA
        BDC_SUBSCR                     SAPMOIFA</b></i>
    >>>SAPMOIFA 0165                                                                               
    BDC_OKCODE                     =SAVE       
        BDC_SUBSCR                     SAPMOIFA    
        BDC_CURSOR                     OIFSPBL-PBLNR

    I went ahead & completed remaining all the LSMW steps. Then I processed the created session in foreground & tracked the OKCode on each screen.
    It ran perfectly upto the screen prior to the problematic node. When it got to processing the problematic node, the OKCode command dialog box remained empty. This is perfectly understandable since in the recording itself there is no line item for OKCode. Unfortunately, it did not skip processing and move onto the next node which had a 'SAVE' OKCode.
    This is where the transaction halted & manual intervention was required.
    Coming back to square one, I have to somehow get rid of the node or find a way to insert a OKCode line item into the recording.
    Did SAP tell you that it not possible to edit an LSMW recording? It is not possible to use an SHDB recording in LSMW either?

  • Error when calling skillbuilder popup in edit-record mode

    Apexers,
    Iam facing another issue with Skillbuilder modal page(for those who have used this plugins). Ive the CREATE part working well the problem is with EDIT part to edit records via the link i applied all the steps and clicking the edit link pops up the page but the issue is for any clicked row the parameter is not being passed and seleceted record doesnt show on the pop up page where could the problem be? though if i set it back to normal link created by the wizard the edit link works well and shows that record on the editable page.
    Apex 4.1.1/oracle 11gR2 ; issue happens in FF & IE
    any help please?
    thanks.

    Gor_Mahia wrote:
    Apexers,
    Iam facing another issue with Skillbuilder modal page(for those who have used this plugins). Ive the CREATE part working well the problem is with EDIT part to edit records via the link i applied all the steps and clicking the edit link pops up the page but the issue is for any clicked row the parameter is not being passed and seleceted record doesnt show on the pop up page where could the problem be? though if i set it back to normal link created by the wizard the edit link works well and shows that record on the editable page.
    Hi,
    How do you define the "URL Location" in the dynamic action "Settings" region when calling the plugin? Is it "Statically Defined"? If yes, please make sure that you are setting the URL to the target page correctly - you need to set the appropriate page items of the target page in the URL definition.
    If the URL is being set properly, make sure that the target page has a page process (before/after header) to load the contents correctly.
    Apex 4.1.1/oracle 11gR2 ; issue happens in FF & IE
    any help please?
    thanks.So, what happens in other browsers - chrome?

  • Garage Band,  I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band.  Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band?  Any solutions

    Garage Band,  I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band.  Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band?  Any solutions

    10.5.8 with latest garageband 5.1 with MBOX 1. On Nov 4.09 I did a software update, now i get no output volume or input volume to the computer itself. I get it from head phones from my mbox, but not to the computer. Before the software update It worked great. I've tried upgrading software through digidesign .com, but they dont seem to have one for what i need. any way to get my old garage band back? go from 5.1 to earlier? Or maybe it was the upgrade to 10.5.8. update? Can i go back in time lol?
    Any help would be appreciated
    BTW
    Ive tried all the system sound prefs, and garage band drivers. Back and forth.
    cheers
    ds

  • Fader movements not "recorded"

    Sorry for the dumb question, but I've been struggling with this for two days. I'm working with several test projects in the latest version of Logic Pro X and when I set the channels to Touch, Latch, or Write, sometimes their movements get "recorded" and sometimes they don't.  This is project by project, not within one project.
    I've done it before several times with earlier version of Logic and some projects (especially sample projects from tutorials) work fine: as a I play the tracks and move the volume faders, the fades are set and when I then play back, they fade up and down as needed. But other projects just won't work in this way; no matter whether I set it to Touch, Latch or even Write, none of the fader movements play back, even if I change the to Read. This applies to soundtracks I import (via XML) from FCP X or new test projects into which I import various audio files. It also makes no difference if I am using the software faders in Logic or the hardware ones one on the Zoom R-16 I'm using — in some projects it works, in other projects, it just doesn't work.
    What am I doing wrong?

