Move Exchange Server 2010 SP1 databases and log files to another partition

My company has been running Exchange Server 2010 SP1 on virtual machine for almost three years. My colleague created this virtual machine (Windows Server 2008 R2 SP1) before Exchange Server installation with following partitions:
C partition - for Windows Server 2008 R2 SP1 OS (size 40 GB)
E partition - for Exchange Server 2010 SP1 databases and logs (size 410 GB)
Those two partitions are on the same virtual hard disk "next to one another" so I can not extend C partition which gets filled up with IIS logs (when C partition free space is under 10 GB I am backing up these logs with backup software and afterwards
deleting them thus freeing up space on C partition). I have 2 databases (along with Public Folders) and size of these databases and their logs is around 235 GB.
Is it safe to move these databases and their logs to another partition which I would create on separate virtual hard disk for this purpose only and how much time this process might take since during this process databases
would be dismounted and inaccessible to all users? He made big blunder in my opinion but I have to solve this.

Yes, its safe to move the DB/Logs. You can follow the procedure mentioned in this article to do it via EMC or Shell... http://exchangeserverpro.com/move-exchange-2010-database-folder/
But it depends on various factors on how long it is going take, like size of the database/logs, server performance, storage performance etc...
Besides this, upgrade Exchange 2010 SP1 to SP3, SP1/SP2 aren't supported anymore! http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
Blog |
Get Your Exchange Powershell Tip of the Day from here

Similar Messages

  • Exchange Server 2010 - DAG - Physical and Virtual

    Hi All,
    we are trying to configure Exchange Server 2010 SP1 DAG with TWO Servers, we are getting the error sector size on log file header was mismatch
    1) Physical Server -  when we check the sector size on log file - 512 bytes   (RAID5)
    2) Virtual Server  -  when we check the sector size on log file - 4096 bytes
    is there any workaround to solve this issue or do i need to re-install the physical server with 4096 sector size..
    When i check the Volume details on both machine
    1)
    Bytes Per Sector  :               512
    Bytes Per Physical Sector :       <Not Supported>
    Bytes Per Cluster :               4096
    Bytes Per FileRecord Segment    : 1024
    2)
    Bytes Per Sector  :               512
    Bytes Per Physical Sector :  4096
    Bytes Per Cluster :               4096
    Bytes Per FileRecord Segment    : 1024
    MCITP

    Hi Jared,
    I've got a question regarding your answer.
    We have an existing Exchange 2010 DAG configuration with 3 mailbox servers in NL and 3 in the UK.
    2 for normal databases at each site and 1 for Archive databases at each site.
    The current Mailbox servers for the Archive databases are Hyper V 2008 R2 based VM's with a passthrough for storing the databases.
    We now want add 1 new Mailbox server for storing archive databases at each site and add them to the DAG.
    Can we use Windows 2012 Hyper-V hosts and create the new VM's with 4k sectorsize vhdx files for the new mailbox servers ?
    Regards
    Misha Verhoeven 

  • Upgrade directly from Exchange Server 2010 SP1 to Exchange Server 2010 SP3

    Hi,
    We have current setup with Exchange Server 2010 SP1 ( DAG & CAS Array with WNLB).
    Can we upgrade directly from Exchange Server 2010 SP1 to
    Exchange Server 2010 SP3 . ? 
    Thanks in Advanced.
    Regards,Ali

    Hi Ali,
    Yes, you can. Please upgrade your Exchange 2010 SP1 server roles in the following order: Client Access, Hub Transport, Unified Messaging, Mailbox, Edge Transport. What's more, please note that when you install a Service Pack or update rollup on a server
    that's a DAG member, several services will be stopped during the installation, including all Exchange services and the Windows Cluster service.
    For more information, here is a helpful article for your reference.
    Installing Update Rollups on Database Availability Group Members
    http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Exchange Server 2010 SP3 Databases are not mounting after the recovery process

