Move forward even on incorrect answer with infinite attempts?

Hello,
I want to use captivate for a summative assessment where students can have inifinite attempts at each question and are able to move backwards and forwards through the quiz. From what I can see at the moment when I set the question level attempts to infinite the slide never progresses until they get the answer correct. I want them to be able to change their answer but move forward on submit even if their answer is incorrect? At the moment I can't seem to see a way of doing this? Is my only option to use custom slides?
Thanks.

You are correct that if you set infinite attempts on a question then Captivate will assume you wanted the student to remain on that question until they got it correct. 
Developers often find it difficult to understand how Captivate's quiz questions work. There are many ways you can configure the question options.  In fact there are good reasons for seemingly bizarre behaviours, but those reasons are often masked by the way your settings are configured.
As a sample: Once the participant submits an answer for a quiz slide (correct or incorrect) and then progresses to another slide, their answer for that slide is locked in.  If you have multiple attempts on that question allowed, AND you have backward movement allowed, THEN your participant can move back to the previous question and reattempt it, but if you don't have the Retry caption or Failure levels turned on, Captivate will then only appear to allow them to submit a correct answer. 
If you want the user to be able to move forward even if their answer is incorrect, just enable the SKIP button on the question slide.  The user can then opt to click this button to move to the next question.

Similar Messages

  • HT4623 While uploading my I phone 5, I came to rescue e-mail step and I am stuck there I can not move forward even though I press the next button

    While uploading my I phone 5, I came to rescue e-mail step and I am stuck there I can not move forward even though I press the next button

    annestenvad wrote:
    I'm not able to run a test myself, right? I'm definitely going back to the repair store tomorrow!
    Wrong!  Check out KB Article:  Intel-based Macs: Using Apple Hardware Test
    Personally, I would not be running no test.  Apple has a 90 day warranty on all their repairs.  Return your computer to the repair shop but this time.......
    When it’s time to pick up your computer from the repair shop:
    *** Before you leave the repair shop, make sure you have the repair tech(s) power the comp up and demonstrate that it is indeed working & repaired properly too your satisfaction.***

  • Quiz Scoring with infinite attempts

    Goal: When the user selects the wrong answer I want them to be able to continue to select answers until they select the correct answer BUT are graded "incorrect" for the score on that slide for picking the wrong answer first. I thought there was a way to do this but cannot find it. Suggestions.....

    Sorry, i wasn't very clear on why I'm looking to do this. I'm actually looking to do it in an assessment rather than a quiz. What I'd like to happen is this:
    -learner is given instructions and they need to click on an area of the screen.
    -the first time they click on the wrong area of the screen, a caption appears giving them a hint (i'm not using the built-in hints in captivate, i've built something else that accomplishes this)
    -the second time they click on the wrong area, a point is deducted from their score, and a caption appears telling them where they should've clicked. right now, i have this set up in captivate with a failure caption. i want the user to be forced to click the right area before they can progress in the assessment (hence the infinite attempts), but i want that second attempt to be scored.
    thoughts on how to do this?? any help is greatly appreciated!

  • Incorrect answer with double calculation

    The output of the program below is inconsistent:
    5.81
    58.099999999999994
    581.0
    public static void main(String[] args) {
    double num = 0.58;
    System.out.println(10*num);
    System.out.println(100*num);
    System.out.println(1000*num);
    How come it works when multiplying by 10 and 1000 but not with 100? I am some how puzzled.

    [Here we go again!|http://docs.sun.com/source/806-3568/ncg_goldberg.html]

  • Unable to connect mac OSX 10.4.11 to wireless network (virgin media) even though iPad, iPhone and laptop ok.  Get message 'password incorrect' even though it works with other devices.  Keep getting message connect to BT unrestricted access.

    Keep getting 'do I want to connect to BT unrestricted network' which I have never used before.  I can get my ISP details input but get message 'incorrect password' even though it works with 3 other devices. My network provider, Virgin Media, sent an engineer but he couldn't solve the problem - said network was all ok so problem must be with my iMac (OSX 10.4.11).  When I try to use internet I get BTWiFi is current wireless network - I've never used this! I've tried to change this and virgin media details are accepted, it's just the password stage that prevents me from connecting. I am not very knowledgeable with computers so I really need a step by step guide to solve this problem.  PLEASE HELP!!!

