Move filter and settings in WD ALV toolbar to the left ?

Hello WD abap experts,
The WD ALV has one big disadvantage: When you have many columns, the alv table is very wide and if you then want to set the filter or change settings, you have to scroll all the way to the right to click filter or settings, then scroll back all the way to the left to change the settings.
I wonder if I could change the layout of the toolbar in a way that the filter and settings links appear first on the left, (before the view dropdwon) instead on the right.
Has anybody done this ? I cannot find the view in SE80, probably it is generated dynamically ?
Johannes

Hi,
Check the cl_Salv_wd_config_table for the standard functions settings. I guess there is no option to move them left.
if_Salv_wd_standard_function or filter setting ones...check them out..
Regards,
Lekha.

Similar Messages

I have just connected my new apple tv, in the main menu I see only two icons; "computers" and "settings". Where do I find the icons for internet, movies etc. We do not live in the US..

I have just connected my new apple TV and in the main menu see only two icons: computers and settings. How do I access the rest of the icons (internet, movies etc...) We do not live in the US. The unit has full WiFi access with no problems, I can access ITunes on my laptop via home sharing no problem.

Glad that this solved your problem but if you searh past threads there are a LOT of people with identical problems.
Reading through the threads my take is
There seems to be something awry with wifi chipset. Typical symptoms are initially being able to connect to connect to a Wifi network then the connection is dropped. Then you see just the 'computers' and 'settings' icons on screen
Power off, reset and factory restore doesnt seem to solve it
Occasionally its nearby antenna cables etc causing interference
One report with convincing evidence it was the HDMI cable, swapping to anotehr cable fixed the problem
Plugging in ethernet works, this is purely a wifi issue
Sometimes plugging in ethernet temporararily wakes up the wifi
Many people seem to have exchanged their units only for the same thing to happen to the new unit a few weeks later. Just wondering if its a fomponent fail or heat issue.

What's the best audio filter and settings to eliminate echo?

I shot an interview in a hallway. What's the best audio filter and settings to reduce/eliminate echo?

There isn't one. You will be trying to remove the same frequencies as those you want to keep.
Reshoot it, strategically position some heavy drapes and use close miking such as a lav and reliable monitoring quality headphones.

I've erased all my content and settings but back up doesnt finish the process to set it up. What can i do ?

I've erased all my content and settings but back up doesnt finish the process to set it up. What can i do ?

You have two choices. You can select another backup. I believe that your three most recent backups should be presented as choices. If for some reason you only have one backup and it will not restore, you have to restore as new.
Do you see other backups when you are at that step in the activation process?

I downloaded IOS 6 and using the apps movies , books and I-store I get connected to the USA store and not to the Dutch one like before. So i cannot update my purchaged apps. How can I change this ?

I downloaded IOS 6 and using the apps movies , books and I-store I get connected to the USA store and not to the Dutch one like before. So i cannot update my purchaged apps. How can I change this ?

Have you looked on all the pages of your iPod? Have you looked in all your folders? Have you you tried finding the apps using the iPod's search page.
PS: Offering points in advance is a violation of there terms of service for this forum. Perhaps it's why you have not received any other answers so far,

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?
Thanks

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

I am in my e-mail and a keyboard came up but only the left hand-side of the keyboard and I can't get rid of it, any idea how to make it go away?

I am in my e-mail and a keyboard came up but only the left hand-side of the keyboard and I can't get rid of it, any idea how to make it go away?

Have you turned the phone off? If so, and it hasn't fixed the issue, try a reset:
Press and hold the Sleep/On/Off button and the Home button at the same time for approximately 10-15 seconds. Ignore the slide to turn off indicator, and wait for the Apple logo to reappear. Release buttons. No content will he changed with this process.
Stedman

How to move Documents and Settings and All Libraries To D drive to separate from the OS

I want to move my Documents and settings Folder to D drive so I can back up the OS separate from Data or at least move Libraries to D drive. I have partitioned my hard drive so that most of the space is on D drive and about 100G is on C drive. I can't understand why the old My Documents file structure was changed where now it is called Libraries and My Documents is a sub folder to that and My Music, My Picture etc are not in My Documents anymore. Let’s just randomly shuffle directories to enhance the Window 7 experience. If you have not already figured out I am an XP user. I know there is a way to do what I want to do because virtually all corporate systems are setup this way.
Oh how the heck to I get access to Documents and Settings? Well sometimes programs hide stuff there. Like why does Zune software hide your album art in documents and settings that you spent hours downloading and fixing so that when you move my music that all your album art does not go with it.
Perry