    Hi,
    We are using Exchange server 2010 SP3 in our office. Databases are stored in an ISCSI drive mapped with the exchange. We are taking daily full backup of my Exchange server using Symantec Backup exe 2012. As a testing purpose I created a test environment
    same like my existing live environment to check the disaster recovery and backup. Thankfully disaster recovery worked well and I am able to open the exchange management console and powershell. But I am not able to mount the recovered databases ending
    with an error saying "Couldn't mount the database that you specified. Specified database: officialrecover; Error code:
    An Active Manager operation failed.........." and even I am not able to use the utility eseutil.exe to the database with an error "access to source database failed with jet error 1811". I am able to create a new database and mount
    it.
    I am using Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 in the Live environment with 3 partitions called C (279 GB), E (4.46 TB, ISCSI), F (976 GB) in my Live environment.
    For test it is Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 with 3 partitions C (240 GB), E (1.4 TB), & F (240 GB).
    Please help me with your valid comments to solve and mount the database and close the issue for ever.
    With Regards
    Jay

    Jared is correct that in essence the message is saying the DB cannot be found.
    When you restored to your recovery server are all the paths the same, i.e. if the DB existed on E:\XYZ on the production server it must be the same on the recovery server
    When you restored into the recovery site do you have AD restored into that site as well?
    For the recovery server are you using iSCSI storage for it as well?   If so am I correct to assume that you have copies of the databases just for use on this server and are not trying to reference the same instance of the DB from the production
    and test/recovery server?
    I have also seen an issue where DB's getting written to disk from Symantec mess up the header of the DB.  If you want to validate that the DB is actually intact and accessible you might want to check out our DigiScope product
    http://www.lucid8.com/product/digiscope.asp using a free DEMO license.  If it works i.e. you are able to mount in DigiScope from same location where its failing on the recovery server we know the
    DB your pointing at is good and accessible from the current path but something else is amiss in your configuration
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
    2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • Regarding MSExchange Active Manager perfmon counter for exchange server 2010 sp1

    Hi
    Instance for MSExchange Active Manager perfmon counter is not created on Exchange Server 2010 SP1 but for MSExchange Active Manager Client and MSExchange  Active Manager Server instances are created.
    Will any can tell me why i am not getting any instance for MSExchange  Active Manager  on Exchange Server 2010 SP1.
    Thanks
    Sandeep Gupta
    Sandeep Gupta