    Excuse me barging in on the thread, but I have a lot of experience with Telus, and roaming with my BlackBerry (currently a Z10).  In short, you've been fed some outdated info by the Telus rep. Telus has become very Android-centric, and it seems like a good number of Telus CSR's are still reading from a Legacy BlackBerry trouble-shooting guide.
    My Z10 is unlocked, and I periodically use an AT&T sim when traveling in the US.  I have never had to change an email setting to get full email function -- including the SMTP settings.  To put it simply, your device first connects to a network using credentials provided.  At most hotels, for instance, your device will scan for and pick up a WiFi network.  The hotel will tell you the WiFi network name and give you a password to use.  You simply enter the password when prompted, then you may have to agree to certain conditions.  That's it.
    Your email settings are just that.  Using whichever network to which you are connected, the user name and password give you access.  The settings coincide with the email provider's server settings.  These don't typically change with the location from which you are connecting.
    I'd suggest you take a look at this very helpful email settings tool provided by BlackBerry, if you are having difficulty:  http://helpblog.blackberry.com/2013/03/email-account-validation-tool/
    It helps you determine the possible settings for connecting to your email provider.  Different providers offer different connection options, sometimes more than one.  Opinions vary, but my preference in descending order is:  ActiveSync, IMAP, then POP if required.  ActiveSync (aka EAS) and IMAP will offer 2-way sync.
    Take a look at the tool and pop a message back here if you have any questions.  Good luck. ~ecm

  • HT4972 Why must I erase iOS 4 , (restore) iPads 2 to move forward with updates? I don't understand this. Why such an inconvience?

    TWhy must I erase iOS 4 , (restore) iPads 2 to move forward with updates? I don't understand this. Why such an inconvience?

    Because that is how all iOS upgrades are done. The device must first be erased. If you don't like the inconvenience then you are free to do nothing or continue to complain about it. It's your choice.

  • My idvd wont play sound in some parts of my i movie project, even though i can hear the sound in imovie. dont get it??? and at the end of my i movie i added pictures with music. it appears as tough there is some kind of ripple effect when i play in idvd??

    my idvd wont play sound in some parts of my i movie project, even though i can hear the sound in imovie. dont get it??? and at the end of my i movie i added pictures with music. it appears as tough there is some kind of ripple effect when i play in idvd??? i dont know why, i did not add anty effect.

    any suggestions

  • HT201303 i have tried to perchase a movie and it keeps coming up with questions about my past thet i dont remember the answer to. how do i find out the answers? i have never come across these questions until now

    i have tried to perchase a movie and it keeps coming up with questions about my past thet i dont remember the answer to. how do i find out the answers? i have never come across these questions until now

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Please Help! Can't move forward.Portfolio Recovery and Stellar Recovery. WHAT'S NEXT?

    I have the same story most have heard 100x. When I went away to college I racked up debt and made poor financial decisons because I didn't have a good concept of money and Credit. Credit like most teens was this invisible forever giving gift and if I paid the minimums I would be ok'. Suprisingly, my minimum wage retail job didn't provide a stable income and my balances grew. I got overwhelemed really quickly and instead of dealing with the issue. I did a out of sight out of mind. Fast forward to present and I am cleaning up all the mess I made at 18-21 Y.O.  From this site I have made a some nice leaps to the right direction. Last year around this time I was at a 420 now I am at a 612! Recently got engaged and me and my Fiancee are looking to purchase a home by the end of this year/ begining of next year. My income is stable, my career is stable, I have a little savings. The only thing holding me back is CS. I thought my best way to move CS faster is to get my 2 Collections deleted. One is from Stellar Recovery for 152 (old comcast bill/cable) from 2013 and the other is from Portfolio Recovery for 676 (I think old BestBuy cc) from 2012.  I sent Stellar Recover a DV letter it arrived today. I sent the letter because I have heard a lot of positive things about Stellar. That they delete a lot of accounts and they do so quickly. Also, with such a low balance, I am hoping they feel it's not worth the man hours to even try to look for the information. In terms of Portfolio Recovery I sent a DV letter but the address was wrong (got the alert today) so I called Fedex and asked them to return it. I think that might have been a great mishap. I have read many articles and PR and they seem to be known as the Sharks of the Debt Collectors and sometimes sending DV is a death sentence. I recently read article that you may not even be on their radar but when you send a DV you are letting them know you are a person who is conscience about his/her debt and wants to fix it; it's like blood in the water. They will now pursue you without abandon and possibly sue. My question is, should I send the letter or leave it be? I'm just worried since I am in SOL for both I don't want to draw unnessary attention but I also feel like a waiting duck and desperately want to move forward in my life.