    triglyph wrote:
    no matter whether I set it to Touch, Latch or even Write, none of the fader movements play back, even if I change the to Read. This applies to soundtracks I import (via XML) from FCP X or new test projects into which I import various audio files. It also makes no difference if I am using the software faders in Logic or the hardware ones one on the Zoom R-16 I'm using — in some projects it works, in other projects, it just doesn't work.
    Are you having problems writing new automation and/or playing back existing Automation.
    Problem playing back Automation:
    In that case, do you see the the Control Points and the Automation Curve on the Track Lane?
    Do you see the Automation data in the Automation Event List (open with the Key Command control+command+E)
    When you import a FCPx project with Volume Animation via the Final Cut Pro XML file, the Key Frames should be imported . Do they show up in Logic and do they play back?
    Problem with recording Automation:
    When you have a Track with no Automation yet and you move, for example, the Volume Fader, do you see the Automation Curve (single Automation Control Point with single line), moving up and down?
    Just want to double check that you know the difference between the two Automation Buttons. the bigger one on the Tracks Window's Menu Bar just shows/hides the Automation and the smaller Automation Button on the Track Header, enable/disable the Track Automation on that specific Track.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • HOW TO: Use Input tags to edit records

    The question has been asked, "What does using the BC4J Input data tags provide
    over standard HTML input fields?" It is true that either type of input field allows
    your JSP to take user input and update your BC4J datasource. Both types of input
    fields submit a name-value pair to a JSP processing page that bind the data with
    a datasource row and attribute. However, unless you use the BC4J Input data tags,
    users will not be able to edit data in existing records. To see the difference,
    use the JDeveloper DataPage Wizard to create an Insert Record form and an Edit
    Record form.</p>
    To create the Insert Record form:</p>
    <ol>
    [*]Use the Business Components Wizard to create an entity object and view object for a database table you can update.
    [*]In the same project or another project, if you wish, use the DataPage Wizard to create an Insert Form for the view object.
    [*]Look in your JSP project folder in the Navigator and notice that two pages were generated: one JSP to render the insert HTML form and the other JSP to process the incoming parameters.
    [*]Open the file VO_Insert.jsp and notice that it does not use the BC4J input data tags.
    </ol>
    In the Insert form, the input data tags are not needed to render static HTML form elements such as empty text fields. It is important to note, however, that the name of these text fields corresponds to the attributes of your selected view object. This is extremely important because the processing page looks for parameters corresponding to the names of the attributes to update the view object datasource.</p>
    Now, create the Edit Record form:
    <ol>
    [*]Use the DataPage Wizard again, but this time select Edit Form for the view
    object.
    [*]Open the file VO_Edit.jsp and notice that it uses the BC4J input data tags,
    which contain the prefix <jbo:Input ...>.
    [*]Look in your JSP project folder in the Navigator and again notice that two
    pages were generated: one JSP to render the edit HTML form and the other JSP
    to process the incoming parameters.
    [*]Open the file VO_Edit.jsp and notice that it uses the BC4J input data tags.
    </ol>
    In the Edit form, the BC4J input data tags are needed because in this case,
    the page has to query the current value of the record and place that data into
    the text field. The Edit form uses a second page to process the edited values.</p>
    To summarize the differences:</p>
    Use the <jbo:Input ...> data tags when you need to create an Edit Existing Record type of JSP page. This page will query the current data from the view object datasource and display it in each input field.
    OR
    Use standard HTML input fields when you do not need to query the database to show existing records. This is the case in a static Insert Record form where only empty HTML fields are rendered.
    The end goal of each Input tag is to supply a name-value pair to a processing
    page which will then update the database according to the value passed to it.
    For example in order to update the &quot;Ename&quot; column of the Emp table,
    a name-value pair such as Ename=&quot;smith&quot; must be passed via an HTML
    form to a processing page. The processing page will then be able to update the
    table with the new value of the attribute using the following code:
    <jbo:Row id="myrow" datasource="ds" rowkeyparam="MyRowKey" action="Update">
    <jbo:SetAttribute dataitem="*"/>
    </jbo:Row>
    </p>
    By setting the attribute 'dataitem=&quot;*&quot;' in the SetAttribute tag,
    it is able to update all database columns where a name-value pair is supplied.
    The SetAttribute tag must be used inside of the Row tag to allow an operation
    on a single row.</p>
    The Row tag is able to identify a specific row through the rowkeyparam attribute.
    The rowkeyparam takes the HTML request parameter that contains the value of
    a BC4J rowkey. It is the BC4J rowkey that uniquely identifies the row within
    a rowset. By default Row tag by default obtains the rowkey for the cu rrent row.
    (You can also specify the row when you want to perform a Find action as explained
    in the OTN topic &quot;How To: Navigating Using DataTags&quot;.)
    </p>