    We are getting the below error on HUB/CAS server past 4 days continuosly.
    Event ID- 106
    Source - MSExchange Common
    Description -
    Performance counter updating error. Counter name is Unique servers queried, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not
    a custom counter, it has to be initialized as ReadOnly. at System.Diagnostics.PerformanceCounter.Initialize() at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 5264 is not running. at System.Diagnostics.Process.GetProcessById(Int32 processId, String machineName) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Processes running while Performance counter failed to update: 984 svchost 2952 rotatelogs 2360 conhost 6296 WmiPrvSE 1372 NSClient++ 564 lsass 8036 powershell 2944 cmd 2352 cmd 1896 exfba 25748 conhost 7076 store 2936 rotatelogs 372 csrss 10024 fscvsswriter
    1552 rotatelogs 8436 MSExchangeTransport 2928 cmd 4304 msexchangerepl 1544 FSCMonitor 164 svchost 556 services 6264 beremote 2524 Exclaimer.Connectors.MailRules.ExchangeUpdateService 1108 bedbg 4492 FSCController 748 svchost 4964 WmiPrvSE 9972 svchost 4484
    MSExchangeMailboxReplication 1724 inetinfo 5872 MSExchangeTransportLogSearch 2116 cpqnimgt 34620 conhost 5660 MSExchangeThrottling 7432 FSCScheduledScanner 4720 WmiPrvSE 928 svchost 1852 WmiPrvSE 1516 FSCEventing 1980 SMSvcHost 11804 svchost 3876 Microsoft.Exchange.EdgeSyncSvc
    5252 Microsoft.Exchange.Search.ExSearch 10176 w3wp 1704 hpwmistor 9764 svchost 2684 Microsoft.Exchange.AntispamUpdateSvc 516 winlogon 10956 MonitoringHost 2088 svchost 2480 conhost 9852 FSEMailPickup 2280 cqmgstor 1884 cmd 1684 sysdown 1288 vcagent 672 svchost
    1088 svchost 8572 FSCTransportScanner 6404 w3wp 4236 FSCTransportScanner 11936 MonitoringHost 8568 conhost 2460 rotatelogs 4428 Microsoft.Exchange.RpcClientAccess.Service 880 svchost 4716 Microsoft.Exchange.Pop3 7376 FSCRealtimeScanner 480 svchost 8556 EdgeTransport
    4024 MsExchangeFDS 2248 cqmgserv 840 svchost 276 smss 1260 w3wp 9728 svchost 7328 FSCRealtimeScanner 3028 hpsmhd 4080 FSCConfigurationServer 34088 TrustedInstaller 8088 w3wp 1052 spoolsv 1248 cpqrcmc 4836 conhost 9320 w3wp 7544 taskeng 5376 Microsoft.Exchange.ServiceHost
    1632 svchost 1628 snmp 7536 FSCRealtimeScanner 836 FSCTransportScanner 1032 conhost 1228 cissesrv 8712 FSCTransportScanner 15700 cmd 436 wininit 828 LogonUI 1812 smhstart 2400 hpsmhd 428 csrss 21176 w3wp 13032 Microsoft.Exchange.Monitoring 6520 mad 4800 MSExchangeMailSubmission
    4360 Microsoft.Exchange.Pop3Service 8944 FSEContentScanner64 1932 msftesql 6324 w3wp 4216 cqmghost 572 lsm 8764 powershell 1592 HealthService 4152 MSExchangeMailboxAssistants 2304 Exclaimer.PolicyProcessingEngine.RemoteDeploymentService 9944 svchost 2572 Microsoft.Exchange.AddressBook.Service
    2492 cmd 1388 Exclaimer.PolicyProcessingEngine.ConfigurationService 1780 MSExchangeADTopologyService 4536 Microsoft.Exchange.ProtectedServiceHost 4 System 11844 msdtc 7488 FSCRealtimeScanner 7520 WmiPrvSE 0 Idle Performance Counters Layout information: FileMappingNotFoundException
    for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name : Global\netfxcustomperfcounters.1.0msexchange active manager client at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String
    name, Boolean writable) at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable) at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String
    categoryName)
    Same error is coming for diffrent performance counter as well like ..MSExchange Throttling, MSExchange Middle-Tier Storage, MSExchange ResourceHealth.
    Could some one help me on the same.
    Above steps can be follow to avoid this error???
    Thanks in Advance.

  • 2005 database and log file locations

    Is there a SQL query to list where exactly the database and log files reside for all databases on an instance (sql server 2005)?

    You can query the Information form DMV
    sys.master_files (Transact-SQL)
    SELECT *
    FROM [sys].[master_files]
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • KB953804 for delegatesentitemsstyle in Outlook 2003 in combination with Exchange Server 2010 SP1 not working.

    KB953804 Full  title  "Hotfix for An e-mail message does not appear in a user's mailbox if the e-mail message was sent on behalf of the user by a delegate in Outlook 2003." 
    We have this working for ok Outlook 2003 SP3 in combination with Exchange Server 2003 SP2.  Now for mailboxes that are moved to our new Exchange 2010 environment the hotfix stopped working. The sent items get stuck in the outbox of the delegate instead
    of moving to the user in whose name the mail was sent. It does not matter if the user mailbox is on 2003 or 2010 as long as the delegated user is on Exchange 2010 SP1 it fails. We use Outlook 2003 SP3 in online mode.  Does anyone know how to fix this
    or maybe someone knows an alternative way to move the mails to the sent items with Exchange2010 SP1.