    In the same article the repoter was talking to some of the Employees. A staff memeber is quoted as yelling out "We got one" it was a man who had some really large medical expenses and had been unemployed for a very long time. As soon as he got his first paycheck they started in on garnishing his check. They are ruthless. I understand thay "we" owe debt and I understand it should be paid. But sometimes I think we forget about the hummanity of it all.  Your post was really helpful. I can learn from what you went through and avoid PR NightmareCthulhunoodle wrote:
    They absolutely do. They informed me they had another debt under my name. From 1997. Well past the statute of limitations on that one, but I'm sure it won't stop them. Thank goodness I'm smart enough to hang out on this forum and seek sound advice. And the kicker... at the end of the phone call in which I'd paid my years long debt, they asked me why I'd defaulted in the first place. "Pregnant, lost my job and had to move into my mother-in-law's house. Bad time all around." She asked if I was employed now. I answered in the affirmative. Who's your employer, came next. My answer: "I'd prefer not to say." I'm sure if I'd replied it would be logged in a database somewhere, waiting to be used.
    and be on the offense of the situation and not defense.

  • Incorrect Answers freeze assessment

    Hi,
    I am using Captivate 2 and I have a log in simulation where
    the participant must enter a name, a password and then click login.
    On the next screen they need to click a continue button. Very
    simple.
    If they answer correctly they can complete the assessment. If
    they enter the incorrect name or password the assessment stops on
    the last screen and will not move forward - the continue button is
    acting as if its disabled. There appears to the learner that there
    is no way out of the assessment, and that the assessment has
    "crashed".
    Are there any settiongs that could be causing this behaviour?
    SCORM is required, currently set to: Report: Pass/Fail,
    Report quiz results only, reposrt score as percentage, report only
    the score.
    Quiz Settings tab
    Quiz: Pass required
    Setting: only Show score at end is turned on
    Pass Fail optoins:
    Pass set to 90%
    Passing grade is continue.
    Failing grade is infinite attempts, jump to slide 1
    Regrdas,
    Mike

    Contact Mac App Store Customer Service via this link - http://www.apple.com/support/mac/app-store/ - explain your problem - they are the only ones that can get you access. There is no phone support. This is not an iTunes question as the App Store is a different program.
    MJ

  • How do I make a Mouse Trace line (puzzle type) to move forward in a Flash site

    I'm wondering how I would go about making a Mouse Trace, on a line that's preset but my choosing to let people enter into my Flash and/or progress throughout it. Basically, I have a picture of say, the number 5, I want to be able to have people use the mouse cursor to trace the 5 from one end to the next, and once completed the sites move forward. Though, I will be using my company logo which is a bit more advanced than a single number or letter form. If no one is sure what I'm talking about I've added a picture to demonstrate what I'm trying to do.
    Another idea I have if this one can't be accomplished, is a slide bar.
    Basically, it would look like a timeline control in say, VLC, and I would have the user drag a button from one side to the next to unlock and move forward.
    Though that may seem a bit more simple that my main idea, I would also like to be able to get really advanced with this second function and make a series of slide bars, say, 3, and they have to be slid in a certain manner, like slide bar 1,3,2 then it unlocks and moves forward.
    Any and ALL thoughts and ideas are welcome.
    -Splendid Angst

    if you can assume your shapes are traced when a user starts at one point, drags the mouse to your end-point and does NOT go outside the shape boundary, you can use a bitmapdata hittest and loop to check the mouse stays inside your shape and you can check that they start and end within a determined distance of the start and end.

  • How do I "move forward" photos in a photobook (after removing a photo from being placed)

    New to iphoto and Mac.  I've created a Book from 3 projects.  As I'm reviewing the photo book, there are photos I've decided I don't want and they have become Unplaced. 
    I'd like the remaining photos to be "moved forward" automatically - can this be done?
    Same question when changing a layout from say 2 photos per page to 6 photos.  All I end up with is a bunch of empty slots and I don't want to manually move forward a bunch of photos.
    Any tutorials or resources you can suggest would be helpful.  I've tried googling this problem, and am faced with too many answers about people and deleting the photo libraries etc.