    Ok. I didn't understand your question.
    You have to do some settings for adding new  rows for the analysis grid in Analyzer. And in the new rows you can input the characteristic values. To enable the new rows
    In Analyzer - uncheck the setting Suppress New Lines in the proprties of the Analysis grid item.
    In WAD - Check the property Number of New Lines (NEW_LINES_COUNT) of Analysis grid item. You use this parameter to insert any required number of empty rows into the table. The parameter is set to 0 by default.

  • Movie not recording in QT with isight cam

    Hi all,
    My isight is properly connected to my G4 MDD via firewire port. I get this message trying to save my movie clip," Recording failed because no data was received. Make sure media input is turned on and playing." My iSight is connected and working fine. I see green light on front and audio is working. What can it be?
    Thanks for your help
    Web dude

    Hi
    My iSight connection is up fine when viewing it on my Apple profiler. I also did an audio test and it came up fine. I also connected my iSight cam to my G4 AGP tower and it works perfectly. What can it be that my G4 MDD displays "no recording was received."
    Web dude

  • In ALV Reports, i want to edit records manually in out put display

    hello all,
    in ALV Reports, i want to edit records manually in out put display. how can i do that?

    *& Report  ZTEST1
    REPORT  ztest1.
    TYPE-POOLS: slis.
    DATA:i_sbook TYPE STANDARD TABLE OF sbook INITIAL SIZE 0,
         i_sbook1 TYPE STANDARD TABLE OF sbook INITIAL SIZE 0,
         i_fieldcatalog TYPE slis_t_fieldcat_alv,
         wa_fieldcatalog LIKE LINE OF i_fieldcatalog,
         wa_sbook TYPE sbook.
    DATA:wa_layout TYPE slis_layout_alv.
    SELECT-OPTIONS:
    s_carrid FOR wa_sbook-carrid.
    AT SELECTION-SCREEN.
      IF s_carrid IS NOT INITIAL.
        SELECT COUNT( * )
          FROM scarr WHERE carrid IN s_carrid.
        IF sy-subrc <> 0.
          MESSAGE e000(ztest) WITH 'Invalid Airline Code'.
        ENDIF.
      ENDIF.
    START-OF-SELECTION.
      SELECT *
        FROM sbook
        INTO TABLE i_sbook
        UP TO 50 ROWS
        WHERE carrid IN s_carrid.
      CHECK sy-subrc = 0.
      i_sbook1[] = i_sbook[].
      DATA: l_repid TYPE syrepid VALUE sy-repid.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
        EXPORTING
          i_program_name               = l_repid
          i_internal_tabname           = 'I_SBOOK'
         i_structure_name             = 'SBOOK'
          i_client_never_display       = 'X'
    *   I_INCLNAME                   =
    *   I_BYPASSING_BUFFER           =
    *   I_BUFFER_ACTIVE              =
        CHANGING
          ct_fieldcat                  = i_fieldcatalog
        EXCEPTIONS
          inconsistent_interface       = 1
          program_error                = 2
          OTHERS                       = 3
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      LOOP AT i_fieldcatalog INTO wa_fieldcatalog.
        IF wa_fieldcatalog-fieldname = 'SMOKER'.
          wa_fieldcatalog-edit = 'X'.  " REUSE_ALV_GRID_DISPLAY
    *      wa_fieldcatalog-input = 'X'.  " REUSE_ALV_LIST_DISPLAY
        ENDIF.
        MODIFY i_fieldcatalog FROM wa_fieldcatalog TRANSPORTING edit input.
      ENDLOOP.
      wa_layout-window_titlebar = 'My Title'.
      wa_layout-zebra = 'X'.
      wa_layout-colwidth_optimize = 'X'.
      DATA repid TYPE syrepid VALUE sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program = repid
          i_callback_pf_status_set = 'SET_PF_STATUS'
          i_callback_user_command = 'SUB_USER_COMMAND'
          is_layout        = wa_layout
          it_fieldcat      = i_fieldcatalog
        TABLES
          t_outtab         = i_sbook
        EXCEPTIONS
          program_error    = 1
          OTHERS           = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    *&      Form  sub_user_command
    *       text
    *      -->R_UCOMM      text
    *      -->RS_SELFIELD  text
    FORM sub_user_command  USING r_ucomm LIKE sy-ucomm
                                       rs_selfield TYPE slis_selfield.
      CASE r_ucomm.
        WHEN '&IC1'.  "Double click
          IF i_sbook1[] NE i_sbook[].
            MESSAGE i001(00) WITH 'Hmm...some data changed'.
          ENDIF.
      ENDCASE.
    ENDFORM.                    "sub_user_command
    *&      Form  set_pf_status
    *       text
    *      -->RT_EXTAB   text
    FORM set_pf_status USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'ZSTANDARD'.
    ENDFORM.                    "set_pf_status