    Hi,
    I'd like to know how did you set "send on behalf",from outlook give delegation permission or from Exchange Server give "send as" right?
    Please try to use get-adpermission to verify if the user has "send as" right.
    Manage Send As Permissions for a Mailbox
    http://technet.microsoft.com/en-us/library/bb676368.aspx
    Note: After you grant send as right, please try to restart Microsoft Information Store.
    By the way, do you receive any NDR or error information when you send on behalf of others?
    Xiu

  • Exchange Server 2010 SP1 DR Site Setup

    I will need to setup a new CAS/MBX server in a DR site.  WAN link can max to about 2MB/s speeds
    Main site:  2CAS / 2MBX servers in Load Balanced CAS and MBX1 and MBX2 in DAG of 4 databases
    DR Site:  1CAS / 1MBX but I will place this MBX server in Stretched DAG and have passive copies
    DR SITE:  I would create the 4 databases on the MBX server, but seeding will take 5 days since I have over 800GB for all 4 databases
    If I have backups of my databases in the DR SITE from main site, can I copy them(EDB) and logs and then mount them?  Then add them to main DAG group?  or the only way it can be done is to set up new CAS/MBX servers on same LAN as main servers,
    let them sync and travel the servers to DR site?
    Also, is my WAN link poor in speed for this DR scenario?

    Hi Sectorzero,
    FYI Exchange2010 SP1 and SP2 is out of support. Please upgrade to SP3.
    You can manually seed the database by copying the complete to the exact location in the destination server. Steps below
    1.Run the below command on the current server to get the details
    Get-MailboxDatabase | fl name, edbFilePath, logFilePrefix, logFolderPath
    2. Dismount the database and copy the database folder and logs folder to the server in DR and to thee same directory of server in primary site.
    3. Mount the database.
    4. Add the databases using the below command
    Add-MailboxDatabaseCopy -Identity <DBNAME> -MailboxServer <DRSERVER> –SeedingPostponed
    5.Check the content index state using the command below
    Get-MailboxDatabaseCopyStatus | fl name, contentindexstate, status
    6. Resume/update the database copy.
    Here is the reference
    Resume-MailboxDatabaseCopy “DBName\DRServer“
    7.If status failed you have to update by the below command and make both contentindexstate and status healthy
    Update-MailboxDatabaseCopy DBNAME\DRSERVER –databaseonly
    Update-MailboxDatabaseCopy DBNAME\DRSERVER –CatalogOnly
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Mac performance with Exchange Server 2010 SP1

    Hi All,
    I have some issue with Mac OS X 10.7.2 performance with when setting up new email connection Microsoft Exchange Server.
    1) Use Apple Mail to create a new EMAIL account for an Exchange Account using Auto discover.  Note how long it takes.  In my case, it takes almost two full minutes or more until it comes back and is fully set up (and starts synchronizing the server folders).
    2) Now use Apple mail create a new EMAIL account MANUALLY -- just don't fill in the password... keep hitting Continue until it shows the POP setting.  Select EXCHANGE and then fill in the appropriate details (mail.mydmain.com, check SSL enabled, etc.).  Setting up an account this way takes only a few seconds.
    3) Use Microsoft Outlook 2011 for mac to create new Email account for an Exchange using Auto discover. it takes few second to completed.
    I can summarize that:
    - Use Apple Mail to create a new EMAIL account for an Exchange Account using Auto discover: Slow
    - Use Apple mail create a new EMAIL account MANUALLY: Normal
    - Use Microsoft Outlook 2011 for mac to create new Email account for an Exchange using Auto discover: Normal
    In any case, do you have any solution to fix this issue.

    Hi,
    I'd like to know how did you set "send on behalf",from outlook give delegation permission or from Exchange Server give "send as" right?
    Please try to use get-adpermission to verify if the user has "send as" right.
    Manage Send As Permissions for a Mailbox
    http://technet.microsoft.com/en-us/library/bb676368.aspx
    Note: After you grant send as right, please try to restart Microsoft Information Store.
    By the way, do you receive any NDR or error information when you send on behalf of others?
    Xiu

  • Exchange Server 2010 - High Availability and Disaster Recovery - English (United States)

    We have 2 Exchange 2010 servers and trying to setup HA/failover using DAG setup with DNS Round Robin
    Both servers have mailbox, CAS and Hub roles. We are planning to configure DAG and then setup Network Balancing through DNS Round Robin by creating multiple A records for MX record on the external DNS and internal DNS with minimum TTL. My question is what
    will happen to the emails in transit if one of the servers goes down ?
    I hope this makes sense
    Thank you