Hi,
In Windows Vista and Windows 7, the “My Documents and Settings“, has been replaced by "Users". The My Documents, My Music, My Pictures, and
My Videos folders in Windows XP are transferred to the following folders in Windows 7:
%systemdrive%\Users\user_name\Documents
%systemdrive%\Users\user_name\Music
%systemdrive%\Users\user_name\Pictures
%systemdrive%\Users\user_name\Videos
You can find your user files in the above folders and move them to the drive you like.
For more information, please refer to
http://support.microsoft.com/kb/930128
http://support.microsoft.com/kb/930890
It applies to Windows 7.
Hope it helps.
Vivian Xing - MSFT
When I visit the two quoted knowledge base links from Windows 7 I get -
System TipThis article applies to a different version of Windows than the one you are using. Content in this article may not be relevant to you.Visit the Windows 7 Solution
Center
In other words your reply does not apply to Windows 7.
Do you please have an answer which does apply to Windows 7?
Cheers,
Brian Towers

Why am I only seeing Movies, Computers, and Settings in ATV2?

A few weeks back I started having problems with my Apple TV 2 connecting to Home Sharing. It would not connect to my iMac, iPhone 4s, or iPad (all items that it used to work flawlessly with). I decided after trying many things that it was probably my router that was causing the issue, so I purchased an Airport Extreme, and after setting it up everything was once again connecting to one another.
My Apple TV 2 then came upn and said that it needed to update the software, so I did that. After the update was finished the only things that are showing up on the main page are Movies (shows the 2 recent rentals), Computers, and Settings. I have tried connecting it with both WiFi and ethernet and still have the same issues. Any suggestions?

Welcome to the Apple Community.
Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router.

ALV-Toolbar : Control the &LOCAL& Buttons

Hi, all
I have the following problem with ALV-Toolbar.
If I use editable ALV-Grid Control, I get in the toolbar new buttons such as DELETE_ROW or UNDO. This buttons dont trigger any events of the class CL_GUI_ALV_GRID.
If I look at Function Code of such buttons in the Table mt_toolbar they are quiet similar. All of them have &LOCAL&.
How could I control this buttons with my program .
Many thanks for your help
Vladimir Golovtchiner

Hello Anand,
Thank you for your answers.
I thought that these buttons are belonged to Front-End.
I hope that ALV-Grid is an OCX. Or not? If it is an OCX-Object, is it possible to communicate with it?
I have no any idea now, how to solve that, but I could explain to you why I need to handle these buttons.
I use an editable Grid of CL_GUI_ALV_GRID. For the last two columns I use Drag and Drop to move data from the pre-last column to the last column. It work properly until the following situation:
For example I have two rows in a Grid. I place the cursor to the last row and press the button COPY_ROW two times ( I have 4 rows in a Grid now). Immediately after that I try to do Drag&Drop at the last row (4th) from the Grid. As I drop the cursor on the last cell of the last row I get always the result in the last cell of the 2nd row ( the last row before I insert two rows).
It doesnt matter how many rows I had or how many rows I inserted to the Grid. It happens also in the middle of the Grid not only at the end.
After the first Drag&Drop it begins to work properly.
I debugged the handler of Drag&Drop and I saw that the Drag&Drop object has in the structure E_ROW each time the number of the last row before insertion. I forced the update of backend in the handle of on Drag event with CHECK_CHANGED_DATA before I create the Drag&Drop object and passed the Drag&Drop handle to the internal table. It didnt work.
That is why I thought that I should do this update after each insertion or deletion with these buttons.
In other words I dont want to change the functionality of these buttons I want to add something before.
Best regards
Vladimir Golovtchiner

How can I move the Bookmarks button on the Bookmarks toolbar to the left side, please?

I have just done a full reset to get rid of various problems and am trying NOT to alter things without a good reason as that is probably how I broke it before... but I really do need my bookmarks button on the left!
I cannot discover how to open a customise menu for the bookmarks toolbar??