  • Move to record error - update

    (sorry, minor update to previous post...)
    Hi all,
    I have an error which doesn't for some reason (doesn't)
    always rear it's
    ugly head.
    Basically it's part of the repeat region/move to record
    functionality of
    DreamWeaver 8
    The error message is:
    Microsoft OLE DB Provider for SQL Server error '80040e14'
    Could not find prepared statement with handle -1.
    This is the code block:
    ' reset the cursor to the beginning
    If (MM_rs.CursorType > 0) Then
    MM_rs.MoveFirst
    Else
    MM_rs.Requery ' this is the offending line
    End If
    I'm working with ASP vbscript with SQLServer 2005
    Does anyone have any ideas what is going on and hopefully a
    remedy?
    Many thanks
    Justin

    This seems to be related to Bug# 3537056.
    Please contact Worldwide Support and register that you are running into this bug. Unfortunately, the bug doesn't list a workaround at present.
    Once you have correctly set SelectMethod=Cursor and passed the -Djbo.sql92.locktrailer=null runtime parameter to avoid using the FOR UPDATE clause, you hit an issue when the UPDATE statement is issued that our developers are looking into.

  • Move to record error

    Hi all,
    I have an error which doesn't for some reason always rear
    it's ugly head.
    Basically it's part of the repeat region/move to record
    functionality of
    DreamWeaver 8
    The error message is:
    Microsoft OLE DB Provider for SQL Server error '80040e14'
    Could not find prepared statement with handle -1.
    This is the code block:
    ' reset the cursor to the beginning
    If (MM_rs.CursorType > 0) Then
    MM_rs.MoveFirst
    Else
    MM_rs.Requery ' this is the offending line
    End If
    I'm working with ASP vbscript with SQLServer 2005
    Does anyone have any ideas what is going on and hopefully a
    remedy?
    Many thanks
    Justin

    no reply so far but I found some hints on the net. Something
    to do with the
    data type or bytes. Couldn't work a solution so...
    A work around is to revert to pre "SQL Injection" recordset
    update what ever
    update that was. Essentially use MX recordset. I've not had
    the error
    since...
    Would be nice to know what is going on and a proper solution
    but until
    then...

  • DB tools move to record N rows disappear

    Hi All,
    I really don't understand what's happening... I created a vi that queries the rows in a table (the result is a recordset), and the number of the rows (the result is an integer). than, here comes a for-loop, where N is equal to the previous integer. In this loop, I use DB tools move to record N to retreive the data of each row. In the first round (i=0), I get the results for each column right, I save this row into an another database, than I delete it from here, from this table. Than, i=1 is the next one, but here the vi, move to record N (=1) pops up an error, that we reached BOF or EOF, which means that we have no more rows. It seems if the row was erased from the recordset, too. However, the resultset shoud be untouched, at least the query is out of the loop, of course.
    could somebody help me in this topic?
    I use Labview 8.2 and DB connectivity toolset
    Attachments:
    localsaved.vi ‏65 KB

    Hi all, I think I solved it, but still curious why it didn't work in the first version. Now at the Move to record N vi I wired a constant 0, so it takes every time the first row in the resultset, which is always the next one after deleting... crazy, isn't it?

Maybe you are looking for