    Hi,
    Based on my knowledge, the message can still be delivered.
    Let's look at the process for internal mail flow here:
    1. Microsoft Exchange Mail Submission service
     - Notifies a Hub Transport server role in the local Active Directory site when a message is available for retrieval from a sender’s Outbox
    2. Store driver
     - Retrieves messages from sender’s Outbox
    4. Submission queue
     - Stores all messages on disk until processed
    5. Categorizer
     - Processes one message at a time from the Submission queue
    6. Store driver or Send connecotor
    - Delivers the message to user mailbox if the mailbox is withing the site or in case if it is on remote server delivers the message through a Send connector.
    In your case, the server suddenly goes down after you send message, the messages will be received at last.
    When it comes to DNS round robin for CAS servers, we usually consider the Outlook connectivity. If one CAS connected fails, then Outlook will try to re-establish connectivity to the other IP address.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Belinda Ma
    TechNet Community Support

  • Moving the mailbox database copy from one exchange server to another exchange server 2010 DAG

    Hello Team
    is it possible to the move the passive copy of database and logs from one server to another exchange server in the same DAG with out removing  and deleting the mailbox database copies in exchange 2010
    normaly procedure is
    Remove the mailbox database copies and manually delete the .edb files and logs from the physical location and re-add the mailbox database copy to the new server in the DAG.
    is that any way to achieve to move the passive database copy to another exchange 2010 server in the same DAG ?

    From your note, you appear to have a two-member DAG (with a server hosting your active database, and a second hosting the passive copy), and you want to move your passive database copy from the current passive server to another.  Your note
    about what "the normal procedure is" isn't 100% correct - there are many ways to handle this task, and all can be considered "normal". Why not just add the third server to the DAG and
    add a database copy on that third server?  Once it is fully seeded, you can remove the current passive copy.  This way, you never lose your redundancy.
    Yes i can add the third and fourth  serve in DAG , but i cannot add the mailbox database copies to the 3rd and 4th mailbox server in DAG as am using RTM version of exchange 2010 which is allowing to have only 5 database inclding mailbox datbase copies
    and also currently my lab setup is  two member dag (with a server hosting your active database,
    and a second hosting the passive copy) in the same site named SITE A
    and recently i have created new SITE B and included the 3rd and 4th DAG members in the same DAG
    i want the  mailbox database copies from the mailbox server  database  in SITE A  to
    Mailbox server database in  SITE B as  passive copy
    That is why i want to move the mailbox database without deleting / removing it manually
    Hope you understand my situation!

  • Exchange Server 2010 - Message Tracking Logs - Log file creation

    Hi,
    I would like to find out on the behavior of the exchange server in the way that it logs the message tracking.
    Currently the parameter used is 
    MessageTrackingLogMaxDirectorySize - 10GBMessageTrackingLogMaxAge - 30daysI would like to check when the Max Directory Size has exceeded the value indicated, does Exchange server immediately deletes the oldest log file to make space for the new logs?And in the event that the oldest file is being open or locked, will exchange server delete the next oldest file? or it will reattempt to delete the "locked" file for a period of time?Lastly, when these "oldest" files is not able to be deleted, will exchange server stops logging new tracking events?Thanks!

    Hi Zack,
    Thank you for your question.
    If you have configured the parameter of “MessageTrackingLogMaxDirectorySize” and “MessageTrackingLogMaxAge”, we think you have enable circular logging, it will delete the oldest message tracking log files for new log file when the either of the following
    conditions is true:
    The message tracking log directory reaches its specified maximum size.
    A message tracking log file reaches its specified maximum age.
    In addition, it didn’t exceeded the value indicated.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Service 'MSExchangeADTopology' failed to reach status 'Running' while installing Hub transport role of exchnage server 2010 sp1 on Window Server 2008 r2

    Hi
    Getting this error while installing hub transport role of exchange server 2010 sp1 on window server 2008 R2.
    Hub Transport Role
    Failed
    Error:
    The following error was generated when "$error.Clear();
              if ($exsSid -eq $null -or $exsSid -eq "")
              $exsSid = get-ExchangeServerGroupSID -DomainController $RoleDomainController
              start-setupservice -ServiceName MSExchangeADTopology -ServiceParameters $exsSid,$RoleDomainController
            " was run: "Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.".
    Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Elapsed Time: 00:25:35
    Sandeep Gupta