    I think what I'm looking/hoping for, is that iphoto could (at least in the beginning stages) "repaginate" my album if there are photos I want to remove.  Just like when making a word document, when you delete some text, the rest of the text moves up and the document gets shorter.
    That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback
    As i answered
    there is no way to move photos forwards or backwards
    so I created an album and iphoto slotted photos in there.  On further review - there are certain photos I just don't want (i.e. not nice enough, detract from overall book etc.).  If I remove something at the beginning, it's alot of manual work to move other photos forward.
    Same question as above - same answer as above
    The other situation is, when iphoto inserts the photos, it might not necessarily keep certain photos together (in this case, it's my parents' trip to Ireland) and we have a preference to keep photos from the same venue together on a page, not split by a page-flip.  This is where I'd want to change a layout from say 2 photos to 6 photos and would like to automatically move the previous pages photos forward to be placed in the new empty slots.
    And for the third time - exactly the same question - and of course exactly the same answer
    I reallly think this is a very clear statement
    there is no way to move photos forwards or backwards
    Am I asking too much?
    You can ask - but what you want is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
    As to your use of the existing features - totally your choice - some people use certain features and other do not - do what you please
    I generally find that if I am careful in selecting photos then Autoflow is a good start - but not always - just depends
    And I usually fill holes with additional photos that I did not originally choose or change the number of photos in the layout I use for that page
    LN

  • When I try to download apps, a message appears saying that to move forward I have to agree to the new terms of the contract, but does not allow me to agree and not low Apps. Someone can explain what is happening?? thank you

    When I try to download apps, a message appears saying that to move forward I have to agree to the new terms of the contract, but does not allow me to agree and not low Apps. Someone can explain what is happening?? thank you

    Delete some stuff to make room on the device.
    iCloud is not local storage and has nothing to do with your situation.

  • Re: Qosmio F60-100 Blue-ray doesn't start movie or even menu

    Hey guys !
    My Toshiba Qosmio F60-100 works perfectly. There's just the blu ray drive that causes problems, because each time I put a Blu ray in, it starts the "Win DVDBD" program but never starts to play the movie or even the menu.
    I just don't know how I can solve this problem.
    I have already tried with the famous update but when I try to install it, i get a message telling me that the update isn't for my computer.
    Thanks in advance for your help.
    Volki

    Yeah I've tried several BDs. It's really strange because sometimes it worked, but after I restarted it two or three times. Now It's the fourth Disk that makes reading problems. Now, I remember. I got to solve the problem once, because I registrated for win dvdbd. It worked .. until I shutted down my laptop. Now it's the same as before.

  • Table in edit Mode with infinite lines ?

    Hi,
    We are designing an application, where as one of the requirement is to have a table with infinite open lines for user input.
    By Default table should be in EDIT mode and user should be able to enter values without the need to click on a line to insert a new row every time he/she wants to input a value.
    How can we acheive this requirement in WDA. In classical dynpro it is very easy to do this.. but I am struggling to find a way around for this..
    Thanks in advance.
    Regards
    Rohit Chowdhary

    Hi Rohit,
    >My experience with tables that are over 1000 lines, showed performance and
    >even stability issues for IE.
    I can only emphasize what Phil said. Especially, in your case with an editable table, displaying more than 50 rows at a time (depending on the number of columns) can cause a bad user experience, because the browser needs to handle all the html and javascript we throw at it.
    Imho there are two solutions:
    (a) Try to use the ALV
    (b) In case you would like to use the table ui element, you could add enough empty context elements to the context node where the table binds to, so that a user has always plenty of empty rows available. A toolbar button could provide the user with more initial lines.
    Best regards,
    Thomas

Maybe you are looking for

  • How to simulate a dml error in order to test try-catch code block inside a stored procedure

    Hi, What would be the easiest way to simulate a dml error in order to test a try catch block. I would like to do it with a simple command from outside the stored procedure if possible. I tried dropping the table that was updated but it hangs Thanks,

  • Why can't I log into my flickr acct?

    I've gone through this problem with tmobile tech support and they weren't able to help. I've posted on flickr and haven't gotten a solution either. my problem is for some reason yahoo is not recognizing my password . I put it in and get the msg "data

  • Not Able to see SAP systems in List of Available SAP Systems for Crystal R

    Hi All, We have installed Crystal reports 2008 and SAP integration KIt client software on my machine. I am trying to create Crystal reports based on the BI query and I could see SAP Connections in the 'Create new connections list' but not able to see

  • USB disk won't spin down

    I tried asking this in the iMac forum, but as it seems to be a software issue, I hope you don't mind me posting it here: I have a new iMac and a Lacie Blade Runner external 4TB USB 3.0 drive.  Unfortunately when I power off the Mac, the Lacie keeps s

  • VMware Tools

    Hello,        I have been using Veeam 7.0 Backup and Replication to backup all of my VMGuest, but I had issues with one of my VMGuest running Windows 2003 Server R2 Standard. I continued to get the error VMware Tools  not running I thought this was a