You should be able to move the Bookmarks Menu button to the left end side of the Bookmarks Toolbar ot to another toolbar while the customize window is open.
*Firefox menu button > Options > Toolbar Layout
*View > Toolbars (press F10 to display the menu bar)
*Right-click empty toolbar area
*https://support.mozilla.org/kb/How+to+customize+the+toolbar

What are the best sequence presets and settings to use in FCE for the best resolution with the least amount on strain on computer?

Hello!
Can someone please help me figure out the best settings to use in order to obtain the best resolution in FCE4 for a television show that is going to be sent out on full size Sony DVcam tapes, with 4:3 aspect ration and audio output at 48kHz? I am currently working with mixed media sources in Final Cut Express, and I am wondering what the best settings (presets and preferences) are, in order to provide the HIGHEST resolution possible, while putting the least amount of strain on my computer system?
I am importing mini DV-standard definition footage and still photos (from Canon Rebel camera, HD CMOS Canon camcorder that records in 1440x1080 at 48 kHz, and cell phone photos). For voiceovers I use the tools in FCE.
I use Voltaic (which I use thanks to recommendations from Apple discussion boards, love it!) to convert the footage from the HD CMOS-Canon HD VIXIA (HG 20) camera, and then I am using print to video to output onto Sony DVcam tapes (full size). This is for delivery for a television network that broadcasts in Standard Definition, so I need to produce the highest resolution and best quality possible that also puts the least amount of stress on my computer system.
If anyone has any recommendations, help, or sources that can help me answer this question I would be greatly appreciative.
Thank you!
Susan Kayne

This is happening because your video clip properties do not match your sequence settings. This is always a problem when you try to insert video from multiple camcorders/cameras (that use different video codecs, frame sizes & rates) in a single sequence.
It will help a lot if you provide more specifics - what FCE easy setup did you use to create your sequence? For your DV footage, are you using standard 4:3 DV or anamorphic 16:9 DV clips?
If you plan to export to standard def (DV/DVCAM) and are mixing DV from a miniDV camcorder, stills, cell phone images and AVCHD then I would suggest that you use the DV NTSC easy setup for your sequence. Use MPEG Streamclip or similar utility to convert your non-DV video (your AVCHD video) to QuickTime/Apple DV-DVCPRO NTSC. Then all your video will match your sequence settings. Yes, you will have to crop the AVCHD footage to 4:3 and you can do that in MPEG Streamclip.

HT201263 I wanted to delete all the information off of my iphone 4 so I could give it to another family member as i have a new phone, i fear i have done the wrong thing by 'erase all content and settings' - now i can you get the phone to load the set up

I wanted to delete the information i had stored on the phone, so thought i had to 'Erase All Content and Settings' however i fear this may of been incorrect, I cannot load the setup on the phone now, all i get is; 'we are unable to contiue with this activation, please try again later or contact customer care, i have tried to do this several times now to no avail

Is the device jailbroken?

I would like to move all toolbars to the left side of the window. My monitor is really wide so that would give me more "real estate."

I have 4 toolbars I would like to have display on the LEFT side of the window. How do I do it?

Just saw your posting from yesterday - https://support.mozilla.com/en-US/questions/876195
https://addons.mozilla.org/en-US/firefox/addon/checkplaces/ <br />
'''Checks your bookmarks are valid and the pages still exist, checks for duplicates ...'''

Does Erase all contents and settings in 2.0.2 wipe the firmware updates?

I am about to sell my ipod touch on ebay and to ensure that all my data is cleared I have used the erase all contents and settings option that 2.0.2 introduced. The question is does this return the touch back to the factory firmware (1.4 I think), unable to check without starting to sync new device to itunes again.

I believe that option has been available since earlier firmware versions. My understanding is that it does not affect the software/firmware on the iPod. From what I've been told, once the iPod is updated to 2.x.x it is not possible to go backward to a 1.x.x version. If anyone's been able to do this successfully, please correct me. You should be able to hold 'Shift' when clicking Restore in iTunes, so you might try that to see if 1.1.4 is an option to restore the iPod to.
CG

Move filter and settings in WD ALV toolbar to the left ?

Similar Messages

Maybe you are looking for