    Hi,
    It might be a permission issue.
    1 :
    Add Manage auditing and security log Properties
    Administative Tools > Local Security Policy > Local Policies > User Rights
    Assignment > Manage auditing and security
    Add
    Exchance Servers.
    2. Check Exchange Trusted Subsystem
    1)Open Active Directory Users and Computers
    2)Under domain name (For example contoso.com),navigate to the Builtin Container,on
    the right hand side select the Administrator group,goto the properties
    3)Click members tab and add Exchange Trusted Subsystem
    4)Click ok twice
    5)Reboot the Exchange server
    6)Rerun the Exchange setup
    Best Regards!

  • AD Database and Log Bogus Free Space Alerts

    For some reason one of our Domain Controllers is generating a SCOM alert for "AD Database and Log : Free space (KB) on drive C: is lower than the required reserved space for AD Database and Log file. It should be at least 700000 KBytes."  The
    thing is that drive has 111 Gig free.  We are running SCOM 2012 SP1 with CU3.  AD MP version is 6.0.8228.0 and the offending DC is running Server 2012 R2.  We have other 2012 R2 DCs that don't have this issue so I'm a bit puzzled.  Thought
    I'd see if anyone else is having the issue.

    Hi
    SCOm do not see the size of the drive it looks size of AD DB and log file refer below link for more information on monitor
    http://technet.microsoft.com/en-us/library/dd262025.aspx
    Regards
    sridhar v
    According to your link it does look at the size of the drive.  There was a bit in there that struck me though, it said
    "During this initial replication cycle, the database and log file sizes are expected to grow significantly. This growth is not reported by the script as an error. However, for a new domain controller, the script still reports any low-disk-space conditions."
     I'm guessing this is what happened.  Thanks for pointing me in the right direction.

  • Exchange 2010 update after Update Rollup 5 for Exchange Server 2010 (KB2407113)

    Mine exchange server 2010 standard has Update Rollup 5 for Exchange Server 2010 (KB2407113) as latest update.
    Can someone help me which update i can install after this, can i start with
     Update Rollup 1 for Exchange Server 2010 SP1.
    Many thanks in advance

    My recommendation will be:
    Remove update roll-up 5
    Install SP1 check that everything is working
    Install SP2 check that everything is working
    Install SP3 check that everything is working
    I think it will be risky for you to go straight to SP3.
    Exchange Blog:
    www.ntweekly.com
    MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

Maybe you are looking for

  • Error while compile a form In R12

    Hi all, I am tryng to compile a Form in R12, But it is showing below error [applmgr@apps US]$ frmcmp_batch.sh module=XXDARXTWMAI.fmb userid=apps/apps@VIS Module_Type=FORM Forms 10.1 (Form Compiler) Version 10.1.2.0.2 (Production) Forms 10.1 (Form Com

  • How can I Route to two proxies or business services with out split join

    Hi, How are you? I´m trying to use a proxy to invoke 2 other proxiers or more at the same time but when trying to build a Split Join is giving an Error about the Security that is in the WSDL which is WSSecurity, so far I think that SPlit Join can´t h

  • JDBC Receiver Adapter:Incorrect syntax near the keyword 'FROM'

    Hi All, I'm trying to get data from an SQL 2005 server using synchronous JDBC receiver adapter. I'm using PI 7.0. My outgoing message is as follows:   <?xml version="1.0" encoding="UTF-8" ?> - <ns0:MT_IZIN_YUKU_REQ xmlns:ns0="http://holding.com/brd/"

  • VS Professional 2013 Downloaded License Is Insufficient

    After adding a VS Online Professional license to a user account, and attempting to login with VS, clicking Check for an updated license, it simply returns "Downloaded license is insuffiicent" I have checked multiple times that the license is applied

  • Camera is set to sRGB, but Aperture metatdata says Adobe RGB

    I have my Canon 40D's color profile set to sRGB, even though I get the impression that it serves no purpose if I am shooting RAW images (which I am). Even if it makes no difference in RAW, I still have to choose a profile in the camera's settings (I